How to i calibrate the ipad 2 ?
my ipad 2 needs to be calibrated does anyone know how this can be done?
About Batteries in iDevices
Apple - Batteries
Battery University
Apple - Batteries - iPod
Apple - Batteries - iPhone
Apple - Batteries - iPad
How to Calibrate Your Mac, iPhone, or iPad Battery | MacBlend
Similar Messages
-
How do you calibrate the iPad battery?
How do you calibrate the iPad battery and is it necessary to discharge battery 100%. I have the 3 rd generation iPad, it has been almost a year since I purchased it and the battery when fully charged reads 100%. Recently, I visited my local Jump Plus store and the staff said I should drain the batteries on my iPad & iPhone completely until they are dead and recharge once a month. Is this accurate? It is my understanding that you should not drain the batteries completely? Also, is that the same as calibrating the battery?
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
http://www.apple.com/batteries/ipad.html -
How can I calibrate the iPad 2, thank you
Hi, my iPad doesnt responding on the tuch as it use to in the beginning so I wonder if there is calibration of the screen and where can I find it
Thank youI tried that, including changing the screen protector and restarting the iPad.
A bit disappointed considering I bought it on the day of the lounch 24.04.2011
Thank you anyway
Rosie -
I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?
Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely. -
How can I get the ipad to connect to itunes 10.6.3?
How can I get the ipad to connect to itunes 10.6.3?
The iPad mini requires iTunes 10.7 or newer to sync.
(82182) -
I have 12 iPad 3s that I want to set up to train multiple groups of teachers on in anticipation of purchasing classroom sets eventually. I am looking for suggestions in how to set up the iPads to be used by multiple users.
Managing Multiple iPads/iPods in a School Setting
http://courses.moodleshare.com/course/view.php?id=162
Cheers, Tom -
How do you add the ipad device to your itunes account? Please!!
How do you add the ipad 2 device to your itunes account
There is no need to add the iPad, just sign into your iTunes account when you need to.
-
How do I get The ipad locked to run only one application for customers (perhaps a webapp)
how do I get The ipad locked to run only one application for customers (just one web app, or video- instructions, or just safari). What I really want is that my customers to only use one app that has all my services. It is an interactive app so I would not like them to go surfing elsewhere while they are in my store.
Is it possible to do this on the iPad ?Try this:
LabVIEW Champion . Do more with less code and in less time .
Attachments:
checkbox - clusters_MOD.vi 23 KB -
my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
-
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer. How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
sandrafromsilver spring wrote:
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer. How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
Go to the following link:
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/ -
how can I saved the ipad isms conversation in a iMac file to be able of deleting them from the ipad?
Hi Aurea,
One way of saving your sms conversations so that you can then delete them from your iPad would be to back up the contents of your iPad using either iTunes or iCloud. See these articles -
Create and delete iPhone, iPad, and iPod touch backups in iTunes - Apple Support
iCloud: iCloud storage and backup overview
Thanks for using Apple Support Communities.
Best,
Brett L -
How can I backup the iPad to the non-C drive of the computer that runs the itune? I have already setup the library at a NAS and seems only media file are stored int he library. iPad backup still need to take use my C: drive that is running out of space
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Cheers, Tom -
How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?
If you have iOS 5 installed on it, you don't need a PC. simply turn it on and set it up.
if you don't have iOS 5 then you'll need a computer. -
How to I get the iPad to recognize a number beginning with 0 without it cutting off the 0
How do I get the iPad to recognize a number beginning with 0 without dropping the 0. And how do I get the iPad to recognize a 4 (birth year) or 5 (zip code) digit number with adding a comma delineating it to thousands?
Hi,
Because the iPad requires more power than from a normal USB port can supply therefore you can not charge an iPad using ONE USB port on a laptop/PC. Please try this free utility, many HP users say it works:
http://event.asus.com/mb/2010/ai_charger/
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How do you connect the iPad too, How do you connect the iPad to apple tv
How do you connect the iPad to Apple TV
On the same network and same apple ID with home sharing turned on they should connect.
Maybe you are looking for
-
How Do I Create A New Page To Edit Visually?
I am trying to create a java program with a main. I can get Studio Creator 2 to create the code for a new main that is empty, but I can't seem to get it to create a page that I can add buttons to visually. I know how to add components using code, but
-
I select images in Lightroom 5 and then select Merge in HDR Pro. The images go to Photoshop (CC), but when the HDR dialog opens, the imaage area is black. I also have PS CS6 and it works correctly there. Is this a bug in CC?
-
Reporting multi-currency on reports, without hardcoding the exchange rates
I've seen this problem posted in a few different spots, and the general answer is, reporting only reports in a single currency per report. Unless you do some calculations in a column to get a new currency value. Problem... 1. we dont really want to h
-
Why can't i create states in spark.group?
Hi All, How can i use the spark stated in group? I'm trying to do: <?xml version="1.0" encoding="utf-8"?><s:Group ... <s:States> <s:state> .... Can can't get this option. Is it possible that the state can be used only under s:applicat
-
Pushing Enterprise App to different user or goup
We have setup Mac OS X Server as part of our iPAD deployment through profile manager. We are trying to push our enterprise app to different user through profile manager,which has different version. Like Version 1.1 to one user or group and 1.2 to ano