How to hire 24 employees really fast?

HI experts,
We have to do some testing in QA and I have been asked to hire 24 employees with different PAs, employee group and stuff. since many infotypes can be be same for one set of employee e.g. IT 7,8,41,167,168,169,171 378 etc. so what is the quickest way to do it.
its gonna be like this
8 union
8 non-union
8 salaried
Thanks,
Rashmi

If Rashmi only has this on paper, then it has to be entered into the file anyway.
Might as well use PA20 for 24 employees. I don't see the scalability yet for invoking a migration procedure?
Regarding "rude earlier", I think this HCM forum needs stricter moderation and you just happened to catch me at the top of the stack after reading some of the other "link-farms" and "ponits-hunting" advice.
No offense intended, but when people are discouraged from searching themselves and then asking more specific (and better) questions, then they become lazy.
Some discipline is required:
-> Read the question carefully.
--> Dont rush in to answer because of points.
---> Encourage high quality questions...
> Benefit from higher quality discussions about the aspects of the question.
If link-farms are the answer to a question, then that is not the intention of these professional forums.
Thank you for responding. Please also take a look at the little yellow triangle in the menu bar. If you notice posts which are not usefull for improving the quality of contributions to the forum, them please use it and add a comment about why you are reporting it (preferably with a link to the thread ID).
The moderators will then reject the link-farms, mail-chains, interview-questions, etc.
We also comb the forums anyway, but HCM seems to be lagging behind as far as "expert forums" are concerned.
Please help the moderators by useing the "Abuse Report" button to catch quality problems quickly.
Many thanks for your help,
Julius

Similar Messages

How to hire Employee in master data from e-recruitment?

Without going in to PA48 manually? can we do it automated?
Here my both systems ie e-recruiting and sap (hr-master system) are isolated.

Hello Krishna,
let's assume you can process the hiring action with the information e-recruiting is handing to the HR system. I'd probably do it the following way (might be a bit oldschool but should work).
PA48 is nothing else than another entry to hr actions. So you could start recording a hiring action as batch input and fill in all fields you have from T752F easily by doing PA30.
When you have the batch you just take the coding as base for a report which reads T752F and gets all information to a employee Id. With this information you build a batch input table and then call PA30 and pass the batch input table which should process the complete hiring without screen interaction. After the call returns to your program you delete the datasets from T752F. Do this in a loop for all numbers.
You can even run different actions for hiring and org. change as you can check if the employee Id from the table already exists.
Plan the report as batch job and it should do what you want.
If you do not want to start delayed via batch job you could make a workflow on completing the data transfer or any other manuel activity. The workflow would call a function module via rfc, hand the data from e-recruiting to the function module which basically does the same as the report for the single candidate. The workflow would be triggered by just setting the activity to completed, the table T752F would not be used.
This solution might be not the most elegant but should work, assuming you have all needed data of course. In my field of work this would not work as e-recruiting does not supply enough data to process the hiring action, so an admin has to do it via PA48 and add everything needed.
Best Regards
Roman Weise

How to hire new employee (BAPI, BDC, IDoc/ALE...???)

Dear ladies and gentlemen,
I was asked to create an interface that would "hire employee" and I failed to find nice function module that would do that.
Could you, please, share your ideas/experience about how to solve this?
Best regards
Momkic
Message marked as a qustion in order to award the points.
Momkic

Hi
Transaction code "PA40" is OK to handle "Actions" about the personnel for isolated entries.
However if you want to use BDC for bulk data transfer, then use "PA30" to record your transaction and build your BDC data. That's because handling "PA40" screen is somehow less suitable since it depends on customizations and is out of screen if there are too much action types.
To trigger an action through "PA30" is achieved by entering "0000" to the infotype field and the action type value ("massn") for the subtype field and pressing "Create" button. This will be better for BDC.
About the BAPI:
I didn't try before but you may use the Business Object "HRMasterDataReplica". It has one class method as "SaveReplicaMultiple" which has an import parameter "EmployeePersonnelAction" for the infotype 0000, "EmployeeOrgAssignment" for the infotype 0001 and
"EmployeePersonalData" for the infotype 0002.
In addition to standard BAPI parameters, at least these three parameters must be filled to create an employee. To trigger other actions you can use the one for "0000".
I would like to learn whether you tried this and achieved. However, it will be the most classical way to use BDC.
*--Serdar

My battery drains really fast and my macbook shuts off without warning when disconnected from power, what is wrong and how can I fix it?

My battery drains really fast and my macbook shuts off without warning basically everytime it is disconnected from power, what is wrong and how can I fix it? also whenever an application is opened the computer freezes and the application will either shut down or make the macbook run really loud.

Charge Information:
Charge remaining (mAh):          1450
Fully charged:          No
Charging:          Yes
Full charge capacity (mAh):          1739
Health Information:
Cycle count:          379
Condition:          Poor
Battery Installed:          Yes
Amperage (mA):          196
Voltage (mV):          12573
I have the 13inch macbook and it is 2 years old (bought august 2009)

HIRE Employee prev to the retro accounting period in payroll record

Hi All,
I have an issue when I try to hire an employee in the system. The system doesn't allow me to hire any employee before Nov 2009 as the retro accounting period for that payroll area is dated to 11 2009.
The retro accounting period changed from 10 2005 to 11 2009, when it did not change for any other payroll area.
Can anyone suggest a solution as how to hire an employee beyond this date?

in one case we can perform this activity why the user will forget to hire an employee who got hired for the previous months
U have to change the Retro date in the control record as per the isssue
ask the client to use the system accurately other wise deleting the control record is not good practice in some cases we can do and we have to do
but this above said shd not be the reason

So I keep trying to sync music to my iPhone from iTunes, and whenever I select the album the sync goes by really fast and nothing goes onto my phone. Then when I click "On this iPhone" it shows the songs, but they're grey, and I can't click on them. Help?

So I keep trying to sync music to my iPhone from iTunes, and whenever I select the album the sync goes by really fast and nothing goes onto my phone. Then when I click "On this iPhone" it shows the songs, but they're grey, and I can't click on them. Help?

Ok, sorry. And yes, I just restored my iPhone as new and tried to put all the songs on there before I even restored with my previous backup, but it still does the same thing... even when I just checked the option to sync only "selected music or videos". How's that possible?
P.S. After I tried syncing with checked songs only, nothing showed up under Music on my phone and this message popped up in iTunes: "The iPhone "..." could not be synced because the sync session failed to finish." If you could, please tell me what that means, thanks.

BEWARE of using stopwatch or timer in iphone 5 under iOS7. As the mili second digit ticks really fast, in a matter of minutes, it will break your LCD under that mili second area. It happened to my iphone5. Let me know if you have same issue.

BEWARE of using stopwatch or timer in iphone 5 under iOS7. As the mili second digit ticks really fast, in a matter of minutes, it will break your LCD under that mili second area. It happened to my iphone5. Let me know if you have same issue.

You two are obviously talking about the LCD pixels being killed. What exactly does it look like?
How many minutes are you talking about, 2 to 3, 5 to 7 or more?
Where was the brightness control at for the both of you?
KOT

Times moves really fast EFFECT in Final Cut Pro

I want to know how to do the effect used in Paranormal Activity. Like this (http://www.youtube.com/watch?v=F_UxLEqd074) at 0:40 seconds. This time moves really fast, implying that time is going by really fast. How do you do this?

At :40 I see the camera pointing downstairs in the living room. I don't see what you are meaning. But typically this effect is done by either shooting timelapse...meaning one frame every few seconds or minutes. If you can't shoot timelapse, simply shoot the same things for a loooooong time, then adjust the speed of the slip by a few hundred or thousand percent.
Shane

SSHD is really fast on MPB 15" 2011?

Hi everyone,
It's my first post here and I'm not a native speaker, so sorry about my english
Well, after read a lot of post about SSHD drives, I just want to know your opinions about this drives, I mean, about how real fast it is after using for a while, because when you install the OS for first time the drive is not really faster but everybody says the more time you use the disk, more fastest can be.... It's convenient buy one of these drives?
I want to install one of these for my MBP 15" early 2011 (2,0Ghz - 8GB Ram)
Thanks in advance!

I have a Seagate 1 TB SSHD in the late 2011 MBP. Boot and shutoff times have been reduced by well over 50% compared to a HGST 7200 rpm. 1 TB HDD. It seems to be quicker on often visited web sites and activities.
For the very modest price increase over a conventional HDD, I think it warrants serious consideration.
Ciao.

REALLY fast stop motion..HELP!

So I am trying to make a stop motion using imovie 09 and it wont let me make the clips shorter then .1 seconds...does anybody know how I can make them shorter? I am trying to make this REALLY fast...Help!! This is for a major film project I am working on. All help would be greatly appreciated! Thanks.

hjsami01 wrote:
So I am trying to make a stop motion using imovie 09 and it wont let me make the clips shorter then .1 seconds...
that's right. for smooth stop-motion, you need 1 frame per second.
you need tools as QuicktimePro vers7, which allows to convert a folder of pics into a smooth stream of video, or designated stop-motion tools as framebyframe (free) or iStopMotion ($$, therefor much more elaborated&convenient).
and Welcome, hjsami01, to the  boards ...

My computer is 3 1/2 months old and my battery is dying really fast what can I do to increase the battery life??

My computer is 3 1/2 months old and my battery is dying really fast what can I do to increase the battery life?

Hi,
I asssume it's a laptop!
1st I would run it right down & then do a full recharge, then run it down again + a full recharge..
Check that you do not have any apps running in the background, reset PRAM..
When all's done I usually run a movie & time how long the battery lasts..if after that & no joy call Apple Help..

Make gnome3 log in really fast

I like gnome 3 and gnome-shell's way of working, but it's not as fast as I would like when logging in. I use lxdm, because it really is faster than gdm, and I would use xfce, except for the fact that it just doesn't have gnome-shell's overlay. Any ideas on how to get gnome 3 to login really fast?

Wow, e4rat does speed things up! I am going to try that bootchart thing to see how fast, but it is obviously faster! Until I have lxdm start gnome, wonder must be right, because once it appears, everything appears instantly, but it still takes some time to get there. It's not any real big amount, but it is noticeable, and I'd like to get rid of it.

Is network rendering really faster overall?

I'm just getting into network rendering. I've setup 4 machines as the farm. All is well and the image sequence is being processed pretty quickly. However, after rendering out several thousand static PSD frames, I realized I still had to go through the process of converting them to a movie. Importing them into Adobe Media Encoder was relatively easy, but it still took a long time to encode the final output as video. When you factor in the additional step of encoding the movie, I'd estimate a very small amount of time saving through network rendering.
What am I missing? How is this really faster in the end? I'd love to be enlightened. Is there a simple (and much faster way) to go from composition to final h.264 video through network rendering?
Thanks!

Run a test yourself...
Set your three machines to render a PSD sequence, the once it's done use AME on one of them to make an h264.
On the other machine send your composition to AME and render an h264.
In my experience the more computers doing the heavy lifting (ie working out your AE file) the better. Once the image sequence is done the easy bit to process is getting it out into another format.

IPHONE 5s Battery Draining Really Fast

Hi, I have a Iphone 5s. The phone charges really slow, and dies really fast. I am barely on it now since this happen. I tried restoring at home, and also resetting. I took a trip to Apple two days ago, and they ran the diagnostic. He said the battery is healthy but something is wrong with the firmware or software. After he restored it but it still is doing the SAME thing. Could I fix this issue?

Take it back to the Apple store and tell them that didn't fix the issue. You might have a hardware issue. Before you take it back though do a backup on your computer.

IPhone 4 battery drains really fast and phone gets really hot

I have an iPhone 4 and since November 15 my battery has been draining really fast and gets really hot when I use the phone. When I try to charge the phone with my computer it doesn't charge, but only charges with the wall hub. I have tried deleting the email accounts, deleting all apps, restoring with the backup, restoring without the backup, and still no luck. I went to the Apple store and they briefly looked at it and said it had water damage by looking at the water damage indicator in the charging port. They told me I needed to pay $150 for a new phone. I don't recall getting my phone getting wet and it seems to work fine except for the battery drain and the computer charging problem. iTunes still recognizes the phone. I thought it was a battery problem so I ordered a new battery and replaced it myself and the battery was still draining fast. When I had the phone open the other water damage indicators were still white (no water damage), it was just the charging port indicator that was red (water damaged). Also, when I charge my phone with the wall hub it charges very slowly. I have ran out of ideas and I could really use some suggestions. Thank you.

i looked on the right there is no solution to my problem.i charge my phone to 100% after 2 hours with no usage at all of the phone with 3G off with wifi off with all applications shut down all notifications and locations off battery goes down to 50% when it was running on the older ios never had this problem in my iphone.when will this problem solved

How to hire 24 employees really fast?

Similar Messages

Maybe you are looking for