How to hide the report

Hi Team,
Here the requirement is there is one dash board promt in that we are hard codeing the vlaues as REPORT 1 and REPORT 2 and the reports will be one after the other when we select REPORT 1 REPORT 2 shuold hide and it as to show only REPORT 1 when we select REPORT 2 REPORT 1 should hide and it should show only REPORT 2 this is the requirement.... will any body give an idea how to acheive this
Thanks,

Hi,
You would have to create one dummy report to achieve this.
Create a presentation variable in your prompt (which returns either 'Report 1' or 'Report 2'). Let's refer this as "p_var".
Create a dummy report with a filter condition '@{p_var}' = 'Report 1'. Let's refer this report as "Dummy Report".
In the dashboard place your two original reports in two different sections.
Navigate to the first section, under section properties click Guided navigation. Set "Reference Source Request" to Yes and provide the path for "Dummy Report" in the source request box. Check "If request returns rows" under Show Section.
Do the same for the other section, but check "If request returns nothing". That should do it.
Regards,
Seetharam

Similar Messages

How to hide the report progress window

hii all
i am running a report using a run_product builtin from a form but i want to hide the report progress window
how can i do that
thanks

Ayman,
the only way to do this is to run teh Reports in asynchronous mode which will have it running as a background job.
frank

How to hide the report "No data available" message

Hi,
When there are no results from a query execution I would like to hide or at least replace by 0 the "No data available" message.
I'm working on BI 7 and the query is included in a web template that has a button to export to excel and the objective is that this message doesn't appear in the exported file.
Do you know if this is possible? If yes please tell me how to do it.
Regards,
Ana

Hi,
Thanks for your answer.
I will explain my issue a little bit further.
I'm working in BI 7 and I create a web template that contains five queries and a button to export all the queries results to an excel file.
So when executing the query in the portal, depending on the selection criteria inserted some of the queries show the message "No data available" and using the button to export to excel the generated file include that message too. It would be preferable to delete the message in the web and in the excel file, but we need to replace at least in the excel file.
I don't know if this is possible with some script so if you have some export script example please post it here.
If there is some way that when no records exists return zero I think that with a formula I can hide the result but I don't know how to get the 0 value....
If you can help in some way I would be very grateful.
Regards,
Ana

How to hide the view latest instance option for the reports in XIR3

Created an access level and denied the rights "view document instances" and "view document instances that the user owns" in the access level.
Applied this access level for a particular group on a particular folder.
Login to Infoview and when view the history,there are no instances for a particular report under that folder.
But we could still see the 'View Latest instance' option in the properties of the report and when click on it,we are able to view the report.
As per the security assigned,the user should only be able to view the instances owned by him.
Plz help me how to hide the option in INFOVIEW

In 9.3.1 (not sure about 9.2) there is a table in your BIPlus repository which stores preferences/profile information, however, having a user simply log in to WA doesn't appear to automatically create a row for them in this table. (So this may not be a viable solution to your situation, I'm still looking for one myself.) This table stores lots of preference info such as whether or not to show the Main Menu, Toolbar, Masthead, etc. by default.
To hide the View Pane, edit the data in the SHOW_INFO_PANEL column, change it from a 1 to a 0 and for that user the View Pane will not longer appear by default.
HYA_USER_PREFS
But again, this only works if you already see the user in the table otherwise I guess maybe they have to 'touch' their Preference before it creates an entry in that table. Haven't figured that part out yet, and Support didn't have any information.
If anyone has found a way to maneuver through the table structures I'd love to hear any insight you can offer.
Before you make any changes to the data in this table be sure to take adequate repository backups, and use caution as usual.
I'm going to create a Shared Preference and have each user point to it the first time they log in - but then you lose the ability for each user to have their own personal folder as their default, so it's still not the ideal solution. Really wish there was a way for Admins to set certain prefs. A coworker reminded me under 7.? or 6.x things like View Pane were system-level settings which was easy to control, but now it's at the user level.
Good luck,
Karen

How to hide the Print and Export button in analytics report or tasks pane

Hi Experts,
In BIEE 11g,
How to hide the Print and Export button in analytics report or tasks pane ?
For example:
In console,I have created one userA which is belong to BIConsumer GROUP , when I make use of the highest user 'weblogic' to create one simple report, then the userA will login the analytivs to view this report (not dashboard), it will show the print and export as below.So customers do not want to give him the privilege for printing and exporting.
In addtion, go to catalog->tasks(left corner), it will also show the print and export button. So how to hide or not access these button?
Note: Maybe it can use the policy for consumer role for implementing this requirement, but I do not know how to modify the policy. Are you facing the problem? Thanks.

Hi,
1. Create seperate folder for Reports & Dashobard.
2. For BI_Consumer (userA) set the catalog permission to view Dashboard Folder only and remove permission on the Report Folder (you can give traverse permission but don't give Open permision).
3. By this user won't be able to open or run any reports in that folder and the only way he can see the reports is through Dashboard and on dashboard the export and print buttone can be removed very easily.
Mark helpful if it helps.
Regards,
Kashi
Edited by: K N Yadav on 24 May, 2013 1:51 AM

How to hide the pricing conditions specified in pricing procedure of sd.

dear friends,
my situation is to hide the conditions specified in the pricing procedure. so that it is not viewed by the some users.can you please tell me how to hide the conditions. so some of the persons, who are having authorization to see the conditions , will be able to see the pricing conditions.
can you please suggest me how to do this.
regards,
g.v.shivakkumar

Authorisation issues viz. Role Impementations
Hide Condition Records Line Item & Header Wise from all the transactions QK / So / P.I. / Enquiry / Invoice etc. for specific user grps. - in CRETATE / AMEND / DISPLAY / REPORTS all
Only Display the fields
regards,
g.v.shivakkumar

How to hide the data in particular table in oracle 10g

How to hide the data in particular table in oracle 10g
i want steps

If its on Report u can always hide the column - Keyfigure or Selection - Display - Hide......y do u want to have it on the report if it is to be hided in the first place?

How to hide the title of a region or a region without a title?

Hi All,
I am desperate to align 4 regions on a report page in my Apex app. I need 4 empty HTML regions, I am creating a table (please refer to this tutorial http://www.apex-blog.com/oracle-apex/how-to-align-regions-on-a-page-10.html). I don't know how to hide the title of these empty regions. As I place a report in each of these regions, I do not want their (empty regions') titles to be displayed? I have searched everywhere on the forum, even sent an email to this tutor, but so far no reply.
Thank you all, as ever!
Naushad.

Hello Naushad,
I am also looking for something to align my regions. I followed the steps mentioned in the link you provided, but somehow my empty cell space is coming after the second region for example in link example after "copy to" instead of between "Copy From" and "Copy to". Which template did you use for the html region "Copy From" and "Copy to" for???
Will appreciate if can provide any help. It's very urgent.
Thanks,
Suman

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

How to Hide the Parameter field at run time....

Hi,
I have a parameter field which behaves differently depending on the User logged in.
It has the LOV coming from following SQL.
SELECT customer_name FROM Cust_mast;
If the user = 'INTERNAL' then the Where clause will be
WHERE cust_id in('DELL', 'SBC', 'BANK')
Else there will be no WHERE clause or the parameter field
should be hidden in the parameter form.
So my questions are:
1) How to hide the Parameter field during Run time?
OR OR OR
2) How to change the LOV select statement during Run time?
Thanks.
Ram.

Hi Ram,
Is there any way to play with the sql query SELECT using DECODE ?I'm not sure of this part, maybe someone else can suggest a way.
However, what you want can be done in 2 other ways:
1. Build 2 reports. Both reports will just be duplicates of each other, only difference being that the 'LoV where clause' will be different. Now you can fire the appropriate report in many ways. For example, if the customer is alreay logged inside your custom application, and therefore you already know whether the user is internal of external, you can design your button or link which launches the report to contain logic such that one of the 2 reports is fired depending on who the user is.
1. Use a JSP parameter form, not a paper parameter form In this case, just build an HTML parameter form in the web source of your report. Use Java logic to populate the LoV drop-down list. When you have to launch the final report, just launch the paper-layout of the report. For example (you will have to modify this):
<form action="http://machine:port/reports/rwservlet?report=ParamForm.jsp+..." name="First" method="post">
<select name="selected_customer" onChange="First.submit()" >
<option value="">Choose a Customer Name
<rw:foreach id="G_cust_id" src="G_cust_id">
<rw:getValue id="myCustId" src="CUSTOMER_ID"/>
<rw:getValue id="myCustName" src="CUSTOMER_NAME"/>
<option value="<%=myCustId%>"><%=myCustName%>
</rw:foreach>
</select>
</form>
In the code above, you will have to make sure that your report's data model defines 2 CUSTOMER_ID's (like CUSTOMER_ID_INT and CUSTOMER_ID_EXT). These 2 will be internal and external Cust ID's. Use Java logic to show one of them.
Navneet.

How to hide the Parameter field during Run time?

Hi,
How to hide the Parameter field during Run time?
I have a parameter field which behaves differently depending on the User logged in.
I am using reports 10G
For ex: I have 3 field created in JSP
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user = 'SUPER show all the parameter
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user is 'GATEKEEPER" Just show
PROVIDER
FROM DATE
END DATE
Can I do that?
Please help
Thanks.
KK

hi, i'm not familiar much with JSP. but i think workaround is to create two window one which have 4 fields and the other which have 3. if user is SUPER then call the first screen otherwise if user is GATEKEEPER then call the second screen.

How to hide/show reports region with radio group selections

Hi, I have an HTML region with a radio group of two choices (Rpt1 and Rpt2). Also got two other report regions which depend on the radio group selections and by pressing a button it will display records.
Everything does work perfect BUT say I select Rpt1 and press the report button it will show the records and after that if I select the Rpt2 radio button I still see the result of Rpt1 records. How can I clear or hide the reports regions when I change my radio button selection?
Thank you
-iahmadi

Hi,
You can create HTML regions that do not need to contain anything at all (use the "No Template" region template to ensure that you don't see a region Title on the page).
However, in order to get this region to be displayed until the Report button is clicked, you would need to have a hidden page item (called, say, P1_SHOW_REPORT) that has, as a default, 0 as a value. The branch that is triggered by the Report button would then set this item to 1 - so, 0 = hide and 1 = show
On your page you should have a branch that is conditional on the Report button being clicked. On this branch, set the first "Set these items" to P1_SHOW_REPORT and "With these values" to *1*. You should also have a branch on the page that is unconditional - meaning that it can be triggered by anything that submits the page. Firstly, this branch should have a high Sequence Number (say, 99) and secondly, should should set the value of P1_SHOW_REPORT to *0*. So the Report button sets it to 1 and anything else (which will include the radio button selections) will reset it to 0.
Now, on your regions you have to change the conditions slightly as we now have two conditions to check - which report has been selected and whether or not the Report button has been clicked.
This can be done by using a SQL Exists condition of something like:
SELECT 1 FROM DUAL WHERE :P1_SHOW_REPORT = 1 AND :P1_RADIO = 'ABC'(where ABC is the value for the radio button for the report
The "blank" region would also have a condition - that would be a simple Item = Expression 1 condition of P1_SHOW_REPORT = 0
Andy

How to grow the report of customer's openitem with sales order

How to grow the report of customer's open item with sales order?
Now we can get the customer's open item with invoice No easily,but our end user need the the customer's open item also with sales order .And because a invoice to multi sales orders. I can do nothing.
Now I have a idea that a develivey No with one sales order , and one invoice with a sales order's develivery ,then one inovice to one sales order . I want to know if other company have use this idea. Or have other solution for my problem.

Hi Yuzhou Yang ,
Yes you are right. In FI transaction you can get the sales invoice wise , reference field of the header data.
As you are aware that while creating a sales order , no FI entry is generated.
In my opinion you can get the required report through customization.
Thanks
D.K.Lakshmi narayana

Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regards

You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards

How to find the report for the SAP query (Query exists in table AQLQCAT)

Hello Experts,
I need to find the tables used in the SAP Query but i don't have access to transaction SQ01,SQ02 and SQ03 to check the same.
Therefore i checked table AQLQCAT and got the SAP Queries in the system. Then searched for the reports that would have been generated for the same passing AQusergroupquery name* in transaction SE38.
But unfortunately the program does not exists for the given paramenter.
Could you please let me know how to get the report name for the SAP Query.
Secondly please suggest any other way of checking the tables used in the SAP Query.
Also the table name from where i can download the SAP Queries.
Thanks in advance.
Regards,
Rahul Sinha

I suggest you a simple method.
Execute the query. When the selection screen is showed, go to menu and click to SYSTEM->STATUS.
Check the program name and double click it to access the program code.
Search for tables or functions into the source code in order to understand where data are taken.
If you do not find anything , go to the program atttribute and check for logic database, sometimes they are used....
Best regards.

How to hide the report

Similar Messages

Maybe you are looking for