How to hook up an HP 8500A printer to a Samsung tab 3 tablet

How do I hook up my HP 8500 A to my Samsung tab 3 tablet? Thank you. Carol

Hi,
Please try:
https://play.google.com/store/apps/details?id=com.hp.android.print&hl=en
or
https://play.google.com/store/apps/details?id=com.hp.android.print
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Printing from a samsung 4 tablet

How do I get my Hewlett Packard 6500a wireless printer to print from my Samsung 4 tablet.it appears that it is installed but I can'tell print

Hi,
Please use the following app on your Samsung:
https://play.google.com/store/apps/details?id=com.hp.android.print&hl=en
also check:
http://www.hp.com/united-states/campaigns/mobility/?jumpid=va_r11400_eprint#android-tab-samsung
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I print from my Samsung tab 2 to my HP 6600 printer

How do I print from my galaxy 2 tablet to my HP 6600 printer

Samsung has hard-coded the "Print" command on their devices to look for a Samsung printer.
As most of us who read the instructions for ePrint already know, the ePrint app works via the Android "share" command. You share the file you want to print to the ePrint app. It doesn't replace the hard-coded command on Samsung devices.
Printing an email is a snap. Create a contact entry named "Printer", then give it the email address you received from hpconnected.com. Forward any email you want to print to " Printer". Done.
This assumes you have an ePrint-capable printer, and have followed the directions to register the printer correctly.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Wireless Printing to from Samsung Tab 3 to HP Photosmart 5520

Why is it I can wirelessly print to my HP5520 from the Tmemo app on my Samsung Tab 3 by utilising the 'Print' option in the 'Menu' button, but can't print an email from the email App.
I can't find a print icon anywhere?

Hi,
Are they on a same network ? You have to use HP ePrint app to print. You can also use HP AiO Remote to print but ou need email address of your printer. Please use Google Play/Store to install those apps.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
Once the printer is configured to join the network, it is always connected to the network. No further configuration is required.

How do hook up printer

I don't know how do hook my iPad up to my computer please help

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

How do i hook up my hp photosmart printer to my hp pavilion dv7-1260us?

How do I hook up my hp photosmart printer to work online with my hp pavilion laptop dv7-1260us? I hooked it up and it will not relay to the printer to print. I have the USB cable hooked up and the main elec plug hooked up to the wall outlet. I also tried installing the disk by downloading it and it would not copy it. What can I do? Can it work with my laptop?

PamelaPress wrote:
How do I hook up my hp photosmart printer to work online with my hp pavilion laptop dv7-1260us? I hooked it up and it will not relay to the printer to print. I have the USB cable hooked up and the main elec plug hooked up to the wall outlet. I also tried installing the disk by downloading it and it would not copy it. What can I do? Can it work with my laptop?

I just got a wireless printer and we followed the directions on how to hook it up to the iPad. Somehow it seems as if we hooed it up to the wrong printer. How do we disconnect this printer from the iPad so that we can connect the correct printer?

I just got a wireless printer and we followed the directions on how to hook it up to the iPad. Somehow it seems as if we hooked it up to the wrong printer. How do we disconnect this printer from the iPad so that we can connect the correct printer?

AirPrint finds any air print enabled printers on your wifi network, and won't find any printers that are not. So if you print from, say, safari, and it finds that printer, then that is your printer. It may have a different name than you were expecting.
Turn the printer off, and see if the print job still sees the printer. That will confirm that the one it sees is yours.
What happens when you send the print job?
If you are sharing a wifi network with others, and one of them has a AirPrint printer on the network, you will see that one. There is not way to have it forget one, so you will need to know your printer from the other printer, and select the right one.

How to set up my MAC to print on XP wireless Router

Is there a site out here where I can get detailed instructions (in proper sequence) to get my wife's brand new laptop to print on shared network We have an XP laptop and desktop. Desktop is hooked up to a hp2175 printer. I had no problems using the wireless router to access the internet, but now I'm really at a lost of how to get the mac to print like my XP laptop.
Any help and detailed guidance is appreciated.

1. Set it up with the iCloud options in System Preferences. I am not sure you will get a mac.com address unless you alrady have one, probably a .icloud.com
2. I have used it for 6 years and I am happy with it.
3. Don't know.

HP Officejet Pro 8500a prints slowly over wireless on Cisco Linksys Smart Wi-Fi Router EA6500

I have the HP Officejet Pro 8500a. I recenrly change my wiress router to the Cisco Linksys Smart Wi-Fi Router EA6500.
Nearly every time I print, the documement remains "pending" for at least several minutes, sometimes as long as 20, until it finally starts printing. Once it starts printing, the document is printed quickly.
It doesn't matter the size of the document and the time it remains "pending." I've done test pages with just the word "test" in a Microsoft Word document, and it will remain in "pending" for well over five minutes.
If I print over the USB cord, there are no delays.
I need help. I can't figure out how to remedy this long delay when printing wirelessly.
On a side note in case this is helpful, the Linksys router does have a priority setting where you can select up to three devices for priority access (faster connection?), which seems to be more for bandwidth-intensive devices. I tried adding both the laptop I'm printing from and the printer to this priority list, but that did not improve the print connection speed.
Advice please! Thank you.

Hi Jim-Gr,
I understand you have an Officejet 8500A that has started printing very slowly after switching routers. I'm sorry to hear this has happened but will certainly do my best to assist you.
I appreciate you advising that you have tried connecting the printer via USB and it does make a huge difference. I'm also assuming your previous router didn't go this slowly either. With the things you have tried, my assumption is that it's a setting in the router that needs to be changed. If you're not sure how to change things in your router you can generally call the router company and they will walk you through it.
First you will want to ask them if there are any firmware updates for your router, if there are have them perform the update. If it is up to date already then have them make sure your router is broadcasting at a frequency of 2.4 GHz as that's the only frequency the printer works with.
Second, you will want to make sure the following ports are open:
UDP: 427, 161, 137, 138
TCP: 9100, 9220, 9500, 137, 139, 427
Once all of this is updated, then I would suggest you power cycle everything (turn off the printer and the PC, pull the power on the router for 30 seconds and then turn the other two back on once lights are back to normal) and try again. This should allow your printing speed to go back to normal
Hope this helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

How to hook up Power Mac G4 to my i.Mac

Been browsing through discussions and Apple stuff, talked to support techs at Apple Care (with less than desired results), but still need help on how to do this.
Here's what I want to do: Get step-by-step instructions on how to hook up an "old" (think it was made in 1999) Power Mac G4 to my i.Mac computer.
a) primarily to serve as back-up for my documents, pictures, music, etc., even programs if that can be done, and;
b) actually use some of the old programs that are on that old G4 (i.e. Adobe Pagemaker)
Here's what I have:
1) a flat-panel i.Mac, 1 GHz PowerPC G4, 256 MB DDR SDRAM, using Panther;
2) an old Power Mac G4 (the rather large, vertical hard drive) of which I know nothing about the specs....like memory, storage, or system it has, etc......at least until I can get into it. It's been sitting idle for about four years;
3) a three-foot, 6-pin to 6-pin cable (Belkin) which I am told is what I need to connect the two computers via FireWire jacks.
So, presuming I have all that is needed to hook these two machines up, how do I proceed. A "1, 2, 3 instruction would be very much appreciated.
For example, should both computers be turned on "before" inserting the FireWire cable, or......should just the i.Mac be turned on, then insert the cable, then turn on the old Mac?
Once hooked up, and powered up, it's my understanding I'll see on icon for the old Mac on my i.Mac desktop. To copy files, I'm supposed to just drag and drop to the old Mac icon. Is that right?
Then to actually use the old Mac, I'm supposed to reboot my i.Mac, then hold down the "t" key just after the reboot "sound," or little circling icon, and I'll be in the old Mac? The screen will show everything on the "old" Mac? Is this right? Sounds simple enough, but.
If this is right and I'm actually in the old Mac, can I then sort and arrange documents I've dragged and dropped, and can I use programs that are already on that old Mac......like Pagemaker?
And, how do I get "out" of the old Mac and back into my i.Mac?
I see through discussions that I can apparently backup my entire i.Mac hard drive by going to the HD finder window and dragging and dropping my user folder icon (the little one that appears at the top and in the center of the Finder window, to the old Mac icon. Does that sound right?
I surely would appreciate some help on this. What I've got so far is piecemeal tidbits, nonsequential, and often, unclear.
Thanking anybody and everybody who might be inclined to help me out.

Thank you A Brody,
This is all very helpful to a guy like me.
I guess the first thing I'll have to do is get an ethernet cable. Presumably, the FireWire cable will not be needed now. Correct?
The same questions still seem to apply. I did print out the "Connecting two computers using Ethernet" that you forwarded to me.
1) But, do I power up both computers before installing Ethernet cable?
2) After following instructions on the"Connecting two computers....." will an icon appear for the old Power Mac?
3) After hooking up the Ethernet cable, do I have to re-boot, use the "T" key, to get into the old Power Mac?
4) After fiddling around on the old Power Mac, how do I get out of there and back onto my i.Mac?
5) Or, because it would be hooked up via Ethernet, could I simply go back and forth between the two computers?
By the way, after checking out your info on how to identify my old Power Mac, this is the info I've been able to glean, I think:
The old Power Mac is:
• A Power Mac G4 (PCI Graphics)........and therefore, it says, not able to serve as a target computer backup with my i.Mac
• Apparently made in 1999
• System, apparently, is OS 8.6 (my i.Mac is OS X 10.3.9...Panther)
• Model number either M7631 or M7826 (can't find it on the computer)
• Memory: PC 100 SDRAM, up to 1 GB (don't know how much it has now)
• I have no idea how much storage is available (i.e. my i.Mac is 74.5 GB (I think)
Thanking you again

How do I update OfficeJet Pro 8500A eAiO

How do I update OfficeJet Pro 8500A eAiO to AirPrint from the iPhone4S?

Hi,
Drivers for your printer can be found from link below.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=2512009&task=&
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How to connect my cannon mx470 series printer with bluetooth to my mini mac?

how to connect my cannon mx470 series printer with Bluetooth to my mini mac

Does the printer actually support BlueTooth? If the printer is wireless, then most likely it uses Wi-Fi. Did you read the user guide that came with it? Or contact Canon tech support at their website.

After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w? How can I get this set up to print?

After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.

From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5)

How do I install a Adobe pdf printer?

Upgrade from Acrobat Pro X to Pro XI destroyed my prior Adobe pdf printer. How do I reinstall the printer instance without reinstalling Acrobat XI?
I found a reply for an earlier version of Acrobat, but I have no interest in installing the PDF printer into \Desktop or \Documents. Whatever it said to do didn't work and I've received no reply to my question posted on that old thread.
So, how do I recreate the Adobe PDF printer, and, how do I do so while selecting where I want the .pdf files to be located?
Thanks in advance for help

What OS are you running? If it is a version of Windows, is it 32 or 64 bit? Are you using 11.0.0? Did you reboot after the install? If you did not reboot, then do that first. The next step is to run a repair and then do the updates (XI is currently at 11.0.03). Both the Repair and the Updates can be run from the Help menu.

How to hook up an HP 8500A printer to a Samsung tab 3 tablet

Similar Messages

Maybe you are looking for