How to hide Jump list's Tasks in Windows 7 using userChrome.css

Try to disable some browser.taskbar.*enable prefs on the about:config page.
* http://kb.mozillazine.org/about%3Aconfig

Similar Messages

How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj

How to hide a list from SharePoint tree view pro grammatically.

Hi,
I have enabled tree view for a SharePoint 2013 site pro grammatically.
I want hide some specific lists from that tree view like Documents, Workflow, Task List, Calender
Lists which are created default when we create a site.
How could i do that?

I know how to hide Quick launch and Enable Tree view with properties in C#.
My question is
hide some specific lists from that tree view like Documents,
Workflow, Task List, Calender
Lists which are created default when we create a site.

How? - Chat "Participants" list on left of window, not the default right

The one way I have done is to click View --> Hide Chat Participants, then move the window to the far right side of the screen, then click View --> Show Chat Participants. This forces the list to slide out from the left of the window, not the right side.
This works perfectly but does not stay set that way. I was able to do this in the past, but how can I force the chat participants list to always display to the left of the chat window instead of the right?
This is a new issue since moving to a MacBook Pro from a G5, however the G5 was also running iChat 3.1.4 on OS 10.4.6. What gives?

Hi Brent,
iChat will work windows like this.
All types of incomoing invites has specific screen places
Video is top center. Text and Audio is top right of the screen.
No matter what you do to these windows including changing the position and in your case the Participants drawer it will always open a new chat in the same place.
Out going ones are different. With these they will open at the point you last closed one.
The group Text chats also tend to remember which side the drawer was.
I know no way of changing this behaviour.
The defaults for this are held in com.apple.ichat.plist
In theory the App can write to this file and achive and edit.
Property List Editor that come if you install the Developer Tools is supposed to Edit them (.plists) and of course you get some hidden preferences in these files that can be edited by using Terminal like this one.
I have never found the Prpperty List Editor successful.
I don't know enough about Unix to suggest how to command the .plist from Terminal.
The Original .plist will be recreated if you delete the current one if you play with this yourself and have problems. (on the next restart of iChat)
11:30 PM Friday; June 23, 2006

How-to hide the portal file shares on Windows

Hi,
Does anybody know how to hide the default file shares created by SAP NW 04 in windows?
In other words: what I'm trying to accomplish is renaming the sapmnt share and saploc share (both on the E:\usr\sap\ folder) to sapmnt$ and saploc$.
I know how to do the Windows part, but where and how do I configure the SAP Web AS part?
Regards,
Steven Dijkman

Hi guys,
Thanks for all the feedback. However, this still does not fully work.
I tried hiding the folder but it in fact only hides the folder, not the share itself. I'm trying to do the opposite, hiding the share (making it an administrative one) whilst not hiding the folder. With the folder hidden, the startup framework (NW 04 EP6 SP12) does not work.
By the way: checking / tightening access is not an option: security architects dictate what needs to happen here and unless I have VERY good reasons I should comply to what they say: change saploc to saploc$ and change sapmnt to sapmnt$.
If anybody has anymore thoughts, I'd be very interested.
Cheers,
Steven Dijkman

How to redirect from list edit form to another page using jquery in sharepoint 2013

hi friends i have been trying to find a way to redirect from list edit form to another page using javascript and jquery
i found lot of codes online but non of them are working for me.
what i need is i have to save the data in the form and after that it has to redirect to another page. it has to get the url from hyperlink field of the item.
please help me in this regards

Not sure if you have gone through below links:
http://spservices.codeplex.com/wikipage?title=%24().SPServices.SPRedirectWithID
http://blogs.askcts.com/2013/02/18/using-spservices-and-jquery-to-perform-a-redirect-from-a-sharepoint-list-newform-to-editform/
Please ensure that you mark a question as Answered once you receive a satisfactory response.

How to hide the list screen

HI all,
When i am calling another screen from my report program to display the result. I am Able to display the result on the intended screen but when i click on back the back button it is returing to the list screen first and than next to the selection screen.
I dont want to get the list screen in between but only the selection screen should be displayed when i click on the back button.
How to avoid the display of the list screen.
Thanks in advance.
Regards
Satish.

Hi,
Could u plz give the part of code where u get this problem. Need to know whether u r calling a transaction?
Try this
MODULE user_command_9100 INPUT.
CASE sy-ucomm.
    WHEN 'EXIT' OR 'CANC'.
      LEAVE.    " to SCREEN 0.
    WHEN 'BACK'.
      SET SCREEN '0'.
      LEAVE SCREEN.
This leaves the program but you may need to re-call the
transaction to go back to the original screen
    WHEN OTHERS.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9100 INPUT
Message was edited by: Judith Jessie Selvi

How to Hide reception list in BW information broadcasting

Hi All,
We are sending our BW reports from mail using Information broadcasting functionality and it is working properly.
Now we are having a requirement to hide the reception list ( All member who receives mail).
i.e when we send a mail it should not show who have been marked in the mail.
Please suggest.
Regards,
Macwan James

Hi,
We can just create a Generic Mail Id with all Distribution List( required mail Ids) and can put this single Mail id in the Information Broadcasting. there are 2 advantages in this, First as you require, we cant see the other mail ids, and if there is any change in the distribution list, we need not to change the list in information broadcasting now and then, so less work. we can only change the Distribution list, which can be maintained by any manger.
Hope it has given some insight.....

How to send current list item URL in email by using sharepoint 2010 workflow?

Hi All,
I had created sharepoint workflow usind SPD 2010. when new item is created it sends the email with link. But it sends current list link not the current item link.
I tried to use Encoded Absolute URL but this like
http://asdf.com/Lists/abc/10.00
but i need something like this
http://asdf.com/Lists/abc/DispForm.aspx?ID
I have grow thorough some post and i found that,
Statically i can write http://asdf.com/Lists/abc/DispForm.aspx?ID= and from Add lookup i can get ID by choosing current item.
The link which i get is partially hyperlink like this
http:aasdf.com/Lists/abc/DispForm.aspx?ID=10 (here 10 is not hyperlink)
when i copy and paste this link it works fine but by clicking it i am not getting true result.
Please help me to solve this issue.
Thanks.

Hi Raymond,
It works for me. Thank you so much.
I also have another issue related workflow. If you can help me, i really appreciate you.
I already configured AAM. I have two Share Point Address which are:
Default : http://default.com
Internal : http://intranet.com
I have List workflow using SharePoint Designer 2010. When new item get create, it sends email to person for approval. But when it sends email it sends Dafault zone URL.
Dafault zone URL is only accessible through Virtual Machine. We cant access from local machine. So i need to send intranet zone URL in email so user can open through local machine.
I tried it but i can only able to do for one list. I have to so this general for every list.
How can i send intranet zone URL?
Swapping the zone URL is not solution for this issue because after swapping situation is same.
Thank You.

2008 R2 GPO How to delete the AppleSoftwareUpdate Scheduled Task on Windows 7 clients?

How do you configure a GPO in AD 2008 R2 SP1 that will delete the AppleSoftwareUpdater Scheduled Task. I can't successfully create one. It gives errors wanting a name and an action, even though I have named it (several variations tried). The scheduled task
is in the \Apple\AppleSoftwareUpdater folder in Task Scheduler on the local machines. I can't find any good information at all for deleting scheduled tasks. I have read the MS documenation and it is very vague.
If you know how to configure a GPO in AD 2008 R2 SP1 that will delete the AppleSoftwareUpdate scheduled task on client computers running Windows 7, I would really appreciate a quick answer. Our new computers are being deployed and the image creator
did not configure this setting.
I know there are several methods for accomplishing the same thing but I don't want to do it that way unless I have to. Please don't post unless you know.

Howdie!
On 29.03.2011 19:40, jcdodsr wrote:
> How do you configure a GPO in AD 2008 R2 SP1 that will delete the
> AppleSoftwareUpdater Scheduled Task. I can't successfully create one. It
> gives errors wanting a name and an action, even though I have named it
> (several variations tried). The scheduled task is in the
> \Apple\AppleSoftwareUpdater folder in Task Scheduler on the local
> machines. I can't find any good information at all for deleting
> scheduled tasks. I have read the MS documenation and it is very vague.
So I assume you have tried naming the Scheduled Task just the same way
the AppleSoftwareUpdater is named on the client and chose "Remove" as an
Action?
If you have and it doesn't work, can you turn on Preference logging?
Cheers,
Florian
The views and opinions expressed in my postings do NOT correlate with the ones of my friends, family or my employer.

How to hide the cucilync 9.2.5 window

Hi,
I am pretty sure there should be a way to hide the cucilync window, our customer does not want to have two different windows.
Any idea?
Thanks,
HM

Hey
Did you ever get a solution here by chance. Also how is the experience customer wise thus far...im a little cautious to implement :)

How to get the list of parameter and set them using RESTFul WS for a Crystal Report

Hi All,
I am able to schedule a Crystal report using following POST Restful call - http://localhost:6405/biprws/infostore/4738/scheduleForms/now and with a request xml body. But report is failing because I am not passing the parameter.
But I need pass parameters/prompts to the Crystal report to execute successfully.
What is the request XML to pass the parameter for the report?
I was able to do this for WEBI reports but I am not able to find any way to do this for Crystal reports?
Any help on this matter is really appreciated.

Hi Venki
Please have a look at:
How to pass parameters and generate the report using RESTful API in VB.net
This is also described in the Developer Help files:
http://help.sap.com/businessobject/product_guides/sbo41/en/sbo41_webi_restful_ws_en.pdf
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

How to get the list of communities of a user using EDK

Hello,
I am developing a portlet which needs to get the list of communities in which the logged-in user is a member. I am using EDK 5.0.1.
I can't find a way to retrieve this information using the EDK I am using.... Would you please help?
Thank you in advance.

Hey Ramy,
A bit off the top of my head, but try this:
IPortletContext PortletContext;
IRemoteSession PTSession;
PortletContext = PortletContextFactory.CreatePortletContext(Request, Response);
PTSession = PortletContext.GetRemotePortalSession();
privatevoidgetCommunities()
IObjectManager Manager = PTSession.GetObjectManager(ObjectClass.Community);
IObjectQuery Query;
Query = Manager.QueryObjects(-1, 0, -1, ObjectProperty.Name, true);
for(inti = 0; i <= Query.GetRowCount() - 1; i++) {
string sCommunityName = Query.GetRow(i).GetName();
string sCommunityID = Query.GetRow(i).GetID().ToString();
Cheers!John

HOW TO HIDE USERID PARAMETER, WHEN CALL REPORT FROM MENU USING FORM 10G

good morning colegas
i'm from panama
when i call a report from a oracle forms menu, its send a user, pass and bd in the url, i need to hide this parameter userid,
cuando llamo un reporte desde forms, se envia el usuario, pass y bd en el url nesesito ocultar estos parametros del url, le agradeceria si alguno tiene algun eejmplo q me de, de como ocultar estos parametros
i'm using oracle forms y report 10g
this is my msn [email protected]
slds desde panama

this document show us, only when i call a report from a forms, but not from a menu!
but to hide these parameters, i need to create a bean in a block a way and the menus do not allow me to create these objects
you done this before?
you have a example?
slds desde panama

How to hide lookup field which is having 20+ items using jquery?

Hi All,
I am able to hide the lookup field which is having less than 20 items using jquery, but unable to do it when it goes beyond 20 items.
My code is for <20 is: $("select[title = 'Column-lookup']").closest("tr").hide();
Thank You.
Ramanjjilu Naidu

Below code is working for me in all browser even with 24 lookup item
<script type="text/javascript" src="https://code.jquery.com/jquery-2.1.0.min.js"></script><script type="text/javascript">
$(document).ready(function(){
$('select[title="Column-lookup"]').closest("tr").hide();
</script> <br/><br/>
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

How to hide Jump list's Tasks in Windows 7 using userChrome.css

Similar Messages

Maybe you are looking for