How to hide a tab in CIC0?
Hello All,
Can You guide Me to hide the 'Details' tab in CRM in the transactiobn CIC0.
Regards
Elini.P
Hi,
Create a Screen variant / Transaction variant by using using SHD0 transaction.
Cheers,
Sasi
Similar Messages
-
How to hide a tab(not a conditional display)
I allready posted this question, but nobody answered me...
Please help. Here is the thread, just read the last message:
how to hide a tab dynamically
VitalyWhy? What are you trying to achieve? What functionality would that provide?
See
http://htmldb.oracle.com/pls/otn/f?p=24317:124
Is that what you want?
The function behind the Toggle link is
<script type="text/javascript">
function ToggleTab()
var links=document.getElementsByTagName('a');
for (var j=0;j<links.length;j++) {
if (links[j].className=='t10standardtabcurrent') {
var td=html_CascadeUpTill(links[j],'TD');
html_ToggleElement(td);
var adj=td.previousSibling;
if (adj.nodeName != 'TD') adj=adj.previousSibling;
html_ToggleElement(adj);
var adj=td.nextSibling;
if (adj.nodeName != 'TD') adj=adj.nextSibling;
html_ToggleElement(adj);
</script>Modify as per your requirements and post your final solution if you use this approach. Thanks. -
How to Hide a Tab related to FPM in Rfx
Hi,
I am new to SRM 7 and I have an issue in hiding a tab which is based on FPM. I went through lot of links and found below steps
1) Add WD interface IF_FPM_TABBED_CONF_EXIT in implented interface of any webdynpro component under AppCC
2) Implement the method OVERRIDE_CONFIG_TABBED to hide a TAB.
My problem is I took standrad webdynpro component /SAPSRM/WDC_DODC_RFQ_H_BI and tried to add IF_FPM_TABBED_CONF_EXIT (in Implemented interface) in enhancement mode. But it is not allowing me add and throwing a message Web Dynpro comp./intf. "IF_FPM_TABBED_CONF_EXIT" already exist.
So could you please tell me how to overcome this issue? and is there any alternative to hide a TAB based a conditions?
Thanks,
RaghuHi
go to SE 80 enter the webdynprocomponents and enter
go to component configurations select the webdynpro component
click start configurator
click change you can see the FPM select the button and hide
In this you can hide for all the users only
Regards
G.Ganesh Kumar -
How to hide report tabs in webi using opendoc?
How to hide a report tabs in webi while accessing that report using OpenDoc??
Is there a way to see just the sReportName selected without show the other
report tab in the bottom of the document??Hi,
As Mention By SUBBARAO MUCHERLA Either create 2 Different Reports.
Or
You can do one thing .
Add Complete Report in a Blank section .
Section (v_sec_All ="All")
--Part1 //Table
--Part2 // Chart
--Part3 //Chart 2
--Part n
Use this section(v_sec_All) in Linking Report Part . -
How to hide custom tab in crmd_order
hello gurus,
In crm how to hide a custom tab (which is created through EEWB Transaction )for particular order types??
ex: if a tab named ADDITIONAL DATA B is holding the info like contact name ,customer PO etc.,here my requirement is to hide that tab for some order types like CR & DR.
Plz help me out in this issue..
Bye--
PradeepaHello Pradeepa,
2 options to replicate the custom data to R/3:
A- via EEWB, flag the 'R/3' flag
extract from doc:
Field Relevant for R/3 Execution?
Specifies whether you use CRM Sales with R/3 Supply Chain Execution, and whether you wish to transfer the field to the R/3 System.
Use
If you set this flag, the system generates a BAdI implementation that transfers the field to R/3 BAPI structures. If your executing system is an R/3 Enterprise System, the system enhances the BAPI structures and tables for sales orders in the R/3 System so that the field is transferred automatically to the R/3 sales order.
So, with this flag, during generation, the whole flow to R/3 and also the fields in the tables in R/3 are created.
B- write your own integration flow via exits/badi in the middleware to integrate the fields into existing fields in R/3 tables.
Regards,
Fred -
Dear Gurus,
As per requirement costing tab is not required in work centre so I want to hide the tab ,how it is possible please advise
Reg.
AravindHi,
For your requirement, Follow below path:
IMG-->Plant Maintenance and Customer Service-->Maintenance Plans, Work
Centers, Task Lists and PRTs-->Work Centers -->Configure
Screen Sequence for Work Center
Work Center Category: Select the appropriate category e.g. 0001 for machine
Select the line item of tab and Delete the tab you need here.
Now create a new work center with the configured category as per above path then it will show only the tab pages you need.
Regards,
Narresh -
How to hide a tab in WBS?
Dear Gurus,
In my project Cproject is activated.
So, If i click WBS element, it is showing last Tab as cProjects. I want to hide the tab?
How to do it?
Regards
Sureshhowever path I have provided you that was for the custmised details screen.
The contents of the detail screens delivered by SAP are defined in the system and cannot be changed. However you can develop your own detail screens and include them in Project System Customizing for later use.
You can make the following settings:
Enter your own title for tab pages and put an icon on these pages.
Hide tab pages that you do not need
Determine which detail screens appear on which tab page and where
Change the layout according to the transaction (create, change, display)
If you do not want to redefine all the tab pages, copy the SAP standard layout or the Customizing settings and change these settings to suit your needs.
For the details please refer the following link.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/d1/ebb146e35f11d1a5d20000e82de7c3/frameset.htm
Regards
Nitin -
How to hide a tab in a jsp?
Hi all,
Kindly tell me how I can hide a tab in a jsp. Suppose the id of my tab is 'Tab123', what would be the syntax I need to use. And where should I put this syntax?You can use taglibs and EL to control the output flow in JSP. A standard taglib is JSTL. For conditional statements you can use JSTL's <c:choose> or <c:if> tags. Syntax is nothing more than obvious, here's some pseudocode:<c:if test="${display tab123}">
<div id="tab123"></div>
</c:if> -
How to hide a tab in a Tab Control by Property Node?
Hi,
I have a Tab Control in my Front Panel. So, using a array of LEDs, I would like to hide some tabs, probably using Property Node functions, but I can't find what option do it. Is it possible?Thanks Macro! I came to the forum to find a solution for this exact problem, it's nice to find it already laid out for me so clearly.
-Joe -
How to hide a tab, or why does have to be so complicated?
Hi
I have a tabNavigator, and I am trying to hide some of the tabs.
I have tried the obvioius
visible="false" //this did not work
includeInLayout="false" visible="false" //and this did not work and finally
var secondTab = tabNavigator.getChildAt(1);
secondTab.visible = false;
secondTab.width = 0; // this hides the contents of the tab, but the tab is still visible.
Why does it have to be so compliated, so unintuitive?deleting it is one way of hiding it
http://stackoverflow.com/questions/830977/whats-the-best-way-to-hide-a-tab-in-a-tabnavigat or
the above makes use of BindingUtils which is an Actionscript strategy for binding. so you bind, say, a boolean variable or function return to the visible property -
How to hide a tab from the existing tabstrip of CRMD_BUS2000111 transaction
I have to hide competitor tab from the tabstrip of CRMD_BUS2000111 transaction in CRM. I have tried shd0 but since this is not a dialog transaction we cannot create screen variant. After that I tried BUCO transaction.In BUCO I selected Sales Area data then competitors. But when I double click on compititors it is showing a message VCT control for screen configuration does not exist.
I do not have much idea about BUCO. Can any one help me solving my problem?Friends
With the following command you can register you .ocx ( Visual Buttons Control files ) in windows.
REGSVR32 C:\Progra~1\SAP\FrontEnd\SAPgui\vistransmitter.ocx
The above command will register said file in the registry and facilitate Visual Configurator Tool to run for Screen Sequence Modifications. With the above I also recommend Latest Patch (23), which is available with SAP to update on the windows frontend to avoid some other known frond end issues.
Before doing all above make sure your have 2 files existence in the C:\Progra~1\SAP\FrontEnd\SAPgui folder
Visu_se.exe
vistransmitter.ocx
Best Regards,
Jaswant Purba
[email protected] -
Hi Colleagues,
We have a requirement in which we have to dynamicaaly hide a tab on a screen that uses FPM. We were able to disable the tab but we did not find any option to hide/remove tab provided by FPM.
regards
ashishSteps to Hide/Remove BUDGET sub-view from PO Display-
1. Go to Object Navigator (t-code SE80) and enter Web Dynpro component FPM_OIF_COMPONENT. Right-click and then click on u201CCreate/Change Configurationu201D.
2. Enter configuration ID /SAPSRM/WDCC_FPM_OIF_PO_PURCH and then click on u201CChangeu201D.
3. Select Sub-view Budget.
4. To remove the sub-view, click on DELETE.
5. The sub-view will be removed.
Steps to Hide/Remove Sub-view contents and NOT the sub-view itself-
1. Enter the Configuration ID of the sub-view component.
2. Click on Web Dynpro Built-in tab.
3. Select all elements and set visibility as u201CInvisibleu201D.
4. Click SAVE.
5. Contents of BUDGET sub-view will be removed.
Steps to bring removed/deleted sub-view back on Portal-
1. Select Mainview HEADER and click on u201CAdd UIBBu201D. Enter the following in Attributes Subview: Budget.
Subbiew ID: Budget
Subview Name: Budget
Sequence Index: 4
2. Click on Attributes for the added UIBB and then enter the following values.
Component Name: /SAPSRM/WDC_UI_DO_BUDGET
View: IV_L_FPC_CA_DETAILS
Configuration Name: /SAPSRM/WDCC_UI_DO_BUDGET3
Regards,
Bijaya -
How to hide Summary Tab of Production Order for a Particular User
Hello Experts,
My customer doesn't want that all users are able to see the Summary Tab information in Production Order, as it contains Cost information, which is very confidential in their case.
Does anybody has idea how to achieve it ?
Best Regards,
Samir GandhiHi Samir...
This you have to do through SDK as there is no provision to hide it through any authorisation or any additional authorization.....
Regards,
Rahul -
ODI 11.1.1.7 / how to hide Topology Tab?
Customer is sharing the same Master repository between 2 development groups.
The would like to customize the access for each group's developer so
either 'HIDE' the topology tab all together
OR
ONLY data-stores associated with each group is visible to ONLY those developers.
is this possible?
Thanks
aliThanks Bhabani.
customer tried the 'profile' approach , however developers still can navigate to Topology tab, and/or see data server list, etc..
they don't want various teams to see the server setup for other groups etc..
in my opinion it is not possible to get rid of the TAB all together, like it was in 10g, where TOPOLOGY tab could be invoked
separately..
ali -
How to hide a tab/book in portal
Hello, I am building a website which requires a valid username and password to get in. Depending on the type of the user (client or admin) the users can view certain tabs or books in the portal (the admin will be able to view all available books). Is there anyway to hide a book/tab from the portal? I am using Weblogic 8.1 SP 3
Thank you
TLYou can use taglibs and EL to control the output flow in JSP. A standard taglib is JSTL. For conditional statements you can use JSTL's <c:choose> or <c:if> tags. Syntax is nothing more than obvious, here's some pseudocode:<c:if test="${display tab123}">
<div id="tab123"></div>
</c:if>
Maybe you are looking for
-
I have been using Elements 9 and my camera is the Nikon 7000. So far I have had no problems but now when I try to upload photos from my camera, the following mesage appears. "Elements 9 Organiser encountered a problem and needs to close. we are sorry
-
IPhone5 iOS 7 and 2010 fg xr6 Bluetooth audio streaming won't work
It connects fine and the phone call function work fine but I can't get it to work for audio streaming.... Any ideas?
-
Hi All, I ve tried my luck by posting this question some time back but had no response. Want to try once more. The scenario is with Third Part Order Processing. We have some third party orders. The vendor manufactires the goods and ships it directly
-
How do I open CR2 in CS6?
My MBP is running OS X 10.6.8 with installed registered version of Production Premium CS6. In previous forum threads (a couple months ago) there were similar issues w/ inability of opening CR2 in Bridge 5.0.2.4 and Camera Raw 7.0.0.308, and these peo
-
Trouble reconnecting to file server
Our OS X 10.3 computers connect to a file server through Appletalk. When the OSX computers lose connection to the server (usually because of a server restart, or some other maintenance issue), I cannot reconnect to the server shares without first res