How to hide or make the router from others seeing it

HI
I just installed my new router and with my old one, if I went outside looking for a network the router will be invisable or not listed. How can I do this with my current router?
Thanks

If you’re using the Linksys Smart Wi-Fi firmware on your EA2700, disabling the SSID broadcast is not supported.

Similar Messages

How to read and store the documents from other system to own system.

Hi Experts,
i need to read the document from other system (Say from other connected R/3 system) and then i need to save it in my system.
Please suggest how would i proceed?
Any helpful suggestion will be rewarded with points.
thanks
Snehasish

Hi Abaper
I think I havent explained my problem well. Here I am explaining it again..
I want to pull an *.excel/ *.csv file through ABAP code.The target file that I want to access in my ABAP code is stored into another PC in the same Local area network under some directory say 'c:\temp\credit.csv'.
I have the logon information of the target file's PC.
Please help me with code if anyone of you having.
Thanks in advance.
Rgds,
Snehasish
Edited by: Snehasish Das on Apr 29, 2008 2:18 PM
Edited by: Snehasish Das on Apr 29, 2008 2:33 PM

How to hide or make the row invisible in RTF report?

Hi ,
I am setting a flag = 'Y' in one condition as i want to display records only if flag = 'Y'. It is not displaying data in case flag != 'Y'.But it is displaying empty row in report for the record which does not have flag = ' Y'. How to hide those empty rows?
See following code for example:
<?for-each: LIST_G_STORE_ID/G_STORE_ID?>
<?xdofx: if STORE_ID = '' then '-' else STORE_ID?>
<?for-each: LIST_G_TRANSACTION/G_TRANSACTION?>
<?for-each: Q1?><?if: PLAN_CODE = 'PLN'?><?xdoxslt:set_variable($_XDOCTX,'flag', 'Y')?><?end if?><?end for-each?>
<?if: xdoxslt: get_variable($_XDOCTX,'flag') = 'Y'?><?xdofx: if TRN_DATE = '' then '-' else TRN_DATE?><?end if?>
<?for-each@inlines:LIST_Q1/Q1?>
<?if: xdoxslt: get_variable($_XDOCTX,'flag') = 'Y'?><?xdofx: if INVC_NUM= '' then '-' else INVC_NUM?><?end if?>
<?for-each@inlines:LIST_Q1/Q1?><?if: xdoxslt: get_variable($_XDOCTX,'flag') = 'Y'?><?xdofx: if substr(PLAN_CODE,1,3) != 'PLN' then PRODUCT_CODE?><?xdofx: if PLAN_CODE!= 'PLN' then ','?><?end if?><?end for-each?>
<?end for-each?><?xdoxslt:set_variable($_XDOCTX,'flag','N')?>
<?end for-each?>
<?end for-each?>
please advice or let me know if more detail is needed.
Thanks in Advance!!

<?for-each:LIST_G_STORE_ID/G_STORE_ID [PLAN_CODE ='PLN' ]?> will only show the rows where that value of xml field PLAN_CODE is equal to 'PLN'.
Hope this helps
Domnic
Edited by: Domnic_JDE_BIP on Apr 12, 2010 5:47 PM

How to Hide adress of the form from adress bar

Hi all ,
i want to ask that is it possible to hide or change the adress of the form from the adress bar.....like when we run the form it shows the adress like
http://develoment:8888/forms90/f90servlet?form=C:\GMS\Forms\GMS_SHIPMENT.fmx&userid=GMS/GMS@gms&buffer_records=NO&debug_messages=NO&array=YES&query_only=NO&quiet=NO&RENDER=YES
that is too long i want it does not show the whole adress and also same problem with reports when i call the the report it show the whole adress and that is not good security wise
i am using oracle 9IDS
thanks in advance
Shayan
[email protected]

go in your <forms-home>forms\server - directory. there is formsweb.cfg.
All the [default] - parameters are global. If you don't set a parameter in your own section, then the fallback-parameters are stored there.
at the end of the file you should write your own settings:
e.g.
# myConfig - this is an example for your own Config-Section
[myconfig]
form=myStartForm
imageBase=codeBase
splashScreen=no
separateframe=true
try it
Gerd

How to hide one of the unions from the results?

Hi all,
I have a graph which contains 5 unions. The top query is used to pass the functions and the other 4 are the ones that really doing the caclutaions. Is there any way to hid one query from results?
Thanks in advance.

Hiding based on what? If it is a prompt, assign a presentation variable and add a condition to the filter of your desirable result-set in a structure like:
CASE WHEN '@{myPresentationVariable}{DefaultValue}' = 'WhateverValueIWant' THEN 1 ELSE 0 END = 1

I want to make the switch from 5 iphone5 to pay the difference and how much?

I want to make the switch from 5 iphone5 to pay the difference and how much??he's locked icloud already bought it so now I'm not using as too expensive and thought this possibility .... you guys can help me ... thank you for it helped

Unfortunately there is little you can do, Lion will not run on your machine.
However it is possible to access some features of iClould while staying with SL. If you go to iCloud you will see the web interface for the cloud.
Some but not all functionality is here. Check it out and see if it meets your needs.

To make the change from MobilMe I will have to update from System 10.4.11 to 10.7.2. How many system and firmware updates will I have to do?

To make the change from MobilMe I will have to update fro System 10.4.11 to 10.7.2. How many firmware and system updates will I have to make

First, see if your system can run Lion:
http://www.apple.com/macosx/specs.html
If you have any PPC apps, none of them will work under Lion.
If you meet the requirements for Lion, you can go to Snow Leopard(US $29), then update to 10.6.8, then update to Lion(US $29).
Apple says 2GB's of memory minimum. I wouldn't update to Lion unless you can run at least 4GB's.

How do i make the imessage from my macbook be sent from my number and

how do i make the imessage from my macbook be sent from my number and not from my e mail address?

MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
This forum deals with a desktop/tower 65lb Mac Pro
http://www.apple.com/support/macpro
http://www.apple.com/support/iphone
http://www.apple.com/support/icloud/

How do I put all the songs from a compilation album into the same /album/folder in Itunes v12

How do I put all the songs from a compilation album into the same /album/folder in Itunes v12 i know in other versions it was via get info but as all of the tunes have the same album title , I am not sure what tio change to achieve this ?

I don't see your screenshot but I assume you're starting with something like this, i.e., the compilation split into multiple albums:
If you select all the items that you want to be in a single album, right-click > Get Info you'll see this:
As you say, in iTunes 12 you don't see a field to enter a distinct Album Artist value. You can, however, address this by clicking the Add Field button and selecting Album Artist:
That makes the field available in the metadata dialog so that you can enter the required value:
You can also show the pre-iTunes 12 version of the dialog by holding the SHIFT key when selecting Get Info - this allows you to enter the Album Artist directly:

Make the link from the single cell of Bex Report and the image of bill

Hi guys,
my client scan every bill and archive the image by File.net technology.
In our Bex Report we have the Bill number and we want to make the link from the single cell and the image of bill.
The possible paths to solve the problem are:
Replicate the image in BW and crate a link from the single cell and the image of document.
Create an URL link from the single cell and the image of document archived on File.net server.
In witch way we can to implement the two paths?
Thank you.
Alessandro

Hi Alessandro,
Have you seen "How ToEnhance your Web Query with the Table Interface"?
You can find it in media library:
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000194044
Best regards,
Eugene

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

How can I get all the stuff from my old iPad 2 to my new iPad 2? I have an apple id and have synced and backed up my old iPad 2 regularly.

How can I get all the stuff from my old iPad 2 to my new iPad 2? I have an apple id and have synced and backed up my old iPad 2 regularly.

Sky is right you can restore the old backup and it will not affect the old iPad
To make sure do this:
1. If you have the old one then just turn off wi-fi and the iPad (that's just for your peace of mind)
2. Put new iPad on airplane mode (just for no interruptions )
3. Connect it (while it's on, don't shut it down)
4. Follow prompts and when it asks if you want to setup as new or restore CHOOSE: RESTORE
5. It will make its magic (just wait for it to sync, restarts, and finishes) it might ask you to update software if it does just accept
6. You can rename your new iPad like that you can have a fresh back up
7. ENJOY your new iPad
----------OR-----------
1. Do the above steps 1, 2, 3.
2. On step 4 you can choose to set up as new
3. Then you can choose what to sync on it (click on iPad on the left panel then the tabs on top you choose what you want on it (you can also do that if you restore)
4. Follow steps 5, 6, 7.
****If you don't have your old iPad you can remove it from your account ****
****Also when they sync it to a new computer it will setup as new unless they had an old one then they will restore it their old one****
****if you have it connected with your MobileMe or iCloud and you have the find my _____ you can also wipe it as soon as it comes online****
LET ME KNOW IF YOU HAVE ANY QUESTIONS OR CONCERNS
AGAIN ENJOY YOUR NEW IPAD!!!

How to hide 'catalog','open',home' link from dashboard page in obiee11g ?

Hi,
how to hide 'catalog','open',home' link from dashboard page in obiee11g based one users/groups.
http://imageshare.web.id/images/e7tosu6qtsa9zdl1a8w8.jpg
i.e: some users shold not able to see 'open','catalog',home link from dashboard but some power user/groups can able to see the 'open','catalog',home link.
Thanks
Deva

Hi,
I don't want to remove totally, what i am asking is there any
Possibility to do users/groups wise,
E.x:
Work around home page
Setting home page each users/groups wise . I am expecting like that option to
Do open and catalog link.
Home link not a priority .
http://obieeelegant.blogspot.com/2011/06/how-to-changing-theobiee11g-homepage.html
Thank
Deva
http://obieeelegant.blogspot.com

How to hide Print and Filter option from dynamic ALV

Hi,
I have created the dynamic ALV. now User don't wan't Filter , export,print Option on the ALV dispaly.
Could you please tell me How to hide Print and Filter option from dynamic ALV.
Thanks and regards
Amita.

Hi,
Please go through the following link to get an better idea on ALV.
[https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/1190424a-0801-0010-84b5-ef03fd2d33d9&overridelayout=true]
This is the code which you have to write in WDDOINIT
DATA LO_CMP_USAGE TYPE REF TO IF_WD_COMPONENT_USAGE.
LO_CMP_USAGE =   WD_THIS->WD_CPUSE_ALV_TEST( ).
IF LO_CMP_USAGE->HAS_ACTIVE_COMPONENT( ) IS INITIAL.
LO_CMP_USAGE->CREATE_COMPONENT( ).
ENDIF.
DATA LO_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
      LO_INTERFACECONTROLLER =   WD_THIS->WD_CPIFC_ALV_TEST( ).
        DATA LO_VALUE TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
        LO_VALUE = LO_INTERFACECONTROLLER->GET_MODEL(
lo_value->IF_SALV_WD_STD_FUNCTIONS~SET_EXPORT_ALLOWED( abap_false ).
lo_value->IF_SALV_WD_STD_FUNCTIONS~SET_PDF_ALLOWED( abap_false ).
lo_value->IF_SALV_WD_STD_FUNCTIONS~SET_VIEW_LIST_ALLOWED( abap_false ).

Trying to make the jump from JPEG to RAW...

Hi all, I'm trying to make the jump from JPEG to RAW, and am hoping you might be able to help with a few questions.
When I open JPEGs in Lightroom's Develop module, the settings are mostly zero by default. But when I open RAW files, some of the settings seem to have non-zero default to values.
Am I correct to think these settings are from metadata saved into the RAW file when I took the picture? eg, the camera saves the White Balance settings as metadata within the RAW file, even though the White Balance settings don't actually affect the image data itself. And so when I open that RAW file in Lightroom, it'll apply the White Balance as recorded within the file, making that a non-zero default.
Is that about right?
Does Lightroom similarly 'pre-set' other values when importing RAW files? (I ask because I seem to have non-zero settings for Blacks, Sharpening, as well as the Color slider under Noise Reduction.)
Meaning: I'm not quite sure "how much work" Lightroom is doing by default when I import RAW files, and how much I need to do to at least reproduce what my camera would do in making a JPEG.
For example, even though Color under Noise Reduction is given a value -- Luminance, also under under Noise Reduction, is left at zero. And the picture looks a bit grainy. Would my camera have processed some Luminance Noise Reduction? If so, is there a way to get Lightroom to help get that pre-set too?
Basically, is there a rule of thumb for how a novice should import a RAW file and have it reasonably "at least as good" as what the JPEG would have been?
Thanks very kindly, -Scott

Given that the camera ships with so many special effect presets -- is there no built-in preset that could be named "Auto Camera" so to speak? Or might it be possible import such a preset that somebody else has made?
Lightroom, nor any other third party raw processing program will not read the camera settings beyond simple stuff such as white balance. So you cannot do this. If you go raw, you really have to change your mindset and completely ignore the in-camera jpeg styles. Just set it to a neutral style and learn what the preview on the camera means for the actual raw data. You will find that this gives you orders of magnitude more creative freedom afterwards as you will not be stuck with a burned in interpretation.
So (for me) even just making my own presets -- let alone making separate presets for every ISO -- all that seems a bit daunting.
There really is no need to at all. I don't use presets for example. I think they are a waste of time as it is extremely rare that two images need exactly the same treatment. You really are just choosing a different starting point. I start all my raw at a relatively neutral setting (but using a camera profile generated from a colorchecker!) and blast through a shoot very quickly. You'll learn how to recognize what modifications to the Develop settings images need and just do it. Then typically I use auto-sync or manual sync to modify similar shots (say a series of head shots taken shortly after each other). I work differently as most of my photography is landscape, but a typical workflow for many photographers that do more people/style/event stuff is to import all the raw and start culling them with pick/reject flags and refine collection. You'll arrive at a subset that is worth looking at more closely and to finetune their development. The conservative default rendering helps you here because you'll quickly see what images are simply badly exposed, not in correct focus, etc. and you can reject them.
Think of your raw as the unprinted negative. It represents a nascent image. One that still has to form completely. A jpeg is like a polaroid. The image style is pretty much chosen for you by the film maker. There is very little you can do to it afterwards without it breaking down. Raw gives you much more freedom but it does come with a learning curve and it is more tasking for your equipment. Many people including many pros are simply not interested (or don't see the pay off) in this part of the creative photographic process and just shoot jpeg, which is a fine approach (just not mine). Lightroom can help you there too to quickly find the best images in a series, keyword, caption, and disseminate.

How to hide or make the router from others seeing it

Similar Messages

Maybe you are looking for