How to Hide SSID's on Windows 8?
hello
i wanna hide SSID of USB NIC wireless router on winndows 8.
more description:
i create a wireless router on my windows 8 by USB wireless adapter
and i want to hide the SSID of this wireless connection.
It is not entirely clear to me what you are trying to configure.
in general 'hiding the SSID' of a wireless network is configuring the access point to not broadcast it's name, so it remains hidden for most users.
If you are using the builtin 'Hosted network' functionality to turn you windows pc in a virtual access point, you cannot configure these kind of details.
if you are using a third party software to do this, you shoyuld refer to the software manual/vendor or developer.
If you are using a hardware access point, refer to the documentation/vendor for assistance.
MCP/MCSA/MCTS/MCITP
Similar Messages
-
How to hide a drive in Windows 7, Service Pack 1
Could someone please tell me how to hide a partitioned drive (example my drive E:/) so that my kids cannot access it on their separate, non administrative account?
How to hide a partition in Windows?
Right-Click on My Computer [Computer in Windows Vista and Windows 7]
Click on Manage
From the list of options Click on Disk Management that will be located in the left-bottom section
All your hard disk and its partitions will be show in the right hand side
Right-Click on the partition that you want to hide and select "Change Drive Letters and Path"
Click on "Remove" and click "Yes"
Your drive will now be hidden in my computer
To unhide the drive :
Go to Disk Management Right-Click on the hidden partition [there will not be a drive letter on the hidden drive] again select "Change Drive Letters and Path"
Click on add and select an appropriate drive letter.
Click Ok
Now the drive is unhided.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
How to hide the report progress window
hii all
i am running a report using a run_product builtin from a form but i want to hide the report progress window
how can i do that
thanksAyman,
the only way to do this is to run teh Reports in asynchronous mode which will have it running as a background job.
frank -
How to hide report background engine window
hi
i m using reports6i and when i run a report thorugh forms,reports background engine window also invoke and i want to hide that winodw .any one know how to hide report background engine or is this possibl. if so plz let me how to apply this.
thnx in advanceHi,
call report using this code
begin
srw.run_report('report='||path_forms('R')||'SUB_LEDGER_BALANCE.rep
L=' || :control
|| ' cdate=' || to_char(:cdate));
EXCEPTION
when srw.run_report_failure then
srw.message(30, 'Error runing reports.');
raise srw.program_abort;
end;
if u use this code for calling report then report background engine window not open also u can open multipul report in same time
Rizwan Shafiq
www.rizwanshafiq.blogspot.com -
How to hide save changes alert window when no changes made to the form
hi,
in my form when i close the form without making any changes it displays do you want to save the changes alert.how to hide this alert when no changes are made to the form window.
regards
YesukannanBe advised that this solution will also exit the form without saving the changes and asking anything if the user did make changes.
You're probably changing some field from a PL/SQL trigger (hint: post-query or when-new-record-instance are likely). If you set the value of a field from a trigger or program unit that also marks the record as changed for Forms. Forms will then ask to save the changes when exiting the form.
If you want to prevent this, reset the record status after you change the field in the PL/SQL code. -
Hi there.
I need to hide SSID from broadcast from Cisco Prime.
I can do this easily on WLC by un-checking 'broadcast' under SSID on WLC but I have controller which I only have access through Cisco Prime.
So I would like to find out how I can disable broadcast on Cisco Prime please.
Thanks in advanceRefer : creating / adding templates
http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-3/configuration/guide/pi_13_cg/temp.html#20699 -
How to hide a cmd.exe window while my app run
When i start my application whit .BAT, console window show's too.
How can i hide this console window?I would say use a native installer if possible. Install4J is a very reasonable price, $400 or something and works on windows, mac osx and solaris/linux, provides native launchers on all platforms and can do quite a bit more than that. Very small price to pay if you are working with commercial apps or have a little money to spare and want your apps looking good.
VAInstall I think is a free opensource that does alright, a bit more complex to use, but works. I think it has an .exe launcher on windows. -
Quicktime Player - how to hide the transport mini window ?
some of my animations are titles- when I double click them the FF/Play/RW controls mini window obscures a large amount of the window
I dont wish to have to maximize the playing animation
Is there now way to simply hide the the controls ?
I know it will disappear after a few seconds but I dont want it to show at the start of play....
I can simply use the spacebar on my keyboard to stop and start ....this is not currently possible. the best you can do is reduce the time delay before the controls fade out. to do that quit QT player and run the following terminal command
defaults write com.apple.QuickTimePlayerX MGUIVisibilityTimeout 1
this will shorten the fade out delay to 1 second. also, the following command will make them never appear after you start playing the movie and they disappear the first time.
defaults write com.apple.QuickTimePlayerX MGUIVisibilityNeverAutoshow 1 -
Forms 10g : How to hide the parent MDI window.
Hi All ,
We have migrated an forms sdi application into forms 10g.
Now in the new application , we see a parent MDI appearing as a background to the SDI windows which is smaller in size ( as per the settings ).
Wanted to know if there is any solution to hide this parent Window(MDI) as the user wants a similar look and feel as his current application.
Any help is really appreciated .
thank you all.Dear Friend,
If u r using SeparateFrame = true, then you cannot minimize forms MDI window, because this is the form on which your sdi form is based. It is better if you display your forms inside the main browser by setting SeparateFrame = false. It will look better as a new Internet explorer window will not be visible, which is true for SeparateFrame = true parameter.
Regards,
Manish
India -
HOW TO HIDE MDI WINDOW INFORMS 9I WHEN THEY RUN IN WEB BROWSER
Hi. Will any body tell me how to hide the default MDI window title in Forms 9i when it run in Web Browser. I am using the "Look and feel" property as "Generic" in Formsweb.cfg file. I tried the RESIZE,POSITION,MINIMIZE,VISIBLE FALSE properties of SET_WINDOW_PROPERTY FUNCTION, But the horizontal Bar at the top displaying "Window" on it, is displayed. OR some time form is not displayed at all. So plz help me. This kindness of any one will be appriciated.
Regards
Inayat QaziHi Inayat,
To remove the ORACLE icon, change the line "logo=" to "logo=x" in file formsweb.cfg.
I am not sure if it is possible to remove the standard-menu (horizontal bar with word Window, as you describe it), because as far as I know it is inheritance for the Windows OS. In other words, removing the standard menu can only be achieved if you run on another OS.
Kind regards. -
Hi,
just got a new Hub 3 but as I've got some legacy devices that connect wirelessly but can only use WEP I've had to switch from WPA2 to WEP and wish to hide my SSID. I found this post....
http://community.bt.com/t5/BB-Speed-Connection-Issues/how-to-hide-ssid-on-the-new-hub-3-0/m-p/217965...
which implies that hiding SSID is not available on Hub 3.
soooo I just want to confirm that this "useful security precaution" is no longer available at all with Hub 3 (as opposed to is not available with Hub 3 configured for WPA2).
Thanks.Is it possible to update the drivers or firmware for these devices?
You could simply add a separate wireless access point for these devices, that uses MAC filtering and can hide the SSID.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
How to hide a window in smartforms
Hi experts,
How to hide a window in smartforms depends on the conditions. The condition is the window how a hard coded values + fields. if the condition satisfies i want to display in form if its fails no need to display in the form... plz, its urgent.
Regards.
Gowrisankarhi,
inside the window, you can create a condition.
right click on the window, CREATE>FLOWLOGIC>ALTERNATIVE.
you can give your condition there
thx
pavan -
How to hide items on Windows 8 File Explorer Ribbon
Scenario
This article describes how to hide items on the file explorer ribbon in Windows 8 and Windows 8.1.
Method
We can implement it via customizing the permission of the related registry keys.
Note: Before you make changes to a registry key or subkey, we recommend that you export, or make a backup copy, of the key or subkey.
Before you make changes to a registry key or subkey, we recommend that you
export, or make a backup copy, of the key or subkey.
Step 1:
Open
Registry Editor and locate to following registry key under which you can find the corresponding keys of the items on the File Explorer Ribbon.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\CommandStore\shell\
In the following figure, it shows the Add a network location item on the file explorer ribbon, and the corresponding
registry key in Registry Editor.
Step 2:
Take ownership of the registry key
Note: You can take ownership
of a registry key if you are logged on as an administrator or if you have been specifically assigned the permission to take ownership of the registry key by the current owner.
Right-click on the registry key which you want to take ownership of,
and then select
Permissions... option.
Click on
Advanced button to grant special permissions in the key.
At the top to the right of the current
Owner, click on the Change link.
Enter
Administrator in the Enter the object name to select
box, and then click on Check Names.
Click on
OK twice to apply.
Step 3:
Change the permission of the registry key.
On
Permissions for the key name display dialog, click
Administrators in the Group or user names window, and then select the
Allow check box for
Full Control
option.
Click
Users in the Group or user names window, and then select the
Deny
check box for
Full Control
option.
Step 4:
Click on
Apply and OK to save the changes and the following figure shows the modified permissions and owner.
Step 5:
When you open File Explorer, the item you would like to hide disappears. For your information, the following is an example:
Item: Add a network location
Corresponding Registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\CommandStore\shell\Windows.AddNetworkLocation
For advanced users
You can also deploy script with Set-Acl which is a PowerShell command to take ownership and change permissions
of the keys. For your information, please refer to the following articles to learn more about this command:
Set-Aclhttp://technet.microsoft.com/en-us/library/hh849810.aspx
SET-ACL on registry key
http://blogs.technet.com/b/brad_rutkowski/archive/2008/09/29/set-acl-on-registry-key.aspx
Apply to
Windows 8
Windows 8.1
Welcome to your feedbacks.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.The reason they gave was it is possible for the file to stay open when done with the file. (not properly closing) As the driver would be accessing the file to retrieve the thumbnail.
The thing is a driver is nothing more than a program it self. Therefore it is capable of opening and closing a file and placing the thumbnail into the database for that folder. It then would be capable to verify if the thumbnail exists in that database. Since the driver only has to run when explorer is open in that folder's view, it really is not running that often.
The catch I can see it when both Illustrator and explorer are running at the same time. Which one should close the file? The solution would be a small app that verifies that both programs are running and has control of clean up when both have closed. The driver and Illustrator could also in theory check and see if the other is running, if it is do nothing if not then close the file.
So it really boils down to having the driver and Illustrator talking to each other. -
How to hide Jump list's Tasks in Windows 7 using userChrome.css
How to hide Jump list's Tasks in Windows 7 using userChrome.css
Try to disable some browser.taskbar.*enable prefs on the about:config page.
* http://kb.mozillazine.org/about%3Aconfig -
How-to hide the portal file shares on Windows
Hi,
Does anybody know how to hide the default file shares created by SAP NW 04 in windows?
In other words: what I'm trying to accomplish is renaming the sapmnt share and saploc share (both on the E:\usr\sap\ folder) to sapmnt$ and saploc$.
I know how to do the Windows part, but where and how do I configure the SAP Web AS part?
Regards,
Steven DijkmanHi guys,
Thanks for all the feedback. However, this still does not fully work.
I tried hiding the folder but it in fact only hides the folder, not the share itself. I'm trying to do the opposite, hiding the share (making it an administrative one) whilst not hiding the folder. With the folder hidden, the startup framework (NW 04 EP6 SP12) does not work.
By the way: checking / tightening access is not an option: security architects dictate what needs to happen here and unless I have VERY good reasons I should comply to what they say: change saploc to saploc$ and change sapmnt to sapmnt$.
If anybody has anymore thoughts, I'd be very interested.
Cheers,
Steven Dijkman
Maybe you are looking for
-
Hello, I have a 1.83Ghz Core 2 Duo Mini that will not output any video over DVI. I have connected the Mini via DVI to three known-good monitors (Apple 20in Cinema Display, Gateway 22in HD LCD, and an Acer 22in LCD) and can't get any video output. I g
-
Formatting a new hard drive for mac
Hi, In a previous post I asked about running Snow Leopard on my mac after a hard drive fail. I'm having issues with formatting a new hard drie in my mac. I have a 2007 black macbook and I'm trying to run a 160gb SATA seagate hard drive. After replaci
-
Transfer old blackberry device data to new BlackBerry 10 device, without old blackberry device
Hello, I recently bought a new BlackBerry Q10, I had a BlackBerry Bold 9790 running on OS 7 before this and I had backed it up from BlackBerry Desktop Software. I had no knowledge that BlackBerry 10 devices don't work with BlackBerry Desktop Software
-
IPhoto Library in a mess....how to organize?
Hi, I have been putting this off for a couple of years, time to deal with the mess. I have the latest iPhoto 6.0.2, what I need to do is clean out all the doubles, triples and misfiled photos. I have "Modified" "Originals" and I believe they are misf
-
Help: FORMS SERVER cannot connect to database (forms patch9)
Hi: I've installed oracle 9i database and oracle 9ias 1.0.2.2.2a. I configured FormsServlet and it's working very well as i suceed my test in http://machina.domain/servlet/oracle.forms.servlet.ListenerServlet! The problem is that i cannot connect to