How to hide the owner name on the client

Hello,
I would like to ask is there any possibility to hide the owner and description details while selecting the report on the client end i.e. Discoverer viewer.
My client has issues in the owner name being displayed over there...
Thanks!

Hi,
take a look at MOS DOC ID 306832.1
You may have a problem doing that since a report can be saved with the same name by different users so you will get duplicated names without the
ability to identify the report you need (most common are users that saves as workbook1).
Tamir

Similar Messages

Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regards

You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards

How to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

how to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

Within Aperture you have Images, which are constructed on-the-fly from two files (the Master and the Version). You get an image-format file _only_ when you export an Image. You select the file name (usually a scheme) when you create an image-format file (that is, when you export). Look under "Aperture→Presets→File Naming" for built-in Presets. You can, of course, create your own or customize any provided.
The Preset is applied to only the file newly created by your "export" command. It is not applied to the Image in Aperture (unless you rename your Versions or your Masters).

How to hide the field from the view in the webdynpro application?

Hi Gurus,
I got a requirement where in which ,default layout has the field name Time.......To......... which is (2 input box ) and one lable assigned to the container.........
Now my requirement is to hide this field from the layout for all cases of leave......(all types of leave)....
I got a few inputs from forum that we can achieve this by implementing the following steps..........
Create In context => Value attribute => Say Visibility
Go to its properties
Select com.sap.ide.webdynpro.uielementdefinitions.Visibility
In View Layout
Select UI Element Set Visible property to this context variable Visibility.
In wdDoModifyView() You can set this property to false
wdContext.currentContextElement().setVisibility(false);
Can you people tell me where to create the value attribute........
In the view context or in the component context...........
and field that am talking about is assign to the container you want me to assign this context variable property to all ......Like to input box ,label and the container..........
Please calrify this ASAP...........
Thanks in Advance,
Dharani

Hi Manoj......
Hi Murutuza,
As per your guidelines I have created the value attribute in View context (which has the field..... which needs to be hide)inside the value node say FieldVisibility.......and attribute name OldTimeDuration......and I set this value with uidefeneitions Visibility .......
and I bind this vaule with the field property visible(Time.......To..........)which I need to hide...........
Now in the view implementation tab ..........I have coded in the doinit method(since my requirement to hide the field from the layout in all cases).........
wdContext.currentFieldVisibilityElement().setOldTimeDuration(WDVisibility.NONE);
But if I deploy the application and see still am getting the same field dispalying in the screen.........
I even tried putting this code in wdmodifyview method.........same results........
Kindly tell me how to hide the field permenantly from the screen............(without any conditions.)
Thanks in Advance,
Dharani

How to Hide the Parameter field at run time....

Hi,
I have a parameter field which behaves differently depending on the User logged in.
It has the LOV coming from following SQL.
SELECT customer_name FROM Cust_mast;
If the user = 'INTERNAL' then the Where clause will be
WHERE cust_id in('DELL', 'SBC', 'BANK')
Else there will be no WHERE clause or the parameter field
should be hidden in the parameter form.
So my questions are:
1) How to hide the Parameter field during Run time?
OR OR OR
2) How to change the LOV select statement during Run time?
Thanks.
Ram.

Hi Ram,
Is there any way to play with the sql query SELECT using DECODE ?I'm not sure of this part, maybe someone else can suggest a way.
However, what you want can be done in 2 other ways:
1. Build 2 reports. Both reports will just be duplicates of each other, only difference being that the 'LoV where clause' will be different. Now you can fire the appropriate report in many ways. For example, if the customer is alreay logged inside your custom application, and therefore you already know whether the user is internal of external, you can design your button or link which launches the report to contain logic such that one of the 2 reports is fired depending on who the user is.
1. Use a JSP parameter form, not a paper parameter form In this case, just build an HTML parameter form in the web source of your report. Use Java logic to populate the LoV drop-down list. When you have to launch the final report, just launch the paper-layout of the report. For example (you will have to modify this):
<form action="http://machine:port/reports/rwservlet?report=ParamForm.jsp+..." name="First" method="post">
<select name="selected_customer" onChange="First.submit()" >
<option value="">Choose a Customer Name
<rw:foreach id="G_cust_id" src="G_cust_id">
<rw:getValue id="myCustId" src="CUSTOMER_ID"/>
<rw:getValue id="myCustName" src="CUSTOMER_NAME"/>
<option value="<%=myCustId%>"><%=myCustName%>
</rw:foreach>
</select>
</form>
In the code above, you will have to make sure that your report's data model defines 2 CUSTOMER_ID's (like CUSTOMER_ID_INT and CUSTOMER_ID_EXT). These 2 will be internal and external Cust ID's. Use Java logic to show one of them.
Navneet.

How to hide the fileds

how to hide the fileds in a form for one activity and how to display the same fields to another activity? in the same process
Edited by: jaya on Aug 9, 2010 10:07 PM
Edited by: jaya on Aug 9, 2010 10:40 PM

Inside of the screenflow, you can determine the name of the activity in an Autmatic task using logic like this:
myObject.activityName = Activity.nameThe use of upper case "Activity" in the above logic is correct for logic inside of an automatic task inside a screenflow.
This would let you use an if / elseif statement inside your presentation initialization method to hide or show the fields based on the activity's name. Note that this is actually the activity id. It is not the activity name you see in Studio that can be edited.
Dan

How to hide the pricing conditions specified in pricing procedure of sd.

dear friends,
my situation is to hide the conditions specified in the pricing procedure. so that it is not viewed by the some users.can you please tell me how to hide the conditions. so some of the persons, who are having authorization to see the conditions , will be able to see the pricing conditions.
can you please suggest me how to do this.
regards,
g.v.shivakkumar

Authorisation issues viz. Role Impementations
Hide Condition Records Line Item & Header Wise from all the transactions QK / So / P.I. / Enquiry / Invoice etc. for specific user grps. - in CRETATE / AMEND / DISPLAY / REPORTS all
Only Display the fields
regards,
g.v.shivakkumar

How to hide the data in particular table in oracle 10g

How to hide the data in particular table in oracle 10g
i want steps

If its on Report u can always hide the column - Keyfigure or Selection - Display - Hide......y do u want to have it on the report if it is to be hided in the first place?

How to hide the view latest instance option for the reports in XIR3

Created an access level and denied the rights "view document instances" and "view document instances that the user owns" in the access level.
Applied this access level for a particular group on a particular folder.
Login to Infoview and when view the history,there are no instances for a particular report under that folder.
But we could still see the 'View Latest instance' option in the properties of the report and when click on it,we are able to view the report.
As per the security assigned,the user should only be able to view the instances owned by him.
Plz help me how to hide the option in INFOVIEW

In 9.3.1 (not sure about 9.2) there is a table in your BIPlus repository which stores preferences/profile information, however, having a user simply log in to WA doesn't appear to automatically create a row for them in this table. (So this may not be a viable solution to your situation, I'm still looking for one myself.) This table stores lots of preference info such as whether or not to show the Main Menu, Toolbar, Masthead, etc. by default.
To hide the View Pane, edit the data in the SHOW_INFO_PANEL column, change it from a 1 to a 0 and for that user the View Pane will not longer appear by default.
HYA_USER_PREFS
But again, this only works if you already see the user in the table otherwise I guess maybe they have to 'touch' their Preference before it creates an entry in that table. Haven't figured that part out yet, and Support didn't have any information.
If anyone has found a way to maneuver through the table structures I'd love to hear any insight you can offer.
Before you make any changes to the data in this table be sure to take adequate repository backups, and use caution as usual.
I'm going to create a Shared Preference and have each user point to it the first time they log in - but then you lose the ability for each user to have their own personal folder as their default, so it's still not the ideal solution. Really wish there was a way for Admins to set certain prefs. A coworker reminded me under 7.? or 6.x things like View Pane were system-level settings which was easy to control, but now it's at the user level.
Good luck,
Karen

How to hide the select-options fields on radiobutton select in webdynpro

hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement below

Hi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k

How to hide the PORT NUMBER from the URL

Hi,
We have Application on Node 1 and Database on Node 2
Apps Version: 11.5.10.2
DB: 9.2.0.6
We recently added a new node to act as web server for iSupport.
Now we are able to access the url using public Ip-address which looks like
http://<Internet Ip-Address>:<PORT NUMBER>
Eg: http://******.com:8000
But we dont want the *'PORT NUMBER(8000)'* to be displayed.
How to hide the port number ?..
Thanks in Advance,
Mahesh

Hi Hsawwan,
Can you plz explain me the steps how to hide the port number from the url as our network administrator is not aware of this.
Regards,
Mahesh

How to hide the menus in Weblogic Portal?

I have to develop a page in Weblogic Portal 10.0 that uses a portlet for the UI presentation.
I have a requirement that the page is hidden by default. When I navigate to the page by selecting a link, I have to display the contents in that page. While displaying I should hide the portal level menus of other books/pages. But I have to display other contents like logo, etc.
Can some one please help me on how to hide the menus in the selected page?
Edited by: [email protected] on Apr 19, 2010 3:43 AM

As a quick and dirty solution i would edit the navigation jsps (singlelevel/multilevel/yourcustom menu jsp) and disable the navigation for all hidden pages.
Or create a backing file and dynamically change the navigation state on the desktop when the hidden page is requested.
Or have the page in a different portal file if possible and set the same header and footer there as well.
Or You could have a look at the detached portlets. These are used as popups often.

How-to hide the portal file shares on Windows

Hi,
Does anybody know how to hide the default file shares created by SAP NW 04 in windows?
In other words: what I'm trying to accomplish is renaming the sapmnt share and saploc share (both on the E:\usr\sap\ folder) to sapmnt$ and saploc$.
I know how to do the Windows part, but where and how do I configure the SAP Web AS part?
Regards,
Steven Dijkman

Hi guys,
Thanks for all the feedback. However, this still does not fully work.
I tried hiding the folder but it in fact only hides the folder, not the share itself. I'm trying to do the opposite, hiding the share (making it an administrative one) whilst not hiding the folder. With the folder hidden, the startup framework (NW 04 EP6 SP12) does not work.
By the way: checking / tightening access is not an option: security architects dictate what needs to happen here and unless I have VERY good reasons I should comply to what they say: change saploc to saploc$ and change sapmnt to sapmnt$.
If anybody has anymore thoughts, I'd be very interested.
Cheers,
Steven Dijkman

How to hide the title of a region or a region without a title?

Hi All,
I am desperate to align 4 regions on a report page in my Apex app. I need 4 empty HTML regions, I am creating a table (please refer to this tutorial http://www.apex-blog.com/oracle-apex/how-to-align-regions-on-a-page-10.html). I don't know how to hide the title of these empty regions. As I place a report in each of these regions, I do not want their (empty regions') titles to be displayed? I have searched everywhere on the forum, even sent an email to this tutor, but so far no reply.
Thank you all, as ever!
Naushad.

Hello Naushad,
I am also looking for something to align my regions. I followed the steps mentioned in the link you provided, but somehow my empty cell space is coming after the second region for example in link example after "copy to" instead of between "Copy From" and "Copy to". Which template did you use for the html region "Copy From" and "Copy to" for???
Will appreciate if can provide any help. It's very urgent.
Thanks,
Suman

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

How to hide the Print and Export button in analytics report or tasks pane

Hi Experts,
In BIEE 11g,
How to hide the Print and Export button in analytics report or tasks pane ?
For example:
In console,I have created one userA which is belong to BIConsumer GROUP , when I make use of the highest user 'weblogic' to create one simple report, then the userA will login the analytivs to view this report (not dashboard), it will show the print and export as below.So customers do not want to give him the privilege for printing and exporting.
In addtion, go to catalog->tasks(left corner), it will also show the print and export button. So how to hide or not access these button?
Note: Maybe it can use the policy for consumer role for implementing this requirement, but I do not know how to modify the policy. Are you facing the problem? Thanks.

Hi,
1. Create seperate folder for Reports & Dashobard.
2. For BI_Consumer (userA) set the catalog permission to view Dashboard Folder only and remove permission on the Report Folder (you can give traverse permission but don't give Open permision).
3. By this user won't be able to open or run any reports in that folder and the only way he can see the reports is through Dashboard and on dashboard the export and print buttone can be removed very easily.
Mark helpful if it helps.
Regards,
Kashi
Edited by: K N Yadav on 24 May, 2013 1:51 AM

How to hide the owner name on the client

Similar Messages

Maybe you are looking for