How to hide/suppress unit of measure for  values of columns in structure

hi,
hi i am using following in rows and columns.
Rows:
1. material group
2. structure (key figures)
     key figure 1
     key figure 2
     key figure 3
3. base unit of measure
Columns:
1. structure (time scale)
    fiscal period 1
    fiscal period 2
    fiscal period 3
    fiscal period 4
If I run the report I am getting unit of measure for each key figure in each fiscal period. I wan to show unit of measure only once in a base unit of measure (row).
I want to suppress / hide unit of measure in columns (time scale - fiscal period). If I wasn't using strcture, I could have used NODIM in formula. But I dont think that I can use NODIM in strctuere.
Is there any alternative.
pls suggest. Thanks.

It seems that i have found the answer. I have checked the query properties --> check the option - Display scaling factors for key figures.
Pls let me know if  you have any other alternatives. Thanks.

Similar Messages

  • IS-Retail:how to maintain different unit of measures for a article

    hi experts,
                    can anyone tell me how we maintain different unit of measures for sales and purchasing for a article.base unit of measure,order unit,var unit.Hope for a good answer.
    Regards

    Hi,
    Go to MM42, select basic data view
    In,Units of measure/ EANs /dimensions sub tab
    there u can see four radio buttons
    B.Un    Unit of measure is base unit (used internally only) 
    O.Un    Unit of measure is the order unit                             - Purchasing
    D/L.Un  Unit of measure is delivery unit/issue unit              - Logistics
    S.Un    Unit of measure is the sales unit                             - Sales
    for eg:
    First line enter EA (each) or PC (piece) in Auom for a material and  enter 1 in Number and select radio button for B.Un
    Second line enter CT (carton) in Auom and  enter 10 in Number and select radio button for O.UN (when you creating a PO it UOB automatically picks as CT)
    Third line enter PALin Auom and enter 50 in Number and select radio button for D/l .UN (when u creating a delivery UOB picks as PAL ie pallets)
    Fourth line enter EA or PC and enter 1 in Number and select radio button for S.UN (when u creating a Sales order UOB picks as EA or PC as u defined)
    Mohan

  • How to suppress unit of measure in structure

    hi,
    i am using a structure values based on fiscal period. I would like to suppress unit of measure for the values. For normal key values without using structure, I can suppress unit of  measure by function NODIM. But i am not able to use that here.
    How to use it. pls reply.
    Thanks,

    Avneet,
    I am not able to understand your question - if it is a key figure structure - you should be able to use NODIM in a formula...
    Arun

  • How to handle different Unit of measures in ALV reports? Quantity/Price

    Anyone knows how to handle different unit of measures for quantity or price in hierarchy ALV reports?

    hi,
    use the below fields:
    Link to measurement unit
    •qfieldname (measurement unit field name)
    only relevant for quantity columns with unit link.
    Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME.
    The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
    •qtabname (internal measurement unit field output table)
    value set: SPACE, output table field name
    Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
    regards,
    madhumitha

  • How to update Unit Of Measure for a material in BAPI_SALESORDER_CHANGE

    Hi All
    How to update Unit Of Measure for a material in BAPI_SALESORDER_CHANGE

    hi,
    in BAPISDITM structure, which is their in orderitemin
    update updateflag of BAPISDITMX, which is their in orderiteminx for the same field with update flag = 'U'
         kindly try with <b>T_UNIT_ISO</b>
                                or
                               <b>TARGET_QU</b>
    comeback with u r comment
    regards,
    pavan
    Message was edited by:
            pavan kumar pisipati

  • Unit of measure for stock , Goods issue , Purchase.

    Dear All Experts,
    How we can maintain different unit of measure for Stock, Goods Issue, Purchase?
    Regards,
    Sandeep.

    Hi,
    The UOM qualifies the quantity you enter on the
    purchase order line. This will default in if you entered an item number, if not enter
    a UOM of your choice using the List of Values.
    Please Refer the following links...hope it helps you....
    http://help.sap.com/saphelp_45b/helpdata/en/c6/f83bb94afa11d182b90000e829fbfe/content.htm
    http://www.admin.cam.ac.uk/offices/finance/training/manuals/inv_training_stores_user.pdf
    Regards,
    Udaya.

  • Alternative unit of Measure for variant material

    Dear All,
    Here is an interesting scenario,
    There is a naterial Billet with two variant characteristics length and size. and base unit of measure is TON. Now alternative unit of measure is PCS.  How can define the conversion factor on the basis of these two variant characteristics.
    In normal material (without variant char.)
    we can define conversion factor 1PCS= 2TON
    For variant material,
    For the material Billet with variant charc length and size how can i define conversion
    so that system calculates diff. PCS with diff. length and size but material is same. So how can i Do that.
    for example for same material Billet but variant char. Length is 6 M and size is 120*120 ,its wt will be 2 TON for 1 PCS.
    for the same material Billet with variant char. length 12 M and size 120*120, its wt will be 12TON for 1 PCS.
    How can i cater this for the same material.

    Hi Shoaib,
    We have faced the similar scenario for steel industry. Based on my experience, it is not possible to define variable values for Alternative UOM conversion with the variant characteristic/configuration, specially if you want SAP to maintain inventory with variable conversion rate.
    Use the Batch specific unit of measure for this situation.
    1) Create batch specific UOM i.e. Ton_per_pc (TOP) --- User proportional unit conversion
    2) Create batch characteristic ton_per_pc and assigned UOm.
    3) In material master additonal data select proportion unit and enter the standard conversion rate between ton & pcs.
    4) While doing GR - In batch creation you can enter whatever the conversion rate is and Inventory will be updated accordingly.
    Regards,
    Ravi.

  • Multiple Units of Measurements for a single item

    Hi all,
    How do I maintain multiple units of measurements for a single Item/  I have a scenario where purchase orders are being made for sand in Metric Tons, Tons, Kgs and Cubit Feets.  Each measurement is being used at each construction site of the company but the item is single sand.   One more problem is here with the material reconciliation of stock since it is maintained in different units of measurement and conversion from unit to other is problematic.
    Thanks
    YSvee Reddy

    Hi YSvee Reddy ,
    Julie is correct in saying that this feature will be available in version 8.8, currently in Ramp-up.
    Please see the [8.8 landing page |https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&]for a link to the 'What's new' document.
    You can contact your LPE to discuss participation in Ramp-up.
    All the best,
    Kerstin

  • Additional/suplimentary unit of measure for Intrastat

    Hi!
    I am trying to generate the Intrastat declaration.
    I have a problem; i am using an commodity code with suplimentary unit of measure p/st. But I cannot define the unit of measure p/st in SAP because the maximum lenght for unit of measure is three characters.
    There should be a table BNADDM in SAP where suplimentary unit of measure exists. But this table in empty im my system.
    How can I configure unit of measure p/st in SAP in order to add it to commodity code configuration?
    Thanks,
    Marcel

    found in Romania_Intrastat_docuE.doc which is attached to OSS note 1016386 - Intrastat for Romania
    Customizing for the Electronic format
    Please note following customizing related to the conversion of the Supplementary Unit of Measure has been involved.
    The issue: The information about unit measure in SAP is maintained with majuscule (capital letters) and in external system (INS) no (e.g. M3 in SAP and in INS it is m3.)
    The customizing is to setup the correct INS supplementary units of measure. Once you need to convert any UoM supplied with SAP application, fill the external system (INS) Unit of measure via the maintenance view:
    /CEECV/ROLO_UO_V via transaction sm30.

  • HELP Make Settings for Units of Measurement for Monitoring of Consumption

    Hello All:
    I just cant' define an unit of measure to stablish consumption calculation. I know how to make all the other settings, but I just can't stablish the unit of measure to use in there.
    Could please somebody gime this explanation ? Step by step ?
    I've read that are preconfigured units of measure for examplo MPG miles per gallon US but I will use Kilometers per litre.
    I want to know how to create this unit
    how to link it with an existing SI group
    So I can use it in the step Make Settings for Units of Measurement for Monitoring of Consumption
    thanks in advance
    Luis Henrique

    Dear Luis,
    Please use CUNI t code for creating unit of measurement. Please follow any exist Unit of measurement and replicate the same. This is a configuration so will have transport requirement
    Regards
    Gajesh

  • Report for Units of measurement for Material

    Hi
    Is there any report to extract the alterante unit of measurements for materials in a plant.
    Thanks

    Hi,
    Please use the below table,
    Related to Materials:
    MARA - Material Master: General data
    MAKT - Material Master: Description
    *MARM - Material Master: Unit of Measure*
    MAPE - Material master: Export control file 
    MARC - Material master: Plant data
    MARD - Material master: Storage location 
    MAST - Material link to BOM
    MBEW - Material valuation
    MLGN u2013 Material Master: WM Inventory
    MLGT u2013 Material Master: WM Inventory type
    MDIP - Material: MRP profiles (field contents) 
    MKOP - Consignment price segment (old versions of SAP)
    EBEW - Valuation of sales order stock
    QBEW - Valuation of project stock
    MVER u2013 Material Master: Consumption <Plant>
    DVER u2013 Material Master: Consumption <MRP Area>
    MVKE u2013 Material Master: Sales <Sales Org, Distr Ch>
    MLAN - Material Master: Tax indicator
    MARC - Material Master: Plant data
    MAPR u2013 Material Master: Forecast
    MARD u2013 Material Master: Storage Location
    MCH1 u2013 Material Master: X Plant Batches
    MCHA u2013 Material Master: Batches
    MCHB u2013 Material Master: Batch Stock
    MDMA - MRP Area data
    DBVM - MRP Planning File Entry: MRP Area
    MOFF - Outstanding Material Master Records (Maintenance status)
    MARCH - Material Master C Segment: History
    MARDH - Material Master Storage Location Segment: History
    MBEWH - Material Valuation: History
    MCHBH - Batch Stocks: History
    MKOLH - Special Stocks from Vendor: History
    MSCAH - Sales Order Stock at Vendor: History
    MSKAH - Sales Order Stock: History
    MSKUH - Special Stocks at Customer: History
    MSLBH - Special Stocks at Vendor: History
    MSPRH - Project Stock: History
    MSSAH - Total Sales Order Stocks: History
    MSSQH - Total Project Stocks: History
    Regards,
    Mohd Ali.

  • How to hide fields in Infotype 16 for Molga 28

    Hi Guys,
    I need to hide some fields for IT0016 for Molga 28. Earlier we have assigned different screen for this molga .But now we have assigned the standard  screen to IT0016 i.e. View-3211. But when i go to node Change Screen Modifications, i m unable to find MP321100. I have checked through PA30 for chinese employee the Program is MP321100 and screen is 2000.
    COuld you guide how to hide some of the fields for Chinese Molga 28 in IT0016.
    Regards,
    Navneet

    Hi Harish,
    I havent got the chance to check with BASIS yet....they are lil busy .....meanwhile i have created an entry in t588m with Module pool mp321100 and feature p0016. As u told i have created entry with Molga 28 and return key 28 in P0016 feature.
    Could you confirm that i need to Create mP321100 or i could have done it via mp001600 as told by other guy.
    And now if i go the fields are hidden except for two fields which strangely are coming "ER Notice Period" and
    "EE Notice Period". I have hidden all fields still these two fields are cming any idea why?
    Regards,
    Navneet

  • Unit of measure for calculation type C must be completed

    Hi All
    When releasing some contracts in SRM , we are getting the error message as above.
    The error message doesn't specify any particular part and the contract has more than 3000 parts.
    There are no conditions at header or item level.
    There is no Target quantity also. Just a Target value for the contract and prices for individual items are maintained.
    We are using extended classic scenario and the contract is manually created in SRM.
    I have checked the OSS notes for this error, but they are mostly for contract creation in Bidding and not for a manually created SRM contract.
    We checked the UOMs for all the contract parts with the UOMs ( Base and Purchasing) in ECC Material Master and they are OK.
    In our scenario , MM changes in ECC are replicated to SRM in real time
    Any pointers towards pin pointing the error will be rewarded!
    Regards
    Kedar

    Hi,
    We encountered this error message and resolved the problem by applying the following 3 SAP Notes:
    a)     Note #1022928 - Unit of Measure for Calculation Type C Must Be Completed
            (Previously Mentioned)
    b)     Note #1702484 - Unit of Measure for Calculation Type C Must Be Completed
    c)     Note #1517648 - Default Conditions Added for Product Category Item Type
    Although the contract required is similar to a "Limit" item, but had to be placed for bid, then the RFX PS Item Type was set to "Service" to receive the bid responses.  After accepting the bid response, then we created a contract from the bid response.  Since it was to be a "Limit" type contract, then we immediately removed the data from the following fields:
    Remove the Quantity
    Remove the Unit of Measure
    Remove the Price
    Remove the Price Condition
    After removing the values from these fields, then we switched the PS Item Type from "Service" to "Product Category".  We added the Guaranteed Minimum and account assignment data to encumber the funds.  We were able to "Release" the contract successfully.
    Bob Zinsmeister

  • Unit of measure for a pallet layer in MATMAS03

    Hi all,
    maybe ths is not the correct forum where to post this question, if  it's out of topic I apologize in advance.
    Fast question:
    What is LAY? it is  alternative unit of measure for pallet layers?
    When i receive the IDOC i recieve LR as UOM, what is the relation between LR and LAY?
    Thanks & regards
    Andrea

    These units could have been defined only in your system (I don't see them in ours). If it is so, no one here will be able to answer.
    The conversion factors could be in Material Master (MM03), on Basic Data screen click Additional Data button and go to the Units of Measure tab. Also see tables MARM and T006.

  • Unit of Measure for Services

    Dear Friends,
    I have cretaed RFQ for services such as Manpower Hiring where Item category is,"D".Unit of Measure is UT.
    Now I have selected the line item and clicked on Services to enter the details of Manpower such as Welders,Fitters,Carpenter etc. and here Unit of measure is HR (Hours).
    Now when I am taking print out of this RFQ.Unit of Meauser for Manpower is UT,it is correct.But unit of Measure for Welders,Fitters,Carpenter etc is STD.Infact it should be HR.
    I have checked the table ESLL and value of Unit of Measure here for Welder,Fitters,Carpenter etc and it is  STD.
    Can anyone explain me why the values are flowing as STD but not as HR?
    Thanks in advance.
    Regards,
    Shrikant

    Hi ,
    Check is there any translation happening for your unit mentioned..
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1c/1b5d427609c153e10000000a1550b0/content.htm
    I remember i had this issue once ..
    Thanks,
    sudhi

Maybe you are looking for

  • Update will not work for Acrobat X Pro

    I just bought Adobe Acrobat X Pro and it will not let me update the installed version.  Bought it two weeks ago.  It says some components or programs were moved or modified?  So I uninstalled and reinstalled and it still will not let me do the latest

  • CS4\5 - Easy Way to Convert Gradient Stops to Swatches?

    Hi Folks I wonder if there is an easy way to do this? I am working with an AI file where I want to create swatches for every colour I use to ensure consistency. There are a number of gradients in the document, and I have stored the colour stops from

  • How to format my ngage QD when it cannot turn on

    please help me I've search all the web to find the solution how to format my ngage qd because it cannot turn on please help me i'm desperate to find the solution.

  • Requisition Creation -- E-Recruiter

    When the requisition is created by the recruiter (in the recruiter role) , how does it get approved by the manager. Is there a delivered workflow available

  • Help with overlaying a different "skin" on a hand

    Hi, I've seen images such as a camera body where a different "skin" was applied, such as snake skin but all the contours, shading etc of the camera were preserved.  What I would like to do is add a latex exam glove to a hand that is already in an ima