How to hide parent cost center code in the costing LOV
Dear Gurus,
I have a very peculiar issue. I want to hide parent cost center code that appears in the costing LOV of employee in the others tab. Can any body help me out on this one?
Regards,
Muhammad Noman Shafique
Hi,
I do not have the exact steps for form personalization as I am not good in this :-(
But regarding the costing segment (removal from all pages) you can follow below steps:-
1. Navigate to Sysadmin --> Application --> Flexfield --> Segments
2. Search for title "Cost Allocation Flexfield"
3. Now click on teh code that is attahed with your business group and then click in segments.
4. You will see all the segments defiened for the costing.
NOTE: If you want to disable one of them uncheck the "Freeze Flexfield Definition" in the "Key Flexfield Segments" window. But do remember that it will affect all your costing and you wont be able to select the disabled costing segments in any other window (Element Entries, Assignemnt, Organization, Element link and Payroll)
Thanks,
Avinash
Similar Messages
-
Adding a new Cost Center code to a 82ax Report painter
Hi experts,
I am asked about adding Cost center code to the left of a 82a Report painter(Where the Pepe element code and description is) without modifying the actual length of that colum....
Is this possible??
Thank you very much.
Artur.Ok, no reply for this
-
Cost Center code proposed by system
Hi Friends,
Is there any option that system propose sequential internal code at the time of cost center creation?
Now you are aware if you create cost center through KS01 you can put anything for cost center code. Do you don't think some control should be there like GL master creation?
Regards,
DJ.Hi
If you are usng BW - better develop the report from there... Else, ABAP is the only solution
Note that there is no correlation between Plant & Cost center except work center... Hence, Plant as an Input parameter in a cost center report is not possible.... Thats why, people prefer to have a cost center nomenclature that reflects the Plant No as well i.e. say 1st 4 chars of a Cost center name can resemble plant
br, Ajay M -
Adding cost center on OKB9 with cost element company code with valuation ar
hi ,
can anybody help me out with the Adding cost center on OKB9 with cost element company code with valuation area configuration.
i have to do this configuration but do not know the detailed steps for that one.
Good points will be awarded.Hi Prem
Select the 1 in column acct assignment details column then in the left side in detail per business area/valuation area enter your valuation area.
Thanks
Ashok -
Hi,
I am using the TS FGI0 to see the report '0SAPBLNC-01' with the opction 'object list' (I use NewGL). I modified the report (TS FGI2) copying the standard and adding the characteristic 'cost center', but the report shows only the text of the cost center, not the field 'KOSTL'. I also need to see the code of the cost center field 'KOSTL', like the division characteristic (text and code). Any idea?
Thanks,
CeciliaHi
The object list is designed as such for these reports...
If you execute in Drilldown option, Once you execute the report, Click on SETTINGS > Char Display... Choose Key & Name
However, see note Note 991753 - No description for Cost Element in New GL Drilldown, if it helps
Regards
Ajay M
Edited by: Ajay Maheshwari on Jan 6, 2011 7:19 PM -
Cost center change in the Asset master record
Hi
When ever cost center changed in the Asset master record, can it possible what ever the dep that is posted to previous cost center,that will automatically transfers to the new cost center,is there any programme for this,i can use repost functionality in controlling,some time many copst centers changes will happen in
our system,so can any tell me how to automate this.
Thanks
LilyHi,
Automatic transfer to new cost center is not possible.
You need to use Distribution or assessment to re allocate the expenses to new cost center.
Regards,
Murali
If it is useful, award points -
Table for Material-Cost center-Settlement Rule_REM product cost collecter
I want to generate a report to see for particular material which cost center and which settlement rule is available.
If we go in Product cost collecter (PCC) there we have an option to see settlement rule under header tab, I want to fetch that data for material as selection parameter, can anyone suggest how to get the data as,
Material Cost Center Settlement Rule
Thank you.
Regards,
DevenHi,
pleasefind tables related with cost.
TKA01 Controlling areas
TKA02 Controlling area assignment
KEKO Product-costing header
KEPH Cost components for cost of goods manuf.
KALO Costing objects
KANZ Sales order items - costing objects
Cost center master data
CSKS Cost Center Master Data
CSKT Cost center texts
CRCO Assignment of Work Center to Cost Center
COSP CO Object: Cost Totals for External Postings
COEP CO Object: Line Items (by Period)
. COBK CO Object: Document header
COST CO Object: Price Totals
Regards
SANIL -
Activate the FIELD Cost Center while issuing the Material to Order by 261
Dear All,
How to activate the FIELD Cost Center while issuing the material againest Order IN MB1A?
Thanks and regards,
SatyajitHi all,
I'm having problems with activating the cost center field too. I've already checked OMBW and OMJJ. For OMJJ, cost center field was required. For OMBW, Cost Center field was Supressed. However, when I checked the Change Logs, no changes were performed since last year. The user who raised this issue had the cost center field activated until December 1, 2008 but now it's deactiavted. So I don't think it's OMBW responsible for this since there was no change since last year.
Please share your knowledge on this.
Thanks! -
Charging Porposnate dep to the cost centes based on the Interval Assigned
Hi,
I have scenario were asste is being transferred from one cost center to another and depreciation needs to be charged on proposnate basis between the old and new cost center.
I have changed the interval in the aaset master (T-Code AS02) for transfer, but when I am posting depreciation system is chaging 100% dep. to new cost center irrespective of the date of changes.
Regads,
ABHi,
I tested it, made some research and found note 29947:
When posting depreciation with RABUCH00, with account assignment to cost
center, depreciation is always posted to the cost center assigned at the
end of the posting period in which depreciation is being posted.
Depreciation is not distributed for a proportionate period of time (by
date) to the time-dependent cost centers assigned in table ANLZ.
This note speaks about RABUCH00 but is is release independend and still valid.
Have you made another experience?
( Time independent organization unit is not relevant in that case)
regards
Bernhard
Edited by: Bernhard Kirchner on Nov 16, 2010 12:31 PM -
Can a cost center reassign to another cost center group
Dear Expert,
Does SAP allow a cost center reassign from one cost center group to another cost center group in this scenario the particular cost center which going to reassign to another cost center group have posting into the cost center?
Please advise how to reassign and what is the impact?
Please help
Regards,
KarenHi,
Thank you for the prompt reply.
Would like to seek for your advise.
The cost center that we need to reassign to other cost center group will it carry the cost from the previous cost center group to a new cost center group?
Please advise.
Thank you.
Regards,
KH -
Hi, folks can some body help me¡ How I can use de second code to the Itunes card to use the Itunes card.... My number is vanished, how i can submit my Itunes card?
iTunes Store: Invalid, inactive, or illegible codes
http://support.apple.com/kb/TS1292 -
Assigning the cost center directly to the person
Dear friends
We have to assign the cost center to position, and when the position is assigned to a person, he inherits the cost center from the position
But the requirement is to assign the cost center directly to the person, with out assigning to the position, can you suggest any alternate to do this
Regards
KiranHello
Maintain infotype 0027 from pa30 for the personnel number directly....
cheers -
Can 2 cost center group share same cost center?
Dear Experts,
Can 2 cost center group share the same cost center?
Basically I'm looking at MATRIX structure where one cost center, say an Equipment shared by 2 different cost center groups (say one in "Location-A" cost center group, and the other one is in "Process-A" cost center group). This is to enable the management to be able to see the costs incurred in either by "Location" cost center group or "Process" cost center group.
The "Location-A" cost center group may tied to Cost center 101, Cost Center 102 and Cost Center 103. The "Process-A" cost center group may only tied to Cost Center 101, and other cost center 201 (which is also tied to other "Location-B" cost center group).
Please advise.
regards,
AbrahamHi Abraham,
its not possible to assign a cost center to several cost center groups in the standard hierarchy. Otherwise, the standard hierarchy would be inconsistent.
As stated in the online documentation under http://help.sap.com/erp2005_ehp_05/helpdata/EN/25/908fc66d8411d194f000a0c93031df/frameset.htm
'You can assign each cost center to only one group in the standard hierarchy, but to as many alternative groups as you require.!
Regards,
Greta -
HT5731 How come I cant enter my code in the redeem box
How come I cant enter my code in the redeem box?
Maybe:
iTunes Store: Invalid, inactive, or illegible codes
Next contact iTunes
Apple - Support - iTunes - Contact Us -
How to hide ABAP report source codes like program SAPMSYST
hello guys , I only want to know how SAP hide ABAP codes, any one could told me?
BRs.
Justinhi
u can use table name D010TAB
IF J > 1.
WRITE: / 'Cannot generate appropriate program name'.
EXIT.
ENDIF.
DATA: F5(8).
EXEC SQL.
SELECT MASTER INTO :F5 FROM D010TAB WHERE MASTER = :NEW_NAME
ENDEXEC.
IF F5 IS INITIAL.
There is no such hidden program, hide it
EXEC SQL.
UPDATE D010TAB SET MASTER = :NEW_NAME WHERE MASTER = :PROGRAM
ENDEXEC.
concatenate 'Program' :program 'was hidden.'
into message separated by space.
ELSE.
There is already a hidden program there, unhide it
EXEC SQL.
UPDATE D010TAB SET MASTER = :PROGRAM WHERE MASTER = :NEW_NAME
ENDEXEC.
concatenate 'Program' :program 'was restored.'
into message separated by space.
ENDIF.
write message.
Edited by: krupa jani on Nov 9, 2009 7:30 AM
Maybe you are looking for
-
How to trigger an SMS after creation of Activity / Interaction Record
Dear Experts, Our Client requirement is to trigger an SMS immediately after creation of an Interaction Record. I want to define an Action for this. But what processing type should I use for SMS, (like Method Call, Smart Forms Mail / Fax / Print and W
-
Images overlap with text when after creating pdf: InDesign CS
Good morning, I am using bot InDesign CS and CS2, and I am having a problem as the following: After creating the pdf, images overlap with one another, or the text overlap behind the images so on. First, I would like to mention the overlapped images h
-
Using Checkboxes in a Table Component
I have a table bound to a sql-query. I added an additional checkbox-row not bounded to the sql-query. now, I would like to check, which checkboxes are checked. I used these code-snippets to do so: http://blogs.sun.com/divas/entry/using_checkboxes_in_
-
Import fail while trying to import userdefinedfields.xml
All, I am trying to import userdefinedfield.xml from dev to QA environment and import fails with below error message. [xx/07/13 11:36:44:892 EST] 00000051 SystemOut O ERROR,15 Jul 2013 11:36:44,892,[XELLERATE.DATABASE],ALTER TABLE USR MODIFY java
-
Hi all, Can anybody plz send links / document of work flow. This is little bit urgent. Thanks in advance. Regards, Dheeraj