How to Hide Reassign Button for the External Users

Hi All,
We have some notifications sent to the Oustide Suppliers, In those Notifications we are haveing 3 buttons displayes (Yes/No/Reasign).
Based on the Previous posts regd the same subject, I checked the Notification Attribute '#HIDE_REASSIGN' , it was already set to 'Y'. Changed to B and tested but same result,
These users do not ahve any responsbilities except for one Supplier Responsibility.
Can you pls help me on this issue.
Regards,
Sridhar

Hi Srini,
Thanks for the Immediate Response, I reviwed the Maetalink Note which you suggested, it was stated as:
Starting from ATG_PG.H.Rollup 4, an enhancement has been made to the Notification Details screen.
When the user viewing the notification has been granted the Workflow Administrator privilege (through the WF_ADMIN_ROLE preference), then the Reassign button will always be visible, even when the message attribute #HIDE_REASSIGN is set to Y.
This allows Administrators to reassign any notification when necessary in exception cases.
But in my case, the user do not have the Workflow Administrator privilege. He was not assigned with any workflow Admin Resps. Is there anything I am missing to check the WF_ADMIN_ROLE preference for a particular user?
Regards,
Sridhar

Similar Messages

How to hide REASSIGN Button for PO Requisition Approval Notification only

Hello,
I have a requirement in which I have to HIDE the REASSIGN button from the PO Requisition Approval Notification page. I realized that this page(NotifDetailsPG.xml) is being used by Sourcing Module too for sending the Approval Notifications. So I cannot directly set the Rendered Property to False for this as this would hide the REASSIGN button in Sourcing Approval Notification too.
So, how do I hide the REASSIGN button from the Notification page only if the Page is being used as PO Requisition Approval Notification? Can I use SPEL command in this case? Can somebody help me with this issue?
Thanks
Sunny
Edited by: user13369509 on May 16, 2011 7:39 AM

Hi Srini,
Thanks for the Immediate Response, I reviwed the Maetalink Note which you suggested, it was stated as:
Starting from ATG_PG.H.Rollup 4, an enhancement has been made to the Notification Details screen.
When the user viewing the notification has been granted the Workflow Administrator privilege (through the WF_ADMIN_ROLE preference), then the Reassign button will always be visible, even when the message attribute #HIDE_REASSIGN is set to Y.
This allows Administrators to reassign any notification when necessary in exception cases.
But in my case, the user do not have the Workflow Administrator privilege. He was not assigned with any workflow Admin Resps. Is there anything I am missing to check the WF_ADMIN_ROLE preference for a particular user?
Regards,
Sridhar

How to hide an webpart for the all members who have access for the this site but visible for the restricted read users?

Hi,
Any help?
Thanks
srabon

Hi Srabon,
We can set the "Target Audience" property of web part to group maintaining restricted read users. By this, the web part will be shown to specific users only.
Please let us know if this helps.
Thanks,
M. Gubendra Raj

I have followed Apple support Article HT4527 for moving itunes but have insufficient space on my new PC for the complete library of. How can I leave music on the external HDD but associate the content on my external HDD with my pc itunes when it is open?

I have followed the Apple Support Section Article HT 4527 and have moved itunes media onto an external Hard Drive. The complete file is 103GB in size.
I have downloaded the latest itunes onto my new PC.
When I follow the article and try moving the itunes file onto the new PC, I am informed that there is insufficient space on my new PC.
In any case, like my old system, I want to leave my music on the external HDD and just have the music library displayed in itunes when I click on the "Music" folder.
How can I get itunes on the new computer to interogate my external HDD to just list the library and leave the music on the external HDD?

you can do this by keeping the external hard drive connected and doing the following
-hold shift key down on computer while opening iTunes and a prompt will appear to choose a library
-select choose library, iTunes should bring up your explorer windows where you can search for the external HD
-after you find the external HD find the iTunes folder you just copied to it
-after opening the iTunes folder look for the file that says iTunes library.itl or if you can't see that extenstion just look for a document looking thing in the iTunes folder that shows up as a database file
-double click the database file and boom iTunes should load your library without having to copy it to the computer
PS: do make sure that if you are going to do it this way, make sure that the external HD is connected at all times, because if you don't then you will get exclamation marks next to your iTunes songs
double PS: if you are unsure how to find out if the iTunes library file is a database file just right click it and choose properties and under the type it should say database file
hope this helps:)

How can I change the default program for the external applications editor?

I have read the on line directions for this and it reads "select a file type in the left pane." I do not see where this is in the left pane. All I see in the left pane is "Browser start pages" and a "How do I " Pane. Nothing with file types.

Hello,
Welcome to Adobe Forums.
In order to change the default program for the external applications editor. Please follow the steps as mentioned below.
Click on Edit menu then choose preferences.
Once the preferences dialog box open.
click on file editors.
On the Left pane you will find all the file types which you want to edit .
On the right hand side you will find the editors for that specific file type.
If you want to add any other application you need to click on + symbol at the top of right pane.
Select the path of that application which you want to apply.
clcik on open.
If you want to make it primay you can click make primary option available at the right hand top. For more detials please check the screenshot below.
Regards,
Rajeev

How can i create the blue "I"-Button for the Documentation in a view

How can i create the blue "I"-Button for the documentation in a view?
I want to prepare the button with user specified Information...
and where must be create the documentation?
thanks
Edited by: DDC-TD on Apr 24, 2008 10:22 PM

you have not mentioned where do u want the " I " information button ,
1. If u want for a report , u can get the information button on selection-screen only .
if u goto se38 on the mail screen u will find a radio button for documentaion ,
when u select it and click 'create' or 'change' , an editor will open and u can document anything there ....
2. Or specify where u want info button .
thanks ,
reward points if usefull.

I have an iMac G5 running OSX Leopard 10.5.6, how do I activate the external microphone port? In the Sound window there is no option for the external port.

I have an iMac G5 OS 10.5.6. How do I activate the external microphone port? In gen. pref. 'sound' there is no option for the external port.

Your audio settings may have been changed.
Open Audio MIDI Setup (/Applications/Utilities/), then check the Audio Output setting.
Change the Audio Output setting to 44100.0 Hz.
Quit Audio MIDI Setup.
More info here on no sound from built-in speakers:
http://support.apple.com/kb/TS1574?viewlocale=en_US
Any reason why you have not updated to the final verion of Leopard 10.5.8?

For Windows user, how to backup ipod songs to the external hard disk?

For Windows user, how to backup ipod songs to the external hard disk?
Is it only possible for mac but not Windows computer?
Thx for any help!

Hi Aston,
Thanks for visiting Apple Support Communities.
If you'd like to back up your iTunes library to an external hard drive, see this article for the steps:
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/ht1751
Best,
Jeremy

How to assign a button for attachment and send the data through browser ?

Hi friends,
How to convert to browser ?
how to assign a button for attachment and send the data through browser ?
Thanking you.
Regards
Subash.

Refer to
How to create a text box in ascreen painter?
where another user (venkateshwar reddy) has asked a very similar question...
Jonathan

How do I find a "download button" for the Flash Player 11.x?

How do I find a "download button" for the Flash Player 1.x updateon my Mac? All I find is a download tag for other products on the Adobe Flash Player 11.6.602.180" page.

You don't even need a button.
Either:
<a href="docs/mytext.pdf">My text</a>
Or:
<a href="docs/my text.pdf"><img src="images/pdf.gif"
width="34" height="20" border="0"></a>
where the image is the pdf symbol
GP01

How to hide Saved Searches in the header area of web ui

Hi All,
My Query Is how to hide Saved Searches in the header area of web ui.
For This is there any configuration or we have do through the code.
Thanks & Regards,
Venkat

Another approach:
Open view CRM_WORKAREAHDR/WorkAreaHeader and change the configuration. There is a button in the bar named "Attributes" (probably hidden under MORE).
Once in there in edit mode substitute the content of attribute "UI_COMPONENT_3". It should be
Window=CRM_ALLSEARCHES.CRM_ALLSEARCHES/LauncherWindow;horizontalAlignment=right;
put there a
Width=0px;
The other way using business role is fine as well.
cheers Carsten

How to hide 'layout button' on ALV toolbar

Hi,
I have an ALV and it has standard toolbar, now i want to hide 'Layout button' from the toolbar based on specific condition e.g when flag = 1.
How to do that.
Thanks,

If you are using the REUSE function, you can use the "EXCLUDING" parameter, and pass the FCODE for "Change Layout" to this table. This will remove the icon from the toolbar. Here is an example.
REPORT rich_0001 .
* Global ALV Data Declarations
TYPE-POOLS: slis.
* Internal Tables
DATA: BEGIN OF ialv OCCURS 0,
      test1(10) TYPE c,
      test2(10) TYPE c,
      END OF ialv.
DATA: xfc TYPE slis_fieldcat_alv.
DATA: ifc TYPE slis_t_fieldcat_alv.
DATA: iexcluding TYPE slis_t_extab.
DATA: xexcluding LIKE LINE OF iexcluding.
PARAMETERS: p_hide TYPE c DEFAULT 'X'.
START-OF-SELECTION.
REFRESH iexcluding.
* If the user wants to hide the change layout icon, then add to IEXCUDING
IF p_hide = 'X'.
    xexcluding-fcode = '&OL0'.
    APPEND xexcluding TO iexcluding.
ENDIF.
REFRESH ifc.
xfc-reptext_ddic = 'Test1'.
xfc-fieldname    = 'TEST1'.
xfc-outputlen    = '10'.
APPEND xfc TO ifc.
xfc-reptext_ddic = 'Test2'.
xfc-fieldname    = 'TEST2'.
xfc-outputlen    = '10'.
APPEND xfc TO ifc.
* Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_excluding = iexcluding
      it_fieldcat = ifc
    TABLES
      t_outtab     = ialv.
Regards,
Rich Heilman

How to hide page number in the table of content

Hi,
I'd like to know how to hide page number in the ToC. They show automatically, but at least for the headings of third ad fourth order I'd like to suppress/omit them.
Thanks for any advice!

You have in the Inpspector > Document tab > TOC > uncheck button for #'s

How to hide "Resfresh" button in top yellow bar of guided procedures?

Hi Folks
I would like to remove the "Refresh" button in the top yellow bar of an guided procedures workitem. You get to this yellow bar when you click on an uwl workitem which is associated with guided procedures view. Does anybody know how to hide this button?
Thanks a lot for helping!!
Kind regards
Bettina

Dear Bettina,
this will be a feature of NetWeaver CE 7.2.
Until then it simply is not possible.
There is one workaround, you can use the SingleTask view of a Process Instance, which however will show ONLY the action itself, without the Process Title, or the Ctx Panel or the Phase Navigator.
If this works for you, I can guide you how to achieve it.
Regards,
George.

How to hide a button...

hi,
i am using follwing code for creating a button in a jsp page
<html:submit property="action"><bean:message key = "cra.save"/></html:submit> ...Now i have two button & i want to disable /hide another button
untill the first button is clicked. when the first button is clicked i want afterthat second button should enable.
i dont able to understand how to do that in jdeveloper..can anyone please suggest me anything...its very much urgent..

Have a boolean flag in the bean.. and refer it in the disabled section of the commandButton2
<af:commandButton id="cb1" partialSubmit="true" actionListener="#{Bean.action}">
<af:commandButton id="cb2" disabled="#{Bean.value}" >
in the bean have the code as
private boolean value; //have getter and setter
public void action(ActionEvent actionEvent){
setValue(false); // call setter of value. and set false

How to Hide Reassign Button for the External Users

Similar Messages

Maybe you are looking for