How to host JDeveloper 11g web application site

Hi I was wondering if anyone could help me with setting on jdeveloper web application on a web hosting. Also would be willing too pay for some
help.
Thanks Tyler

Jaydeep,
11.1.1.2.0 is a full install and not a patch/upgrade, yes. You should install 11.1.1.2 into a new location (you can easilly have multiple versions of JDeveloper installed at the same time)
John

Similar Messages

  • Custom host-name for web application SharePoint 2010

    I am facing a weird behavior. Can anyone help me regarding this?
    Steps performed:
    1. Created a web application using custom host name.
    2. Created a site collection using "Blank" site template. Nothing issues.
    3. Created another site collection using "Publishing" site template. Authentication prompt came multiple times. IIS logs/Fiddler/HTTP Watch are full with 401 entries.
    4. Added the custom host-name with web server IP in local desktop hosts file(which is in intranet domain). Prompt issue fixed.
    5. Authentication mode set as NTLM. 

    Hi DDasgupta,
    After you created a web application with a custom host name, if you got a prompt for the user and you may face the following issues:
    There is continuous prompt for the credentials
    HTTP 401.1 error
    This shows that there is a problem with the Loopback configuration. This situation should occur only when we access the application from the server machine.
    For fixing the problem, we have to disable the Loopback value inside the registry.Open the Registry Editor (regedit.exe) and locate the following key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa, and create a new Key Value of type DWORD inside
    it and set the value to 1.
    More information, please refer to the link:
    http://www.c-sharpcorner.com/UploadFile/40e97e/sharepoint-2010-creating-host-name-for-web-application/
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to redeploy Calculation Manager Web Application Server

    Hi All,
    I am installing a patch(13925741) for Calculation Manager, i stuck at the following point:
    6. Perform the standard Calculation Manager Web application server deployment task using Hyperion Enterprise Performance Management System Configurator (EPM System Configurator). See the Oracle Hyperion Enterprise Performance Management System Installation and Configuration Guide for instructions.
    I don't know how to redeploy Calculation Manager Web Application Server, plz help me in deploying this.
    The readme for the patch can be found at:
    https://updates.oracle.com/Orion/Services/download?type=readme&aru=15356919#_Toc330987031

    909062 wrote:
    Hi All,
    I am installing a patch(13925741) for Calculation Manager, i stuck at the following point:
    6. Perform the standard Calculation Manager Web application server deployment task using Hyperion Enterprise Performance Management System Configurator (EPM System Configurator). See the Oracle Hyperion Enterprise Performance Management System Installation and Configuration Guide for instructions.
    I don't know how to redeploy Calculation Manager Web Application Server, plz help me in deploying this.
    The readme for the patch can be found at:
    https://updates.oracle.com/Orion/Services/download?type=readme&aru=15356919#_Toc330987031
    Hi,
    Did you actually try to look at the Oracle Hyperion Enterprise Performance Management System Installation and Configuration Guide for instructions as suggested ?
    To redeploy a component, run the configurator that can be found in the start menu under Foundation Services. Then select "modify an existing instance". Then for Calculation manager, check the box "Deploy to application server".
    Thanks,
    JM

  • Is it possible to invoke external REST web service hosted in WebLogic web application from an Adobe LiveCycle Process (ES-4)

    Is it possible to invoke an external REST web-service hosted in WebLogic web application from an Adobe LiveCycle Process (ES-4) with parameters as input and manipulating the response depending on the type of parameters it gets back. Then invoking an Adobe Form and prepopulating the Form based on the response parameters? Do you have sample projects that do this invocation. The part highlighted in red is what I need examples.

    You can simply use "Execute Script" operation in Workbench and make use of java.net.URL. Below links should help :
    http://www.mkyong.com/webservices/jax-rs/restfull-java-client-with-java-net-url/
    http://www.adobe.com/devnet/livecycle/articles/building-xml.html
    http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=000581.html
    Hope this helps.
    -Wasil

  • Book for Web application(site) (Application(site) for voice tutorial) for m

    Please tell me some not very book or example for developing Web application(site) (Application(site) for voice tutorial) for mobile devices what use web services(for the voice tutorial)
    Please(if can ,if can not it's all right) application to be like version for attaching on the web server.

    Use the resources you pay for with a dev account in the iOS Dev Center(s).
    iOS Human Interface Guidelines
    iOS Starting Point
    Start Developing iOS Apps Today
    App Development Overview
    App Store Review Guidelines for iOS Apps
    Your First iOS App
    iTunes Connect Developer Guide
    iTunes Connect Guide
    Learning Objective-C: A Primer
    Also: iTunes U

  • How to to publish php web application with Mysql as database in sharepoint server 2013

    I Have done a PHP web Application which uses html, css,javascript, php, mysql, ajax. now i want to publish this web application in my sharepoint server 2013. I want this site in my company intranet. How can i do this? 

    You can host that site in web server. 
    Use SharePoint page viewer webpart to show content from your PHP site on sharepoint page
    http://office.microsoft.com/en-in/sharepoint-server-help/page-viewer-web-part-HA010024045.aspx
    http://office.microsoft.com/en-in/sharepoint-foundation-help/display-a-web-page-on-a-sharepoint-page-by-adding-the-page-viewer-web-part-HA101857182.aspx

  • How to setup a backup web application in iis When primary application is down

    This is my Scenarios:
    Scenario 1:
    I have a web application(www.abc.com) hosted in IIS windows server 2008 R2. we use the the application over the intranet connected with LAN. we have the same application hosted in IIS in Different Name too.
    Primary : www.abc.com ,  Backup : www.abc1.com
    If the primary application is down for any reason the backup application should handle the request for the primary one.
    How to monitor the Primary application for unexpected DOWN and how to UP the backup automatically ones it detected the down of primary ?
    Scenario 2:
    This scenario is meant of Fail-safe server setup, I googled but can't get a clear brief idea.
    Note : web Application is used inside the organisation . can't accessed via internet
    Same as First Scenario But the the application hosted in two different servers at same location/Different location with different IP address 
    If the primary Server is down for any reason the backup Server should handle the request for the primary one.
    How to monitor the Primary Server for unexpected DOWN and how to UP the backup automatically ones it detected the down of primary ?
    Is there any free tools are available ?
    Kindly provide me solution for these Scenarios .

    Hi Rajakrishnan17
    1. Your question is more suited for Windows Server forum, not for Windows 7.
    2. What you try to achieve cannot be configured with out-of-the-box features in Windows 7.
    3. You may try to see if Network LoadBbalancing (NLB) feature in Windows Server 2008 and later fits your requirements.

  • How to publish a sharepoint web application to internet for external users.

    Hi
    how to publish a share point site to internet,
    In test server : we branded a publishing enabled site and uploaded content and want to publish for internet users
    we have a production sharepont server,
    1) how to configure alternate access mappings in default zone,internet zone when we create new web application in prod share point server.
    adil

    For internet publishing ifyou want or need change the authentication method you need to EXTEND the website and enable the CLAIM authentication so the user can login using a HTML form for username and password.
    SharePoint make a url parsing to identify the content
    to display so you need to explain all the server name used for contacting the WebApplication. You can use 5 different name for the same server
    (AAM Alternate Access Mapping).
    N.B. http and https are different name (AAM Alternate Access Mapping)Lorenzo
    LSo Lorenzo Soncini Trento TN - Italy

  • Adding a secure, internal-only SharePoint Web application / Site collection in existing farm

    Hi,
    We are currently working on creating a new internal-only SharePoint site that will host sensitive information. We are planning the architecture to provide a secure environment to host this information in SharePoint. We will create the new web app on a separate
    database with encryption enabled TDE; we are also planning to encrypt the data through the SharePoint (Insert third-party vendor here) forms before it gets to the SP DB. And obviously, SharePoint permissions will be set accordingly.
    Additionally, we would like to have the site accessible
    only through our internal network and keep it off the DMZ.
    Our current SharePoint environment consists of two web-front end servers (load-balanced) externally exposed (DMZ), one application server and the SQL server both behind the DMZ (internal-only). Currently all of our SharePoint web apps are accessible externally
    through SSL.
    What is the best way to accomodate this new internal-only web application within our existing farm providing the security measures explained before?
    I am thinking  on adding an extra WFE server to the existing farm and put it behind the DMZ (internal-only) in a similar way as our application server is configured right now, but just serving exclusively this new internal site's content. I would then
    have the NEtwork guys to make the site accessible only to users logged-in internally in our network and through this new dedicated server only. My concern is that since all of our other web apps in the farm are exposed externally, and since the new server
    would be part of the same farm, that could be open doors for bad guys to access this information. Are there any other topology options I should consider? I have thought about creating a small (one-server only) new farm just for this purpose, but I am trying
    to avoid going that route.
    Any thoughts?
    Thank you,
    Rob

    You're mostly going down the right track.
    A new web application in dedicated SQL DB and web application policies to deny all external accounts access to the sites will go a long way. You can also make sure that the DNS does not resolve externally.
    If you want security you will probably be building the web application on https alone, which is my preference for any farms these days. That might negate the need for your encrypted infopath system.
    However you cannot add a WFE to a farm and dedicate a web app soley to that server. Any server with the SharePoint Foundation Web Application role will host all web applications. You can steer traffic to one
    server or another but that's not really doing much for security. If it's on one WFE it's on them all. For that reason I would say that the standalone farm is the best, most secure, solution.
    All of what you've been describing will help with security but you'll have to spend hours testing connections, securing files and testing testing testing.  Whilst the standalone will just work.
    No, i don't know why that turned into tiny print either.

  • Send data to JMS queue using CQL in Jdeveloper 11g CEP application

    ALTER QUERY q_basic_event ADD DESTINATION
    “<EndPointReference><Address>_file:///home/cep/test.txt</Add
    ress></EndPointReference>" ---- CQL is being used to transfer data to an output file(test.txt).
    How do we change the destination so that the data is sent to a JMS queue in Jdeveloper 11g where we are using a CEP application?

    Hi Narayanan,
    Thank you for your prompt reply. I understand that we need to create an external delivery channel to post the message to a JMS Queue from TP2. Currently I am using default AQ's (b2b.IP_IN_QUEUE & b2b.IP_OUT_QUEUE) at TP2 end to receive the message.
    But, I want to post the message to JMS Queue. For this I need to create an external delivery channel and the corresponding end point should be the name of that JMS Queue. Is my assumption correct?
    I have already gone through the thread that you have mentioned and the pdf as well. But, I am not able to find an option on how & where to create that JMS Queue?
    Could you clarify on this?
    Regards,
    Satya.

  • How are permissions applied between Web Applications and from Service Applications?

    I'm quite confused about how permissions are applied to Content Databases in relation to service accounts. So, as an example, I have two web applications - Intranet whose service account is DOMAIN\sps_webapp_default - and My Sites whose service account is
    DOMAIN\sps_webapp_social.  The "sps_webapp_social" account has full control (through User Policy) to the Intranet web app.
    When I go to My Sites> Sites> Suggested Links and click on any suggestions I get the below error and the site is not "followed".  This Content Database sits under the Intranet web app which the sps_webapp_social has full control to.
    I'm also getting similar permission issues when the account that runs various service applications tries to connect to the DB (such as workflow service).  This is happening to new or migrated sites.  I know permissions can be applied directly
    in SQL but this can't be the way to do it? 
    Is there a simple reason why these permissions aren't propagating through?

    I resolved my issue. I deleted the Work Management Service Application and created it again - this time, I made sure the IIS Pool (I created its own application pool) service account running this was the same as the My Site service account. 
    So, running under DOMAIN\sps_webapp_social.  This seemed to clear up all of my permissions issues being thrown up in Event Viewer too.
    My Sites really is a complicated beast...  I'm getting there.  Hopefully this helps somebody else!

  • How do I define my web application path in Tomcat6

    Hi friends,
    Can anybody tell me how to define and where to define my web-application path in tomcat 6 server?
    I absolutely don't want to change any files inside tomcat6\conf\ folder (like its server.xml or context.xml)
    My problem comes in the following scenario:
    i) My Webapplication path is c:\tomcat6\webapps\test-servletii) I have one html form file registration.html in c:\tomcat6\webapps\test-servlet\registration.htmliii) I have a form processing servlet in path c:\tomcat6\webapps\test-servlet\WEB-INF\classes\pkg_register\Process_Registration.classiv) web.xml file inside WEB-INF\ has contents
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <web-app xmlns="http://java.sun.com/xml/ns/javaee"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
       version="2.5">    
    <servlet>
         <servlet-name>Process_Registration</servlet-name>
         <servlet-class>pkg_register.Process_Registration</servlet-class>     
    </servlet>
    <servlet-mapping>
         <servlet-name>Process_Registration</servlet-name>
         <url-pattern>/Process_Registration</url-pattern>
    </servlet-mapping>
    </web-app>PROBLEM : In html <form action="/test-servlet/Process_Registration"> works fine.
    But every time I don't want to give my web application folder name in URLs( not in web.xml or in form action, it should be default relative path).
    I want to give just, <form action="/Process_Registration"> in registration.html file's form action.
    Any help is appreciated.
    Thanks.
    ---Sujoy

    Thanks...
    It solved the problem by putting <form action="Process_Registration"> instead of <form action="/Process_Registration">When I was using <form action="/Process_Registration"> it was directly taking me to
    http://localhost:8888/Process_Registration .
    But, now when i use <form action="Process_Registration"> it takes me to
    http://localhost:8888/test-servlet/Process_Registration which IS CORRECT.
    But, still i don't know why the <form action="/Process_Registration"> was taking me out of my current webapplication path. It should have given me ERROR.
    --Sujoy                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How do you get the web application path from the servlet?

    I have created a web application which is installed in
    /webapps/myApplication
    /webapps/myApplication/data/users.xml
    /webapps/myApplication/WEB-INF/classes/myServlet
    How can you get the path to the "users.xml" file from the "myServlet" file?
    The code below doen's seem to return the xml file. anybody knows why?
    public class myServlet extends HttpServlet {
    public void doGet( HttpServletRequest req, HttpServletResponse res ) throws ServletException, IOException
    File myXmlFile = new File("/data/users.xml");

    Try this..
    String FileName = getServletContext().getRealPath("\\data\\users.xml");
    File myXmlFile = new File(FileName);
    hope this helps..

  • How can I develop a web application using EJB design pattern?

    I have searched over the web and found quite a lot of tutorials on how to use the EJB design pattern.
    I know that there will be a home interface, EJB object interface and a SessionBean.
    But the tutorials often only cover a single class, this made me unable to get a complete picture of how EJB design pattern can be implemented into a whole system.
    I am now required to devleop an online shopping web application using EJB and JSP page.
    I think I will need to create a lot of classes: Member, ShoppingCart, Product...etc.
    What I want to ask is that, do I need to create a home interface, EJB object interface and a SessionBean for each of these classes?
    I really need some ideas on how to develop this system using EJB + JSP pages.
    Many thanks to you all.

    For every EJB that you want to create, you will need to code a home and remote interface and a bean class.
    You could start getting your ideas here
    http://www.theserverside.com/books/wiley/masteringEJB/
    http://www.coreservlets.com

  • How to use images in Web application, which was written using mod_plsql?

    I need to insert some images in my Web Application. But I don't know how to insert it from BLOB. Please help me to solve this problem. Can you leave me some example.

    Regardles version, this could be a nice start:
    http://download.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/up_dn_files.htm#CJAHDJDA

Maybe you are looking for