How to Hide Oracle BAM logo in Header

I want to generate a list in full window. Is there any way to hide the Oracle BAM logo at the Header?.

Do you mean the "Oracle BAM Active Viewer" logo? You can get a direct URL to your report via the Active Studio Copy Shortcut command. Then host the report in your own web page within an iframe. You can also just view the report directly in IE via the URL.
Regards, Stephen

Similar Messages

How to hide Saved Searches in the header area of web ui

Hi All,
My Query Is how to hide Saved Searches in the header area of web ui.
For This is there any configuration or we have do through the code.
Thanks & Regards,
Venkat

Another approach:
Open view CRM_WORKAREAHDR/WorkAreaHeader and change the configuration. There is a button in the bar named "Attributes" (probably hidden under MORE).
Once in there in edit mode substitute the content of attribute "UI_COMPONENT_3". It should be
Window=CRM_ALLSEARCHES.CRM_ALLSEARCHES/LauncherWindow;horizontalAlignment=right;
put there a
Width=0px;
The other way using business role is fine as well.
cheers Carsten

How to hide remote IP address in header for roaming users

Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
Hello everyone,
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam. What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.
Any assistance on this would be greatly appreciated. Thanks in advance.

MarketData.com wrote:
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam.How often is this occurring (messages being blocked as "spam" due to the content of an existing Received header)?
What spam software is being used that blocks these messages?
Very large organisations/ISP's use Sun Messaging Server and this is the first time I have heard of this occurring.
What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.Removing the IP address information is going to be extremely difficult. The standards are quite clear that the Received: header should include the IP address information.
RFC 2821 (SMTP), Section 4.4 Trace Information:
   When an SMTP server receives a message for delivery or further
   processing, it MUST insert trace ("time stamp" or "Received")
   information at the beginning of the message content, as discussed in
   section 4.1.1.4.
   This line MUST be structured as follows:
   - The FROM field, which MUST be supplied in an SMTP environment,
      SHOULD contain both (1) the name of the source host as presented
      in the EHLO command and (2) an address literal containing the IP
      address of the source, determined from the TCP connection.Regards,
Shane.

SharePoint Online, how to hide the SharePoint logo on a list using css or jquery

Hi
Im creating a page for submitting forms. I want to remove the SharePoint Logo on from the page. Can this be done in CSS or jquery?
brgs
Bjorn

hi
you need to include the below style in your page
td.s4-titlelogo{
display: none;!important;
http://sharepointwings.blogspot.in/2012/03/adding-custom-css-in-sharepoint-2010.html
http://microsoft-techies.blogspot.in/2014/03/sharepoint-2013-how-to-remove-default.html
Or find the class name of logo in my case it is "ms-siteicon-img"using f12 (firebug) tool.
$('.ms-siteicon-img').hide();
or
var img1= $('.ms-siteicon-img');
img.style.display="none";
and this must be in document.ready method.
$( document ).ready(function() { var img1=$('.ms-siteicon-img');img1.style.display="none";});
Regards,
Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
http://sharepointundefind.wordpress.com/

How to hide SAP logo ?

Hi ,
After login in the portal SAP logo comes in heading tab . How to hide that SAP logo?

Hi Smita,
Please go through below notes based on your portal release
1906707
How to customize favicon.ico image for SAP NetWeaver 7.1X onwards version
1906728
How to customize favicon.ico image for SAP NetWeaver 7.0X version
1907215
How to customize favicon.ico image for SAP NetWeaver 7.0X version globally
1908436
How to customize favicon.ico image for SAP NetWeaver 7.1X onwards version globa
Hope this solves your issue.
Regards,
Prithviraj

Oracle BAM 11g - Deployments and development questions

Hi!
I have few questions related to Oracle BAM 11g developement and deployment processes. We are going to use that together with Oracle SOA Suite 11g ( BPEL / BPM processes), and now my questions are related to development phase:
1. If we have two or more Oracle BAM developers with their own Oracle BAM server instances, and we would like to share our development work, should/can we you same database repository to share the reports, data objects?
2. How we can copy Oracle BAM Data Objects, Reports etc from one environment (dev) to other environments (test, accept test, integration test, production) ? In software deployment projects (like Spring or Grails web-projects) we have used version control system and CI to build packages to different environments etc. How is the Oracle BAM deployment process actually "planned to be" since it uses its database repository to store objects and reports ?
3. The Oracle BAM itself has nice reports etc (Oracle BAM Client) that can be used using IE browser. How if we have to show/include those reports from Oracle WebCenter Spaces ? Is it possible and how?

Hi,
Were you able to find the answer to your questions? Especially the one, showing BAM reports in Webcenter Spaces?

How to hide windows heading and border on WEB?

How to hide windows heading and border on WEB? forms 6i.
null

Abdetu wrote:
Thanks JeanYves
i found that parameter but didn't know what to set to it i even has no forms in my pc thanks again
Regards,
Abdetu...Hi Abdetu,
There is 3 parameters in the <DevSuiteHome>\forms\server.formsweb.cfg having the same behavior.
Logo
Background
SplashScreen
By default (if you don't have specified them in you [section] they values are inherited from the [default] section) the values are
Logo=
Background=
SplashScreen=
This means you will have the oracle logo, the Forms Services background image in your applet and the oracle splash screen at startup.
*To have nothing shown then just put the value no in front of these 3 parameters*
Logo=no
Background=no
SplashScreen=noYou can also customize that with you own gif files.
For this you have to put your images in a icons.jar file
place it in your <DevSuiteHome>\forms\java where frmall.jar and others are located.
then in your formsweb.cfg :
Archive=frmall.jar, icons.jar
ImageBase=CodeBase
Logo=yourlogo.gif
Background=yourbackground.gif
SplashScreen=yourbeautifullsplachscreen.gifAnd at least if you have a small gif in your icons.jar for the window you can also defining the Icon Filename property in Forms builder. This wile replace the default forms runtime icon.
Hope this helps
JeanYves

How to hide Header Page in Report Builder 6.0

Hi,
I am trying to modify the existing report. My requirement is to add a cover page to the report. Based on condition the cover page should not be displayed.
Ex: If currency='USD' then
cover page along with the report body
else
if currency = NULL then
report body should be displayed.
I wrote a format trigger on cover page frame. but it is displaying blank page as first page. It should not display blank page.
Format trigger:
function M_Cover_Page1FormatTrigger return boolean is
begin
if (:CP_currency IS NULL)
then
return (FALSE);
end if;
return (TRUE);
end;
Please help me out how to hide header page in report.
Thanks & Regards,
Sateesh kumar S

Patchset 1663658
Simple Search Advanced Search Quick Links Saved Searches
Description Forms & Reports 6I-PATCH-4 for (NT,95,98,2000)
Product Oracle Developer Family
Release 6i
Platform or Language    -------- Platforms --------Microsoft Windows (32-bit)
Last Updated 11-MAY-2001
Size N/A
This patchset is obsolete in this platform and language. Please see the reason stated below. Please contact Oracle Support for replacement patch.
Reason for Obsolescence
Forms&Reports 6i-Patch-4 for WindowsNT has been obsoleted, owing to the fact that a later verison, <b>patch-4a is now available for download via metalink</b>
Patchsets known to include or supersede Patch 1663658
No information available from the patch repository
Download Notes
Click here for the UNZIP utilities for most platforms.
You may also download patches using any FTP client by connecting to updates.oracle.com. Connect with your Metalink username and password and read the welcome banner for more instructions. Looks like you want patchset 1747364 now. As soon as you get into Metalink, change the Quick Find drop down to be "Patch Number" and put "1747364" into the search text box. This should pull up the patch you need.

How to hide a dynamically generated header bean whose label alone is known

My requirement is to hide a header bean whose label alone is known (id is not known).
The header bean is generated dynamically by the following oracle code . Multiple header beans are created under a stacklayout based on vector size.
for(int j = 0; j < vector.size(); j++)
String s12 = (String)vector.elementAt(j);
OAHeaderBean oaheaderbean = (OAHeaderBean)createWebBean(oapagecontext, "HEADER");
String s14 = (String)hashtable.get(s12);
String s15 = (String)hashtable1.get(s12);
oaheaderbean.setLabel(s14);
oawebbean.addIndexedChild(oaheaderbean);
OATableBean oatablebean1 = (OATableBean)createWebBean(oapagecontext, oawebbean, "HrEitTable", s12);
oatablebean1.setWidth("80%");
oatablebean1.setID(s12);
In about this page:
header: Custom Test A
Here s14 corresponds to "Custom Test A"
I am able to hide the table bean, as its id is known. How do i hide the header bean whose label is "Custom Test A"

Ok,
I've decided to use the following workaround (it works and, at the same time, keeps my pages rather clean. i.e. without hard-coding and with the navigation logic in a Java class):http://forum.java.sun.com/post!reply.jspa?messageID=10089545#
In the main view:

<jsp:scriptlet>
pageContext.setAttribute(ViewConstants.PageIdAttribute,"/prods/prodlist", PageContext.REQUEST_SCOPE);
</jsp:scriptlet>In the navmenu view:
<f:subview>
<rich:panelBar selectedPanel="#{navBean.navigatorSectionId}">...
</f:subview>in the navBean class:
public String getNavigatorSectionId()
return this.navSectMap( (String) this.getRequestMap().get( ViewConstants.PageIdAttribute ) );
}If one has a better workaround or eventually the definitive solution ... please let me know!
Thanks so much!
Regards,
-- Anthony

How to hide the data in particular table in oracle 10g

How to hide the data in particular table in oracle 10g
i want steps

If its on Report u can always hide the column - Keyfigure or Selection - Display - Hide......y do u want to have it on the report if it is to be hided in the first place?

How to Create an Oracle BAM Server Connection?

I m following the steps at the end of this post to create the connection but at the end I m getting this message from JDev:
{Unable to write to
/C:/JDeveloper/mywork/Application1/.adf/META-INF/connections.xml
because it is a read-only. Either make it writable or allow it to be made writable through source control.}
it creates the directory C:/JDeveloper/mywork/Application1/.adf/META-INF/ with only a adf-config.xml file but NOT the connections.xml any one knows what is wrong?
Bellow is the stpes I m following. Its exactly what is written at the Oracle Fusion Middleware Developer´s guide for Oracle SOA Suite 11g Release 1(11.1.1) E10224-01
To create an Oracle BAM connection:
1. Select New from the File main menu in Oracle JDeveloper.
The New Gallery dialog opens.
2. Choose Connections from the General category.
3. Select BAM Connection in the Items list, and click OK.
The BAM Connection wizard opens.
4. Provide a name for the connection. Leave the Create Connection In selection as
Application Resources.
5. Click Next.
6. Enter the following connection information about the Oracle BAM instance.
7. Click Next.
8. Test the connection by clicking Test Connection. If the connection was successful,
the following message appears:
Passed.
9. Click Finish.
Note: You can create connections to Oracle BAM in the Oracle
JDeveloper Resource Palette as well as the Application Resources
panel of a specific application. It is recommended that you create these
connections in the Application Resources pane rather than the
Resource Palette.
Field Description
BAM Web Host Enter the name of the host on which the BAM report server and
Web server are installed. In most cases, the BAM Web host and
Oracle BAM Server host are the same.
BAM Server Host Enter the name of the host on which the Oracle BAM Server is
installed.
User Name Enter the Oracle BAM Server user name (typically bamadmin).
Password Enter the password of the user name.
HTTP Port Enter the port number or accept the default value of 8888. This is
the HTTP port for the BAM Web host.
RMI Port Enter the port number or accept the default value of 9085. The
RMI port is for the BAM report cache, which is part of the Oracle
BAM Server.
Use HTTPS Select this check box if you want to use secure HTTP (HTTPS) to
connect to the Oracle BAM Server during design time.
Otherwise, HTTP is used.
Message was edited by:
Mario.Mesquita

Ok that will be nice, but is not the case I dont want to read the tutorial, the problem is I already start to read and execute the tutorial you told me the problem is this tutorial it doesnt show how to do everything from scratch because you already have inside the zip file everything like xmls etc etc, and I want to get my DO and create the process myself, I dont want to get something that it is already done, this tutorial does not show for example how to create this composite.xml, this file it is already inside the zip file, so this way I just follow half of the process and dont learn how to make the whole process.
tks

How can I set the Corporate Logo instead of Oracle Discoverer logo in 10g

Hi,
How can I set the corporate logo/corporate welcom html file instead of oracle discoverer logo in oracle discoverer plus for olap reports version 10.1.2.48.18. while loading the d4o sessions.
Exactly what are all the steps that I need to follow .
Thanks,
Natarajan.U

Hi Lance,
Thanks for the documents. Its really helpful to me.
I am able to change the look and feel of my reports. But I am unable to change the corporate logo.
The steps that I followed.
1.Goto discoverer Plus configruation.
2.Goto Logo change the option button from None to File and Choosed the .jpg file from C:\Logos.
3.Restarted the application server.
4.Open the BI plus reports in IE. But still I am seeing the same Oracle Logo only.
5.But whatever the look and feel like plastic/system/oracle I changed I am able to see the changes.
6.The logo change is not as simple as I thought??. I need to create Jar on this logo and I need to put the jar file in java /j2ee directory???.
Thanks,
Nats

ORACLE 10g Reports- how to hide the parameter screen

QUESTION:
: I have a report that was designed in 6i. It has a parameter screen. Now I converted the report to 10g and pass parameters to the report from a form. Therefore the 6i parameter screen is not required. However, when I look into the report editor PAPER PARAMETER FORM icon, the old 6i parameter layout appears.
HOW do I stop the 6i parameter screen from appearing? I dont need it anymore since the parameters are passed in from a form.

Hi,
Do this
Go to DevSuiteHome_1\reports\conf\cgicmd.dat
this file contains theMapping file for Oracle Reports
see this link
how to hide url (use, password and db) in oracle 10g

How to hide system tables when using the Oracle SQL Developer?

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
Can anyone explain to me how to do these things?
Thanks,

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
Kuljeet

How to download logo and heading in excel sheet.

Hi ,
can any one tell me how i will download the logo in the excel sheet by using program.
Regards,
Priti shrivastava

Hope you are comfortable with inserting header in to excel sheet.
Regarding Logo see the below code snippet:-
TABLES:
sflight.
* header data................................
DATA :
header1 LIKE gxxlt_p-text VALUE 'Suresh',
header2 LIKE gxxlt_p-text VALUE 'Excel sheet'.
* Internal table for holding the SFLIGHT data
DATA BEGIN OF t_sflight OCCURS 0.
        INCLUDE STRUCTURE sflight.
DATA END   OF t_sflight.
* Internal table for holding the horizontal key.
DATA BEGIN OF t_hkey OCCURS 0.
        INCLUDE STRUCTURE gxxlt_h.
DATA END   OF t_hkey .
* Internal table for holding the vertical key.
DATA BEGIN OF t_vkey OCCURS 0.
        INCLUDE STRUCTURE gxxlt_v.
DATA END   OF t_vkey .
* Internal table for holding the online text....
DATA BEGIN OF t_online OCCURS 0.
        INCLUDE STRUCTURE gxxlt_o.
DATA END   OF t_online.
* Internal table to hold print text.............
DATA BEGIN OF t_print OCCURS 0.
        INCLUDE STRUCTURE gxxlt_p.
DATA END   OF t_print.
* Internal table to hold SEMA data..............
DATA BEGIN OF t_sema OCCURS 0.
        INCLUDE STRUCTURE gxxlt_s.
DATA END   OF t_sema.
* Retreiving data from sflight.
SELECT * FROM sflight
         INTO TABLE t_sflight.
* Text which will be displayed online is declared here....
t_online-line_no    = '1'.
t_online-info_name = 'Created by'.
t_online-info_value = 'SURESH KUMAR PARVATHANENI'.
APPEND t_online.
* Text which will be printed out..........................
t_print-hf     = 'H'.
t_print-lcr    = 'L'.
t_print-line_no = '1'.
t_print-text   = 'This is the header'.
APPEND t_print.
t_print-hf     = 'F'.
t_print-lcr    = 'C'.
t_print-line_no = '1'.
t_print-text   = 'This is the footer'.
APPEND t_print.
* Defining the vertical key columns.......
t_vkey-col_no   = '1'.
t_vkey-col_name = 'MANDT'.
APPEND t_vkey.
t_vkey-col_no   = '2'.
t_vkey-col_name = 'CARRID'.
APPEND t_vkey.
t_vkey-col_no   = '3'.
t_vkey-col_name = 'CONNID'.
APPEND t_vkey.
t_vkey-col_no   = '4'.
t_vkey-col_name = 'FLDATE'.
APPEND t_vkey.
* Header text for the data columns................
t_hkey-row_no = '1'.
t_hkey-col_no = 1.
t_hkey-col_name = 'PRICE'.
APPEND t_hkey.
t_hkey-col_no = 2.
t_hkey-col_name = 'CURRENCY'.
APPEND t_hkey.
t_hkey-col_no = 3.
t_hkey-col_name = 'PLANETYPE'.
APPEND t_hkey.
t_hkey-col_no = 4.
t_hkey-col_name = 'SEATSMAX'.
APPEND t_hkey.
t_hkey-col_no = 5.
t_hkey-col_name = 'SEATSOCC'.
APPEND t_hkey.
t_hkey-col_no = 6.
t_hkey-col_name = 'PAYMENTSUM'.
APPEND t_hkey.
* populating the SEMA data..........................
t_sema-col_no = 1.
t_sema-col_typ = 'STR'.
t_sema-col_ops = 'DFT'.
APPEND t_sema.
t_sema-col_no = 2.
APPEND t_sema.
t_sema-col_no = 3.
APPEND t_sema.
t_sema-col_no = 4.
APPEND t_sema.
t_sema-col_no = 5.
APPEND t_sema.
t_sema-col_no = 6.
APPEND t_sema.
t_sema-col_no = 7.
APPEND t_sema.
t_sema-col_no = 8.
APPEND t_sema.
t_sema-col_no = 9.
APPEND t_sema.
t_sema-col_no = 10.
t_sema-col_typ = 'NUM'.
t_sema-col_ops = 'ADD'.
APPEND t_sema.
CALL FUNCTION 'XXL_FULL_API'
EXPORTING
*   DATA_ENDING_AT          = 54
*   DATA_STARTING_AT        = 5
   filename                = 'TESTFILE'
   header_1                = header1
   header_2                = header2
   no_dialog               = 'X'
   no_start                = ' '
    n_att_cols              = 6
    n_hrz_keys              = 1
    n_vrt_keys              = 4
   sema_type               = 'X'
*   SO_TITLE                = ' '
TABLES
    data                    = t_sflight
    hkey                    = t_hkey
    online_text             = t_online
    print_text              = t_print
    sema                    = t_sema
    vkey                    = t_vkey
EXCEPTIONS
   cancelled_by_user       = 1
   data_too_big            = 2
   dim_mismatch_data       = 3
   dim_mismatch_sema       = 4
   dim_mismatch_vkey       = 5
   error_in_hkey           = 6
   error_in_sema           = 7
   file_open_error         = 8
   file_write_error        = 9
   inv_data_range          = 10
   inv_winsys              = 11
   inv_xxl                 = 12
   OTHERS                  = 13
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

How to Hide Oracle BAM logo in Header

Similar Messages

Maybe you are looking for