How to hide subscreen in module pool
hello expert.
i created one Box, and inside box i created one subscreen in Module pool ->layout.and two radio button out side of the Box.
if i select 2nd radio button , want to hide subscreen.
how to hide subscreen. could you please send me the solution asap , it's urgent.
i written below code but not working.
LOOP AT SCREEN.
IF rad2 Eq 'X'
IF SCREEN-NAME = 'SUB1' .
SCREEN-INPUT = 0.
SCREEN-INVISIBLE = 1.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
Regards
srinivas
example:
BOX1
MATNR [ ] (Normal screen)
BOX2
BOM [ BOM-OW] TO [BOM-HIGH] (subscreen)
BOX3
radio buttons
push button
selection screnn etc..
if i selection 2nd radio button i will get.
BOX1
MATNR [ ] (Normal screen)
BOX2
empty
BOX3
radio buttons
push button
selection screnn etc..
my requirement is:
BOX1
MATNR [ ] (Normal screen)
BOX3
radio buttons
push button
selection screnn etc..
Similar Messages
-
How to hide PUSHBUTTON on Module pool .
Hi Experts,
In my module pool program has 2 pushbuttons, in some cases both of those are been needed to hide in the screen. How can i achieve this?
Anybody can help me to resolve this problem?
Thanks in advance..
Regards,
RanjithHi Ranjith,
Try this code in the PBO of the Screen.
IF "CONDITION".
LOOP AT SCREEN.
IF screen-group1 = 'IV0'. " Give the Group name"
screen-invisible = '1'. "Set the Screen element as Invisible".
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF. -
Conditional call to a subscreen in module pool program.
Hi,
Could anybody please let me know how i will be able to call a subscreen conditionally in a module pool program?
Example: I have to call a subscreen XXXX if a FLAG = X. How will I achieve this?
I tried to write the below code in PAI
if flag = 'X'.
call subscreen XXXX.
endif.
This produced an error.
Regards,
SmitheshHi
In TOP Include
data repid type sy-repid,
dynnr type sy-dynnr.
In PBO of main screen
module status_100. " First Call This Module to provide the SubScreen Number to below Code
call subscreen sub including repid dynnr. " This serves the purpose of calling subscreen based on condition
in Program.
module status_100.
repid = sy-repid.
if your_condition = 'X'. " This also can be implemented in any PAI logi as its purpose is just to pass a value to DYNNR
dynnr = '200'. " The SUB Screen Number you want to pass
else.
dynnr = '300'. " Dummy Sub Screen Screen or any other (Make Sure these are of SUB SCREEN type )
endif.
endmodule
Cheerz
Ram -
Selection screen as subscreen in module pool main screen
hello
i having problem with a module pool and a selection screen subscreen , i have my main screen 100 in my module pool
i create a sub screen area , then in my top include i define a seleccion screen as subscreen 150
i define some paramets and select-options ( for the select-options feature is because i choose use the subscreen )
so far here is OK , the problem is when i fill the subscreen data and press a pushbutton define in the main screen ( 100 )
the field are getting cleared ( BTW i call the subscreen in the PBO of the main screen ( 100 ) using call SUBSCREEN SUB_AREA INCLUDING SY-REPID '150'. ) so my question is how i can do for save the data filled in the subscreen ?
thanksi find the solution of my own question:
in the first line of the PAI event of the main screen ( where you call the subscreen ) need add 'call subscreen SUB_AREA_NAME_HERE. -
Select-option on subscreen for Module pool
Hi all,
I need to add some elements on standard screen of a standard transaction. Everything works fine, but the problem starts when I want to add select-option. It is displayed, but when I press on Multiple selection button no action occurs, no window appears...I simplified the case and created test program with test screen and also I get the same behaviour. Anyone had similiar problem?
Thnak you in advance for help,
AnnaI donot know how u have created the select-option. but u can try these 2 methods to create it. And I have checked that both of them work fine.
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Regards,
Joy. -
How to include DMS in module pool?
hello,
i want to incorporate DMS[]Document data] in my module pool program, the same is there in MM03 transaction(document data).How can we do this?
below is the syntax tht i have used.
PROCESS BEFORE OUTPUT.
*&SPWIZARD: PBO FLOW LOGIC FOR TABSTRIP 'TAB'
MODULE TAB_ACTIVE_TAB_SET.
break-point.
CALL SUBSCREEN:
1002_SCA INCLUDING G_TAB-PROG '1002',
1002_SCA INCLUDING SAPLCV140 '0204',
1003_SCA INCLUDING G_TAB-PROG '1003'.
MODULE STATUS_1001.
tab-activetab = 'TAB1'.
DYNNR = '0204'.
MODULE TAB_ACTIVE_TAB_SET.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABSTRIP 'TAB'
CALL SUBSCREEN:
1002_SCA,
*CALL SUBSCREEN TABFRA1.
1003_SCA.
MODULE TAB_ACTIVE_TAB_GET.
MODULE USER_COMMAND_1001.
in MODULE TAB_ACTIVE_TAB_SET
MODULE TAB_ACTIVE_TAB_SET OUTPUT.
break-point.
TAB-ACTIVETAB = G_TAB-PRESSED_TAB.
CASE G_TAB-PRESSED_TAB.
WHEN C_TAB-TAB1.
G_TAB-SUBSCREEN = '1002'.
CALL subscreen 1002_SCA INCLUDING SAPLCV140 '0204'.
WHEN C_TAB-TAB2.
G_TAB-SUBSCREEN = '1003'.
WHEN OTHERS.
*&SPWIZARD: DO NOTHING
ENDCASE.
ENDMODULE.I think that the best way is to call directly class/function or form present in standard cvxxn transaction.
For example, take a look to d100_display_document form in include LCV110F19 (see also d100_consume_events in LCV110F19)
For example, function for displaying document is CV110_DOC_DISPLAY -
Getting error while calling a subscreen in module pool program
HI ALL,
ACTUALLY I'M GETTING A SYNTAX ERROR WHILE I'M CALLING A SUBSCREEN
IN A MODULE POOL PROGRAM IN PAI MODULE
THE ERROR IS AS FOLLOW
"." or "ID ... FIELD ..." expected after "SUBSCREEN"
CAN ANYBODY PLS HELP ME.
REGARDS
ANDREWSHI MAX ,
THE CODE IS AS FOLLOWS:
*& Report ZTABSTRIP_PS
REPORT ZTABSTRIP_PS.
type-pools : vrm.
DATA:number1 type I,
number2 type I,
result type I,
ok_code like SY-UCOMM,
employee1 type c,
ABAP(19) type c,
SALES(19) type c,
HR(19) type c,
MM(19) type c,
employee type c.
emp type c.
CONTROLS tabstrip TYPE TABSTRIP.
CALL SCREEN 100.
call screen 110.
call screen 130.
call screen 120.
call screen 140.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
CASE OK_CODE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
when 'TAB1'.
tabstrip-activetab = 'TAB1'.
when 'TAB2'.
tabstrip-activetab = 'TAB2'.
result = number1 + number2.
when 'TAB3'.
tabstrip-activetab = 'TAB3'.
SET TITLEBAR 'TITLE1'.
when 'TAB4'.
tabstrip-activetab = 'TAB4'.
if employee = 'NEERAJ'.
ABAP = 'NEERAJ'.
elseif employee = 'UMESH'.
SALES = 'UMESH'.
ELSEIF employee = 'RAM'.
HR = 'RAM'.
elseif employee = 'ANIL'.
MM = 'ANIL'.
endif.
employee = employee.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
ENDCASE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program .
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0110 OUTPUT
text
**MODULE STATUS_0110 OUTPUT.
SET PF-STATUS 'STATUS1'.
SET TITLEBAR 'xxx'.
**case ok_code.
**WHEN 'back' or 'exit' or 'delete'.
leave PROGRAM.
WHEN 'save'.
MESSAGE 'please choose a valid function ' TYPE 'W'.
ENDCASE.
**ENDMODULE. " STATUS_0110 OUTPUT
*& Module USER_COMMAND_0110 INPUT
text
MODULE USER_COMMAND_0110 INPUT.
number1 = number1.
number2 = number2.
CLEAR NUMBER1.
CLEAR NUMBER2.
REFRESH NUMBER1.
REFRESH NUMBER2.
ENDMODULE. " USER_COMMAND_0110 INPUT
*& Module STATUS_0130 OUTPUT
text
MODULE STATUS_0130 OUTPUT.
SET PF-STATUS 'STATUS2'.
SET TITLEBAR 'xxx'.
RESULT = number1 + number2.
*CLEAR RESULT.
REFRESH RESULT.
ENDMODULE. " STATUS_0130 OUTPUT
*& Module STATUS_0120 OUTPUT
text
MODULE STATUS_0120 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list.
l_value-key = '1'.
l_value-text = 'ANIL'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '2'.
l_value-text = 'RAM'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '3'.
l_value-text = 'NEERAJ'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '4'.
l_value-text = 'UMESH'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_name = 'employee'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
ID = l_name
VALUES = li_list
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR li_list.
ENDMODULE. " STATUS_0120 OUTPUT
*& Module USER_COMMAND_0120 INPUT
text
MODULE USER_COMMAND_0120 INPUT.
INCLUDING sy-repid '140'.
employee1 = employee.
IF employee1 CS 'NEERAJ'.
call SUBSCREEN sub4 .
ABAP = 'NEERAJ'.
CLEAR ABAP.
ELSEIF employee1 CS 'UMESH'.
call SUBSCREEN sub4 .
SALES = 'UMESH'.
CLEAR SALES.
elseif employee1 CS 'RAM'.
call SUBSCREEN sub4 .
HR = 'RAM'.
CLEAR HR.
ELSEIF employee1 CS 'ANIL'.
call SUBSCREEN sub4 .
MM = 'ANIL'.
CLEAR MM.
endif.
ENDMODULE. " USER_COMMAND_0120 INPUT
*& Module STATUS_0140 OUTPUT
text
MODULE STATUS_0140 OUTPUT.
*CASE OK_CODE.
WHEN employee1 'NEERAJ'.
screen-active = 1.
ABAP = 'NEERAJ'.
WHEN employee1 = 'UMESH'.
screen-active = 1.
SALES = 'UMESH'.
WHEN employee1 = 'RAM'.
screen-active = 1.
HR = 'RAM'.
WHEN employee1 = 'ANIL'.
screen-active = 1.
MM = 'ANIL'.
endif.
*ENDCASE.
ENDMODULE. " STATUS_0140 OUTPUT -
How to call a "Z"module pool program in a "z"report
Hi Guys,
I have two reports .
1. Report : uploads a tab delimited " .Txt1" file and update the "z1" table
".TXT1" : File contains 4 fields
2. Module pool. :Uploads a a tab delimited " .Txt2" file and update another "z2" table
".TXT2" file contains the 4 fileds of ".TXT1" and also 2 extra fields.
I want to merge (call) the module pool program in the Report and perform the upload function using only one ".TXT" file.Please do guide me precisely .
*Report:*
REPORT zrswbgcs009 NO STANDARD PAGE HEADING MESSAGE-ID zwb
LINE-SIZE 185.
TABLES: zgcs_foc. "FOC Parts Table
*data count buffer
DATA: read_cnt(6) TYPE p, "Find read record
update_cnt(6) TYPE p, "OK record
error_cnt(6) TYPE p. "Error record
*file buffer(FOC)
DATA: BEGIN OF FOC_inrec OCCURS 0,
CUSTOMER(10), "Customer
PART_CODE(18), "Parts Code
REF_NO(35), "Ref No.
REF_DATE(10), "Ref Date
QTY(12), "Parts Qty
TEXT(100), "Remark
END OF FOC_inrec.
*file buffer
DATA: BEGIN OF inrec OCCURS 0,
CUSTOMER(10), "Customer
PART_CODE(18), "Parts Code
REF_NO(35), "Ref No.
REF_DATE(10), "Ref Date
QTY(12), "Parts Qty
PRICE(15), "Parts Price
WAERK(5), "Parts Currency
TEXT(100), "Remark
END OF inrec.
DATA : v_file LIKE rlgrap-filename.
DATA gt_zgcs_foc LIKE zgcs_foc OCCURS 0 WITH HEADER LINE.
DATA gs_zgcs_foc LIKE zgcs_foc.
*File name ACCEPT--------------------------------------------------
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
*Company code
PARAMETERS: p_comp LIKE zgcs_imei-company OBLIGATORY.
PARAMETERS: pcfile LIKE rlgrap-filename OBLIGATORY LOWER CASE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
PARAMETERS: HQfile RADIOBUTTON GROUP b2.
SELECTION-SCREEN COMMENT 7(20) text-101 FOR FIELD HQfile.
SELECTION-SCREEN POSITION 31.
PARAMETERS: SUBfile RADIOBUTTON GROUP b2.
SELECTION-SCREEN COMMENT 37(20) text-102 FOR FIELD SUBfile.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK box WITH FRAME.
SELECTION-SCREEN: COMMENT /2(40) text-011, COMMENT 42(40) text-001,
ULINE,
COMMENT /2(40) text-012, COMMENT 42(40) text-002,
COMMENT /2(40) text-013, COMMENT 42(40) text-003,
COMMENT /2(40) text-014, COMMENT 42(40) text-004,
COMMENT /2(40) text-015, COMMENT 42(40) text-005,
COMMENT /2(40) text-016, COMMENT 42(40) text-006,
COMMENT /2(40) text-017, COMMENT 42(40) text-007,
COMMENT /2(40) text-018, COMMENT 42(40) text-008,
COMMENT /42(40) text-009.
SELECTION-SCREEN END OF BLOCK box.
* -- AT SELECTION SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pcfile.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = space
def_path = 'C:\'
mask = ',*.txt,*.TXT.'
mode = 'O'
title = ' '
IMPORTING
filename = pcfile
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
*-----------------------------start--------------------------------
START-OF-SELECTION.
CLEAR: read_cnt, update_cnt, error_cnt.
REFRESH gt_zgcs_foc. CLEAR gs_zgcs_foc.
PERFORM file_upload_from_pc.
SORT gt_zgcs_foc.
DELETE ADJACENT DUPLICATES FROM gt_zgcs_foc
COMPARING COMPANY CUSTOMER PART_CODE REF_NO REF_DATE.
*// customer code check
DATA: LT_ZESTD LIKE ZESTD OCCURS 0 WITH HEADER LINE.
IF NOT gt_zgcs_foc[] IS INITIAL.
SELECT COMPANY CUSTOMER CURRENCY
INTO CORRESPONDING FIELDS OF TABLE LT_ZESTD
FROM ZESTD
FOR ALL ENTRIES IN gt_zgcs_foc
WHERE COMPANY = gt_zgcs_foc-COMPANY
AND CUSTOMER = gt_zgcs_foc-CUSTOMER.
ENDIF.
SORT LT_ZESTD BY COMPANY CUSTOMER.
*// part code check
DATA: LT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
IF NOT gt_zgcs_foc[] IS INITIAL.
SELECT *
INTO TABLE LT_MARA
FROM MARA
FOR ALL ENTRIES IN gt_zgcs_foc
WHERE MATNR = gt_zgcs_foc-PART_CODE.
ENDIF.
SORT LT_MARA BY MATNR.
LOOP AT gt_zgcs_foc.
*// customer code check
READ TABLE LT_ZESTD WITH KEY
COMPANY = gt_zgcs_foc-COMPANY
CUSTOMER = gt_zgcs_foc-CUSTOMER.
IF SY-SUBRC <> 0.
WRITE:/'Invalid Customer code ',
gt_zgcs_foc-COMPANY, ' ',
gt_zgcs_foc-CUSTOMER.
STOP.
ENDIF.
*// part code check
READ TABLE LT_MARA WITH KEY MATNR = gt_zgcs_foc-PART_CODE
BINARY SEARCH.
IF SY-SUBRC <> 0.
WRITE:/ 'Invalid part code ', gt_zgcs_foc-PART_CODE.
STOP.
ENDIF.
*// REF_NO
TRANSLATE gt_zgcs_foc-REF_NO TO UPPER CASE.
SHIFT gt_zgcs_foc-REF_NO LEFT DELETING LEADING SPACE.
IF gt_zgcs_foc-REF_NO = SPACE.
WRITE:/'Ref No. is blank'.
STOP.
ENDIF.
*// REF_DATE
IF gt_zgcs_foc-REF_DATE = 0.
WRITE:/'Invalid Ref Date'.
STOP.
ENDIF.
*// QTY
* IF gt_zgcs_foc-QTY CO ' 0123456789'.
* ELSE.
* WRITE:/ gt_zgcs_foc-QTY, ' Invalid Qty value'.
* STOP.
* ENDIF.
ENDLOOP.
* Insert/Update table
* MODIFY zgcs_foc FROM TABLE gt_zgcs_foc.
INSERT zgcs_foc FROM TABLE gt_zgcs_foc.
IF sy-subrc EQ 0.
COMMIT WORK.
DESCRIBE TABLE gt_zgcs_foc LINES update_cnt.
error_cnt = read_cnt - update_cnt.
ELSE.
ROLLBACK WORK.
error_cnt = read_cnt - update_cnt.
ENDIF.
ULINE.
FORMAT COLOR 3.
WRITE: / 'Read count :', read_cnt.
WRITE: / 'Insert/Update count :', update_cnt.
WRITE: / 'Error count :', error_cnt.
FORMAT COLOR OFF.
*end-of-selection--------------------------------------------------
END-OF-SELECTION.
*& Form FILE_UPLOAD_FROM_PC
FORM file_upload_from_pc.
IF pcfile IS INITIAL.
WRITE: / 'SELECT UPLOAD FILE !'.
ELSE.
MOVE pcfile TO v_file.
* HQ file upload
IF HQfile EQ 'X'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = v_file
filetype = 'DAT'
TABLES
data_tab = FOC_inrec
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
WRITE: / 'FILE UPLOAD :', sy-subrc.
ENDIF.
LOOP AT FOC_inrec.
ADD 1 TO read_cnt.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-customer
importing
output = FOC_inrec-customer.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-part_code
importing
output = FOC_inrec-part_code.
MOVE-CORRESPONDING FOC_inrec TO gs_zgcs_foc.
MOVE p_comp TO gs_zgcs_foc-company.
MOVE gs_zgcs_foc-qty TO gs_zgcs_foc-balan.
MOVE sy-uname TO gs_zgcs_foc-ERNAM.
MOVE sy-datum TO gs_zgcs_foc-ERDAT.
MOVE sy-UZEIT TO gs_zgcs_foc-ERZET.
* Source(1:HQ,2:SUB,0:Etc)
MOVE '1' TO gs_zgcs_foc-source.
APPEND gs_zgcs_foc TO gt_zgcs_foc.
ENDLOOP.
* SGE file upload
ELSE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = v_file
filetype = 'DAT'
TABLES
data_tab = inrec
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
WRITE: / 'FILE UPLOAD :', sy-subrc.
ENDIF.
LOOP AT inrec.
ADD 1 TO read_cnt.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = inrec-customer
importing
output = inrec-customer.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-part_code
importing
output = FOC_inrec-part_code.
MOVE-CORRESPONDING inrec TO gs_zgcs_foc.
MOVE p_comp TO gs_zgcs_foc-company.
MOVE gs_zgcs_foc-qty TO gs_zgcs_foc-balan.
MOVE sy-uname TO gs_zgcs_foc-ERNAM.
MOVE sy-datum TO gs_zgcs_foc-ERDAT.
MOVE sy-UZEIT TO gs_zgcs_foc-ERZET.
* Source(1:HQ,2:SUB,0:Etc)
MOVE '2' TO gs_zgcs_foc-source.
APPEND gs_zgcs_foc TO gt_zgcs_foc.
ENDLOOP.
ENDIF.
ENDIF.
ENDFORM.
*MODULE POOL::*
*& Module Name : Warranty Bill
*& Sub-Module : W/B
*& Description : Parts Q'ty Adjust(Sales & Warranty)
*& Program Name : ZRSWBP004
*& History
*& Date Author Reason
*& 2007.05.08 Song, Ji-Hyun Initial Coding Req.by WH.Song
*& Logic Process
* - CONDITIONS
* Company, Customer, Material
* - PROCESS
* Display,Insert,Update data in the T/B ZESP04
REPORT zrswbp004 NO STANDARD PAGE HEADING
MESSAGE-ID 00
LINE-SIZE 250
LINE-COUNT 50.
* G L O B A L V A R I A B L E S *
TABLES : zesp04.
DATA : BEGIN OF itab_list OCCURS 0,
company LIKE zesp04-company,
customer LIKE zesp04-customer,
material LIKE zesp04-material,
adj_date LIKE zesp04-adj_date,
adjust LIKE zesp04-adjust,
reason LIKE zesp04-reason,
reason_code LIKE zesp04-reason_code,
doc_no LIKE zesp04-doc_no,
in_date LIKE zesp04-in_date,
create_id LIKE zesp04-create_id,
END OF itab_list.
DATA : itab_upload LIKE TABLE OF zesp04 WITH HEADER LINE.
DATA : s_mode(10).
DATA : table_name(10) VALUE 'ZESP04'.
DATA : tot_cnt TYPE i.
DATA : ref_flag(1).
* M A C R O D E F I N E *
DEFINE conversion_kunnr.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = &1
importing
output = &1.
END-OF-DEFINITION.
DEFINE conversion_material.
call function 'CONVERSION_EXIT_MATN1_INPUT'
exporting
input = &1
importing
output = &1.
END-OF-DEFINITION.
* S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE title1.
PARAMETERS : company LIKE zesp04-company MEMORY ID buk MODIF ID v1
OBLIGATORY.
SELECT-OPTIONS : customer FOR zesp04-customer MEMORY ID kun
MODIF ID v1.
SELECT-OPTIONS : material FOR zesp04-material MEMORY ID mat
MODIF ID v1.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 3.
SELECTION-SCREEN COMMENT 3(12) text-002 MODIF ID v2.
PARAMETERS : up_flag AS CHECKBOX MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(12) text-001 MODIF ID v2.
PARAMETERS : p_fname(300) LOWER CASE MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE title2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(53) text-003 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(10) text-004 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(12) text-005 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(12) text-006 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(15) text-007 MODIF ID v2.
PARAMETERS : df1 TYPE c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 24(13) text-012 MODIF ID v2.
PARAMETERS : df2 TYPE c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 41(11) text-013 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(14) text-008 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(11) text-009 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(14) text-010 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(10) text-011 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
INCLUDE zrswbp004_pbo.
INCLUDE zrswbp004_pai.
INITIALIZATION.
title1 = ' Parts Quantity Adjustment '.
title2 = ' Text File Layout '.
* S T A R T O F S E L E C T I O N *
TOP-OF-PAGE.
PERFORM write_header.
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM write_header.
START-OF-SELECTION.
IF up_flag = 'X'.
PERFORM upload_data.
ELSE.
PERFORM select_data.
SET PF-STATUS 'PF01' EXCLUDING 'SAVE'.
PERFORM display_data.
ENDIF.
AT USER-COMMAND.
PERFORM user_command.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
PERFORM get_filename.
*& Form SELECT_DATA
* Select Data for Display
FORM select_data.
SELECT * FROM (table_name)
INTO CORRESPONDING FIELDS OF TABLE itab_list
WHERE company = company
AND customer IN customer
AND material IN material.
CHECK sy-subrc <> 0.
WRITE: 'No data found with your option.'.
ENDFORM. " SELECT_DATA
*& Form DISPLAY_DATA
* Display Data following Condition
FORM display_data.
LOOP AT itab_list.
FORMAT COLOR 2 INTENSIFIED.
WRITE : / '|' NO-GAP.
WRITE : (07) itab_list-company CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-customer CENTERED NO-GAP, '|' NO-GAP,
(20) itab_list-material CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-adj_date CENTERED NO-GAP, '|' NO-GAP,
(15) itab_list-adjust RIGHT-JUSTIFIED NO-GAP, '|'
NO-GAP,
(55) itab_list-reason LEFT-JUSTIFIED NO-GAP, '|' NO-GAP,
(11) itab_list-reason_code CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-doc_no CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-in_date CENTERED NO-GAP, '|' NO-GAP,
(12) itab_list-create_id CENTERED NO-GAP, '|' NO-GAP.
FORMAT INTENSIFIED OFF.
HIDE itab_list.
ENDLOOP.
WRITE : / sy-uline(171).
ENDFORM. " DISPLAY_DATA
*& Form WRITE_HEADER
* Write Report Header
FORM write_header.
DATA : line(1024).
CLEAR line WITH '-'.
DESCRIBE TABLE itab_list LINES tot_cnt.
FORMAT INTENSIFIED ON.
WRITE : 15 'Parts Quantity Adjustment'.
SKIP.
WRITE : / 'Total Count : ', tot_cnt.
WRITE : /.
WRITE : (171) sy-uline.
WRITE : / '|' NO-GAP.
WRITE : (07) 'Company' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Customer' CENTERED NO-GAP, '|' NO-GAP,
(20) 'Material' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Adj. Date' CENTERED NO-GAP, '|' NO-GAP,
(15) 'Adjust' CENTERED NO-GAP, '|' NO-GAP,
(55) 'Reason' CENTERED NO-GAP, '|' NO-GAP,
(11) 'Reason Code' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Doc No' CENTERED NO-GAP, '|' NO-GAP,
(10) 'IN DATE' CENTERED NO-GAP, '|' NO-GAP,
(12) 'CREATE ID' CENTERED NO-GAP, '|' NO-GAP.
WRITE : /(171) sy-uline.
FORMAT INTENSIFIED OFF.
ENDFORM. " WRITE_HEADER
*& Form UPLOAD_DATA
* Data Upload from File
FORM upload_data.
DATA : l_filename LIKE rlgrap-filename,
temp_dateformat TYPE dateformat.
IF df1 = 'X'.
temp_dateformat = 'YYYY.MM.DD'.
ELSE.
temp_dateformat = 'DD.MM.YYYY'.
ENDIF.
MOVE p_fname TO l_filename.
CHECK l_filename NE space.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = l_filename
filetype = 'DAT'
dat_d_format = temp_dateformat
TABLES
data_tab = itab_list
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9.
IF sy-subrc NE 0.
MESSAGE s000 WITH 'File upload is failed!'.
STOP.
ELSE.
CLEAR : itab_upload, itab_upload[].
LOOP AT itab_list.
MOVE-CORRESPONDING itab_list TO itab_upload.
conversion_kunnr itab_upload-customer.
conversion_material itab_upload-material.
itab_upload-mandt = sy-mandt.
itab_upload-in_date = sy-datum.
itab_upload-create_id = sy-uname.
*>>>>Insert by GSCHOI 2007.11.08
IF itab_list-adj_date+0(6) NE sy-datum+0(6).
MESSAGE i368 WITH 'Adjust month must same as current month!'.
ROLLBACK WORK.
STOP.
ENDIF.
*<<<<End
APPEND itab_upload.
INSERT INTO (table_name) VALUES itab_upload.
IF sy-subrc EQ 0.
CONTINUE.
ELSEIF sy-subrc EQ 4.
MESSAGE s368 WITH 'Duplicated Data Error!'.
ROLLBACK WORK.
STOP.
ELSE.
MESSAGE s368 WITH 'File Error!'.
ROLLBACK WORK.
STOP.
ENDIF.
ENDLOOP.
ENDIF.
IF sy-subrc EQ 0.
MESSAGE s368 WITH 'Uploaded Successfully!'.
ENDIF.
ENDFORM. " UPLOAD_DATA
*& Form USER_COMMAND
* User Command Execution in Screen 1000
FORM user_command.
MOVE-CORRESPONDING itab_list TO zesp04.
CASE sy-ucomm.
WHEN 'INSERT'.
PERFORM insert_item.
WHEN 'UPDATE'.
PERFORM update_item.
WHEN 'DISPLAY'.
PERFORM display_item.
WHEN 'REFRESH'.
PERFORM refresh_list.
ENDCASE.
IF ref_flag = 'Y'.
PERFORM refresh_list.
CLEAR ref_flag.
ENDIF.
ENDFORM. " USER_COMMAND
*& Form INSERT_ITEM
* When Clicking Insert Button
FORM insert_item.
CLEAR : s_mode.
CLEAR : zesp04.
s_mode = 'INSERT'.
CALL SCREEN '100'.
ENDFORM. " INSERT_ITEM
*& Form UPDATE_ITEM
* When Clicking Update Button
FORM update_item.
CLEAR : s_mode.
s_mode = 'UPDATE'.
CALL SCREEN '100'.
ENDFORM. " UPDATE_ITEM
*& Form DISPLAY_ITEM
* When Clicking Display Button
FORM display_item.
CLEAR : s_mode.
s_mode = 'DISPLAY'.
CALL SCREEN '100'.
ENDFORM. " DISPLAY_ITEM
*& Form REFRESH_LIST
* When Clicking Refresh Button or Returning Display Screen
FORM refresh_list.
CLEAR : itab_list, itab_list[].
PERFORM select_data.
sy-lsind = sy-lsind - 1.
PERFORM display_data.
ENDFORM. " REFRESH_LIST
*& Form GET_FILENAME
* Get Filename
FORM get_filename.
DATA: l_fname LIKE ibipparms-path .
DATA : p_name LIKE sy-repid.
p_name = sy-repid.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = p_name
dynpro_number = sy-dynnr
field_name = ''
IMPORTING
file_name = l_fname.
p_fname = l_fname.
ENDFORM. " GET_FILENAME
Edited by: Matt on Nov 24, 2008 11:24 AM - surrounded the ABAP with tagsHi,
Use SUBMIT statement in your first Report zrswbgcs009 at the end, to call the Modulepool program zrswbp004.
do a search in SDN you will get lot of threads on SUBMIT statement with selection screen.
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
http://help.sap.com/saphelp_nw04/Helpdata/EN/9f/dba51a35c111d1829f0000e829fbfe/content.htm
Regards
Bala Krishna -
How to display logo in module pool screen
Hi,
I need to display a logo in the screen of module pool programming. I have already imported the logo image using transaction OAER.
Please suggest how to display the image in the screen..
Thanks and Regards,
Sayan GhoshYou can show the image using the calss
CL_DD_DOCUMENT
For reference how to use the class
check the example program
DD_ADD_PICTURE -
How to add logo in module pool screen
Hi Expert,
I need to display company logo in the module pool screen
how this can be added ?
Regards
BikasHi,
create a custom control called 'CUSTOM_CONTROL'
CONSTANTS: CNTL_TRUE TYPE I VALUE 1,
CNTL_FALSE type i value 0.
data:h_picture type ref to cl_gui_picture,
h_pic_container type ref to cl_gui_custom_container.
data: graphic_url(255),
graphic_refresh(1),
g_result like cntl_true.
data: begin of graphic_table occurs 0,
line(255) type x,
end of graphic_table.
data: graphic_size type i.
data: g_stxbmaps type STXBITMAPS,
l_bytecnt type i,
l_content TYPE standard table of bapiconten initial size 0.
g_stxbmaps-tdobject = 'GRAPHICS'.
g_stxbmaps-tdname = 'ENJOY'.
g_stxbmaps-tdid = 'BMAP'.
g_stxbmaps-tdbtype = 'BMON'.
call function 'SAPSCRIPT_GET_GRAPHIC_BDS'
exporting
i_object = g_stxbmaps-tdobject
i_name = g_stxbmaps-tdname
i_id = g_stxbmaps-tdid
i_btype = g_stxbmaps-tdbtype
importing
e_bytecount = l_bytecnt
tables
content = l_content
exceptions
not_found = 1
bds_get_failed = 2
bds_no_content = 3
others = 4.
call function 'SAPSCRIPT_CONVERT_BITMAP'
exporting
old_format = 'BDS'
new_format = 'BMP'
bitmap_file_bytecount_in = l_bytecnt
importing
bitmap_file_bytecount = graphic_size
tables
bds_bitmap_file = l_content
bitmap_file = graphic_table
exceptions
others = 1.
call function 'DP_CREATE_URL'
exporting
type = 'image'
subtype = cndp_sap_tab_unknown
size = graphic_size
lifetime = cndp_lifetime_transaction
tables
data = graphic_table
changing
url = graphic_url
exceptions
others = 4 .
create object h_pic_container
exporting container_name = 'CUSTOM_CONTROL'.
create object h_picture exporting parent = h_pic_container.
call method h_picture->set_display_mode
exporting
display_mode = cl_gui_picture=>display_mode_normal.
call method h_picture->load_picture_from_url
exporting url = graphic_url
importing result = g_result.
or you can check the program RSDEMO_CUSTOM_CONTROL
check link :
How to insert Image on Screen
thanks
Parvathi -
Calling subscreen in module pool
Hi friends,
I am trying to call sub-screen in module pool.
but it is giving me an error as "." or "ID ... FIELD ..." expected after "SUBSCREEN".
i am using followning statement
CALL SUBSCREEN SUB INCLUDING SY-REPID '0101'.
OR
CALL SUBSCREEN SUB. (SUB is screen i have created in layout).
I tried it a lot, but not able to solve it.
Kindly help me.Hi Kiran,
<li>Subscreen concept is like this. You have one main screen. You want another screen which has to be displayed on main screen when you run main screen.
<li>First we need to create subscreen area on main screen. Goto layout and click subscreen element and place on main screen and name to that subscreen area as SUB.
<li>Now create another screen type subscreen. place fields on that and write logic.
<li> Check REPORT demo_dynpro_subscreens.
Thanks
venkat.O -
Hi,Iam new to module pool.My requirement is to display data on the same screen in table control when the end user clicks on a pushbutton.For that I have created a work area in the main screen.I have created a subscreen with the table control I want data I want.But it is getting displayed immediately when the first screen is getting displayed.It should get displayed when user clicks on a pushbutton.
I think my question is clear,if not PLZ tell me where to clarify.Hi,
i got a solution for your problem and i tried it and is successful, i hope this wil resolve your problem.
as you said when you execute the transaction the table control wil be displayed, but for that you creat one more empty subscreen and make it default subscreen.
then you assign your subscreen with table control to be called when pushbutton is pressed.
DATA: NUMBER(3) TYPE N VALUE '300'. "empty subscreen
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN AREA INCLUDING SY-REPID NUMBER.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
CALL SUBSCREEN AREA.
in report program.
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'DISPLAY'.
NUMBER = '200'. "subscreen with table control
WHEN 'BACK'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
regards,
prakash reddy .s -
How to DOWNLOAD a whole module pool program????
Hi..
can anybody tell me how to download a <b>whole module pool program</b> into my desktop with .sap extension???
Actually i want to download a whole module pool program from a server so that i can upload the same program into another sap server instead of writing the whole code.
Thanx in advance......the program is exits..
i don't y it is not for ur.....
i am sending d code for the same....
create a program and check...
*& Report REPTRAN *
*& This report allows to display and save complete programs and *
*& function modules. *
*& This report was originally written by Frank Wolf, Xaption GmbH. *
*& Its original name was ZREPTRAN (see www.abaps.de). *
REPORT reptran LINE-SIZE 170 .
TABLES: d010inc, trdir, eudb, title, d020t, trkey, tfdir, tmdir, tadir,
seoclass, seoclassdf, seoclassex, seoclasstx, seometarel,
seocompo, seocompodf, seocompoex, seocompotx, seoimplrel,
seomapatt, seomapcls, seoredef, seofriends, seotypepls,
seosubco, seosubcodf, seosubcoex, seosubcotx.
TYPES: abapline(255).
TYPES: BEGIN OF ty_tit,
code TYPE rsoldleng-title,
text TYPE title-text_line,
END OF ty_tit.
TYPES: BEGIN OF ty_reptxt,
id TYPE textpool-id,
key TYPE textpool-key,
entry TYPE textpool-entry,
length(4) TYPE n,
END OF ty_reptxt.
TYPES: BEGIN OF ty_d020t,
prog TYPE d020t-prog,
dynr TYPE d020t-dynr,
dtxt TYPE d020t-dtxt,
END OF ty_d020t.
TYPES: BEGIN OF dynp_rel_type, "Dynpro-Releases
rel(1),
dot(1),
version(2),
END OF dynp_rel_type.
TYPES: BEGIN OF ty_seocompodf_t.
INCLUDE STRUCTURE seocmpkey.
TYPES: version TYPE seocompodf-version,
alias TYPE seocompodf-alias,
redefin TYPE seocompodf-redefin,
exposure TYPE seocompodf-exposure,
state TYPE seocompodf-state,
editorder(4) TYPE n,
locked TYPE seocompodf-locked,
dispid(4) TYPE n.
INCLUDE STRUCTURE seochange.
INCLUDE STRUCTURE seomtdapx.
INCLUDE STRUCTURE seoevtapx.
INCLUDE STRUCTURE seotypapx.
TYPES: typtype TYPE seocompodf-typtype,
type TYPE seocompodf-type,
tableof TYPE seocompodf-tableof,
srcrow1(4) TYPE n,
srccolumn1(2) TYPE n,
srcrow2(4) TYPE n,
srccolumn2(2) TYPE n.
INCLUDE STRUCTURE seocmpref.
TYPES: END OF ty_seocompodf_t.
TYPES: BEGIN OF ty_seosubcodf_t.
INCLUDE STRUCTURE seoscokey.
TYPES: version TYPE seosubcodf-version,
editorder(4) TYPE n,
dispid(4) TYPE n.
INCLUDE STRUCTURE seochange.
TYPES: pardecltyp TYPE seosubcodf-pardecltyp,
parpasstyp TYPE seosubcodf-parpasstyp,
typtype TYPE seosubcodf-typtype,
type TYPE seosubcodf-type,
tableof TYPE seosubcodf-tableof,
srcrow1(4) TYPE n,
srccolumn1(2) TYPE n,
srcrow2(4) TYPE n,
srccolumn2(2) TYPE n,
parvalue TYPE seosubcodf-parvalue,
paroptionl TYPE seosubcodf-paroptionl.
INCLUDE STRUCTURE seoexcapx.
TYPES: END OF ty_seosubcodf_t.
Release bis 3.1
*INCLUDE mseuxcom.
DATA: eu_key TYPE rseu1_key.
Titel
DATA: tit TYPE STANDARD TABLE OF ty_tit WITH HEADER LINE.
Release from 4.6
DATA: fun4 TYPE STANDARD TABLE OF rsmpe_funt WITH HEADER LINE.
DATA: ctx4 TYPE STANDARD TABLE OF rsmpe_ctx WITH HEADER LINE.
DATA: mtx4 TYPE STANDARD TABLE OF rsmpe_mnlt WITH HEADER LINE.
DATA: men4 TYPE STANDARD TABLE OF rsmpe_men WITH HEADER LINE.
DATA: act4 TYPE STANDARD TABLE OF rsmpe_act WITH HEADER LINE.
DATA: doc4 TYPE STANDARD TABLE OF rsmpe_atrt WITH HEADER LINE.
DATA: sta4 TYPE STANDARD TABLE OF rsmpe_stat WITH HEADER LINE.
DATA: set4 TYPE STANDARD TABLE OF rsmpe_staf WITH HEADER LINE.
DATA: pfk4 TYPE STANDARD TABLE OF rsmpe_pfk WITH HEADER LINE.
DATA: but4 TYPE STANDARD TABLE OF rsmpe_but WITH HEADER LINE.
DATA: tit4 TYPE STANDARD TABLE OF rsmpe_titt WITH HEADER LINE.
DATA: stx4 TYPE STANDARD TABLE OF rsmptexts WITH HEADER LINE.
DATA: adm4 TYPE rsmpe_adm.
Release from 4.6c
DATA: biv46c TYPE STANDARD TABLE OF rsmpe_buts WITH HEADER LINE.
DATA: reports TYPE STANDARD TABLE OF trdir-name WITH HEADER LINE,
reportname TYPE string.
DATA: i_repsrc TYPE STANDARD TABLE OF abapline WITH HEADER LINE.
DATA: i_reptx TYPE STANDARD TABLE OF textpool WITH HEADER LINE.
DATA: i_reptxt TYPE STANDARD TABLE OF ty_reptxt WITH HEADER LINE.
DATA: i_adm4 TYPE STANDARD TABLE OF rsmpe_adm WITH HEADER LINE.
DATA: i_tmd TYPE STANDARD TABLE OF tmdir.
DATA: i_tfd TYPE STANDARD TABLE OF tfdir.
DATA: i_cls TYPE STANDARD TABLE OF seoclass.
DATA: i_cdf TYPE STANDARD TABLE OF seoclassdf.
DATA: i_clx TYPE STANDARD TABLE OF seoclassex.
DATA: i_clt TYPE STANDARD TABLE OF seoclasstx.
DATA: i_cmr TYPE STANDARD TABLE OF seometarel.
DATA: i_cmp TYPE STANDARD TABLE OF seocompo.
DATA: i_cmd TYPE STANDARD TABLE OF seocompodf WITH HEADER LINE.
DATA: i_cmd_t TYPE STANDARD TABLE OF ty_seocompodf_t WITH HEADER LINE.
DATA: i_cmx TYPE STANDARD TABLE OF seocompoex.
DATA: i_cmt TYPE STANDARD TABLE OF seocompotx.
DATA: i_irl TYPE STANDARD TABLE OF seoimplrel.
DATA: i_mat TYPE STANDARD TABLE OF seomapatt.
DATA: i_mac TYPE STANDARD TABLE OF seomapcls.
DATA: i_red TYPE STANDARD TABLE OF seoredef.
DATA: i_frd TYPE STANDARD TABLE OF seofriends.
DATA: i_tpl TYPE STANDARD TABLE OF seotypepls.
DATA: i_sco TYPE STANDARD TABLE OF seosubco.
DATA: i_scd TYPE STANDARD TABLE OF seosubcodf WITH HEADER LINE.
DATA: i_scd_t TYPE STANDARD TABLE OF ty_seosubcodf_t WITH HEADER LINE.
DATA: i_scx TYPE STANDARD TABLE OF seosubcoex.
DATA: i_sct TYPE STANDARD TABLE OF seosubcotx.
DATA: i_inc TYPE STANDARD TABLE OF d010inc-include WITH HEADER LINE.
DATA: i_d020t TYPE STANDARD TABLE OF ty_d020t WITH HEADER LINE.
DATA: hdr TYPE d020s,
fld TYPE STANDARD TABLE OF d021s WITH HEADER LINE,
src TYPE STANDARD TABLE OF d022s WITH HEADER LINE,
mat TYPE STANDARD TABLE OF d023s WITH HEADER LINE.
CONSTANTS:
stars(64) VALUE
"#EC NOTEXT
comment1(64) VALUE
'* THIS FILE IS GENERATED BY THE SCREEN PAINTER. *',
"#EC NOTEXT
comment2(64) VALUE
'* NEVER CHANGE IT MANUALLY, PLEASE ! *',
"#EC NOTEXT
dynpro_text(8) VALUE '%_DYNPRO', "#EC NOTEXT
header_text(8) VALUE '%_HEADER', "#EC NOTEXT
params_text(8) VALUE '%_PARAMS', "#EC NOTEXT
descript_text(13) VALUE '%_DESCRIPTION', "#EC NOTEXT
fields_text(8) VALUE '%_FIELDS', "#EC NOTEXT
kreuz(1) VALUE 'x', "#EC NOTEXT
flowlogic_text(11) VALUE '%_FLOWLOGIC'. "#EC NOTEXT
DATA: header_char TYPE scr_chhead.
DATA: fields_char TYPE STANDARD TABLE OF scr_chfld WITH HEADER LINE.
DATA: dynp_char TYPE STANDARD TABLE OF scr_chfld WITH HEADER LINE.
DATA: prog_len TYPE p.
DATA: BEGIN OF dynp,
prog TYPE d020s-prog,
dnum TYPE d020s-dnum,
END OF dynp.
DATA:
scrp_rel TYPE dynp_rel_type VALUE '4.02'. "Rel. Scrp. 4.02
scrp_rel TYPE dynp_rel_type VALUE '4.60'. "Rel. Scrp. 4.6A
DATA dynp_rel TYPE dynp_rel_type. "akt. Rel. Dynpro
DATA: dynpro_rel(4).
DATA status.
DATA prog_len_akt TYPE p.
DATA release.
DATA rows LIKE sy-curow.
DATA lines LIKE sy-cucol.
DATA: filename TYPE string.
DATA: subrc LIKE sy-subrc.
DATA: os(10).
DATA: delux VALUE '/'.
DATA: delwn VALUE '\'.
DATA: delim.
DATA: dirux(250) VALUE '-l>dir.tmp'.
DATA: dirwn(250) VALUE '/Q /Cdir>dir.tmp'.
DATA: command(250).
DATA: shellux(250) VALUE 'bash'.
DATA: shellwn(250) VALUE 'cmd.exe'.
DATA: shell(250).
DATA: file TYPE rlgrap-filename.
DATA: answer.
DATA: incname TYPE d010inc-include.
DATA: repname TYPE d010inc-include.
DATA: rest1 TYPE d010inc-include.
DATA: rest2 TYPE d010inc-include.
DATA: kz_renam.
DATA: classname TYPE seoclsname.
DATA: classtype(2).
DATA: offset TYPE i.
DATA: savepath(250).
SELECT-OPTIONS: report FOR trdir-name.
SELECTION-SCREEN: SKIP.
SELECT-OPTIONS: cnam FOR trdir-cnam MATCHCODE OBJECT user_addr,
unam FOR trdir-unam MATCHCODE OBJECT user_addr,
devclass FOR tadir-devclass,
subc FOR trdir-subc,
rstat FOR trdir-rstat,
cdat FOR trdir-cdat,
udat FOR trdir-udat.
SELECTION-SCREEN: SKIP.
PARAMETERS: path(250).
SELECTION-SCREEN: SKIP.
PARAMETERS: display RADIOBUTTON GROUP func,
save RADIOBUTTON GROUP func,
savedspl RADIOBUTTON GROUP func.
SELECTION-SCREEN: SKIP.
PARAMETERS: codeonly AS CHECKBOX.
SELECTION-SCREEN: SKIP.
*PARAMETERS: suffix(80) LOWER CASE.
DATA: suffix(80) TYPE c.
LOAD-OF-PROGRAM.
AUTHORITY-CHECK OBJECT 'S_DEVELOP'
ID 'DEVCLASS' DUMMY
ID 'OBJTYPE' FIELD 'PROG'
ID 'OBJNAME' FIELD 'REPTRAN'
ID 'PGROUP' DUMMY
ID 'ACTVT' FIELD '03'.
IF sy-subrc <> 0.
MESSAGE e059(EU) WITH 'REPTRAN'.
ENDIF.
INITIALIZATION.
GET PARAMETER ID 'REPTRAN_PATH' FIELD path.
IF path IS INITIAL.
path = 'C:\ABAPS\'.
ENDIF.
save = 'X'.
codeonly = 'X'.
CALL FUNCTION 'WS_QUERY'
EXPORTING
ENVIRONMENT = ' '
FILENAME = ' '
query = 'OS'
WINID = ' '
IMPORTING
return = os
EXCEPTIONS
inv_query = 1
no_batch = 2
frontend_error = 3
OTHERS = 4.
IF sy-subrc = 0 AND
( os CS 'OS2' OR os CS 'DOS' OR os CS 'NT' ).
delim = delwn.
command = dirwn.
shell = shellwn.
ELSE.
delim = delux.
command = dirux.
shell = shellux.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR path.
GET CURSOR FIELD path VALUE path.
filename = path.
PERFORM fileselector.
AT SELECTION-SCREEN.
IF report[] IS INITIAL.
IF NOT reports[] IS INITIAL.
report = 'IEQ'.
report-low = reports.
APPEND report.
MESSAGE i208(00)
WITH 'Report/BSP application was also identified'(009).
ELSE.
MESSAGE e208(00)
WITH 'Enter report or BSP application or enter path'(011).
ENDIF.
ENDIF.
START-OF-SELECTION.
offset = strlen( path ) - 1.
IF path+offset(1) <> '\'.
CONCATENATE path '\' INTO path.
ENDIF.
SET PARAMETER ID 'REPTRAN_PATH' FIELD path.
FORMAT COLOR COL_BACKGROUND INTENSIFIED OFF.
eu_key-sprsl = sy-langu.
IF NOT save IS INITIAL OR
NOT display IS INITIAL OR
NOT savedspl IS INITIAL.
DOWNLOAD PROGRAMS
SELECT name FROM trdir
INTO TABLE reports
WHERE name IN report
AND cnam IN cnam
AND unam IN unam
AND subc IN subc
AND rstat IN rstat
AND cdat IN cdat
AND udat IN udat.
IF sy-subrc <> 0.
LOOP AT report.
CONCATENATE report(3) 'SAPL' report+3 INTO report.
MODIFY report.
ENDLOOP.
SELECT name FROM trdir
INTO TABLE reports
WHERE name IN report
AND cnam IN cnam
AND unam IN unam
AND subc IN subc
AND rstat IN rstat
AND cdat IN cdat
AND udat IN udat.
ENDIF.
IF sy-subrc <> 0.
MESSAGE i208(00)
WITH 'The program/function name entered does not exist!'(082).
ENDIF.
LOOP AT reports.
Check if report is in development class
classtype = reports+30.
IF reports(5) NE 'CL_O2'.
IF classtype = 'CP'.
tadir-obj_name = reports.
SHIFT tadir-obj_name RIGHT DELETING TRAILING space.
SHIFT tadir-obj_name RIGHT BY 2 PLACES.
SHIFT tadir-obj_name RIGHT DELETING TRAILING '='.
SHIFT tadir-obj_name LEFT DELETING LEADING space.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'CLAS'
AND obj_name = tadir-obj_name
AND devclass IN devclass.
ENDIF.
IF classtype <> 'CP' OR sy-subrc <> 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = reports
AND devclass IN devclass.
IF sy-subrc <> 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = reports
AND devclass IN devclass.
ENDIF.
IF sy-subrc <> 0 AND
( reports(4) = 'SAPL' OR reports(4) = 'sapl' ).
reportname = reports+4.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = reportname
AND devclass IN devclass.
ENDIF.
ENDIF.
IF sy-subrc <> 0.
CONTINUE.
ENDIF.
ENDIF.
reportname = reports.
PERFORM makepath USING reportname
path
CHANGING savepath.
PERFORM writeinfo USING reportname
savepath.
REFRESH: i_repsrc, i_reptx, i_reptxt, i_inc,
sta4, ctx4, fun4, mtx4, doc4, tit4, men4, act4, but4,
pfk4, set4, stx4, biv46c,
i_d020t, i_adm4,
i_tmd, i_tfd, i_cls, i_cdf, i_clx, i_clt, i_cmr, i_cmp,
i_cmd, i_cmx, i_cmt, i_irl, i_mat, i_mac, i_red, i_frd,
i_tpl, i_sco, i_scd, i_scx, i_sct, i_cmd_t, i_scd_t.
CLEAR: adm4.
eu_key-name = reports.
READ REPORT reports INTO i_repsrc.
IF codeonly <> 'X'.
READ TEXTPOOL reports INTO i_reptx.
ENDIF.
LOOP AT i_reptx.
MOVE-CORRESPONDING i_reptx TO i_reptxt.
APPEND i_reptxt.
ENDLOOP.
IF NOT display IS INITIAL OR
NOT savedspl IS INITIAL.
PERFORM show_rep.
ENDIF.
IF classtype = 'CP' OR classtype = 'IP'.
classname = reports(30).
TRANSLATE classname USING '= '.
SELECT * FROM tmdir INTO TABLE i_tmd
WHERE classname = classname.
SELECT * FROM seoclass INTO TABLE i_cls
WHERE clsname = classname.
SELECT * FROM seoclassdf INTO TABLE i_cdf
WHERE clsname = classname.
SELECT * FROM seoclassex INTO TABLE i_clx
WHERE clsname = classname.
SELECT * FROM seoclasstx INTO TABLE i_clt
WHERE clsname = classname.
SELECT * FROM seometarel INTO TABLE i_cmr
WHERE clsname = classname.
SELECT * FROM seocompo INTO TABLE i_cmp
WHERE clsname = classname.
SELECT * FROM seocompodf INTO TABLE i_cmd
WHERE clsname = classname.
LOOP AT i_cmd.
MOVE-CORRESPONDING i_cmd TO i_cmd_t.
APPEND i_cmd_t.
ENDLOOP.
SELECT * FROM seocompoex INTO TABLE i_cmx
WHERE clsname = classname.
SELECT * FROM seocompotx INTO TABLE i_cmt
WHERE clsname = classname.
SELECT * FROM seoimplrel INTO TABLE i_irl
WHERE clsname = classname.
SELECT * FROM seomapatt INTO TABLE i_mat
WHERE clsname = classname.
SELECT * FROM seomapcls INTO TABLE i_mac
WHERE clsname = classname.
SELECT * FROM seoredef INTO TABLE i_red
WHERE clsname = classname.
SELECT * FROM seofriends INTO TABLE i_frd
WHERE clsname = classname.
SELECT * FROM seotypepls INTO TABLE i_tpl
WHERE clsname = classname.
SELECT * FROM seosubco INTO TABLE i_sco
WHERE clsname = classname.
SELECT * FROM seosubcodf INTO TABLE i_scd
WHERE clsname = classname.
LOOP AT i_scd.
MOVE-CORRESPONDING i_scd TO i_scd_t.
APPEND i_scd_t.
ENDLOOP.
SELECT * FROM seosubcoex INTO TABLE i_scx
WHERE clsname = classname.
SELECT * FROM seosubcotx INTO TABLE i_sct
WHERE clsname = classname.
ELSE.
CLEAR classtype.
ENDIF.
IF codeonly <> 'X'.
SELECT * FROM tfdir INTO TABLE i_tfd
WHERE pname = reports.
CALL FUNCTION 'RS_CUA_INTERNAL_FETCH'
EXPORTING
program = reports
LANGUAGE =
STATE = 'A'
IMPORTING
adm = adm4
LANGU =
AUTHOR =
DATE =
TIME =
CAUTHOR =
CDATE =
CTIME =
GDATE =
GTIME =
TABLES
sta = sta4
fun = fun4
men = men4
mtx = mtx4
act = act4
but = but4
pfk = pfk4
set = set4
doc = doc4
tit = tit4
biv = biv46c
EXCEPTIONS
not_found = 1
unknown_version = 2
OTHERS = 3.
SELECT ddnr text_line FROM title INTO TABLE tit
WHERE ddlanguage = eu_key-sprsl AND
progname = eu_key-name.
SELECT * FROM rsmptexts INTO TABLE stx4
WHERE progname = eu_key-name AND
sprsl = eu_key-sprsl.
SELECT prog dynr dtxt FROM d020t INTO TABLE i_d020t
WHERE prog = reports AND
NOT dtxt LIKE 'SEL_SCREEN%'.
ENDIF.
IF NOT classtype IS INITIAL.
reports = classname.
ENDIF.
TRANSLATE reports TO LOWER CASE.
TRANSLATE reports USING '/.'.
IF NOT save IS INITIAL OR
NOT savedspl IS INITIAL.
CONCATENATE savepath reports suffix '.txt' INTO filename.
PERFORM download TABLES i_repsrc USING filename
'Source'(003).
IF NOT i_reptxt[] IS INITIAL.
CONCATENATE savepath reports suffix '_txt.txt' INTO filename.
PERFORM download TABLES i_reptxt USING filename
'Text elements'(004).
ENDIF.
ENDIF.
SELECT include FROM d010inc INTO TABLE i_inc
WHERE master = eu_key-name.
DELETE i_inc WHERE table_line(1) = '<'.
DELETE i_inc WHERE table_line(1) = '>'.
DELETE i_inc WHERE table_line = 'DB__SSEL'.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_inc[] IS INITIAL.
CONCATENATE savepath reports suffix '_inc.txt' INTO filename.
PERFORM download TABLES i_inc USING filename
'Include List'(033).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_tmd[] IS INITIAL.
CONCATENATE savepath reports suffix '_tmd.txt' INTO filename.
PERFORM download TABLES i_tmd USING filename
'Methods List'(048).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_cls[] IS INITIAL.
CONCATENATE savepath reports suffix '_cls.txt' INTO filename.
PERFORM download TABLES i_cls USING filename
'Class Entry'(050).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_cdf[] IS INITIAL.
CONCATENATE savepath reports suffix '_cdf.txt' INTO filename.
PERFORM download TABLES i_cdf USING filename
'Class Definition'(051).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_clx[] IS INITIAL.
CONCATENATE savepath reports suffix '_clx.txt' INTO filename.
PERFORM download TABLES i_clx USING filename
'Class Remote Info'(052).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_clt[] IS INITIAL.
CONCATENATE savepath reports suffix '_clt.txt' INTO filename.
PERFORM download TABLES i_clt USING filename
'Class Description'(053).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_cmr[] IS INITIAL.
CONCATENATE savepath reports suffix '_cmr.txt' INTO filename.
PERFORM download TABLES i_cmr USING filename
'Class Meta Relations'(054).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_cmp[] IS INITIAL.
CONCATENATE savepath reports suffix '_cmp.txt' INTO filename.
PERFORM download TABLES i_cmp USING filename
'Class Components'(055).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_cmd_t[] IS INITIAL.
CONCATENATE savepath reports suffix '_cmd.txt' INTO filename.
PERFORM download TABLES i_cmd_t USING filename
'Class Components Definitions'(056).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_cmx[] IS INITIAL.
CONCATENATE savepath reports suffix '_cmx.txt' INTO filename.
PERFORM download TABLES i_cmx USING filename
'Class Components Remote Infos'(057).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_cmt[] IS INITIAL.
CONCATENATE savepath reports suffix '_cmt.txt' INTO filename.
PERFORM download TABLES i_cmt USING filename
'Class Components Descriptions'(058).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_irl[] IS INITIAL.
CONCATENATE savepath reports suffix '_irl.txt' INTO filename.
PERFORM download TABLES i_irl USING filename
'Class Components Relation Types'(059).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_mat[] IS INITIAL.
CONCATENATE savepath reports suffix '_mat.txt' INTO filename.
PERFORM download TABLES i_mat USING filename
'Class Mapping Attributes'(060).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_mac[] IS INITIAL.
CONCATENATE savepath reports suffix '_mac.txt' INTO filename.
PERFORM download TABLES i_mac USING filename
'Class Mapping Classes'(061).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_red[] IS INITIAL.
CONCATENATE savepath reports suffix '_red.txt' INTO filename.
PERFORM download TABLES i_red USING filename
'Class Redefinitions'(062).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_frd[] IS INITIAL.
CONCATENATE savepath reports suffix '_frd.txt' INTO filename.
PERFORM download TABLES i_frd USING filename
'Class Friends'(063).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_tpl[] IS INITIAL.
CONCATENATE savepath reports suffix '_tpl.txt' INTO filename.
PERFORM download TABLES i_tpl USING filename
'Class Type-Pools'(064).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_sco[] IS INITIAL.
CONCATENATE savepath reports suffix '_sco.txt' INTO filename.
PERFORM download TABLES i_sco USING filename
'Class Sub Components'(065).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_scd_t[] IS INITIAL.
CONCATENATE savepath reports suffix '_scd.txt' INTO filename.
PERFORM download TABLES i_scd_t USING filename
'Class Sub Components Definitions'(066).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_scx[] IS INITIAL.
CONCATENATE savepath reports suffix '_scx.txt' INTO filename.
PERFORM download TABLES i_scx USING filename
'Class Sub Components Remote Infos'(067).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_sct[] IS INITIAL.
CONCATENATE savepath reports suffix '_sct.txt' INTO filename.
PERFORM download TABLES i_sct USING filename
'Class Sub Components Descriptions'(068).
ENDIF.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_tfd[] IS INITIAL.
CONCATENATE savepath reports suffix '_tfd.txt' INTO filename.
PERFORM download TABLES i_tfd USING filename
'Function List'(049).
ENDIF.
IF NOT i_inc[] IS INITIAL.
LOOP AT i_inc.
REFRESH: i_reptx, i_reptxt.
READ REPORT i_inc INTO i_repsrc.
IF codeonly <> 'X'.
READ TEXTPOOL i_inc INTO i_reptx.
ENDIF.
LOOP AT i_reptx.
MOVE-CORRESPONDING i_reptx TO i_reptxt.
APPEND i_reptxt.
ENDLOOP.
IF NOT display IS INITIAL OR
NOT savedspl IS INITIAL.
PERFORM show_inc.
ENDIF.
TRANSLATE i_inc TO LOWER CASE.
TRANSLATE i_inc USING '/.'.
IF NOT save IS INITIAL OR
NOT savedspl IS INITIAL.
CONCATENATE savepath i_inc suffix '.txt' INTO filename.
PERFORM download TABLES i_repsrc USING filename
'Include Source'(032).
IF NOT i_reptxt[] IS INITIAL.
CONCATENATE savepath i_inc suffix '_txt.txt'
INTO filename.
PERFORM download TABLES i_reptxt USING filename
'Text elements'(004).
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
IF NOT i_d020t[] IS INITIAL.
LOOP AT i_d020t.
IMPORT DYNPRO hdr fld src mat ID i_d020t.
CALL FUNCTION 'RS_SCRP_UPGRADE_DYNPRO'
TABLES
f = fld
m = mat
CHANGING
h = hdr.
IF src[] IS INITIAL.
DELETE i_d020t.
CONTINUE.
ENDIF.
CLEAR src.
READ TABLE src INDEX 1.
IF src-line CS 'Do not change'.
DELETE i_d020t.
CONTINUE.
ENDIF.
CALL FUNCTION 'RS_SCRP_GET_SCREEN_INFOS'
EXPORTING
dynnr = hdr-dnum
progname = hdr-prog
with_fieldlist = 'X'
IMPORTING
lines = lines
columns = rows
TABLES
fieldlist = fld
EXCEPTIONS
dynpro_does_not_exist = 01
no_field_list = 02.
hdr-bzmx = lines.
hdr-bzbr = rows.
IF NOT display IS INITIAL OR
NOT savedspl IS INITIAL.
PERFORM show_dyn.
ENDIF.
IF NOT save IS INITIAL OR
NOT savedspl IS INITIAL.
PERFORM dynpro_download.
ENDIF.
ENDLOOP.
IF ( NOT save IS INITIAL OR
NOT savedspl IS INITIAL ) AND
NOT i_d020t[] IS INITIAL.
CONCATENATE savepath reports suffix '_dyn.txt' INTO filename.
PERFORM download TABLES i_d020t USING filename
'Dynpro List'(040).
ENDIF.
ENDIF.
IF NOT save IS INITIAL OR
NOT savedspl IS INITIAL.
IF NOT sta4[] IS INITIAL.
CONCATENATE savepath reports suffix '_sta.txt' INTO filename.
PERFORM download TABLES sta4 USING filename
'GUI Status'(013).
ENDIF.
IF NOT ctx4[] IS INITIAL.
CONCATENATE savepath reports suffix '_ctx.txt' INTO filename.
PERFORM download TABLES ctx4 USING filename
'Object Codes'(045).
ENDIF.
IF NOT fun4[] IS INITIAL.
CONCATENATE savepath reports suffix '_fun.txt' INTO filename.
PERFORM download TABLES fun4 USING filename
'Function Texts'(014).
ENDIF.
IF NOT men4[] IS INITIAL.
CONCATENATE savepath reports suffix '_men.txt' INTO filename.
PERFORM download TABLES men4 USING filename
'Menus'(015).
ENDIF.
IF NOT tit4[] IS INITIAL.
CONCATENATE savepath reports suffix '_sti.txt' INTO filename.
PERFORM download TABLES tit4 USING filename
'Title Codes'(042).
ENDIF.
IF NOT mtx4[] IS INITIAL.
CONCATENATE savepath reports suffix '_mtx.txt' INTO filename.
PERFORM download TABLES mtx4 USING filename
'Menu Texts'(016).
ENDIF.
IF NOT act4[] IS INITIAL.
CONCATENATE savepath reports suffix '_act.txt' INTO filename.
PERFORM download TABLES act4 USING filename
'Menu Bars'(047).
ENDIF.
IF NOT but4[] IS INITIAL.
CONCATENATE savepath reports suffix '_but.txt' INTO filename.
PERFORM download TABLES but4 USING filename
'Push Buttons'(018).
ENDIF.
IF NOT pfk4[] IS INITIAL.
CONCATENATE savepath reports suffix '_pfk.txt' INTO filename.
PERFORM download TABLES pfk4 USING filename
'PF Keys'(019).
ENDIF.
IF NOT adm4 IS INITIAL.
APPEND adm4 TO i_adm4.
CONCATENATE savepath reports suffix '_adm.txt' INTO filename.
PERFORM download TABLES i_adm4 USING filename
'Management Information'(043).
ENDIF.
IF NOT set4[] IS INITIAL.
CONCATENATE savepath reports suffix '_set.txt' INTO filename.
PERFORM download TABLES set4 USING filename
'Function Sets'(020).
ENDIF.
IF NOT stx4[] IS INITIAL.
CONCATENATE savepath reports suffix '_stx.txt' INTO filename.
PERFORM download TABLES stx4 USING filename
'Status Texts'(023).
ENDIF.
IF NOT doc4[] IS INITIAL.
CONCATENATE savepath reports suffix '_doc.txt' INTO filename.
PERFORM download TABLES doc4 USING filename
'Status Short Texts'(024).
ENDIF.
IF NOT biv46c[] IS INITIAL.
CONCATENATE savepath reports suffix '_biv.txt' INTO filename.
PERFORM download TABLES biv46c USING filename
'Invariant Functions'(048).
ENDIF.
IF NOT tit[] IS INITIAL.
CONCATENATE savepath reports suffix '_tit.txt' INTO filename.
PERFORM download TABLES tit USING filename
'Title Bars'(030).
ENDIF.
ENDIF.
ULINE.
ENDLOOP.
ENDIF.
REFRESH reports.
*& Form DOWNLOAD
FORM download TABLES tabelle
USING value(filename)
component.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = ' '
filename = filename
filetype = 'ASC'
IMPORTING
FILELENGTH =
TABLES
data_tab = tabelle
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
IF reports IS INITIAL.
WRITE: / appls.
ELSE.
WRITE: / reports.
ENDIF.
WRITE: /(20) component.
IF sy-subrc = 0.
WRITE: 'successfully downloaded'(001).
PERFORM getfilename USING filename
CHANGING filename.
WRITE: '->', filename.
ELSE.
WRITE: 'not downloaded, RC ='(002), sy-subrc.
ENDIF.
ENDFORM. " DOWNLOAD
*& Form FILESELECTOR
FORM fileselector.
DATA: repname(250).
DATA: fdpos(2) TYPE p.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
def_path = path
mask = ',.txt,.txt.'
mode = 'O'
TITLE = ' '
IMPORTING
filename = file
RC =
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
subrc = sy-subrc.
path = file.
CLEAR: sy-fdpos, sy-subrc.
fdpos = 1.
WHILE sy-subrc = 0.
fdpos = fdpos + sy-fdpos + 1.
SEARCH path FOR delim STARTING AT fdpos.
ENDWHILE.
fdpos = fdpos - 1.
path = path(fdpos).
repname = file.
CLEAR sy-subrc.
WHILE sy-subrc = 0.
SHIFT repname LEFT.
SHIFT repname LEFT UP TO delim.
ENDWHILE.
SHIFT repname RIGHT UP TO '.'.
SHIFT repname RIGHT.
SHIFT repname LEFT DELETING LEADING space.
TRANSLATE repname TO UPPER CASE.
reports = repname.
APPEND reports.
ENDFORM. " FILESELECTOR
*& Form LS
FORM ls.
TYPES: c80(80).
DATA: dirtab TYPE STANDARD TABLE OF c80 WITH HEADER LINE.
DATA: datei TYPE string.
DATA: i LIKE sy-tabix.
DATA: endtime LIKE sy-uzeit.
CALL FUNCTION 'WS_EXECUTE'
EXPORTING
DOCUMENT = ' '
cd = path
commandline = command
INFORM = ' '
program = shell
STAT = ' '
WINID = ' '
OSMAC_SCRIPT = ' '
OSMAC_CREATOR = ' '
WIN16_EXT = ' '
EXEC_RC = ' '
IMPORTING
RBUFF =
EXCEPTIONS
frontend_error = 1
no_batch = 2
prog_not_found = 3
illegal_option = 4
OTHERS = 5.
IF sy-subrc NE 0.
MESSAGE e001(pc).
Error when executing the WS program
ENDIF.
CONCATENATE path 'dir.tmp' INTO datei.
GET TIME.
endtime = sy-uzeit + 3.
WHILE sy-uzeit < endtime.
GET TIME.
ENDWHILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = datei
filetype = 'ASC'
IMPORTING
FILELENGTH =
TABLES
data_tab = dirtab
EXCEPTIONS
file_read_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
IF sy-subrc NE 0.
MESSAGE e001(pc).
Error when executing the WS program
ENDIF.
REFRESH reports.
i = 1.
DO.
SEARCH dirtab FOR '.txt' STARTING AT i.
IF sy-subrc NE 0.
EXIT.
ENDIF.
READ TABLE dirtab INDEX sy-tabix.
i = sy-tabix + 1.
CHECK dirtab NS 'txt_.txt'.
SHIFT dirtab LEFT UP TO space.
SHIFT dirtab LEFT DELETING LEADING space.
SHIFT dirtab LEFT UP TO space.
SHIFT dirtab LEFT DELETING LEADING space.
SHIFT dirtab LEFT UP TO space.
SHIFT dirtab RIGHT UP TO '.'.
SHIFT dirtab RIGHT.
SHIFT dirtab LEFT DELETING LEADING space.
IF NOT dirtab IS INITIAL.
TRANSLATE dirtab TO LOWER CASE.
APPEND dirtab TO reports.
ENDIF.
ENDDO.
SORT reports.
DELETE ADJACENT DUPLICATES FROM reports.
ENDFORM. " LS
*& Form SHOW_DYN
FORM show_dyn.
Printing Dynpro data
Header for Dynpro
FORMAT COLOR COL_TOTAL.
WRITE: / 'Dynpro header', AT sy-linsz ''.
FORMAT COLOR COL_NORMAL.
WRITE: / 'Program:', 30 hdr-prog, AT sy-linsz '',
/ 'Dynpro:', 30 hdr-dnum, AT sy-linsz '',
/ 'Follow-up dynpro:', 30 hdr-fnum, AT sy-linsz ''.
ULINE.
Print field list
FORMAT COLOR COL_TOTAL.
WRITE: / 'Field list' COLOR COL_TOTAL, AT sy-linsz ''.
FORMAT COLOR COL_HEADING.
WRITE: / 'Field',
25 'Line',
30 'Column',
37 'TYPE',
42 'LOOPTyp',
50 'DDIC',
55 'FormByte', AT sy-linsz ''.
CALL FUNCTION 'RS_SCRP_FIELDS_RAW_TO_CHAR'
TABLES
fields_int = fld
fields_char = fields_char
EXCEPTIONS
OTHERS = 1.
FORMAT COLOR COL_NORMAL.
LOOP AT fields_char.
WRITE: /(24) fields_char-feldname,
25 fields_char-line,
30 fields_char-coln,
37 fields_char-feldformat,
42 fields_char-looptype,
50 fields_char-inttyp,
55 fields_char-fmb1,
58 fields_char-fmb2.
ENDLOOP.
ULINE.
Display logic
FORMAT COLOR COL_TOTAL.
WRITE: / 'Logic', AT sy-linsz ''.
FORMAT COLOR COL_NORMAL.
LOOP AT src.
WRITE: / src-line.
ENDLOOP.
ULINE.
SKIP.
Display matchcode data
FORMAT COLOR COL_TOTAL.
WRITE: / 'Matchcode data', AT sy-linsz ''.
FORMAT COLOR COL_NORMAL.
LOOP AT mat.
WRITE: /(80) mat.
ENDLOOP.
IF sy-subrc NE 0.
WRITE / ' no matchcode files available ' COLOR COL_NEGATIVE.
ENDIF.
NEW-PAGE.
ENDFORM. " SHOW_DYN
*& Form SHOW_REP
FORM show_rep.
FORMAT COLOR COL_TOTAL.
WRITE: / 'Program:', reports, AT sy-linsz ''.
FORMAT COLOR COL_BACKGROUND.
LOOP AT i_repsrc.
WRITE: / i_repsrc.
ENDLOOP.
ULINE.
FORMAT COLOR COL_TOTAL.
WRITE: / 'Text elements for program:', reports, AT sy-linsz ''.
FORMAT COLOR COL_HEADING.
WRITE: / 'Type',
5 'Key',
20 'Length',
30 'Text', AT sy-linsz ''.
FORMAT COLOR COL_NORMAL.
LOOP AT i_reptxt.
WRITE: / i_reptxt-id,
5 i_reptxt-key,
20(4) i_reptxt-length,
30(80) i_reptxt-entry.
ENDLOOP.
NEW-PAGE.
ENDFORM. " SHOW_REP
*& Form SHOW_INC
FORM show_inc.
FORMAT COLOR COL_TOTAL.
WRITE: / 'Include:', i_inc, AT sy-linsz ''.
FORMAT COLOR COL_BACKGROUND.
LOOP AT i_repsrc.
WRITE: / i_repsrc.
ENDLOOP.
ULINE.
FORMAT COLOR COL_TOTAL.
WRITE: / 'Text elements for include:', i_inc, AT sy-linsz ''.
FORMAT COLOR COL_HEADING.
WRITE: / 'Type',
5 'Key',
20 'Length',
30 'Text', AT sy-linsz ''.
FORMAT COLOR COL_NORMAL.
LOOP AT i_reptxt.
WRITE: / i_reptxt-id,
5 i_reptxt-key,
20(4) i_reptxt-length,
30(80) i_reptxt-entry.
ENDLOOP.
NEW-PAGE.
ENDFORM. " SHOW_INC
*& Form DYNPRO_DOWNLOAD
& -
How to insert Logo in module pool programming
Plz any one can explain me that how we will inseart Logo on screens by using module pool programming (in GUI programming) .
Hello.
I'll give you an example of inserting a personal photo in UI programming. Hope it helps you.
First of all, in your screen (painter), insert a custom control and give it a name (PHOTO in my example).
Then, in your screen PBO, insert a coding like this:
CLEAR handle.
CALL FUNCTION 'HR_IMAGE_INIT'
EXPORTING
p_pernr = pernr
p_tclas = 'A'
container = 'PHOTO'
IMPORTING
handle = handle
EXCEPTIONS
no_document = 1
internal_error = 2
OTHERS = 3.
CALL FUNCTION 'HR_IMAGE_SHOW'
EXPORTING
p_pernr = pernr
p_tclas = 'A'
handle = handle
EXCEPTIONS
invalid_handle = 1
no_document = 2
internal_error = 3
OTHERS = 4.
Regards.
Valter Oliveira. -
How to conduct training for Module Pool Programming
Hi everybody
I am going to conduct 5 days training for module pool programming.
Can you please provide me some suggestion about how to start & what r the steps?
Please provide suggestion for following
1) From where should I start
2) What should be the first step & subsequent steps
3) how should I get documentation & sample programs
thanksHello,
You can start the training by first explaining what is Module Pool programming, and why is it needed, how is it different from other forms of programming , like reports(SE38).
Then go on to explain how to create a MPP , i.e this you can do by giving the demo online, like:-
Goto SE80
Create a new program, and so on.
Talk about the various elements of MPP, such as the scree(which is also known as Dynpro), text elements, pushbuttons, tabstrips, etc, and how to use them in the program.
For sample programs and documentation, you can refer to help.sap.com, and search the documnetation for Module Pool Programming.
Thanks and regards,
Prerna
Maybe you are looking for
-
Problem with iTunes and iTouch.
Hello, I have my iPod Chromatic Nano which appears to work fine with iTunes, but as soon as I insert my iPod Touch, within seconds I get the blue screen, having to reboot my computer, I've tried reinstalling my iTunes yet it still doesn't fix the pro
-
Vendor aging unreconciled bal. does not match with TB Acct. Payable balance
Dear all, When i take unreconciled vendor aging report with selection creteria all vendor codes selected,aging date as 31/03/09 and posting date from 01/04/08 to date 31/03/09,Interval - 30 Days,By Journal postings Deticked all check boxes in it. Agi
-
Multiple Transports for the Same Object.
I have ABAP program 123 and I make a change, create transport A and release the transport. I do not request transport A go to production. I then modify ABAP program 123 again, create transport B and release the transport. I do not request transport B
-
Error creating incoming payment. (ODBC -2035)
The error that I get while creating an incoming payment is: This entry already exists in the following tables (ODBC -2035) Here is the code: public static bool CreatePayment() DateTime now = DateTime.Now; Payments pmt = (Payments) m_com
-
Get layer style parameters?
How is it possible to set and get layer style parameters? For example read out stroke size, shadow distance, etc...