How to hide/invisible a column in table maintanence generator????

Hi,
I have a table maintanence genarator of 5 fileds in which there are 2 primary fields. My requirement is to HIDE/INVISIBLE the first column (which is one of the primary key- SPRAS).
How can i do this without coding???
Thanks in advance.

ya , i was in change mode...still it is inactive...
Even i tried the same by code but it seems inactive but not getting invisible in the screen.....
MODULE coulmn_modify OUTPUT.
LOOP AT SCREEN.
    CASE screen-name.
      WHEN '*ZCCBTACT-SPRAS'.
        screen-input = 0.
        screen-output = 0.
        screen-active = 0.
        screen-invisible = 1.
        MODIFY SCREEN.
      WHEN 'ZCCBTACT-SPRAS'.
        screen-input = 0.
        screen-output = 0.
        screen-active = 0.
        screen-invisible = 1.
        MODIFY SCREEN.
    ENDCASE.
ENDLOOP.
ENDMODULE.                 " coulmn_modify OUTPUT

Similar Messages

How to hide the data in particular table in oracle 10g

How to hide the data in particular table in oracle 10g
i want steps

If its on Report u can always hide the column - Keyfigure or Selection - Display - Hide......y do u want to have it on the report if it is to be hided in the first place?

How to Hide/show the columns data while doing Drill down or drill up

Hi ,
How to Hide/show the columns data while doing Drill down or drill up in webi report .
Does it possible BO 3.1 version ?
Please suggest me on this.
Thanks & Regards
Venkat

While that is not there yet, you can make use of the show when empty yes/no in combination with alerters.
So I have an alerter applied to every cell of the table.
When a condition is true (say I drilled down) I just put = "" in every cell, emptying the table,
because its now empty and doesn't need to show, it wont.
For the detail table I use the opposite, so when you drilled down it becomes visible...
Hope this helps all that do not have 40 yet
Good luck,
Marianne

....how to create table maintanence generator for a z table and how to use

Hi...
3....how to create table maintanence generator for a z table and how to use that for transfering a selected records to one server to another server.
thanks and regards,
k.swaminath reddy

Hi,
Table maintanance Generator is used to manually
input values using transaction sm30.The Table Maintenance Generator is used to create table maintenance program to add, modify or delete records in the database table. This can be accessed using transaction SE54 or in SE11 using the menu Utilities->Table Maintenance Generator

Follow below steps
go to se11 check table maintanance check box under
attributes tab
utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
select maintaience type as single step.
maintainence screen as system generated numbers
this dialog box appears when you click on create
button
save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
please check the link for getting information about table maintenance generator !
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
Regards,
Priyanka.

Regarding Table maintanence generator

Hi,
I have a requirement were in i need to upload data in to this customisizing table using table maintanenece gen....My requirement is to hide the primary key which is of no use to end user instead when he enters data into this the i should generate the primary key by means of some FM which wud be unique for each record of the entry created in the table.....but the user should not see the first key which is primary key here in my case should be hidden in the table maintanence generator......Please response quickly its urgent...............
Thanking you in Advance......

here is the code for that
REPORT ZTAB_MAINT
 NO STANDARD PAGE HEADING
 MESSAGE-ID ZZ.
* T Y P E D E C L A R A T I O N S
*--Types declaration for selection to be passed as parameter into
*--VIEW_MAINTENANCE_CALL FM
TYPES: BEGIN OF TP_RANGETAB.
 INCLUDE STRUCTURE VIMSELLIST.
TYPES: END OF TP_RANGETAB.
* D A T A D E C L A R A T I O N S
DATA: V_MATNR TYPE MATNR, " Material Number
 V_WERKS TYPE WERKS_D, " Plant
 V_KONOB TYPE KONOB, " Product allocation object
 V_ZCPLT(40) TYPE C. " Message
* I N T E R N A L T A B L E D E C L A R A T I O N S
* Internal table to subroutine code
*Internal table used as selection for VIEW_MAINTENANCE_CALL FM
DATA: IT_RANGETAB TYPE STANDARD TABLE OF TP_RANGETAB WITH HEADER LINE.
*--Internal table used for getting the tablefields
DATA: BEGIN OF IT_HEADER OCCURS 1.
 INCLUDE STRUCTURE VIMDESC.
DATA: END OF IT_HEADER.
*--Name Tabel
DATA: BEGIN OF IT_NAMTAB OCCURS 50.
 INCLUDE STRUCTURE VIMNAMTAB.
DATA: END OF IT_NAMTAB.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_MATNR OCCURS 0,
 MATNR TYPE MATNR,
 END OF IT_MATNR.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_WERKS OCCURS 0,
 WERKS TYPE WERKS,
 END OF IT_WERKS.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_KONOB OCCURS 0,
 KONOB TYPE KONOB,
 END OF IT_KONOB.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_ZCPLT OCCURS 0,
 ZCPLT(40) TYPE C,
 END OF IT_ZCPLT.
* I N P U T S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK SELSCR WITH FRAME TITLE TEXT-001.
RANGES: R_MATNR FOR V_MATNR.
RANGES: R_WERKS FOR V_WERKS.
RANGES: R_KONOB FOR V_KONOB.
RANGES: R_ZCPLT FOR V_ZCPLT.
* Select Options
SELECT-OPTIONS: S_MATNR FOR V_MATNR NO-EXTENSION, " Material
 S_WERKS FOR V_WERKS NO-EXTENSION, " Plant
 S_KONOB FOR V_KONOB NO-EXTENSION,
 " Product allocation object
 S_ZCPLT FOR V_ZCPLT NO-EXTENSION. " Plant
SELECTION-SCREEN END OF BLOCK SELSCR.
* A T S E L E C T I O N S C R E E N
AT SELECTION-SCREEN.
* Validate user inputs
PERFORM FRM_VALIDATIONS.
* S T A R T O F S E L E C T I O N
START-OF-SELECTION.
* Fetch Data from Data Base
PERFORM FRM_GET_DATA.
* S U B R O U T I N E S
*& Form frm_get_data
* Call the function module VIEW_MAINTENNACE_CALL to get data
* based on selection criteria
FORM FRM_GET_DATA .
CALL FUNCTION 'VIEW_GET_DDIC_INFO'
 EXPORTING
 VIEWNAME = 'ZTAB'
 TABLES
 X_HEADER = IT_HEADER
 X_NAMTAB = IT_NAMTAB
 SELLIST = IT_RANGETAB
 EXCEPTIONS
 NO_TVDIR_ENTRY = 1
 TABLE_NOT_FOUND = 2.
IF SY-SUBRC <> 0.
 MESSAGE E002 WITH 'Error in ZTAB table'(005).
ENDIF.
CLEAR: IT_RANGETAB,
 IT_RANGETAB[].
LOOP AT IT_NAMTAB.
 CASE IT_NAMTAB-VIEWFIELD.
 WHEN 'MATNR'.
 CLEAR IT_RANGETAB.
 IT_RANGETAB-VIEWFIELD = 'MATNR'.
 IT_RANGETAB-TABIX = SY-TABIX.
 IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
 LOOP AT S_MATNR.
 CASE S_MATNR-OPTION.
 WHEN 'EQ'.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'EQ'.
 IT_RANGETAB-VALUE = S_MATNR-LOW.
 APPEND IT_RANGETAB.
 WHEN 'BT'.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'GE'.
 IT_RANGETAB-VALUE = S_MATNR-LOW.
 APPEND IT_RANGETAB.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'LE'.
 IT_RANGETAB-VALUE = S_MATNR-HIGH.
 APPEND IT_RANGETAB.
 WHEN 'NB'.
 CLEAR: R_MATNR,
 R_MATNR[].
 R_MATNR-SIGN = 'I'.
 R_MATNR-OPTION = 'BT'.
 R_MATNR-LOW = S_MATNR-LOW.
 R_MATNR-HIGH = S_MATNR-HIGH.
 APPEND R_MATNR.
 SELECT MATNR
 INTO TABLE IT_MATNR
 FROM ZTAB
 WHERE MATNR IN R_MATNR.
 DELETE ADJACENT DUPLICATES FROM IT_MATNR COMPARING MATNR
 LOOP AT IT_MATNR.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'NE'.
 IT_RANGETAB-VALUE = IT_MATNR-MATNR.
 APPEND IT_RANGETAB.
 ENDLOOP.
 WHEN 'NE'.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'NE'.
 IT_RANGETAB-VALUE = S_MATNR-LOW.
 APPEND IT_RANGETAB.
 WHEN OTHERS.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = S_MATNR-OPTION.
 IT_RANGETAB-VALUE = S_MATNR-LOW.
 APPEND IT_RANGETAB.
 ENDCASE.
 ENDLOOP.
 WHEN 'WERKS'.
 CLEAR IT_RANGETAB.
 IT_RANGETAB-VIEWFIELD = 'WERKS'.
 IT_RANGETAB-TABIX = SY-TABIX.
 IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
 LOOP AT S_WERKS.
 CASE S_WERKS-OPTION.
 WHEN 'EQ'.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'EQ'.
 IT_RANGETAB-VALUE = S_WERKS-LOW.
 APPEND IT_RANGETAB.
 WHEN 'BT'.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'GE'.
 IT_RANGETAB-VALUE = S_WERKS-LOW.
 APPEND IT_RANGETAB.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'LE'.
 IT_RANGETAB-VALUE = S_WERKS-HIGH.
 APPEND IT_RANGETAB.
 WHEN 'NB'.
 CLEAR: R_WERKS,
 R_WERKS[].
 R_WERKS-SIGN = 'I'.
 R_WERKS-OPTION = 'BT'.
 R_WERKS-LOW = S_WERKS-LOW.
 R_WERKS-HIGH = S_WERKS-HIGH.
 APPEND R_WERKS.
 SELECT WERKS
 INTO TABLE IT_WERKS
 FROM MARC
 WHERE WERKS IN R_WERKS.
 DELETE ADJACENT DUPLICATES FROM IT_WERKS COMPARING WERKS
 LOOP AT IT_WERKS.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'NE'.
 IT_RANGETAB-VALUE = IT_WERKS-WERKS.
 APPEND IT_RANGETAB.
 ENDLOOP.
 WHEN 'NE'.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'NE'.
 IT_RANGETAB-VALUE = S_WERKS-LOW.
 APPEND IT_RANGETAB.
 WHEN OTHERS.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = S_WERKS-OPTION.
 IT_RANGETAB-VALUE = S_WERKS-LOW.
 APPEND IT_RANGETAB.
 ENDCASE.
 ENDLOOP.
 WHEN 'KONOB'.
 CLEAR IT_RANGETAB.
 IT_RANGETAB-VIEWFIELD = 'KONOB'.
 IT_RANGETAB-TABIX = SY-TABIX.
 IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
 LOOP AT S_KONOB.
 CASE S_KONOB-OPTION.
 WHEN 'EQ'.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'EQ'.
 IT_RANGETAB-VALUE = S_KONOB-LOW.
 APPEND IT_RANGETAB.
 WHEN 'BT'.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'GE'.
 IT_RANGETAB-VALUE = S_KONOB-LOW.
 APPEND IT_RANGETAB.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'LE'.
 IT_RANGETAB-VALUE = S_KONOB-HIGH.
 APPEND IT_RANGETAB.
 WHEN 'NB'.
 CLEAR: R_KONOB,
 R_KONOB[].
 R_KONOB-SIGN = 'I'.
 R_KONOB-OPTION = 'BT'.
 R_KONOB-LOW = S_KONOB-LOW.
 R_KONOB-HIGH = S_KONOB-HIGH.
 APPEND R_KONOB.
 SELECT KONOB
 INTO TABLE IT_KONOB
 FROM T190
 WHERE KONOB IN R_KONOB.
 DELETE ADJACENT DUPLICATES FROM IT_KONOB COMPARING KONOB
 LOOP AT IT_KONOB.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'NE'.
 IT_RANGETAB-VALUE = IT_KONOB-KONOB.
 APPEND IT_RANGETAB.
 ENDLOOP.
 WHEN 'NE'.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'NE'.
 IT_RANGETAB-VALUE = S_KONOB-LOW.
 APPEND IT_RANGETAB.
 WHEN OTHERS.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = S_KONOB-OPTION.
 IT_RANGETAB-VALUE = S_KONOB-LOW.
 APPEND IT_RANGETAB.
 ENDCASE.
 ENDLOOP.
 WHEN 'ZCPLT'.
 CLEAR IT_RANGETAB.
 IT_RANGETAB-VIEWFIELD = 'ZCPLT'.
 IT_RANGETAB-TABIX = SY-TABIX.
 IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
 LOOP AT S_ZCPLT.
 CASE S_ZCPLT-OPTION.
 WHEN 'EQ'.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'EQ'.
 IT_RANGETAB-VALUE = S_ZCPLT-LOW.
 APPEND IT_RANGETAB.
 WHEN 'BT'.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'GE'.
 IT_RANGETAB-VALUE = S_ZCPLT-LOW.
 APPEND IT_RANGETAB.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'LE'.
 IT_RANGETAB-VALUE = S_ZCPLT-HIGH.
 APPEND IT_RANGETAB.
 WHEN 'NB'.
 CLEAR: R_ZCPLT,
 R_ZCPLT[].
 R_ZCPLT-SIGN = 'I'.
 R_ZCPLT-OPTION = 'BT'.
 R_ZCPLT-LOW = S_ZCPLT-LOW.
 R_ZCPLT-HIGH = S_ZCPLT-HIGH.
 APPEND R_ZCPLT.
 SELECT ZCPLT
 INTO TABLE IT_ZCPLT
 FROM ZTAB
 WHERE ZCPLT IN R_ZCPLT.
 DELETE ADJACENT DUPLICATES FROM IT_ZCPLT COMPARING ZCPLT
 LOOP AT IT_ZCPLT.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'NE'.
 IT_RANGETAB-VALUE = IT_ZCPLT-ZCPLT.
 APPEND IT_RANGETAB.
 ENDLOOP.
 WHEN 'NE'.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = 'NE'.
 IT_RANGETAB-VALUE = S_ZCPLT-LOW.
 APPEND IT_RANGETAB.
 WHEN OTHERS.
 IT_RANGETAB-AND_OR = 'AND'.
 IT_RANGETAB-OPERATOR = S_ZCPLT-OPTION.
 IT_RANGETAB-VALUE = S_ZCPLT-LOW.
 APPEND IT_RANGETAB.
 ENDCASE.
 ENDLOOP.
 ENDCASE.
ENDLOOP.
IF S_ZCPLT[] IS INITIAL.
 CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
 EXPORTING
 ACTION = 'U'
 VIEW_NAME = 'ZTAB'
 TABLES
 DBA_SELLIST = IT_RANGETAB
 EXCEPTIONS
 CLIENT_REFERENCE = 1
 FOREIGN_LOCK = 2
 INVALID_ACTION = 3
 NO_CLIENTINDEPENDENT_AUTH = 4
 NO_DATABASE_FUNCTION = 5
 NO_EDITOR_FUNCTION = 6
 NO_SHOW_AUTH = 7
 NO_TVDIR_ENTRY = 8
 NO_UPD_AUTH = 9
 ONLY_SHOW_ALLOWED = 10
 SYSTEM_FAILURE = 11
 UNKNOWN_FIELD_IN_DBA_SELLIST = 12
 VIEW_NOT_FOUND = 13
 MAINTENANCE_PROHIBITED = 14
 OTHERS = 15.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ELSE.
 CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
 EXPORTING
 ACTION = 'U'
 VIEW_NAME = 'ZTAB_ZTEST'
 TABLES
 DBA_SELLIST = IT_RANGETAB
 EXCEPTIONS
 CLIENT_REFERENCE = 1
 FOREIGN_LOCK = 2
 INVALID_ACTION = 3
 NO_CLIENTINDEPENDENT_AUTH = 4
 NO_DATABASE_FUNCTION = 5
 NO_EDITOR_FUNCTION = 6
 NO_SHOW_AUTH = 7
 NO_TVDIR_ENTRY = 8
 NO_UPD_AUTH = 9
 ONLY_SHOW_ALLOWED = 10
 SYSTEM_FAILURE = 11
 UNKNOWN_FIELD_IN_DBA_SELLIST = 12
 VIEW_NOT_FOUND = 13
 MAINTENANCE_PROHIBITED = 14
 OTHERS = 15.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDIF.
ENDFORM. " frm_get_data
*& Form frm_validations
* Validating field values
FORM FRM_VALIDATIONS .
* Material number should not be validated (10/17/2005)
CLEAR V_MATNR.
SELECT SINGLE MATNR
 INTO V_MATNR
 FROM MARA
 WHERE MATNR IN S_MATNR.
IF SY-SUBRC <> 0.
 MESSAGE E002 WITH 'Material not found'.
ENDIF.
CLEAR V_WERKS.
SELECT SINGLE WERKS
 INTO V_WERKS
 FROM ZTAB
 WHERE WERKS IN S_WERKS.
IF SY-SUBRC <> 0.
 MESSAGE E002 WITH 'Plant (WERKS) not found'(002).
ENDIF.
CLEAR V_KONOB.
SELECT SINGLE KONOB
 INTO V_KONOB
 FROM ZTAB
 WHERE KONOB IN S_KONOB.
IF SY-SUBRC <> 0.
 MESSAGE E002 WITH ' Product allocation object not found'(003).
ENDIF.
CLEAR V_WERKS.
SELECT SINGLE WERKS
 INTO V_WERKS
 FROM ZTAB
 WHERE WERKS IN S_ZCPLT.
IF SY-SUBRC <> 0.
 MESSAGE E002 WITH 'Plant (ZCPLT) not found'(004).
ENDIF.
ENDFORM. " frm_validations
reward points if it is usefull ...
Girish

Table maintanence generator Events and BADI

hi,
We are in middle of creating technical design. The scenario is given below.
A BADI is implemented and the we are writing code for saving data in a table and we are writing events in table maintanence generator for this table to validate the data before saving.
So if error occurs, we can't populate it as error message as this is done in between of BADI. So how to capture these error messages and give to BADI.
I am thinking to use EXPORT and IMPORT to memory. Will this work? Or is there any other method for this? I am not able to check in SAP as the client doesnt want to create anything before signing off the TD.

I answered the exact same question a few minutes back in another thread. Hope this works.
read table new entry
For the others who have answered this question:
I tried referencing the table directly and whenever i enter multiple entries the validations where failing. I could not do a loop at table. My validations were supposed to be triggered only at the time of saving the entries and not at the time of entry. Anybody has a workaround besides what i have described in the post??

Table maintanence generator with events

Hi ,
I am having a custom table for which 2 new fields were added .
Now the data for the two fields shold be populated depending on conditions using table maintanence generator .
the two fields are : date and time.
for every existing and new record the date and time shold be populated once the action is taken plae using SM30.
can you please provide the sufficient info to achive the same .
which events to be used and how the code should be ...
thanks

I answered the exact same question a few minutes back in another thread. Hope this works.
read table new entry
For the others who have answered this question:
I tried referencing the table directly and whenever i enter multiple entries the validations where failing. I could not do a loop at table. My validations were supposed to be triggered only at the time of saving the entries and not at the time of entry. Anybody has a workaround besides what i have described in the post??

Reg : Table Maintanence Generator

hi friends,
After creating a Z-Table,,we can create entries and diaplay the entries.
But then Why do we go for Table Maintanence Generator.
waiting for your answers
Reagrds
Vaja

Hi,
With the help of the table maintenance generator, you are able to maintain the ENTRIES of the table in SM30 transaction.
It can be set in transaction SE11 - Tools - Table maintenance generator.
Table maintanance Generator is used to manually input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under attributes tab
2) utilities-table maintanance Generator-> create function group and assign it under
function group input box. Also assign authorization group default &NC& .
3) select standard recording routine radio in table table mainitainence generator to move table
contents to quality and production by assigning it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers this dialog box appears when you click on create button
6) save and activate table
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
SM30 is used for table maintenance(addition or deletion of records),
For all the tables in SE11 for which Table maintenance is selected , they can be maintained in SM30
Sm30 is used to maintain the table ,i.e to delete ,insert or modify the field values and all..
It creates the maintenance screen for u for the aprticular table as the maintenance is not allowed for the table..
In the SE11 delivery and maintenance tab, keep the maintenance allowed..
Then come to the SM30 and then enter the table name and press maintain..,
Give the authorization group if necessary and give the function group and then select maintenance type as one step and give the screen numbers as system specified..
Then create,,,
Then u will able to see the maintenance view for the table in which u can able to insert and delete the table values...
We use SM30 transaction for entering values into any DB table.
First we create a table in SE11 and create the table maintenance generator for that Table using (utilities-> table maintenance generator) and create it.
Then it will create a View.
After that from SM30, enter the table name and Maintain, create new entries, change the existing entries for that table.
For further help look into these links
http://help.sap.com/saphelp_46c/helpdata/EN/cf/21eb6e446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/69/c2516e4ba111d189750000e8322d00/content.htm
Table
Hope this resolves your query.
Regards,
Omkar.

How to Hide a entire column in a Table Control?

Can we hide an entire column in a Table control? Plz give some hints in doing the same...

Here is a sample, if you wish to do it programattically. If you used the table control wizard, then you should have a module which is listed in the flow logic PBO of the screen. Its probably commented out.
itabcon_change_col_attr
Uncomment it and create the module. Then put the code that I have in the module below into your module.
report zrich_0003 .
*&spwizard: declaration of tablecontrol 'ITABCON' itself
controls: itabcon type tableview using screen 0100.
data: begin of itab occurs 0,
 fld1 type c,
 fld2 type c,
 end of itab.
start-of-selection.
call screen 100.
*& Module STATUS_0100 OUTPUT
* text
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*& Module ITABCON_change_col_attr OUTPUT
* text
module itabcon_change_col_attr output.
 data: wa like line of itabcon-cols.
loop at itabcon-cols into wa.
 if wa-screen-name = 'ITAB-FLD2'.
 wa-invisible = '1'.
 modify itabcon-cols from wa.
 endif.
endloop.
endmodule.
Regards,
Rich Heilman

How to hide/suppress empty columns in pivot tables

In a pivot table, is there any way to do something like "suppress missing data" to make an entire column hidden only if it is empty? I have a situation where I can't hide an entire measure because the measure has values for another dimension, but I would like to hide the column that is empty. See the example below. I would like to hide the combination of Dim1 and Measure 2, and the combination of Dim 2 and Measure 3. I can't hide all columns with Dim1 and/or Dim2, or Measure2 and/or Measure3. Is there any way to hide just the column with the empty combination? Thanks.
Dim1 Measure1 Always populated
Dim2 Measure1 Always populated
Dim1 Measure2 Always null
Dim2 Measure2 Always populated
Dim1 Measure3 Always populated
Dim2 Measure3 Always null

Bhawna -
That made a difference, but it still needs some work. The IfNull() function picked up every value in the columns that I wanted to hide and changed them to zero. The conditional formatting that you suggested hid the content in those columns from the HTML. However, there ended up being several issues:
1) IfNull() picked up other null values that happened to be in the resultset, so the conditional formatting was applied to more than intended. I could correct that by changing the data value in the physical database columns for the entire pivot table columns that I want hidden, but then I have to work around having bogus values in those intersections. Still, that is a possible workaround.
2) The column headers for the columns that I want to disappear did not go away. When I applied CSS display:none, it shifts the pivot table cells to the left, so a lot of the data ends up under the wrong column headings.
3) CSS display:none only hides the content from screen readers. When I view the pivot table on the dashboard and print it to a PDF, the data in the columns that I want to disappear are back.
That still seems like it's a long ways from "suppress missing data" for the entire column. Thanks for your suggestion.
Daniel

HOW TO HIDE FIELDS IN A CUSTOM TABLE

Hi all,
I've a requirement where there's a maintainence view attached to a custom created table. Whenever I add new entries via View, on saving the record, 2 of its fields only should appear.
For example, if my table looks like this,
SAP ID OBJECT ID FROM DATE TO DATE
Once i add a new record, when i press save, only 2 of fields say, SAP id and Object Id should appear instead of all the fields.
Can someone throw light on this if you're aware? Any input in this regard will be highly valuable to me and appreciated. If someone is unable to intrepret this question, do let me know, I'll detail it again.
Thanks in Advance,
Vaishnavi Varadarajan

hi Vaishu,
Hide parameter / select option in selection screen
We can Hide parameter / select option in selection screen dynamically by manipulating screen object.
SCREEN is like an internal table with a header line. However, you do not have to declare it in your program. Go to debugging mode and then view structure of screen.
You can modify SCREEN in your ABAP program during the PBO event of a screen. Its contents override the static attributes of the screen fields for a single screen call. The only statements that you can use with SCREEN are:
LOOP AT SCREEN.
MODIFY SCREEN.
ENDLOOP.
We can hide parameter by set screen-active to 0.
Here is example of how to hide parameter in selection screen. Write it, and change click on radiobutton to hide parameter.
REPORT ZAALGAL0006.
DATA: d_ucomm LIKE sy-ucomm.
PARAMETERS: p_grpa1(10) MODIF ID A,
p_grpa2(5) MODIF ID A,
p_grpb1(2) MODIF ID B.
PARAMETERS: p_actA RADIOBUTTON GROUP rad1 USER-COMMAND ACT DEFAULT 'X',
p_actB RADIOBUTTON GROUP rad1.
AT SELECTION-SCREEN.
d_ucomm = sy-ucomm.
AT SELECTION-SCREEN OUTPUT.
LOOP AT screen.
IF p_actA = 'X'.
IF screen-group1 = 'B'.
screen-active = 0.
ENDIF.
ELSEIF p_actB = 'X'.
IF screen-group1 = 'A'.
screen-active = 0.
ENDIF.
ENDIF.
MODIFY screen.
ENDLOOP.
START-OF-SELECTION.......
pls refer the below sites for reference. they may help you
http://www.blogtoplist.com/software/blogdetails-14026.html
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html
https:/.../servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/905e3d36-0301-0010-30ac-b55865545635
thanks
sagar
reward me points if usefull

How to do flipping of columns of table

Hi all,
i have created a script which should display the columns of table in seperate line ie, say there are three columns c1,c2 and c3. then the output should come as
c1
c2
c3
but in my case it is coming as
c1 c2 c3
how to solve this problem . i think flipping of tables will be helpful. can anybody write the syntax for me.
kindly help me out .
thanks

http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:766825833740

HOW TO HIDE FIELDS IN A CUSTOM TABLE - URGENT

Hi all,
I've a requirement where I need to hide 2 fields of a custom created table(Z table with 4 fields). When I create a new record and when I Click on save it should display only 2 fields instead of all the 4 fields.
A table maintainence generator is created for this table. Can somebody help me on how and where to code to hide 2 fields whenever I click on save creating a new record.
All inputs in this regard will be highly valuable to me and appreciated.
Thanks in Advance,
Vaishnavi Varadarajan

Use events in table maintenance generator '05' and write the code.
go to se11-table name-utilities-table maintenance generator-extras-events in table maintenance generator . In the source code
Put form abc.
code.
endform.

How to hide a data column in a planning Layout

Hi experts,
we use BW-BPS and I need some datacolums in planning layout, which should be calculated.
Rest Volume = Forecast - Actual
The customer wants to see only the "Rest Volume".
But i need for calculation Forecast and Actual values, which are available in Infocube.
Do you know how to hide some colums in planning layout ?
thanks a lot.

Write a one line macro in SAPAfterDataPut sub module and check the option in the tab MS Excel Settings in the last screen of the layout.
Sample macro:
suppose the column you want to hide is 4.
columns(4).hidden = true

How to see column in table maintenance generator?

Hi All,
Can we write code in table maintenance generator ? where can we write code?
suppose I have created table maintenance generator but column is not visible what might be reason? How to deal with this?
Can any 1 help me in this regard?
Thanks in advance.

Hi,
column is not visible
This may be because of additioni of a new field in the table after you have generated the TMG.
Delete and re-create the object in TMG again.
writing code in table maintenance generator
Yes, you can write.
SE54 --> Environmnt --> Events --> New Entry
Select the event ..eg.
01 for Before saving the data in the database
02 for After saving the data in the database
Press enter. Click on the editor button and start writing your codes in the routine.
Regards,
Firoz.

How to hide/invisible a column in table maintanence generator????

Similar Messages

Maybe you are looking for