How to hide albums names in Grid View

Some albums names are too long, like "How to Dismantle an Atomic Bomb". In small screens, like MacBook, is a mess to use Grid View because all long names comes with a cut and "…".
Can I just hide the albums names and artists names? Would be great if I could have just the covers without the characters soap.

Woohoo!
I'm a little drunk right now, it being saturday night, but giving this a cursory and immediate look-over,
it appears to me that this is exactly what I wanted!
And also, it seems kind of basic and stupid of me that I have missed it. It seems kind of foolish of me, not fully exploring the "view" menu.
Of course I explored it a bit, but I did not think that the column browser would contain what I needed / wanted.
I kind of wrongly assumed that all views were on the GUI, but now that I think about it, that makes no sense. The GUI never shows everything in any app.....
Thanks a million!
Until further notice, I think that's just what I was after, as well as the other answers contained in your previous posts.
Thanks again Steve!
I appreciate your answers. Really accurate.

Similar Messages

How to rearrange single photo in grid view

This seems like a silly question, but my library was imported and one photo out of 1000 shows up at the beginning in the grid view. I'd like to move it to the correct chronological location so it fits in with all the the others.
I can't figure out how to select a single photo and reinsert it into another location in the grid or filmstrip.
What is the easiest way to complete this operation? Seems to me I should be able to select it and simply drag the image...
The help file seems to show only global methods for rearranging order. I want to manually move a few images around.

Topic
How to rearrange single photo in grid view
dkindler - 03:33pm Jul 8, 2007 Pacific
This seems like a silly question, but my library was imported and one photo out of 1000 shows up at the beginning in the grid view. I'd like to move it to the correct chronological location so it fits in with all the the others.
I can't figure out how to select a single photo and reinsert it into another location in the grid or filmstrip.
What is the easiest way to complete this operation? Seems to me I should be able to select it and simply drag the image...
The help file seems to show only global methods for rearranging order. I want to manually move a few images around.
Reply To This Discussion | Back to Topic List | Bookmark | Subscribe
To start a NEW discussion click on the Back to Topic List link and select Add Topic.
If you are in an archive forum please go up to the main topic list (archives are read only).
Messages
17 messages. Displaying 14 through 17.
First Previous Next Last Show All Messages
DonRicklin - 9:53am Sep 12, 07 PST (#14 of 17)
Drag from center of image not frame, if you aren't doing so already.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.10 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/
Post Reply | Bookmark back to top
birgit ha - 9:57pm Sep 20, 07 PST (#15 of 17)
I use LR 1.2 on a mac. I can arrange/drag photos when they are in library in all photographs, quick collection.
As soon as I put them in the categories/keyword tags (in library) I can"t sort them anymore. Sort by user, drag them from center..... nothing works.
anybody can help??!!! pretty frustrating..
Post Reply | Bookmark back to top
DonRicklin - 4:16am Sep 21, 07 PST (#16 of 17)
User order only works in Folder or Collection (including Quick Collection) Views. And only the lowest (non Parent) level unless Menu/Library/Include Photos from Subitems is unchecked.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.10 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/
Post Reply | Bookmark back to top
birgit ha - 7:57pm Apr 8, 08 PST (#17 of 17)
Lightroom does not open from the dock or out of applications (directly). I only have the lightroom bar on the top of the screen. It allows me manually to select a catalog that I want to open but then I get the message "an error occured when attempting to change modules and a blank lightroom opens.
Sometimes I am able to create a new catalog but as soon as I close LR and want to open it again the next day or an hour later everything is gone/cannot open LR again.
I tried to reinstall LR. No change.
I am using Lightroom 1.3.1 on a Mac Book Pro 10.4.11
Hope somebody can help!!!

How to hide albums or photos in IOS 8 ?!

How to hide albums or photos in IOS 8 ?!

For photos go to the photo you want to hide, tap and hold the photo and you will see the option to hide it. There is not an option to hide an entire photo album.

How to hide ribbon from all item view for particular user group

hi friends
how to hide ribbon from all item view of particular list for specific user group.
using OOB functionality or javascript.

Hello,
Use this codeplex tool to hide ribbon to user group:
http://spribbonvisibility.codeplex.com/
If you don't want to use above tool then you have to add SPSecuritytrimming in "Rajiv Kumar" code for filtering based on user group permission.
http://www.topsharepoint.com/hide-the-ribbon-from-anonymous-users
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Slow-to-load album covers in Grid View

I've encountered a problem for a while that I thought I might bring up...
Whenever I start iTunes, it defaults to Grid View, the only view I use when browsing iTunes. Now, I'm unsure if iTunes caches album art or not, but every time I boot it up and scroll down, all of my albums appear artless for half a second before slowly applying the album art. This makes scrolling down incredibly slow and clunky.
Once I fully scroll down, I can scroll smoothly all I want, but if I close iTunes, everything is clunky again. Any tips? Does iTunes not cache album art?

iTunes will need to load all of your artwork when using cover flow and grid view. There IS a cache folder in the Album Artwork folder of iTunes, but i don't know how effective that is.
However, if you are running a version earlier than 9.2, iTunes 9.2 runs cover flow and grid view A LOT faster than previous versions, since what it does is create thumbnail versions of your images for those views only, making those views operate a heck of a lot quicker.
I know 9.2 still has some bugs and some people may advise against it, but if you really want to see a boost of performance with grid view I'd recommend updating if you haven't already. Besides, for any bugs there, Apple will probably release fixes for them shortly.

How to hide the field from the view in the webdynpro application?

Hi Gurus,
I got a requirement where in which ,default layout has the field name Time.......To......... which is (2 input box ) and one lable assigned to the container.........
Now my requirement is to hide this field from the layout for all cases of leave......(all types of leave)....
I got a few inputs from forum that we can achieve this by implementing the following steps..........
Create In context => Value attribute => Say Visibility
Go to its properties
Select com.sap.ide.webdynpro.uielementdefinitions.Visibility
In View Layout
Select UI Element Set Visible property to this context variable Visibility.
In wdDoModifyView() You can set this property to false
wdContext.currentContextElement().setVisibility(false);
Can you people tell me where to create the value attribute........
In the view context or in the component context...........
and field that am talking about is assign to the container you want me to assign this context variable property to all ......Like to input box ,label and the container..........
Please calrify this ASAP...........
Thanks in Advance,
Dharani

Hi Manoj......
Hi Murutuza,
As per your guidelines I have created the value attribute in View context (which has the field..... which needs to be hide)inside the value node say FieldVisibility.......and attribute name OldTimeDuration......and I set this value with uidefeneitions Visibility .......
and I bind this vaule with the field property visible(Time.......To..........)which I need to hide...........
Now in the view implementation tab ..........I have coded in the doinit method(since my requirement to hide the field from the layout in all cases).........
wdContext.currentFieldVisibilityElement().setOldTimeDuration(WDVisibility.NONE);
But if I deploy the application and see still am getting the same field dispalying in the screen.........
I even tried putting this code in wdmodifyview method.........same results........
Kindly tell me how to hide the field permenantly from the screen............(without any conditions.)
Thanks in Advance,
Dharani

How to hide exit button on overview view of adress iview.

Hello Gurus,
Can anybody suggest me how to hide the exit button on overview page of address iview?
Thanks,
Sha

Hi
1) If you want the exit button to be hided u can use the following code in doModify as we know this doModify will be called each time the action is performed so when we use this code exit button will be hided all the time.
Button btn_ui= (button) view.getElement("Button_ID");
btn_ui.setVisible(WDVisibility.NONE);
2) if you want to hide only on specific time then better to use the value attribute of type com.sap.ide.webdynpro.uielementdefinitions.Visibility then bind this to exit button's property--> visibility and in your code wherever required set the visibility.
Ex: value attribute name : va_Exit_Visible
type : com.sap.ide.webdynpro.uielementdefinitions.Visibility
wdContext.currentContextElement().setVa_Exit_Visible(WDVisibility.NONE);
Regards
Prasad.

How to hide full name when publishing photos to icloud's public website?

When allowing iPhoto to publish photos to iCloud (Public Website, allow anyone to view this photo stream at:..." my full Name (xxx by xxx) is always displayed when opening the link.
Does anyone know how to hide or change the name displayed?

I tried changing my name (Apple ID). It had no effect on the Aperture photo stream website page (and yes, I tried it with a new photo stream).
I still think your name should not be included by default with public website, as well as ability to prevent pictures from Copy/Save.

How to get column value in grid View

Hello My first Language is German so bear with my English
FIRST vIEW THE SCREEN SHOT PLEASE
I am new to asp.net i am making small application to generate reports in which user give criteria just liek we do in sql server i have two grid view in accordion section then there is button so Both GridView has headers that Name
, Output and Filter
Name shows the Column of database fields, output column has check box if user check box it will only display those columns and filter is text box in which we filter our results
basically i am just trying to do this like sql server in which user check columns to display and also provide filter criteria and then sql query modified according to the grid values.
i have attached the screen shot of grid view kindly view it please You will have idea what i am tyring to say
now i want some help in filter criteria
suppose user check ref Code, School,Program, Name in the grid view and press show button
it generates query
select RefCode,School,Program,Name from Applicant.
now i want to apply where clause if user write something in filter text box which i can not do kindly help me out and view the screen shot my desire outcome is if user check column and also write some value in RefCode filter textbox let suppose '0565-01'
and in School Text user write SBE
it should generate sql
select RefCode,School,Program,Name from Applicant where (RefCode='0565-01')and (School='SBE');
my code for show button which generate simple select statement without where clause is below.
protected void Button2_Click(object sender, EventArgs e)
String output = "";
String filter = "";
foreach (GridViewRow row in gvExperience.Rows)
CheckBox cb = (CheckBox)row.FindControl("CheckBox1");
if (cb.Checked == true)
output += row.Cells[0].Text.ToString() + ','; // get the Name of columns and concate in output variable }
output = output.Remove(output.LastIndexOf(","), 1)
string sql = "select " + output + " from Applicant"; // display the query
bindoutput(sql); // pass this query and bind the new gridview which contain generated sql
Azeem

Hi Azeem,
>>I am new to asp.net
Please ask on this forum instead:
http://forums.asp.net/24.aspx/1?Web+Forms+Data+Controls
ASP.NET issue is not related to WinForm forum.
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to refractor the name of a View Object ?

I dont see how to change the name of view. It was refractor in the prior version.

The same operation is used in 11g to rename a VO and works as expected in the most current internal builds.
--Ric

How to reveal file type in grid view?

In grid view, file number appears at the top of each thumbnail image. But it does not show whether they are jpg or NEF type.
How can I let file type appears together at the end of file number in grid view? There is a way to see file type but if appears in gird view it would be more convenient.
I use LR. 5.4.

In Library mode, do View > View Options. Then under Compact Cell Extras and Expanded Cell Extras, you can choose what is displayed next to the thumbnail:

How to display Album Name / Artwork if only one album is in Ipod

I have a 160GB Ipod, and after transferring the favorite CD's from my collection the thing is now full. Because there's so much on the thing I have many Artists on my Ipod with only one of their albums.
Anyway, if you only have ONE album from a given artist when you click on that artist's name under the "artists" category it will not display the album name to click on (and thus not display the artwork,) it just goes right into displaying the tracks from that artist's album. If you have two albums this problem obviously doesn't exist and it displays both album names for you to click on.
Is there any way for me to have it display the album name and album picture under an artist's name if I only have one of their albums? For example, if I had only Axis Bold as Love by Hendrix and no other album I want to be able to click on his name under artists, see "Axis Bold As Love" and subsequently its album art to lcik on RATHER than clicking on his name and seeing the track listing right away for Axis Bold As Love (that's how it is now.)
I don't like to use CoverFlow, I prefer to scroll by Artist name.
Thanks.

For example, if I had only Axis Bold as Love by Hendrix and no other album I want to be able to click on his name under artists, see "Axis Bold As Love" and subsequently its album art to lcik on RATHER than clicking on his name and seeing the track listing right away for Axis Bold As Love
And?
Click on a song to play the album. Why do you want to click on the album cover?

Dark borders around album art in grid view

Hi everybody,
since last week my iTunes is displaying strange dark borders around album cover art and iPhone apps icons in grid view (see http://j.imagehost.org/0154/1_21.jpg). I am using the dark background theme. I already tried restarting iTunes and the computer several times and deleting the iTune album artwork cache.
Does anybody have an idea what else I could try to remove these ugly borders?
Thanks in advance
Jens

I have the same issue here.
If i change my display profile in the system preferences to the default, they disappear.
But that can’t be the solution.
Has anybody a clue?

How to hide full name in the "to" box of email...

Hi all,
I have several "private" people on my mailing lists who do NOT want their full name showing up in the "to field" when I send them email. I have tried everything short of simply deleting their last names from my address book and nothing has worked. Is there a way to specify that Mail MUST use their nickname instead of their full name when I send them email? Anybody know?
K

A different solution would be to BCC them; their names and addresses won't be available to anyone but you. You can even BCC to the entire mailing list - in some cases you'll have to provide a single To address, such as your own, to get the mail to send. It effectively hides the names and addresses of the people in your mailing list.
(Well, this works prior to Tiger and I doubt they've taken the ability away. Good luck.)
srb

Bug? scroll bar hides behind filmstrip in Grid view

In Library Grid view, when scrolling to the bottom of the grid, the scroll bar slider gets hidden behind the film strip at the bottom of the window.
OS: WinXP SP2, 4GB RAM

Okay, I will answer my own question in case anyone else sees the problem.
When I am viewing my large catalog with only three thumbnails across in LR, I lose the little button to slide up and down. When I change Grid View to show four or more thumbnails, the button reappears. I'd suggest this is a bug needing fixing.

How to hide albums names in Grid View

Similar Messages

Maybe you are looking for