How to hide fields of personal data in Personal information

Hi Guru's,
W.r.t subject, please guide me to solve my issue.
System Configuration : SAP ERP 6.0, EHP 6,NWBC
We are Implementing ESS / MSS through NWBC and I have a requirement of hiding fields in Personal Information --> Personal Profile --> Personal Data
Here I have a requirement of Hiding fields like 2nd Nationality,3rd Nationality, Birth Country etc... Please find the attached Screen for the same and requesting you to help me in achieving this requirement.
Thanks in Advance.
Rajeswara

Hi Shankar,
We have 3 clients in DEV system,
Configuration and Testing clients are different systems.
Portal connected to Testing client, we are using NWBC for Portal services. So here Portal link is not required as like EP.
It would be highly appreciable, if u can help me Step by step process to achive my requirement (Hiding Mandatory fields of Personal data IT in Personal information services).
Thanks InAdvance,
Rajeswara.

Similar Messages

How to hide fields in UIX form

Hi
I need to update the table with last_updated_by and last_updated_date every time if any change to the record. But I do not want to show these 2 fields on the screen.
Could you help me how to hide fields in UIX form/any procedure to insert the data to database with out placing them in the screen .
Thanks in advance.
NRK

Now that you mention it ... the rendered flag will stop the field from being rendered. So it's not even in the page. Stupid me.
Have a look at formValue. These are rendered, but invisible fields in a form. That should do it (hopefully).
In prepareForDML() you could simply call the setter of your date attribute that stores the date of the last update. There you pass the current date, or you could fetch the sysdate from the database and pass that. If you go that way, then the EntityImpl could make these adjustments automatically when inserting or updating and you wouldn't even need these fields/bindings in your UIX page.
Just check what the operation is, and if it's an update or insert then call the setters of the attributes you want to update. Then call super.prepareForDML(). Something like that.
It all would happen in the middle-tier, client not involved.
So formValue should work, and the prepareForDML() stuff should also work. Don't know which way you want to go.
Sascha

How to hide fields in Table maintenace screen

I have created a view with table maintenance generator. I would like to hide some fields. With event I am able to fill in those fields but I want to hide those from screen.

HI,
This is reff with ur below post, I have been stuck with same problem,
I got your code, how its functioning, but didn't get get where i have to write it.
plz tell me in brief.
Thanks in Advance.
Regards
Vivek
Re: How to hide fields in Table maintenace screen
Posted: Feb 6, 2009 11:42 AM   in response to: Aarti Ramdasi in response to: Aarti Ramdasi
Click to report abuse...             Click to reply to this thread      Reply
Hi,
You can hide the fields like this..
For example
select-options:
s_carrid for spfli-carrid modif id gr1,
s_connid for spfli-connid modif id gr1,
s_cityto for spfli-cityto modif id gr2.
I am going to hide last fied..To do this
at selction-screen output.
if s_carrid is initial or s_connid is initial.
loop at screen.
if screen-group1 CS 'GR2'.
screen-active = 0.
modify screen.
endif.
endloop.
endif.
whenever u click on any one of the field i.e. carrid or connid the third field will displayed.Otherwies the last field cityto is not visible initially
Regards
Kiran

How to Hide/show the columns data while doing Drill down or drill up

Hi ,
How to Hide/show the columns data while doing Drill down or drill up in webi report .
Does it possible BO 3.1 version ?
Please suggest me on this.
Thanks & Regards
Venkat

While that is not there yet, you can make use of the show when empty yes/no in combination with alerters.
So I have an alerter applied to every cell of the table.
When a condition is true (say I drilled down) I just put = "" in every cell, emptying the table,
because its now empty and doesn't need to show, it wont.
For the detail table I use the opposite, so when you drilled down it becomes visible...
Hope this helps all that do not have 40 yet
Good luck,
Marianne

Modify screen in VA41 : How to hide field in userexit_field_modification

Hello,
How to hide field at item level only (User should not be able to edit this field) in userexit_field_modification, instead of hiding the complete column.
If I use
FORM USEREXIT_FIELD_MODIFICATION.
IF screen-name = 'RV45A-MABNR'. " Material
SCREEN-required = 0.
ENDIF.
ENDFORM
the complete material column will be greyed out. I want to grey out only for some items.
Thanks,
AP

Hi AP,
You havent given MODIFY SCREEN after screen-required = 0.
Please try it abd check.
FORM USEREXIT_FIELD_MODIFICATION.
IF screen-name = 'RV45A-MABNR'. " Material
SCREEN-required = 0.
MODIFY SCREEN.
ENDIF.
ENDFORM
Regards,
Pawan

How Many NUMBER Fields Can SINGLE DATA BASE TABLE CONTAIN

How Many NUMBER Fields Can SINGLE DATA BASE TABLE CONTAIN

Hi
One Database table contain 249 Fields.
Rewards Points if useful..
Regards
Nikunj Shah
Edited by: Nikunj Shah on May 13, 2008 1:08 PM

How to hide field in profit center masted data?

Hi,
I would like to know how to hide the field segment in profit
center master data
Alternatively I would like to know which user exit used
to prevent the feeding of the field segment in profit center
master data.
Thanks in advance,
Osvaldo
Edited by: Osvaldo Cavagnero on Mar 4, 2010 1:43 PM

Dear,
Try de-activating the indicator through
SPRO>Financial Accounting(new)>GL Accounting (New)>Preparation for productive start>Migration of existing SAP Data>Additional Activities>Make settings for segment and segment derivation.
Maintain Segment.
Hopefully it has to work.
Regards,
Syed Hussain.

How to hide fields in Web UI on basis of some data conditions

Hi,
Is there any way we can hide the fields on some data conditions, i know we can disable the field in get_i method but just wondering if we can hide it completely.
Regards,
Kamesh

As far as I know there is no way to hide a field via the provided methods (Ex: GET_xxx...). The only way I reckon you can achieve this is to create a separate UI config for the fields you want to hide. I assume your scenario is simple else it would not make sense to create a ton of UI configs or would it?

How to hide fields in product master data

Hi gurus,
could you please tell if it's possible to hide fields in Product maintenance (tr. COMMPR01).
It's necessary to hide some fields in a standard Set type.
Thanks in advance, Sunny.

Hi, TooCan and K.narsimha rao,
I've tried to use transaction variant. It really helps.
Thank you!
It was better for me to find some customizing in SPRO but as I understand there is no such.
Reward you
Best regards, Sunny.

HOW TO HIDE FIELDS IN A CUSTOM TABLE

Hi all,
I've a requirement where there's a maintainence view attached to a custom created table. Whenever I add new entries via View, on saving the record, 2 of its fields only should appear.
For example, if my table looks like this,
SAP ID OBJECT ID FROM DATE TO DATE
Once i add a new record, when i press save, only 2 of fields say, SAP id and Object Id should appear instead of all the fields.
Can someone throw light on this if you're aware? Any input in this regard will be highly valuable to me and appreciated. If someone is unable to intrepret this question, do let me know, I'll detail it again.
Thanks in Advance,
Vaishnavi Varadarajan

hi Vaishu,
Hide parameter / select option in selection screen
We can Hide parameter / select option in selection screen dynamically by manipulating screen object.
SCREEN is like an internal table with a header line. However, you do not have to declare it in your program. Go to debugging mode and then view structure of screen.
You can modify SCREEN in your ABAP program during the PBO event of a screen. Its contents override the static attributes of the screen fields for a single screen call. The only statements that you can use with SCREEN are:
LOOP AT SCREEN.
MODIFY SCREEN.
ENDLOOP.
We can hide parameter by set screen-active to 0.
Here is example of how to hide parameter in selection screen. Write it, and change click on radiobutton to hide parameter.
REPORT ZAALGAL0006.
DATA: d_ucomm LIKE sy-ucomm.
PARAMETERS: p_grpa1(10) MODIF ID A,
p_grpa2(5) MODIF ID A,
p_grpb1(2) MODIF ID B.
PARAMETERS: p_actA RADIOBUTTON GROUP rad1 USER-COMMAND ACT DEFAULT 'X',
p_actB RADIOBUTTON GROUP rad1.
AT SELECTION-SCREEN.
d_ucomm = sy-ucomm.
AT SELECTION-SCREEN OUTPUT.
LOOP AT screen.
IF p_actA = 'X'.
IF screen-group1 = 'B'.
screen-active = 0.
ENDIF.
ELSEIF p_actB = 'X'.
IF screen-group1 = 'A'.
screen-active = 0.
ENDIF.
ENDIF.
MODIFY screen.
ENDLOOP.
START-OF-SELECTION.......
pls refer the below sites for reference. they may help you
http://www.blogtoplist.com/software/blogdetails-14026.html
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html
https:/.../servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/905e3d36-0301-0010-30ac-b55865545635
thanks
sagar
reward me points if usefull

How to hide fields in Infotype 16 for Molga 28

Hi Guys,
I need to hide some fields for IT0016 for Molga 28. Earlier we have assigned different screen for this molga .But now we have assigned the standard screen to IT0016 i.e. View-3211. But when i go to node Change Screen Modifications, i m unable to find MP321100. I have checked through PA30 for chinese employee the Program is MP321100 and screen is 2000.
COuld you guide how to hide some of the fields for Chinese Molga 28 in IT0016.
Regards,
Navneet

Hi Harish,
I havent got the chance to check with BASIS yet....they are lil busy .....meanwhile i have created an entry in t588m with Module pool mp321100 and feature p0016. As u told i have created entry with Molga 28 and return key 28 in P0016 feature.
Could you confirm that i need to Create mP321100 or i could have done it via mp001600 as told by other guy.
And now if i go the fields are hidden except for two fields which strangely are coming "ER Notice Period" and
"EE Notice Period". I have hidden all fields still these two fields are cming any idea why?
Regards,
Navneet

How to hide fields in table view

Hi,
I'm populating the contents of an internal table in a table view. I want to know how to hide few fields in table view. I'm working on classical BSPs.. no MVC and I have not used iterator.
Thank you
Sreesanth.

just to hide certain fields (columns) you dont need iterator. you could use columnDefinition attribute of htmlb:tableView tag.
to do this declare two page attributes as below
col_control_tab     TYPE     TABLEVIEWCONTROLTAB
col_wa     TYPE     TABLEVIEWCONTROL
now in the oninitialization event. fill col_control_tab with the required column details.
suppose the itab has columns 1 to 10 and you want to display only column 1 and 8 then the coding would be.
clear col_wa .
move: '1' to col_wa-columnname , " field name of column1 in itab
'This is the title of column1' to col_wa-title ,
'LEFT' to col_wa-horizontalalignment .
append col_wa to col_control_tab .
clear col_wa .
move: '8' to col_wa-columnname , " field name of column8 in itab
'This is the title of column8' to col_wa-title ,
'LEFT' to col_wa-horizontalalignment .
append col_wa to col_control_tab .
the finally
<htmlb:tableView id                  = "tv1"
                       design              = "ALTERNATING"
                       selectionMode       = "MULTISELECT"
                       onRowSelection      = "MYROWSELECTION"
                       table               = "<%= flights %>"
                     columnDefinitions   = "<%= col_control_tab %>"
Regards
Raja

How to add Fields in Additional Data B in VA01/VA02.PLease help me out.

HI All,
My requirement to add a Custom Screen in Va01/VA02 .Kindly suggest if any screen exists are there.
How to Add extra fields in Additional Data B in header of VA01/VA02.is access key is neccessary for that.
Thanks in Advance.

Hi
Check the link
http://techbays.com/2008/04/17/implicit-enhancement-in-sap-ecc-60/
There is a BADI BADI_SD_V46H0001 and Method EXIT_SAPLV46H_003.
You should be able to it without access keys.Consult your SD Functional Guy also
Regards
Sanil Bhandari

How to hide field dynamically in a report while using JRC

Post Author: prateeti
CA Forum: JAVA
How can I hide fields in a report dynamically?Say my report now contains 3 fields(columns). Some users want to see the 1st and 3rd column and the 3rd column must be adjusted accordingly so that it appears where the2nd column previously was.Is there any way of doing such thing using API's from JRC.I am not using RAS.
Thanks.

Post Author: something_stupid
CA Forum: JAVA
Hi,
you could to this while designing your report in CrystalReports. Pass the user's choice as parameters to your report on runtime. This parameter is evaluated and changes visibility and position of columns conditionally. Actually haven't done this with visibilty and position but with strings to display conditionally.
good luck!

How to Hide fields at Costing2 in Material Master

Dear Experts,
One of my requirement is, i want to hide 3 fields in Material Master costing2 tab. The fields are Planned Price1, Planned Price2, Planned Price3.
Can any one guide me how to hide those fields through SPRO. Otherwise how to approch this requirement?
Thanx and Regards,
Mohana

Hi,
My requirement is, Customer dont want Planned price1, planned price2 and planned price3 in costing tab2 in Material Master. They required this 3 fields with 7 more fields in one more tab.
So our Tech consultants are created one more view next to costing tab2. They made the remaining 7 fields into 'Z' table and these 3 fields i need to move from Costing tab2 to costing tab3.
Kindly help how we need to achive this.
Mohana

How to hide fields of personal data in Personal information

Similar Messages

Maybe you are looking for