How to hide slides for a presentation?

I am going to give a presentation that needs to have some slides hidden but at the same time available if i wish to use them. The idea is to have an omitted slide with the possibility of using it while i am doing the presentation. In power point you han use hidden slides by pressing "H" while the presentation is running. Anyone knows how can i do this in keynote? Thank you very much

The following is from the Keynote Help manual:
To skip one or more slides:
Select the slide(s) in the slide navigator or light table view, and then choose Slide > Skip Slide.
Control-click the slide and choose Skip Slide.
To make a skipped slide visible in a slideshow, select it and then choose Slide > Don’t Skip Slide (or Control-click the slide and choose Don’t Skip Slide).
This presumes that you are working in the editing (preview) mode. Thus, you need to decide before your presentation whether or not you wish to be able to show a "skipped" slide. I do not think you can "unskip" a slide while in the presentation mode. Maybe someone else knows ??

Similar Messages

How to select slides for exporting as QuickTime movie?

Is there a way to select only a range of slides for exporting as a QuickTime movie? I can hide the slides I don't want the movie to contain, then show them after the export, but this is very tedious. Is there a function like the "print range" when printing that will let me do this easier?
(My presentation is 100+ slides, all with animations, which I want to export as a series of short movies of 3-6 slides each.)

Probably easiest to open a new Keynote and drag the thumbnail of the slides you want in the Quicktime to the new presentation.

How to hide list for particular users in SharePoint 2010

Hello Experts,
How to hide/Show Custom list to a particular user or group in SharePoint 2010
Thanks in advance.
Thanks & Regards, Abasaheb Dubal.

All the lists in SharePoint inherits permission from its site. To hide a list from a user or a group what you can do is break permission inheritance at the particular list level.
1) Go to List and then click List Settings from the Ribbon.
2) Under permissions and management click Permissions for this list
3) Click Stop Inheriting Permission from the Ribbon
4) Remove User or Group that you do not want to share that list with.
Amit

Hide slide switcher when presenting?

How can I hide the slide switcher. Using an iMac for presentation with only mirroring possible. I want to be able to type <12> <enter> and goto slide 12 without everyone in the building seeing the slide switcher pop up. CEO like the "look" but asked to loose the "pop up thing" while presenting.
Almost cool :'(

Welcome to the forums!
As far as I know, there is no way to keep the slide switcher hidden. If you regularly jump to set of specific slides, you can use hidden hyperlinks to jump to them and jump back, but that is not a general solution.

Default HTML Gallery: How to make Slider for 'thumb.width' & apply output sharpening on thumbnails

Hi,
I am in the process of teaching myself the LRWebengine by modifing the file 'galleryInfo.lrweb' which is default HTML Gallery.
I am intensively reading and using SDK 3.0.
Not sure whether I am asking in the right forum but give it a try anyway.
What I'd like to achive is to have a slider allowing to change the width of the thumbnails in the section for Grid Pages and later to apply output sharpening on thumbnails.
Currently the size for the thumbnails width & height is set to 130px (["photoSizes.thumb.height"] = 130)
There is no problem to change the size for all thumbnails manually by changing this and its associated values at lines 96, 110, 114, 134, 138 in galleryInfo.lrweb.
What I'd like to find out is the following:
- how to properly include a slider row in the section for 'Grid pages' (presumably right after line 358)
- how to create a variable (eg. $sliderThumbWidth) from the selected slider-value
- so that this variable can be used to replace the current preset values at lines (96, 110, 114, 134, 138)
- later and in addition, apply sharpening 'high' (level=3) on output for thumbnails
First I thought I'd be able to figure it out by myself, but after two days of fiddling it seems that I can't. I am stuck with the creation of the variable '$sliderThumbWidth' and assume that the new 'slider_row' is not coded properly.
Hope someone can give me hints and will help me out on this.
Thanks for your attention.

... have a slider allowing to change the width of the thumbnails in the section for Grid Pages ...
Got this one worked out alright. Yeah, thumbs can now be dynamically adjusted in the WEB-UI.
Remains the problem to find out how to apply output sharpening on thumbnails.
Has someone ideas how to achieve this?
Thanks for replies.
Message was edited by: snahphoto

How to hide OpenOffice for PDF Converter

Hi ALL,
I am using OpenOffice.org for converting .doc, .xls, .ppt etc formats to PDF formats using OpenOffice QuickStarter as background process. All the documents are converted successfully but every time this QuickStarter opens-up and clearly seen as process running in. But We want this listener runs hiddenly as backgroud process.
So is there any changes requires in configuration to hide Quickstarter Listener?
Please let me know as quickly as possible.
Thanks in advance
Regards,
Vishal Shah

Hi,
try
soffice "-accept=socket,host=localhost,port=8100;urp;StarOffice.ServiceManager" -nologo -headless -nofirststartwizard
with the appropiate parameters for your installation (port, host, etc...)
Regards,

How to hide headers for specified columns in ALV?

Hallo guyes,
is it possible to hide headers just for a few columns in ALV?
Something like no_headers but just for defined columns...
Is it also possible to define column description in two lines?
Thanks.

Hi,
Check the below code
codeFORM prep_fieldcat_xls USING lt_fieldcat_xls TYPE slis_t_fieldcat_alv.
RANGES: lra_fieldname FOR field_ran.
DATA: lwa_fieldcat_xls TYPE slis_fieldcat_alv.
Build range for all unwanted columns:
lra_fieldname-option = 'EQ'.
lra_fieldname-sign = 'I'.
lra_fieldname-low = 'EEP'.
APPEND lra_fieldname.
Remove the unwanted columns from the fieldcatalog:
lt_fieldcat_xls] = lt_fieldcat[.
LOOP AT lt_fieldcat_xls INTO lwa_fieldcat_xls
if lwa_fieldcat_xls-fieldname = lra_fieldname-low. "Change here as it is
lwa_fieldcat_xls-no_out = 'X'.
endf.
MODIFY lt_fieldcat_xls FROM lwa_fieldcat_xls INDEX sy-tabix.
ENDLOOP.[/code]
Regards,
Raj.

I need XI introduction slides for presentation~Where I can get it?

Dear XI consultant:
I need XI introduction slides for presentation~Where I can get it?
I try to make a XI presentation slides for our customer~
Does SAP provide a formal slides for XI presentation?
It's better there is an case example in it.
Coz I'm a beginner of XI.thanks for your help~
Regards
Jack Lee

Hi Jack
Latest version is PI 7.1
This is overview document
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0ed3b8c-698c-2a10-fbaf-b1df0c82fc8a
Thanks
Gaurav

How to hide remote IP address in header for roaming users

Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
Hello everyone,
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam. What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.
Any assistance on this would be greatly appreciated. Thanks in advance.

MarketData.com wrote:
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam.How often is this occurring (messages being blocked as "spam" due to the content of an existing Received header)?
What spam software is being used that blocks these messages?
Very large organisations/ISP's use Sun Messaging Server and this is the first time I have heard of this occurring.
What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.Removing the IP address information is going to be extremely difficult. The standards are quite clear that the Received: header should include the IP address information.
RFC 2821 (SMTP), Section 4.4 Trace Information:
   When an SMTP server receives a message for delivery or further
   processing, it MUST insert trace ("time stamp" or "Received")
   information at the beginning of the message content, as discussed in
   section 4.1.1.4.
   This line MUST be structured as follows:
   - The FROM field, which MUST be supplied in an SMTP environment,
      SHOULD contain both (1) the name of the source host as presented
      in the EHLO command and (2) an address literal containing the IP
      address of the source, determined from the TCP connection.Regards,
Shane.

How do I convert a powerpoint presentation saved as pdf to an editable word document minus all the frames around the slides?

How do I convert a powerpoint presentation saved as pdf to an editable word document minus all the frames around the slides?

Hi Sara!
Yes this sounds interesting. Can I update to that from the PDF Export I have just renewed? How much would that cost?
Thanks for your quick answer.
Best Regards
Per-Olof Egli Logga Egli C.I.S
Managing Director
Egli C.I.S. Consulting
Lapphundsgränd 43
SE-128 62 SKÖNDAL
Sweden/Швеция
Phone: +46 708 23 03 53
<http://www.eglicisconsulting.se/> www.eglicisconsulting.se
<mailto:[email protected]> [email protected]
Skype: eglipo
Från: Sara.Forsberg
Skickat: den 10 september 2014 22:11
Till: P-o Egli
Ämne: How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
created by Sara.Forsberg <https://forums.adobe.com/people/Sara.Forsberg> n Adobe ExportPDF - View the full discussion <https://forums.adobe.com/message/6718870#6718870>

Converting Slide Size for Whole Presentation 06 - 08

My iWork 06 presentations are all 800x600 resolution. How do I convert a whole presentation into an iWork 08 widescreen (any other resolution) size?
I have opened a new presentation in Widescreen and cut and pasted all 800x600 slides from an 06 presentation; some of the slides adjust properly, some the dimensions get distorted and I have to readjust the whole slide. Any ideas?

1) Resolutions are globally set for each document. When you copy from one Keynote document to another, Keynote will automatically alter the new destination slide to the destination document resolution setting if they were not the same resolution to begin with.
2) Also, there is a grouping bug in '08 which may move objects randomly. This might be part of what you are seeing.
Check the Keynote manual pp 169-170.

How do you change the pink highlight for the present day in calendar when in week view

How do you change the pink highlight for the present day in calendar when in week view - OSX Maverick

the current day was light blue in ical in 10.6 but with plenty of contrast, but I recently made the bigger leap all the way to calendar in 10.9. the choice of color is terrible for reasons such as Spile1962 puts below, but also not having any way to tweak it is terrible. I'm on a bran d new imac and can barely see a difference and frankly, while I appreciate the subtlety, I still forget to look for the darker bar across the top of the current week and day. we should be able to adjust weekend and current day bg colors.
I went into the app's package contents in hopes that they were using a tiff/png file that I could tweak on my own but couldn't find anything for them. all the icons are there, as are the bg sets for all the little pop-ups and things, but I couldn't even find a reference to a hex color in the plist file.
send apple feedback. I just did myself, except that Calendar hasn't made the list (yet?), only iCal up to version 4.x, and Messages is still only iChat for feedback, and some others are old as well. apparently after steve died, apple's attention to these details just died with him. it's been that long since those other apps should have been relevant on their site.

How to hide fields in Infotype 16 for Molga 28

Hi Guys,
I need to hide some fields for IT0016 for Molga 28. Earlier we have assigned different screen for this molga .But now we have assigned the standard screen to IT0016 i.e. View-3211. But when i go to node Change Screen Modifications, i m unable to find MP321100. I have checked through PA30 for chinese employee the Program is MP321100 and screen is 2000.
COuld you guide how to hide some of the fields for Chinese Molga 28 in IT0016.
Regards,
Navneet

Hi Harish,
I havent got the chance to check with BASIS yet....they are lil busy .....meanwhile i have created an entry in t588m with Module pool mp321100 and feature p0016. As u told i have created entry with Molga 28 and return key 28 in P0016 feature.
Could you confirm that i need to Create mP321100 or i could have done it via mp001600 as told by other guy.
And now if i go the fields are hidden except for two fields which strangely are coming "ER Notice Period" and
"EE Notice Period". I have hidden all fields still these two fields are cming any idea why?
Regards,
Navneet

How to hide the view latest instance option for the reports in XIR3

Created an access level and denied the rights "view document instances" and "view document instances that the user owns" in the access level.
Applied this access level for a particular group on a particular folder.
Login to Infoview and when view the history,there are no instances for a particular report under that folder.
But we could still see the 'View Latest instance' option in the properties of the report and when click on it,we are able to view the report.
As per the security assigned,the user should only be able to view the instances owned by him.
Plz help me how to hide the option in INFOVIEW

In 9.3.1 (not sure about 9.2) there is a table in your BIPlus repository which stores preferences/profile information, however, having a user simply log in to WA doesn't appear to automatically create a row for them in this table. (So this may not be a viable solution to your situation, I'm still looking for one myself.) This table stores lots of preference info such as whether or not to show the Main Menu, Toolbar, Masthead, etc. by default.
To hide the View Pane, edit the data in the SHOW_INFO_PANEL column, change it from a 1 to a 0 and for that user the View Pane will not longer appear by default.
HYA_USER_PREFS
But again, this only works if you already see the user in the table otherwise I guess maybe they have to 'touch' their Preference before it creates an entry in that table. Haven't figured that part out yet, and Support didn't have any information.
If anyone has found a way to maneuver through the table structures I'd love to hear any insight you can offer.
Before you make any changes to the data in this table be sure to take adequate repository backups, and use caution as usual.
I'm going to create a Shared Preference and have each user point to it the first time they log in - but then you lose the ability for each user to have their own personal folder as their default, so it's still not the ideal solution. Really wish there was a way for Admins to set certain prefs. A coworker reminded me under 7.? or 6.x things like View Pane were system-level settings which was easy to control, but now it's at the user level.
Good luck,
Karen

How to hide edit link for some rows in report? (according to value of col)

Helo,
How to hide edit link for some rows in report? (according to value of column)
regards
siyavuş

Hi siyavuş
You can do this by taking the edit link off the report and putting it into your report SQL.
Use something like Select CASE WHEN (condition) THEN
'Put your edit link in here as an html Anchor like<a href="(target)">Edit</a>'
ELSE
tt.value
END edit_link
FROM test_table tthope it helps,
Gus..
You can reward this reply (and those of other helpers) by marking it as either Helpful or Correct.
This allows forum users to quickly find the correct answer.
;-)

How to hide slides for a presentation?

Similar Messages

Maybe you are looking for