How to hide preview in UWL ?

Hi all , we have EP 7 sp9. Can I configure the UWL to hide the preview section part in UWL ?
Current there is one list in UWL, and when choose one item, it will display the content in below preview section. Can we hide the below preview section ?

If you open the UWL iview there is a propery Display Preview, if you set this to No the preview will not be displayed

Similar Messages

How to hide preview configurator summary page when launching configurator from iStore

Hi,
We have a requirement to hide preview configuration summary page in iStore whereas it should be visible when launching from other host applications.We tried doing it with help of usage functionality as below.
1) Create a usage with some name say “iStore” in configurator.
2) Take copy of summary with Status region template and add display condition to hide the summary region.
3) Take copy of the model active ui and attach the above template to it.
4) Publish the model with this new copy UI and usage as iStore to the host application.(There will be 2 publications one with this usage and other with normal)
5) Enable the profile CZ:Publication usage at application/responsibility levels for iStore.
With the above approach users are concerned that we need to maintain 2 User Interfaces in Configurator and each time any change has to be done both the user interfaces needs to be changes which will not be a feasible option in case of complex models.We would like to know if there is any other approach to hide this summary page from istore.
We are on R12.1.3 and are using fusion configurator engine.
Any suggestions on customizations/approach will be appreciated.

Create a Dynamic Action:
When
Event: Page Load
Condition: -No Condition -
True Actions
Action: Hide
Selection Type: jQuery Selector
Affected Elements: #t20PageHeader
Condition
Condition Type: Request = Expression 1
Expression 1: CRM

How to hide buttons in UWL

Hi,
When we select one task and click on View Detail in UWL it will open another window with task details and some buttons Launch Webdynpro,Forward,Assign to Me,Open Form and links like Display details in SAP GUI.
We want to hide some of the buttons based on the task.can we acheive this by modifying xml file
Thanks
Bala Duvvuri

Hi srinivas,
Please refer to the earlier post from Sandeep:
http://help.sap.com/saphelp_nw70/helpdata/en/09/6d6b17b29b4eef83a553acaa52f668/content.htm
You need to locate the UWL iView within the relevant portal role in Content Administration. The iView
has a property to exclude certain actions from tasks. You can enter a comma delimited list of which
actions you want to switch off.
After saving the iView properties go into System Administration->Navigation and clear the portal
role cache(s), log out and back in again and the UWL should reflect the changes.

How to hide display details in sap gui and create ad-hoc request in UWL?

Hi,
how to hide display "details in sap gui" and "create ad-hoc request" in UWL?
Please telme the step-by-step procedure to hide "details in sap gui" and "create ad-hoc request".
Thanks,
Rashmi

Hi,
Thanks for the information. It was very helpfull.
Can you please tellme where can we fine UWL iView? I tried to find this out in two ways.
1) Portal Content -> Content Provided by SAP -> End User Content -> Standard Portal Users -> Views -> com.sap.coll.iviews -> Universal Worklist (finally i got this iView). Here i dint find any property called "List of UWL Actions to exclude". In the link which you had given, its written that we can modify the iView and add the name of the actions under the Actions to exclude from the UWL property.
Which iView do we need to modify and where can i find that property?
2) I downloaded the xml file and then tried to find this property "List of UWL Actions to exclude" or " Actions to exclude from the UW". But i couldnt find both the properties in xml file.
Thanks,
Rashmi

How to Hide an Unwanted Update?

how do I hide an update using technical preview 9926 I keep getting (0x80070103) error Nvidia driver update for GeForce gtx 765M. Please help me Glenn None of the above threads is an answer to the solution i'm looking for.

On Tue, 27 Jan 2015 02:40:02 +0000, how to hide an update using technical
preview 9926 wrote:
how do I hide an update using technical preview 9926 I keep getting (0x80070103) error Nvidia driver update for GeForce gtx 765M. Please help me Glenn None of the above threads is an answer to the solution i'm looking for.
I've no idea who Glenn is nor what you've tried so far, but what worked for
my Nvidia Quadro K2100M was to install the latest 8.1 driver from the
Nvidia web site. Once I had installed that, I was no longer offered the
update.
Paul Adare - FIM CM MVP

How to hide "Resfresh" button in top yellow bar of guided procedures?

Hi Folks
I would like to remove the "Refresh" button in the top yellow bar of an guided procedures workitem. You get to this yellow bar when you click on an uwl workitem which is associated with guided procedures view. Does anybody know how to hide this button?
Thanks a lot for helping!!
Kind regards
Bettina

Dear Bettina,
this will be a feature of NetWeaver CE 7.2.
Until then it simply is not possible.
There is one workaround, you can use the SingleTask view of a Process Instance, which however will show ONLY the action itself, without the Process Title, or the Ctx Panel or the Phase Navigator.
If this works for you, I can guide you how to achieve it.
Regards,
George.

How to hide the pricing conditions specified in pricing procedure of sd.

dear friends,
my situation is to hide the conditions specified in the pricing procedure. so that it is not viewed by the some users.can you please tell me how to hide the conditions. so some of the persons, who are having authorization to see the conditions , will be able to see the pricing conditions.
can you please suggest me how to do this.
regards,
g.v.shivakkumar

Authorisation issues viz. Role Impementations
Hide Condition Records Line Item & Header Wise from all the transactions QK / So / P.I. / Enquiry / Invoice etc. for specific user grps. - in CRETATE / AMEND / DISPLAY / REPORTS all
Only Display the fields
regards,
g.v.shivakkumar

How to hide some select-option of Logical Database in report?

How to hide select-option of Logical Database in report?eg . In Logical Database 'PNP' , my code is 'GET PERNR' , excute the report , select-screen is displayed . I want to hide some select-options , such as PNPPERNR-LOW .
Edited by: rongrong wang on Mar 26, 2008 9:31 AM

U need to write code in initialization as
initialization.
loop at screen.
if screen-name = 'PNPPERNR-LOW'.
screen-active = '0'.
modify screen.
endif.
if screen-name = 'PNPPERNR-HIGH'.
screen-active = '0'.
modify screen.
endif.
endloop.

How to hide dynamic parameters values in the URL with Reports 6i

Hi,
I want to know a way of hiding the parameters values when asking for a report through the web.
Now I'm using the Reports 3.0.5.8 with a Cartridge defined in the Oracle Web Application Server 3.0.1.0.1. When you ask for a report with the parameters DESTYPE = cache and DESFORMAT = pdf, it is fully generated and in the Address or Location box of the browser, you can see http://webserver/cache/report.pdf (where cache is the virtual directory defined in the OWAS in which the .pdfs are cached). So, users cant see the Url used to generate the report.
Im trying to upgrade this configuration to Reports 6i with Cgi in a web server. I generate reports with no problems. The problem I have is I cant find how to hide the parameters values as before. I mean, when I ask for a report, once its generated I can see http://webserver/cgi-bin/rwcgi60.exe?server=ServerName&report=report.rdf&userid=user/pass@connection&destype=cache&desformat=pdf&P1=value1&P2=value2 in the Location box. It allows user to ask for another report changing the values of the parameters. I use these parameters to execute some query written in the Data Model. For example, imagine that the P1 represents the company id, the user (that is supposed to see only data of its company) can change this id, ask for a new report and see data of another company.
Ive already tried to use the key mapping option, but its not useful to me because the parameters values are dynamic and its impossible to define different entries in the cgicmd.dat for each possible value. The option of loading the parameter form before running a report is not useful to me either, because there exists specific screens for this purpose.
Is there any solution?
Thank you.
Marma Bonfiglio.

Hi Rakesh,
I am using BI 7.0
The last option I have is 'Hide' for 'Calculate single values as' .
I have the below options for 'Calculate single values as'
1. Normalise according to Next group level Resul.
2. Normalize according to Overall Result
3. Rank number
4.Olympic Rank Number
5.Maximum
6. Minimum
7.Counter for all detailed values
8.Counter for all detailed values that are non zero
9.Moving average
10.Moving average That is Not zero ,null or Error
11. Hide.
So could you please tell me where i can find 'suppress result' option for the keyfigure .
Many thanks

How to hide a list from SharePoint tree view pro grammatically.

Hi,
I have enabled tree view for a SharePoint 2013 site pro grammatically.
I want hide some specific lists from that tree view like Documents, Workflow, Task List, Calender
Lists which are created default when we create a site.
How could i do that?

I know how to hide Quick launch and Enable Tree view with properties in C#.
My question is
hide some specific lists from that tree view like Documents,
Workflow, Task List, Calender
Lists which are created default when we create a site.

Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regards

You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards

How to hide only pause button on toolbar in run time

hello,
I had hide all the buttons like run, run continuous, abort vi and others by navigating to VI Properties and unchecking the corresponding options.
when i run the vi, all becomes hide except pause button and i didn't find any option for hiding it manually as well as programatically.
can any one tell me how to hide pause button. i have an urgent requirement for same.
Thanks & Regards,
Samriddh Sarbalhi
Solved!
Go to Solution.

wprice wrote:
I just found that the option called "Show Toolbar When Running" is located under VI Properties > Windows Appearance > Customize. I disabled it and it worked. Thanks!
So, the option I mentioned is still available, but only at a different place.
I was shocked on seeing your earlier reply, "There is no such option in LabVIEW 9.0 or higher.".
- Partha
LabVIEW - Wires that catch bugs!

How to hide Compounding object in report

Hi friends
We want to display region in our reports , But when I execute the query region is coming along with county (eg: US/TX , US/CA etc..) ...this is because of country is a compunding object of region...Can any body let me know how to hide country ...We just want to show TX,CA etc..
regards

Please search...this has been answered many times here.

How to hide Bottom Line in Report ?

Hi everyone,
We are working on Reports 11gr2 64-bit.
In every report, when text is completed on a page, a horizonal line (i.e. bottom line) at the end of the every page is shown and printed unnecessarily.
But creates problem in printed stationary, specially in Cheque-printing.
Kindly advise me how to hide this bottom-line, specially in printing.
Thanks.
Dev.
Edited by: ocpdev on Apr 5, 2013 6:29 PM

HI
Is these reports are developed on 11g or migrated from earlier version.
Anyhow, to test it, - create a report from scratch on 11g and run it, Also check the Footer for any Lines on it.
I hope you can identify the issue by redoing the thing for testing
Best of luck
ocpdev wrote:
Hi everyone,
We are working on Reports 11gr2 64-bit.
In every report, when text is completed on a page, a horizonal line (i.e. bottom line) at the end of the every page is shown and printed unnecessarily.
But creates problem in printed stationary, specially in Cheque-printing.
Kindly advise me how to hide this bottom-line, specially in printing.
Thanks.
Dev.
Edited by: ocpdev on Apr 5, 2013 6:29 PM

How to hide remote IP address in header for roaming users

Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
Hello everyone,
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam. What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.
Any assistance on this would be greatly appreciated. Thanks in advance.

MarketData.com wrote:
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam.How often is this occurring (messages being blocked as "spam" due to the content of an existing Received header)?
What spam software is being used that blocks these messages?
Very large organisations/ISP's use Sun Messaging Server and this is the first time I have heard of this occurring.
What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.Removing the IP address information is going to be extremely difficult. The standards are quite clear that the Received: header should include the IP address information.
RFC 2821 (SMTP), Section 4.4 Trace Information:
   When an SMTP server receives a message for delivery or further
   processing, it MUST insert trace ("time stamp" or "Received")
   information at the beginning of the message content, as discussed in
   section 4.1.1.4.
   This line MUST be structured as follows:
   - The FROM field, which MUST be supplied in an SMTP environment,
      SHOULD contain both (1) the name of the source host as presented
      in the EHLO command and (2) an address literal containing the IP
      address of the source, determined from the TCP connection.Regards,
Shane.

How to hide preview in UWL ?

Similar Messages

Maybe you are looking for