How to hook up 3 monitors to macbook pro?

Hey people,
I have searched for hours trying to find the best solution for hooking up three external monitors to my macbook pro (mid 2010).
The only serious (not homemade) solution is the Matrox TripleHead2Go DP Edition, but this solution only gives me a max resolution of 4080x768 (3x 1360x768).
Unfortunately I dont believe that would be enough to satisfy me needs.
I dont think Im the first one struggling with this problem, any solution will be much appreciated!
tl;dr:
Need to hook 3 monitors up to my macbook pro (mid 2010), whats the best solution?

Thunderbolt-capable Macs, with discrete AMD Radeon graphics can support up to TWO connected Apple Thunderbolt Displays.
MacBook Pro (15-inch and 17-inch, Early 2011) and later
iMac (Mid 2011)2
Mac mini (Mid 2011), 2.5 GHz3
All others can only support one external directly, usually based on a Mini DisplayPort with an adapter.
You could use two of these, but reports are they are "laggy":
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/

Similar Messages

  • How to connect an external monitor to macbook pro. The monitor has no usb connector without a usb

    How to connect an external monitor to macbook pro. The monitor has no usb connecter, only a port.

    Most MacBook Pro models have a Mini DVI port, a Mini DisplayPort or a ThunderBolt port for connecting an external display. USB does not have enough bandwidth to support a responsive display connection.
    What model MacBook Pro do you have, by year, CPU speed or MacBook Pro 3.1 designation?

  • How to mirror to tv monitor using macbook pro 2012

    how to mirror to tv monitor using macbook pro 2012.  The airplay is not displayed anywhere except I Tunes which only plays what is on I Tunes.

    Howdy there nell a-7,
    It sounds like you are not seeing the Airplay icon in the menu bar on your Mac but you do see it in iTunes. I would use these steps from the following article to help troubleshoot the issue:
    iOS: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215
    Try these steps first
    Verify that your iOS device's software is up to date.
    Verify your Apple TV's software is up to date.
    Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
    All AirPlay-enabled devices must be connected to the same Wi-Fi network.
    Some Wi-Fi network configurations offer a Guest Network. On your Apple TV, go to Settings > General >Network and ensure that you're connecting to the same Wi-Fi network on your iOS device. On your iOS device, tap Setting > Wi-Fi and confirm that this matches your Apple TV.
    If the AirPlay icon doesn't appear
    Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.If you are still unable to see the AirPlay icon  , try one of the following steps:
    If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
    Check Internet or network connectivity on all affected devices.
    Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
    If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
    Here is some additional information about Airplay for Mac:
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/HT5404
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • How do I hook up dual monitors to Macbook Pro

    Looking to run dual monitors with a Macbook Pro. How many adapters am I going to end up getting to run both monitors?

    same question want to run dual monitors  Dell P2414H 24" Dual Monitor with my macbook pro...
    dell configuration is as follows.
    Connectivity:
    1x USB 2.0 (Upstream)
    3x USB 2.0 (Downstream)
    1x DVI-D
    1x DisplayPort
    what adapters should i get?

  • I want to hook up two monitors to MacBook Pro

    I just bought a 2014 MacBook Pro with 1 Firewire800 port; 1 thunderbolt port; 2 USB ports. I want to hook up two monitors. Can I connect the MacBook Pro to a hub via Firewire800 port on laptop to Firewire800 port on hub? That would leave me two Thunderbolt ports on hub to connect the two monitors?

    Chipper, welcome to the forum.
    When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • How do i clean spots on monitor of macbook pro with retina display?

    how do i clean spots on monitor of macbook pro with retina display?

    Light alcohol cleaners, like what you use for camers lenses, works.  Just do not have the soft cloth cleaning pad dripping wet ... dripping wet will allow fluid to get onto internal components.

  • How do I hook up external speaker to macbook pro

    How do I hook up external speaker to macbook pro?

    The external speaker needs to be active - have it's own power source and amplifier - then you can just hook it up with an appropriate cable from the headphone output socket of the Mac.  If you want to go wireless, you would need to get an Airport Express - probably overkill - or get a bluetooth dongle that could be hooked to the speakers input.
    If the external speaker is passive, you would need to attach it to a HiFi and hook the Mac up to the input of the HiFi.

  • Why did my external HD monitor go blank after working fine while hooked up to a new MacBook Pro?

    Why did my external HD monitor go blank after working fine while hooked up to a new MacBook Pro? I have the Moshi adapter and HDMI hooked up to the 27 inch monitor. It was working fine and when I came back after lunch the monitor was blank but the MacBook Pro screen was fine. Could it be the adapter?

    could be, try powering down the mac, with the exmonitor connected and see if it is recognized

  • Using an HDMI cable to connect to a monitor from Macbook Pro, but no sound

    I just purchased a HP2159 HD monitor, and hooked it up to my macbook pro via an HDMI cable, but there is no sound. Can anyone help me?

    Dan Waylonis wrote:
    does anyone know how to properly set up the audio cable?
    What do you mean by "properly setup?" There is no setup. Just plug it in.

  • How do I get facetime on a MacBook Pro to work?  I keep getting a " server encountered problem during registration.." message.  I have FaceTime ver. 1.1.1

    How do I get facetime on a MacBook Pro to work?  I keep getting a " server encountered problem during registration.." message.  I have FaceTime ver. 1.1.1
    Thanks

    Icapper wrote:
    I will end up getting something other than Logitech speakers, since I'm just weird like that.
    Your not weird, your a audiophile.
    https://en.wikipedia.org/wiki/Audiophile
    Good sound costs money. And with a 5.1 system your usually doing surround sound decoding for BlueRay movies etc. for home theater purposes.
    The PC 5.1 surround sound systems require a audio card in a PC tower and mainly used for playing 3D games so that won't work for any Mac at all. So don't buy a PC 5.1 surround sound system for your Mac.
    Harmon Kardon has the GoPlay, it's a portable stereo with awesome sound (not as good as their theater systems) and you can hook up a analog male/male stereo mini cable to it from the Mac.
    $200 and it has a iPod dock and also takes like 8 batteries so it's portable.
    http://www.amazon.com/dp/B002GHBTNC
    There is also the Bose Wave clock/radio, you will need a stereo mini to RCA break out cable for that.
    http://www.bose.com/controller?url=/shop_online/wave_systems/index.jsp
    The GoPlay has much better sound than the Bose, I think the Bose are overpriced.

  • How do I play video from my macbook pro to my tv?

    How do I play video from my macbook pro to my tv?

    What model MacBook Pro do you have? On my late 2011, I used to use a Mini DisplayPort/Thunderbolt to HDMI adapter to get video and audio from my Mac to my television. I used this adapter from Monoprice. Worked great - I just no longer use it because I bought a 27" monitor.
    You can also use AirPlay mirroring if you've the right MBP and an Apple TV - but the wired method works, too.
    Clinton

  • Need help connecting Dell U2713HM monitor to MacBook Pro

    What is the best way to connect a Dell U2713HM monitor to MacBook Pro OS 10.7.5 to maximize the resolution 2560 x 1440? I was using a VGA adapter on my old Viewsonic monitor that hooked into the Thunderbolt port, I think. When I use my old adapter with the new Dell monitor, it stops my Mac from responding and the monitor says it has no DVI connection. When I unplug the adapter from my Mac, it starts working again.  I'm not very good with all these port options and descriptions so talk real slow, please.

    1 Dual Link Digital Visual Interface connectors (DVI-D) with HDCP
    1 DisplayPort 1.2 (DP)
    1 High Definition Multimedia Interface (HDMI)
    1 Video Graphics Array (VGA)
    1 USB 3.0 upstream port
    4 USB 3.0 downstream ports
    Thank you!

  • How should I connect yamaha HS50m to macbook pro

    how should I connect yamaha HS50m to macbook pro? Does macbook pro with i7 processored have an enough sound card for yamaha studio monitors?or will I need an external sound card or mixer?

    Some mikes have sufficient output to connect to this port, Alexey, but most don't. the solution, if you really want to use this particular mic, is to obtain a small battery or mains powered pre-amplifier to connect between the microphone and the line -in input. Alternatively there are devices which will allow you to connect your existing mic through the USB port. If you have an amplifier with a mic input already you could also use this as an intermediary, though it won't be very portable, of course!
    You may find it cheaper to simply buy either a USB or "line level" mic, though.
    Cheers
    Rod
    Cheers
    Rod

  • How can i stream media wirelessly from macbook pro ? video...

    how can i stream media wirelessly from macbook pro mountain lion to dynex bluray player or insignia mhl tv? i also have a time capsule...

    most reliable method found is get an AppleTV hooked to TV, and get program called BEAMER (free trial or $15 purchase application).     Lots of programs CAN stream to TV via wifi, but many of them get audio syncing wrong/bad.   Best addition upgrade to any Apple PC or laptop isnt internal, but the AppleTV     BEAMER app is the best Apple/Mac app out there to me, ...  Ive got 7 Terabytes of Videos, ...the Beamer app takes in any video format, its just incredible.

  • How do I migrate from a 2008 MacBook Pro without a screen to new 2014 MacBook Pro?

    How do I migrate from a 2008 MacBook Pro without a video screen to a 2014 Macbook Pro?

    Use your backup drive instead. No backup drive, then get a monitor and connect it to your computer. Or take the whole shebang to the Apple Store for help with the transfer. Or you can remove the drive from the old MBP and put it in an external enclosure.

Maybe you are looking for

  • Outgoing Payment PLD (Link)

    Hi, How to give link in outgoing payment PLD? Thanks & regards, Mohit Soni

  • Aperture 3 and Capture NX 2

    I'm evaluating both trial versions of Aperture 3 and Nikon's Capture NX 2. I shoot with a Nikon D90, and I'm trying to develop a consistent workflow which might use the best features of both Aperture 3 and Capture NX 2. I also tend to shoot a lot of

  • How to divide SMP Hybrid application in to modules?

    Hi Experts,       Is there any way to divide the SMP Hybrid Application into modules? like if i did login functionality, and one of my colleague did a attachment viewer functionality. Is it possible to integrate the two functionalities in single proj

  • Moving first interface to Production

    Hi frineds, After completing the interface in development  i have to move the complete interface to production. And i have one query i need to change the CC before exporting ( Mean the values of production system). Or after moving to production we ha

  • Doubt about Fitting

    Hi everybody  i have a little doubt about the "Linear Fit .vi"; i see the help page and i undestand that it takes a set of value X and Y and makes out the best fitting of the Y value. I tried to use it in a project and: In the first block (the upper