How to Horizontally Arrange Radio Buttons

Is there a way to arrange radio buttons in form central horizontally, rather than the default vertical arrangement?

Add Item ~ single choice field ~ that will drop a couple of radio buttons in, stacked vertically ~ hover mouse over the right side dotted border around the whole element and you should see two short vertical bars appear, which indicate you can stretch the border to the right ~ left click and drag the dotted border to the right (allow plenty of space) ~ look at the 'Field Properties' on the right hand side ~ untick 'stack choices vertically'.
Hope that makes sense - it does work, honest, so if you have a problem it's my poor explanation, so come back to me.

Similar Messages

How to create a radio button on OA Page using Personalization

I am trying to create a radio button on OA Page using Personalization. The item style , I can see is Message Radio Group.
How to create Message Radio Button and bring them under one group.
Thanks

You should use jdev to define a radiogroup and radio buttons under that, wrap that definition inside a stackLayout in jdev, use personalization to add a stackLayout and extend the region which you had created earlier in jdev.

How to use a radio button in enabling/disabling a text box in report progra

Hi,
    Could any please let me know, how to use a radio button in enabling/disabling a text box in report program.

*& Report ZMR_RADIO_BUTTONS
REPORT ZMR_RADIO_BUTTONS.
PARAMETERS : R1 RADIOBUTTON GROUP G1,
             R2 RADIOBUTTON GROUP G1.
PARAMETERS : A1 TYPE I,
             A2 TYPE I.
AT SELECTION-SCREEN OUTPUT.
*initialization.
IF R1 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 0.
ENDIF.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 1.
ENDIF.
ENDLOOP.
ENDIF.
IF R2 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 1.
ENDIF.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 0.
ENDIF.
modify screen.
ENDLOOP.
ENDIF.
START-OF-SELECTION.
*IF R1 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
   SCREEN-ACTIVE = 1.
ENDIF.
*ENDLOOP.
*ENDIF.
*IF R2 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
   SCREEN-ACTIVE = 0.
ENDIF.
*ENDLOOP.
*ENDIF.

How to create a radio button in ALV Reports

Hi all,
Best wishes to all..
Kindly reply me to this question... that is "How to create a radio button in ALV Report"
Thanks and Regards
Anjali

HI
here is an example :
PROGRAM ZUS_SDN_BCALV_GRID_DEMO_2.
Based on: BCALV_GRID_DEMO.
TYPE-POOLS: icon.
TYPES: BEGIN OF ty_s_sflight.
INCLUDE TYPE sflight.
TYPES: button1    TYPE lvc_emphsz.
TYPES: button2    TYPE lvc_emphsz.
TYPES: button3    TYPE lvc_emphsz.
TYPES: button4    TYPE lvc_emphsz.
TYPES: END OF ty_s_sflight.
DATA:
gt_sflight    TYPE STANDARD TABLE OF ty_s_sflight,
gt_fcat       TYPE lvc_t_fcat.
DATA: ok_code LIKE sy-ucomm,
     gt_sflight TYPE TABLE OF sflight,
      g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
      grid1 TYPE REF TO cl_gui_alv_grid,
      g_custom_container TYPE REF TO cl_gui_custom_container.
      CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
    CLASS-DATA:
      md_cnt    TYPE i.
    CLASS-METHODS:
      handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
        IMPORTING
          e_row_id
          e_column_id
          es_row_no
          sender.
ENDCLASS.                    "lcl_eventhandler DEFINITION
      CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
define local data
    FIELD-SYMBOLS:
      <ls_entry>    TYPE ty_s_sflight,
      <ld_fld>      TYPE ANY.
    READ TABLE gt_sflight ASSIGNING <ls_entry> INDEX es_row_no-row_id.
    CHECK ( <ls_entry> IS ASSIGNED ).
Set all radio buttons "unselected"
    <ls_entry>-button1 = icon_wd_radio_button_empty.
    <ls_entry>-button2 = icon_wd_radio_button_empty.
    <ls_entry>-button3 = icon_wd_radio_button_empty.
    <ls_entry>-button4 = icon_wd_radio_button_empty.
    ASSIGN COMPONENT e_column_id-fieldname OF STRUCTURE <ls_entry>
                                              TO <ld_fld>.
    IF ( <ld_fld> IS ASSIGNED ).
    Set selected radio button "selected".
      <ld_fld> = icon_wd_radio_button.
    ENDIF.
Force PAI followed by refresh of table display in PBO
    CALL METHOD cl_gui_cfw=>set_new_ok_code
      EXPORTING
        new_code = 'DUMMY'
     IMPORTING
       RC       =
ENDMETHOD.                    "handle_hotspot_click
ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
      MAIN                                                          *
PERFORM select_data.
CALL SCREEN 100.
      MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF g_custom_container IS INITIAL.
    CREATE OBJECT g_custom_container
           EXPORTING container_name = g_container.
    CREATE OBJECT grid1
           EXPORTING i_parent = g_custom_container.
    PERFORM build_fieldcatalog.
    CALL METHOD grid1->set_table_for_first_display
     EXPORTING
       i_structure_name = 'SFLIGHT'
      CHANGING
        it_fieldcatalog = gt_fcat
        it_outtab        = gt_sflight.
Set event handler for event TOOLBAR
    SET HANDLER:
      lcl_eventhandler=>handle_hotspot_click FOR grid1.
else.
    CALL METHOD grid1->refresh_table_display
     EXPORTING
       IS_STABLE      =
       I_SOFT_REFRESH =
      EXCEPTIONS
        FINISHED       = 1
        others         = 2.
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
ENDMODULE.                    "PBO OUTPUT
      MODULE PAI INPUT                                              *
MODULE pai INPUT.
to react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
    WHEN 'EXIT'.
      PERFORM exit_program.
    WHEN OTHERS.
    do nothing
ENDCASE.
CLEAR ok_code.
ENDMODULE.                    "PAI INPUT
      FORM EXIT_PROGRAM                                             *
FORM exit_program.
CALL METHOD G_CUSTOM_CONTAINER->FREE.
CALL METHOD CL_GUI_CFW=>FLUSH.
LEAVE PROGRAM.
ENDFORM.                    "EXIT_PROGRAM
*&      Form BUILD_FIELDCATALOG
      text
--> p1        text
<-- p2        text
FORM build_fieldcatalog .
define local data
DATA:
    ls_fcat        TYPE lvc_s_fcat,
    ls_hype        TYPE lvc_s_hype.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
    I_BUFFER_ACTIVE              =
      i_structure_name             = 'LVC_S_FCAT'
    I_CLIENT_NEVER_DISPLAY       = 'X'
    I_BYPASSING_BUFFER           =
    I_INTERNAL_TABNAME           =
    CHANGING
      ct_fieldcat                  = gt_fcat
    EXCEPTIONS
      inconsistent_interface       = 1
      program_error                = 2
      OTHERS                       = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DELETE gt_fcat WHERE ( fieldname <> 'EMPHASIZE' ).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
    I_BUFFER_ACTIVE              =
      i_structure_name             = 'SFLIGHT'
    I_CLIENT_NEVER_DISPLAY       = 'X'
    I_BYPASSING_BUFFER           =
    I_INTERNAL_TABNAME           =
    CHANGING
      ct_fieldcat                  = gt_fcat
    EXCEPTIONS
      inconsistent_interface       = 1
      program_error                = 2
      OTHERS                       = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_fcat INTO ls_fcat
       WITH KEY fieldname = 'EMPHASIZE'.
IF ( syst-subrc = 0 ).
    DELETE gt_fcat INDEX syst-tabix.
ENDIF.
ls_fcat-fieldname = 'BUTTON4'.
ls_fcat-icon    = 'X'.
ls_fcat-hotspot = 'X'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON3'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON2'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON1'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
LOOP AT gt_fcat INTO ls_fcat.
    ls_fcat-col_pos = syst-tabix.
    MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDLOOP.
ENDFORM.                    " BUILD_FIELDCATALOG
*&      Form SELECT_DATA
      text
--> p1        text
<-- p2        text
FORM select_data .
define local data
DATA:
    ls_sflight    TYPE ty_s_sflight.
SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE gt_sflight.
ls_sflight-button1 = icon_wd_radio_button.
ls_sflight-button2 = icon_wd_radio_button_empty.
ls_sflight-button3 = icon_wd_radio_button_empty.
ls_sflight-button4 = icon_wd_radio_button_empty.
MODIFY gt_sflight FROM ls_sflight
      TRANSPORTING button1 button2 button3 button4
    WHERE ( carrid IS NOT INITIAL ).
ENDFORM.                    " SELECT_DATA
Regards,
Prasanth
Reward all helpful answers

How can i get Radio buttons and parameters in a Single Straight Line

Hi Experts,
How can i get Radio buttons and parameters in a Single Straight Line...
Example:
   r1 r2 p1 p2.....
Cheers,
Priya
Points granted.

Write the following code for the selection screen:
DECLARATION OF PARAMETERS.
SELECTION-SCREEN: BEGIN OF BLOCK select WITH FRAME TITLE text-001,
                  BEGIN OF LINE.
                  SELECTION-SCREEN COMMENT 1(10) FOR FIELD p_detail.
                  PARAMETERS p_detail RADIOBUTTON GROUP r1 DEFAULT 'X'.
                  SELECTION-SCREEN COMMENT 25(10) FOR FIELD p_summry.
                  PARAMETERS p_summry RADIOBUTTON GROUP r1.
SELECTION-SCREEN: END OF LINE,
                  END OF BLOCK select.
this will solve your poblem surly. reward the points if you find helpful
Regards,
Siddarth

How to create a radio button in dynpro during runtime?

Hi guys!
How can i create radio buttons in dynpro during runtime??
any ideas?
thanks!!

Hi Thomas,
I think as of now there is no possibility to create a Radio Button Dynamically during runtime. But of course, there is a work around which I feel you can evaluate.
If your business requirement demands that you need to have a Radiobutton, you can use the subscreen to place the Radiobutton and later based on your need you can call that screen to enable that button to the user and to make it available.
Hope this will help.
Thanks,
Samantak.

How to Create a Radio Buttons using Personlization

Hi friends ,
We have requierment like , Wanted to havev two radio buttons Employee Relative : YES or NO values.
These radio buttons I wanted to add on Oracle Provided page using personlization. But the Values for the radio buttons should be YES and another button is No.
After addin it , we shall have this selected value handled in Custom Controller. How can I the radio Buttons with the above YES/No Values. Any guidelines would be greatly helpful.
Thanks Guys
Regards
Raghu

Hi,
Using personalization you can create radio button s, the item style as: Message Radio Button
and then extend the controller and use the below code in processrequest of the extended or custom controller:
OAMessageRadioButtonBean appleButton =
(OAMessageRadioButtonBean)webBean.findChildRecursive("GroupButtonOne"); //First Radio Button
appleButton.setName("Yes");
appleButton.setValue("Yes");
OAMessageRadioButtonBean orangeButton =
(OAMessageRadioButtonBean)webBean.findChildRecursive("GroupButtonTwo"); //Second Radio Button
orangeButton.setName("No");
orangeButton.setValue("No");
May be it will help you.
Regards
Mahesh

How to deselect the Radio button from htmlb.table.TableView

Hi Experts,
Could you please help me, how to seselect the Radio button from htmlb.table.TableView?
<hbj:tableView
                                   id="tbvCustomer"
                                   model="mcBean.csModel"
                                   design="ALTERNATING"
                                   headerVisible="TRUE"
                                   footerVisible="TRUE"
                                   navigationMode="BYPAGE"
                                   selectionMode="SINGLESELECT"
                                   fillUpEmptyRows="FALSE"
                                   headerText="Searchresults"
                                   visibleRowCount="10"
                                   onNavigate="CustomerSearchNavigate"
                                   visibleFirstRow="<%=mcBean.getCsVisibleFirstRow() %>">
Problem: After searching and selecting the Customer in the table, then again we are searching for another customer. After that the searched customer is displaying in the Table. By default the table Radio button is selected. Because for first Customer we have selected the Radio button. How we can deselect the FRadio button while searching for another Customer.
Thanks In Advance.
Regards,
Vijay.

I think it is <2095>.
In SmartForms, go to your text window.
Use the icon on the top left of the text window to switch to the old editor.
INSERT -> CHARACTERS -> SAP ICONS.
Do a FIND on "radio". It's called ICON_WD_RADIO_BUTTON_EMPTY.

How to Create a radio button?

How to Create a radio button with the label Maintenance of RSDDTREXHPAFAIL tab".Once the user chooses this then there will two options
Create and Delete.Table has three fields.When user chooses the create button then it should create a new entry and delete should delete an entry. If the entry exist then create should overwrite an entry. There is no update.

hi...
the sample code below should help you .....
parameters:Maintenance of RSDDTREXHPAFAIL tab radiobutton group grp1.
this will create the radio button on the screen with the lable required.
now in the user command of the screen ..
PROCESS AFTER INPUT.
    MODULE user_command_0100.
MODULE user_command_0100 INPUT.
*assigning the sy-ucomm value to ok_code
ok_code= sy-ucomm.
*clear the sy-ucomm
CLEAR sy-ucomm.
CASE ok_code.
*when user presses CREATE button
    WHEN 'PB_CREATE'.
    if Maintenance of RSDDTREXHPAFAIL tab = 'X'.
      here write query to fetch data into the internal table
     and then use modify command to modify the database.
    endif.
*when user presses CHANGE button
    WHEN 'PB_DELETE'.
   if Maintenance of RSDDTREXHPAFAIL tab = 'X'.
      HERE write the delete query.
   endif.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
<b>plz reward pts if helpful.</b>
regards
vijay

How to link a radio button selection to a submit destination ?

Hi,
I am working on a JSP page. Depending on the check from a radio button on a form, the form will be submitted to a different destination. Does anyone know how to do that? Any code samples?
Thanks!
wyp

This will give you an idea of how it works. Save the file and double click on it to open in IE.
<html>
<head></head>
<body>
<form name="myForm" method="GET" action="servlet/InsertRecords">
<P>
<INPUT TYPE="RADIO" NAME="Radio1" VALUE="1" onClick="onClickFunction(1)" >Insert Record
<BR>
<INPUT TYPE="RADIO" NAME="Radio1" VALUE="2" onClick="onClickFunction(2)" >Delete Record
<BR>
</P>
</form>
</body>
<Script Language="JavaScript">
function onClickFunction(inVar) {
   if (inVar == 1) { document.myForm.action="servlet/InsertRecords";
                     document.myForm.submit(); }
   if (inVar == 2) { document.myForm.action="servlet/DeleteRecords";
                     document.myForm.submit(); }
</script>
</html>

How to create a radio button that changes colors

I'm using Acrobat X and ID CS5 on Mac OS X.
A couple of years ago someone on the forums explained to me how to create a button that changes color with each click. You can view a sample PDF at https://dl.dropboxusercontent.com/u/52882455/colorcycle.pdf. They gave me the document JS and showed me how to set the properties of the button. I've integrated the button into a particular series of PDF forms and it's worked out very well.
Now I would like to do the same thing, but using a circle instead of a square. Can anyone tell me the best way to do this? Can I somehow set a radio button to cycle through colors in the same way? I design my forms initially in ID CS5 and then activate and format the fields in Acrobat X. I've tried using circles instead of squares in my ID document, but when I export to an interactive PDF, they're converted to squares.
Any ideas?

I understand how to make buttons cycle through colors-- the problem I'm having is that I'm trying to figure out how to make a circular button cycle through colors. When I export my ID document to PDF, my round button maintains it's original appearance, but when I click on it to cycle through the colors, it behaves like a square (see new PDF at https://dl.dropboxusercontent.com/u/52882455/colorcycle2.pdf).
If I use a radio button, I can get it to cycle through colors, but I don't want it to have a black dot in the middle. Is there a way to format the radio button to not show the black dot when clicked?

How to specify a radio button as disabled in Net-UI

How do i specify a radio button to be disabled using the net-ui ??
i know i can do it in HTML using
<INPUT TYPE="RADIO" NAME="btn1" VALUE="today" DISABLED>
So what is the Net-UI equivalent to the same ? I could not find much information
in the workshop documentation pertaining to the same
I have my radio button set up as
<netui:radioButtonGroup dataSource="{actionForm.itemSelected}" >
<netui:radioButtonOption value="{pageContext.itemNumber}" labelStyle="right"
>
</netui:radioButtonOption>
how do I specify a disabled property ??? I presume it can be done using labelStyle
but I dont know what to write in it .
Help !! MayDay !! MayDay !!
Thanks
Kar
</netui:radioButtonGroup>

Kar,
The netui:radioButtonOption does not have a disabled attribute. I think your
only option is to use javascript to set disabled to true.
- john
"kar piyush" <[email protected]> wrote in message
news:4087ec3e$[email protected]..
>
How do i specify a radio button to be disabled using the net-ui ??
i know i can do it in HTML using
<INPUT TYPE="RADIO" NAME="btn1" VALUE="today" DISABLED>
So what is the Net-UI equivalent to the same ? I could not find muchinformation
in the workshop documentation pertaining to the same
I have my radio button set up as
<netui:radioButtonGroup dataSource="{actionForm.itemSelected}" >
<netui:radioButtonOption value="{pageContext.itemNumber}"labelStyle="right"
>>
</netui:radioButtonOption>
how do I specify a disabled property ??? I presume it can be done usinglabelStyle
but I dont know what to write in it .
Help !! MayDay !! MayDay !!
Thanks
Kar
</netui:radioButtonGroup>

How to select a radio button using javascript?

Hi,
I have 2 radio buttons as shown below:
<input id="poBoxRadio" name="poBoxRadio" type="radio" class="radio-btn" value="No" /> No
<input id="poBoxRadio" name="poBoxRadio" type="radio" class="radio-btn" value="Yes" /> YesI want to select one of this radio button, according to the following condition in javascript:
<script type="text/javascript">
if (<%=option1%> != ""){
// Radiobutton "No" should be selected.
else if (<%=option2%> != ""){
// Radiobutton "Yes" should be selected.
</script>How can I do this in Javascript? Any help will be highly appreciated.
Thanks,
Rishi

I have solved this issue using the following:
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html>
<head>
<title></title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<script type="text/javascript">
var a='', b='d';
</script>
</head>
<body>
<input id="poBoxRadioNo" name="poBoxRadio" type="radio" class="radio-btn" value="No" /> No
<input id="poBoxRadioYes" name="poBoxRadio" type="radio" class="radio-btn" value="Yes" /> Yes
<script type="text/javascript" defer="defer">

</script>
<input disabled type="button" value="UP" onclick="setVariable('move=1')">
</body>
</html>Thanks to all of you!

How to differentiate between Radio Buttons with the same name?

My form has two fields, to which I gave the same name ("Radio Button 1.0") in order to achieve mutual exclusivity.
Now, I would like to use JavaScript to retrieve the value of one the two fields:
var checkMark = this.getField("Radio Button1.0");
if (checkMark.value == "Yes") {
Questions:
What is the proper way to inspect the value of a Radio Button? I have tried this:
if (checkMark.value == "No") [...]
but it doesn't seem to work.
How can I tell apart 2 radio buttons with the same name?
TIA,
-RFH

When Radio Buttons and Check Boxes are unchecked their value is "Off", so if you have "Yes", "No" buttons you will also encounter an 'Off" value. Now if you want to look at a given button, you will have to use the "isBoxChecked(nWidget)" method.
nWidget:
The 0-based index of an individual radiobutton or checkbox widget for this field. The index is determined by the order in which the individual widgets of this field were created (and is unaffected by tab-order).
Every entry in the Fields panel has a suffix giving this index, for example MyField #0.
Returns
true if the specified widget is currently checked, false otherwise.
Example
var f = this.getField("ChkBox");
if(f.isBoxChecked(0))
app.alert("The Box is Checked");
else
app.alert("The Box is not Checked");

How do I create radio buttons which hide certain fields when selected?

I have a set of two radio buttons, "Yes" and "No"
When the "Yes" radio button is selected, I would like the "Bank Name", "Branch Number", "Institution Number" and the "Account Number" field to all be blocked from entering content into them.
When the "No" button is selected, I would like for all of these fields to be available to be written in.
I can do this currently with check boxes, but the problem with those is that both boxes can be checked at the same time, which is problematic.
How can I make it so that the radio buttons control whether or not the fields can be written in!
Thanks very much!

Yes, I have done this. The buttons are mutually exclusive. The are in the group "Vendor EFT" - one is named "Yes", one is named "No".
When the "Yes" radio button is selected, I would like the "Bank Name", "Branch Number", "Institution Number" and the "Account Number" field to all be blocked from entering content into them.
When the "No" button is selected, I would like for all of these fields to be available to be written in.
Not sure what code needs to be written for this.

How to Horizontally Arrange Radio Buttons

Similar Messages

Maybe you are looking for