How to hide track points?

Is there a way to hide these? I find they are more in the way than useful:
Example
Especially problematic here, where I follow Adolfo's advice and Alt+Drag the trackers
Ingvarai

Thanks,
I appreciate both answers, in this case Todd's solution is what I am after. I do want to see the trackers, it is the path that comes in the way, I want to hide the path.
Seems like I can do it here too, under Preferences:

Similar Messages

How to Hide Track changes according to Specific user?

Hello All,
     We are developing plugin and we have to hide the changes according to specific user. We are setting the track change preferences using the methods provided by ITrackChangeAppSettings interface.
     But as this interface is aggregated on kWorkspaceBoss it is applying the changes for all users.
     Will anyone please suggest how can I apply changes according to particular users? any help is appretiated.
Thanks & Regards,
Praveen

Hello All,
           For hiding the tracked changes according to particular user,i have accept the changes according to specific user.But i have undo the changes it means before saving i have to undo the accepted changes.I am using VOS_RedlineObject::UndoSimpleChange() method but it is not working.
            Can anyone tell me other way for doing that?
Thanks & Regards,
Megha

How do I get more motion tracking points in analyzation?

Hi Everyone,
I am having the problem that when I try to stabilize footage in AF3, the analyzation points that are created are at least half as much as see in tutorials done with the same footage online. Why is that? How can I create more analyzation points? When I say analyzation points they come in the form form of generated anchor points in the timeline.
-Digital_Toronto
The below is an example where I noticed I wasn't getting the same amount of analyzation points, as the tutorial in After Effects I tried to replicate below:
http://www.videocopilot.net/tutorials/stabilize_shaky_footage/

Hi Aldolfo,
Thanks for the response. Actually what I did is I went through Andrew tutorial myself to
see if I could do it exactly as he did. What I found in tracking the same footage used
in the tutorial, I got maybe 1/3 of the tracking points. Somehow I don't think this is
normal and that's why I wondering how I can increase the track points or find out
what's wrong.
- Digitial_Toronto

How to disable IBM Thinkpad 600X's tracking point ?!

To whom it may concern:
How are you? This is Daniel. I have an IBM Thinkpad 600X notebook. The tracking point already doesn't work. I want to disable it and use an external mouse. Could you please give me a favor how to solve this problem? According to IBM manual, "Holding F1 and turn on the system, then modify its BIOS !!!". I already try serval times, but this method doesn't work, the screen always show me "ERROR CODE 8611" at first, and then automatically enter into Windows XP system. NEVER SHOW ME ITS BIOS MANUAL !!!. I think perhaps there has an another HOTKEY to wake up the BIOS. I am looking forward to your help. Have a good day.
With best regards,
Daniel

Yes, it can be hard to gain access to the BIOS when the Trackpoint error (8611) occurs. About the best thing I can suggest, short of removing the keyboard, would be to hold down the F1 key, while at the same time applying constant pressure on the Trackpoint in one direction (up, down, left or right) before you turn the laptop on. Continue to hold the F1 key and applying pressure on the Trackpoint while the system boots. You should eventually see the Easy-Setup (BIOS) menu. Then you can release the key and Trackpoint. Note that you may not be able to select the BIOS menu options with the Trackpoint; use the arrow key instead. When the selected option is highlighted, press the Enter key.
To (semi-)permanently disable the Trackpoint you need to access the "Config" menu and then press the CTRL-D key. That will bring up a hexadecimal display, "System Configuration Edit Utility". You then need to change the value in the third row and first column (i.e., offset 200) from the "02" that is already there to "01". Again, use the arrow keys to move the cursor to that location and then type in 01. Once that's done, press the F2 key (Save) and the screen will flash and the cursor will return to the 000 location. Then press the Escape key twice. That will put you back to the main BIOS display. Use the arrow keys and select the Restart option and confirm it.
The Trackpoint should stay disabled until you reset the BIOS. That's what I mean by semi-permanently. If for any reason you need to re-enable the Trackpoint at a later date, change the "01" back to "02" or simply choose the Initialize option in the BIOS Config menu.
edit: I had forgotten that I set up a web site with this information awhile back
http://www.kawakami-ca.com/ibm_600x/disable_trackpoint/
Message Edited by rkawakami on 05-22-2009 06:20 PM
Ray Kawakami
X22;X24;X31;X41;X41T;X60;X60s;X61s;X300;X301;Z60m;Z61t;Z61p;560Z;600E;600X;T21;T22;T23;T41;R50;A21p;A22p;A31 and A31p
Not a Lenovo employee; just a volunteer helping out here
All personal links to PC-Doctor software removed 8/2012 by mfg request

How do you add the motion path of a tracking point to a separate clone stamp?

How do you add the motion path of a tracking point to a clone stamp without the clone stamp assuming the same initial/continuous positions of the tracking point?
Is there a way to keep the clone stamp's initial position and then add the path onto it?
I am using the clone stamp to remove unwanted duct tape that was used to keep lights on a wall.

I have spent two days trying to find a solution to this exact same problem. I have seen some overly complex solutions that probably work but trying to figure out the explanations is like trying to understand someone describe drag coefficients of rotary wing aircraft. While I am sure they work, they are way above my comprehension. I wanted an intuitive and straight forward solution for something that shouldn't require some arcane technique to fix.
What I did:
1) I used the Clone Stamp tool to paint over the spot on the wall I wanted to remove.
2) picked a more easily discernible point of reference for Tracking. In my case, I used a poster on the wall.
3) As per the instructions here, https://www.video2brain.com/en/lessons/removing-an-object-with-clone-stamp, I pasted the Attach Point data from the Tracker into Clone -> Transform - > Position
However, that didn't work for me as the object I was painting was not the object I was tracking. The solution from the video was simply moving my cloned spot to the tracked object instead of leaving it where I wanted it. So...
4) I then manually adjusted the Anchor Point of the Clone back to the original spot I wanted to cover.
I played footage and the cloned region successfully moved with the spot I was covering.
This is what I was able to figure out. I'm not an advanced user. I only use After Effects every couple of months when I need to fix minor things in footage, so I've only learned to use what techniques I need for the job at hand. No doubt, experienced users may shake their heads at my simplistic fix. I'm sure my technique would be wholly inadequate for situations far more complex than fixing spots on a gray wall, which is why my eyeballs cross when reading suggestions that seem way more involved than one would expect for something as seemingly minor as this. It's just a spot! It should be super easy to remove, right? Well, that's what I was looking for and that's what I came up with. I hope it helps.

How do I track motion on a video with inconsistent track points?

I have a video of a teacher in front of a chalk board. There is one camera motion when the teacher walks from one side of the chalk board to the other. I want to add graphics on the chalk board and make it look like they are pinned on the board. What's the most accurate way to track this motion for my graphics? I'm a real newb to motion tracking and actually haven't been successful at it so this one may take some extra explaining for me.
One think I tried was using the motion tracking behavior and I placed three track points at the bottom left, top left, and top right of the chalk board. I couldn't ad one on the top right because the teacher was in the way and at one point, the teacher walks in front of the bottom left motion track point, confusing it and loosing focus on what it's tracking. Am I making this harder than it has to be or can it be done accurately?
Here are a couple frames to show the (simple) panning from the right of the chalk board to the left. Other than this pan, the rest of the footage is still.

I don't do MAC's, but have you contacted their tech support?
I had this same problem on a PC notebook (TOSHIBA) which didn't have the TILDE key. One program I had needed the TILDE key for a major, often used function. The issue never got resolved.
expeditonwest

Button is generated at runtime how to hide it in WD4A

Hi Experts,
i am using SAles processing application thru Portal , there i have Customer search in the customer search iview i want to hide create sales order button.
i found the technical details by using personalization option
Technical Information for UI Element
General Information About the Application and Component
Application: POWL
Web Dynpro Component: SALV_WD_TABLE
Window Information: TABLE
View Information: VIEW_TABLE
Configuration ID: O200705080740527294200
Information on Field
Field ID: F_CREA
Type of UI Element: TOOLBAR_BUTTON
UI Element Library: STANDARD
Attributes of UI Element
List of Attributes
Attribute Name Value Context Path Type
COLLAPSIBLE
DESIGN standard (00)
EXPLANATION
TEXT Create Sales Order
IMAGE_FIRST X
IMAGE_SOURCE
TEXT_DIRECTION inherit (02)
ENABLED
TOOLTIP
VISIBLE visible (02)
ON_ACTION
VALUE_HELP_KIND
VALUE_HELP
what i found is Create sales order button is generated dynamic at runtime , how to hide dynamic generated button.

Hi,
First you need to figure out where the button is being dynamically generated. Then you can use the enhancement framework to hide the button (Change the visibility of the button) once it is generated. The enhancement framework allows you to add code at certain positions within the application. You will have to find a point after the button is generated.
Hope this helps
Wenonah

HOW TO HIDE FIELDS IN A CUSTOM TABLE

Hi all,
I've a requirement where there's a maintainence view attached to a custom created table. Whenever I add new entries via View, on saving the record, 2 of its fields only should appear.
For example, if my table looks like this,
SAP ID OBJECT ID FROM DATE TO DATE
Once i add a new record, when i press save, only 2 of fields say, SAP id and Object Id should appear instead of all the fields.
Can someone throw light on this if you're aware? Any input in this regard will be highly valuable to me and appreciated. If someone is unable to intrepret this question, do let me know, I'll detail it again.
Thanks in Advance,
Vaishnavi Varadarajan

hi Vaishu,
Hide parameter / select option in selection screen
We can Hide parameter / select option in selection screen dynamically by manipulating screen object.
SCREEN is like an internal table with a header line. However, you do not have to declare it in your program. Go to debugging mode and then view structure of screen.
You can modify SCREEN in your ABAP program during the PBO event of a screen. Its contents override the static attributes of the screen fields for a single screen call. The only statements that you can use with SCREEN are:
LOOP AT SCREEN.
MODIFY SCREEN.
ENDLOOP.
We can hide parameter by set screen-active to 0.
Here is example of how to hide parameter in selection screen. Write it, and change click on radiobutton to hide parameter.
REPORT ZAALGAL0006.
DATA: d_ucomm LIKE sy-ucomm.
PARAMETERS: p_grpa1(10) MODIF ID A,
p_grpa2(5) MODIF ID A,
p_grpb1(2) MODIF ID B.
PARAMETERS: p_actA RADIOBUTTON GROUP rad1 USER-COMMAND ACT DEFAULT 'X',
p_actB RADIOBUTTON GROUP rad1.
AT SELECTION-SCREEN.
d_ucomm = sy-ucomm.
AT SELECTION-SCREEN OUTPUT.
LOOP AT screen.
IF p_actA = 'X'.
IF screen-group1 = 'B'.
screen-active = 0.
ENDIF.
ELSEIF p_actB = 'X'.
IF screen-group1 = 'A'.
screen-active = 0.
ENDIF.
ENDIF.
MODIFY screen.
ENDLOOP.
START-OF-SELECTION.......
pls refer the below sites for reference. they may help you
http://www.blogtoplist.com/software/blogdetails-14026.html
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html
https:/.../servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/905e3d36-0301-0010-30ac-b55865545635
thanks
sagar
reward me points if usefull

How to hide the view latest instance option for the reports in XIR3

Created an access level and denied the rights "view document instances" and "view document instances that the user owns" in the access level.
Applied this access level for a particular group on a particular folder.
Login to Infoview and when view the history,there are no instances for a particular report under that folder.
But we could still see the 'View Latest instance' option in the properties of the report and when click on it,we are able to view the report.
As per the security assigned,the user should only be able to view the instances owned by him.
Plz help me how to hide the option in INFOVIEW

In 9.3.1 (not sure about 9.2) there is a table in your BIPlus repository which stores preferences/profile information, however, having a user simply log in to WA doesn't appear to automatically create a row for them in this table. (So this may not be a viable solution to your situation, I'm still looking for one myself.) This table stores lots of preference info such as whether or not to show the Main Menu, Toolbar, Masthead, etc. by default.
To hide the View Pane, edit the data in the SHOW_INFO_PANEL column, change it from a 1 to a 0 and for that user the View Pane will not longer appear by default.
HYA_USER_PREFS
But again, this only works if you already see the user in the table otherwise I guess maybe they have to 'touch' their Preference before it creates an entry in that table. Haven't figured that part out yet, and Support didn't have any information.
If anyone has found a way to maneuver through the table structures I'd love to hear any insight you can offer.
Before you make any changes to the data in this table be sure to take adequate repository backups, and use caution as usual.
I'm going to create a Shared Preference and have each user point to it the first time they log in - but then you lose the ability for each user to have their own personal folder as their default, so it's still not the ideal solution. Really wish there was a way for Admins to set certain prefs. A coworker reminded me under 7.? or 6.x things like View Pane were system-level settings which was easy to control, but now it's at the user level.
Good luck,
Karen

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

How to hide this method?

I want to use Protection Proxy Pattern,but I feel nervous about my
real method,how can i hide it(such as set it friendly or protected)?
you can see this code:
interface Safe{
     public String getSecret();
class RealSafe implements Safe{
     public String getSecret(){
          return new String("You can get the secret");
class ProtectionProxy implements Safe{
     private String password=null;
     public ProtectionProxy(String temp){
          password=temp;
     public String getSecret(){
          if(password.equals("I have the rights")){
               RealSafe realobj=new RealSafe();
               return realobj.getSecret();
          else{
               return new String("Illegal password,You can't get the secret");
How to hide the getSecret() in class RealSafe with the precondition of using Protection Proxy Pattern???????
How can i do? i need your help,please!

You can't prevent a malicious developer constructing an instance of RealSafe. They could always decompile your application and make changes to it if they wanted anyway!
The ProtectionProxy is really just a convenience for users of your API. It provides "reasonable" security through a means of determining whether the current user has access to the data. It does not provide a means of determining whether the current developer has access to it!
Your proxy lays down the rules for accessing the class being proxied. This works when the client application plays by the rules (as most applications do).
So all you need to do is make sure that developers who play by the rules can't construct an instance of RealSafe:
public class SafeFactory
public static Safe getSafe(...)
    Safe safe = new RealSafe(...);
    return new ProtectionProxy(safe);
class RealSafe implements Safe
RealSafe(...)
class ProtectedSafe implements Safe
private Safe safe;
ProtectedSafe(Safe safe)
    this.safe = safe;
}Thus the only way for a developer to get hold of an instance of Safe is to use SafeFactory.getSafe which always returns a ProtectedSafe.
Make sure you don't mistake this sort of pattern for robust security, though. It simply allows your client application to catch "UnauthorizedExceptions" and react accordingly. As pointed out in this thread there're various ways of getting at the data that's hiding inside a Proxy. If you're really concerned about preventing someone viewing your data unless they are authorised you need to either encrypt it or only load it (and not cache it) when their credentials have been provided.
Hope this helps.

HOW TO HIDE THE SLIN ERRORS

how to hide the slin errors

Hi Shilpa.
I would like to suggest my opinion,
Refered from,
[SAP HELP Library - Standard Reference for Errors and Warnings|http://help.sap.com/saphelp_nw04s/helpdata/en/43/00c5b7daf15166e10000000a1553f6/content.htm]
SLIN Infos point to possible (semantic) program errors. According to the situation, the program should be changed or the messages should be switched off.+
+Only the SLIN messages of this category can be switched off by means of special comments
Reference,
Use u201C#EC * to hide warnings from places that cannot be removed by proper typing.
[SDN Library - Standard Reference - PDF - Make ABAP code unicode enabled - Hide SLIN Error Messages|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c031aa90-0201-0010-b69d-88a278e158c8]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Disable Fast User Switching for RDP (NOT HIDE ENTRY POINTS!)

Windows 7 Pro.
I do virtually all my administration of 150 workstations (various domains and workgroups) remotely via RDP, and with Windows 7, I am finding more and more complications with Fast User Switching. Anything running under another user account may well
interfere with what I need to do: it may slow me down by consuming system resources, or it may, in fact, lock files that I need to remove or update.
When I log on remotely via RDP, I am notified that another user is logged on, but I have no option to log the other user off. If I then attempt to update a program that the other user has open, it may not update correctly because the other user has files
in use. I have been told I can use WMI to force another user logoff. I could probably run shutdown -i and force the user off (but, of course, that might log me off as well). However, this is not a good approach; when I run updates, I typically connect to anywhere
from five to 30 workstations simultaneously, and by the time I get logged onto all of them, I have no idea which had other users logged on and which did not. I would have to repeat on each of 30 workstations just to find out. I need a way to force-logoff the
other user during my logon process.
In the middle of running software installation, I may disconnect (NOT LOGOFF) from a workstation, take it to another site, then reconnect to the station to finish the installation. I may even just walk away from my computer for 15 minutes while updates are
running. If a non-administrative user attempts to logon, it asks me for permission, but allows the user to logon if I do not manually deny it. All non-administrators must be automatically denied logon when I am logged on.
It seems that disabling Fast User Switching would do this, but every time I have posted anywhere on the issue, I get another set of instructions on how to hide the entry points for Fast User Switching. That may work well for managing local logons
but fails miserably to protect my administrative environment.

Hi Brian,
Base on the KB article 279765
How To Use the Fast User Switching Feature in Windows XP, when not using Fast User Switching (FUS) and a non-administrator is logged on, a member of the Administrators
group can establish a remote desktop connection and has the ability to logon to the machine locally and gets a prompt to logoff previous logged on user. When an administrator is logged, any member of the Administrators group may establish a remote desktop
connection. If a non-administrator attempts to connect, you may receive the following error message:
“The user <Domain or Computer Name>\<username> is currently logged on to this computer. Only the current user or an administrator can
log on to this computer.”
In Windows 7, if the Fast User Switching is turned off, the Administrator cannot attempt to login locally. Administrator can do a Remote Desktop Session
to the Windows 7 machine and put his credentials. Once he attempts to login, he gets a prompt that looks like below.
“Once Administrator clicks on Yes, the User1’s session is disconnected.”
After logging in, Administrator can launch the Task Manager, click on “Users” tab and logoff User1. The prerequisite for the Administrator
to be able to do a Remote desktop session to the Windows 7 machine is to enable Remote Desktop services on the Windows7 machine.
In the interim, when the Administrator is logged in and has not attempted to logoff User1 yet, if User2 tries to login, the Administrator will get a
prompt that looks like below.
“If the Administrator clicks OK, User2 will be allowed to login and the Administrator’s session will be disconnected.”
This is a known issue.
Regards,
Sabrina
This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.

How to hide a number on cucm 8.5

Hi guys,
I'd like to know how to hide the number of the caller on cucm 8.5
I'm not a pro, could someone explain to me step by step please
Thank you for ur time
Regards

OK, if you want to change this for all calls simply adjust "Calling Line ID Presentation" to RESTRICTED on
all Route Patterns pointing to PSTN. If you want to do this only for some users you will need to copy all the route patterns and assign them different partition reachable from that phone.
If you want it to work on demend, i.e users dial *67 followed by the number to block caller ID, copy the existing route patterns and add *67 to the front and set this "Calling Line ID Presentation" to RESTRICTED.
HTH, please rate all useful posts!
Chris

How to scale tracket points in After Effects?

Hello
I have 4 moving points tracked around my mouth.
Now i want to animate a toy-figur's mouth with my trackpoints.
My tracked points are much bigger than the mouth on the figure.
How can i scale down the trackpoint to fit to the figures mouth?
Thanks for your help

You are going to have to tell us more about your project. How did you track? Track Points don't have size, they are points. I'm just guessing here that you need to tie four points on the tracked mouth with 4 points on the toy. I'd attach each of the track points to a null named for each area of the mouth. IOW, left corner, upper lip, right corner, lower lip. I'd then attach all of these track points to a null by parenting them. Let's call that null mouthController. Then I'd position the mouth controller and scale the mouth controller to fit the toy. Now I'd attach the appropriate corners to whatever you are using to adjust the mouth of the toy. There are lots of options here so you'll have to give us more specific information before I can give you a concrete suggestion.
Come to think of it you might want to take a look at this brilant system my friend Mathias Möhl came up with. You can get it at AE Scripts. It's called Auto Lip Sync and it's truly amazing.

How to hide track points?

Similar Messages

Maybe you are looking for