How to i change ports to my airport extreme

i have an xbox with a moderate NAT. The xbox is telling me to change my port to have a better connection to the xbox. can anyone help?

Unfortunately, the AirPorts are not listed as Xbox Live-compatible routers ... so there is no guarantee doing this will get Open NAT status for Xbox Live!
The following web blog does a great job explaining the NAT issues with Xbox Live! Basically what it comes down to is that although you can get an Internet connection for the Xbox with the AirPorts, you may not get the necessary NAT setting (Moderate or Open) for the Xbox Live! on-line game that you want to play. As such, you basically have two options: 1) Create a DMZ (Apple calls this a Default Host) for the XBox or 2) Configure the AirPort for Port mapping to open the required ports to allow Xbox Live! access ... or 3) Use a compatible router.
Option 1 - Create a DMZ
AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT
Enable default host at: <Enter the IP Address for the XBox>
Option 2 - Configure Port Mapping
The following ports must be available for Xbox Live to operate correctly:
UDP 88
UDP 3074
TCP 3074
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the Xbox 360.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
Click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <Enter the MAC hardware address of the Xbox or the MAC address of the wireless depending on how you connect the XBox to the network.>
IPv4 Address: <enter the desired Private IP address>
Click Done.
2. Setup Port Mapping on the AEBSn.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT > Configure Port Mappings
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): 88, 3074
Public TCP Port(s): 3074
Private IP Address: <enter the DHCP Reserved IP address for the Xbox you created earlier>
Private UDP Port(s): 88, 3074
Private TCP Port(s): 3074
Click "Continue"

Similar Messages

  • How can I open ports on my AirPort Extreme, from WINDOWS?

    I have an Airport Extreme as my router, and I have a Windows-based computer. I need to open ports on the router (ironically, it is for my Apple TV).
    However, even though I can use the Airport Utility for Windows (latest version 5.5.3), I cannot open ports from the application.
    Everywhere I look, I am supposed to have a firewall tab in the Advanced section, but I do not have it. The only tabs that I have in Advanced are:
    Logging and Statistics
    MobileMe
    IPv6
    How can I open ports on my Airport Extreme router from Windows?

    Is your AirPort Extreme the only router in your network configuration?

  • How to add Ethernet ports to an Airport Extreme Base Station?

    I have successfully connected an HP Office Jet 6310 to the Airport Extreme Base Station, after downloading the latest software from HP. It is printing wirelessly, and it is great so far.
    The only problem is that the cable modem connected to ADSL has only one Ethernet port, and the Airport Extreme Base Station also has one Ethernet port. However, I need one more port to connect a phone (Vonage Telephone Adapter = VTA).
    What is the easiest way to achieve this? I saw several other messages discussing hubs and routers, but the answer is not clear yet. If I purchase an additional router, should it be connected between the cable modem and the Airport Extreme Base Station, or the other way round?
    Any help or advice would be appreciated!
    Thank you in advance for your time.
    MacBook Pro with 1.83 GHz Intel Core Duo   Mac OS X (10.4.7)  

    One final vital piece of information, which should be my conclusion on this topic.
    Following the advice received, I purchased a Switch from Linksys. Since the device didn't work for my purpose (dividing the Ethernet connexion into an Ethernet line for the HP printer and the Vonage phone), I called the Linksys support.
    I was told that what I needed was not a switch, but a router. I thus had to get reimbursed for the switch and hunt for the proper router.
    Finally, today, I have been able to find the item corresponding to my needs:
    A Belkin Wireless G Router F5D7230-4
    It costs less than 50 US$ and has all the necessary Ethernet ports. The setup is very simple, and I got it operational within a couple of minutes, despite some small problems getting the setup Wizard to work. It is Mac OS X compatible.
    Thus, at the end, I have got the HP 6310 Office printer and the Vonage VTA phone working together, with a robust Wireless network including WPA security. I would recommend this type of setting.
    The only trouble is that the AirMac Extreme Base Station has become completely useless! I will perhaps keep it as a souvenir, or as a decoration in the living room... This wouldn't have happened if the creators of this nice object, which is extremely expensive for what it provides, would have thought of including at least two Ethernet ports!
    The unexpected reply to my query could thus be ironically formulated by saying: "replace the Airport Extreme Base Station with a cheaper an more efficient device." Sorry for that!
    With my best regards to those who took the trouble to read this thread to the end.
    Yours, Hotaru

  • How to change port settings on airport extreme

    I need to change port settings on new airport extreme routers for xbox. I have the port settings, just do not how or where to make the change.

    dan620 wrote:
    I need to change port settings on new airport extreme routers for xbox.
    Welcome to Apple's discussion groups.
    Launch AirPort Utility, select your AirPort Extreme, click on "Manual Setup", select the "Advanced" panel, then the "Port Mapping" tab.

  • How do I configure port forwarding on Airport Extreme via Win 7/64?

    Hello all,
    I'm trying to forward some ports in order to correct issues with setting up servers for video games, i.e. I can connect but another can't while yet another can connect fine, etc. So far, despite thorough Google searching, I have not been able to find a solution that matches my exact problem.
    The specific ports I want to forward are 7777 and 25565. Currently, my connection is through Northstate Communications using an ADSL modem/router (Zhone Model No. 6218-I2-200-0NS) hooked up to an Airport Express + Time Capsule (Model No. A1254, version 7.5.2). As far as I know, the only reason the Airport Extreme is there is for the time capsule, but I don't know for sure whether my computer is actually connecting to the internet through one or through the other. I didn't set it up originally, unfortunately.
    I currently can't edit the settings for the Zhone. Supposedly, typing 192.0.0.1 into the address bar of my web browser should open the router configuration utility, but instead it returns "Oops! Google Chrome could not find <address>." I can, however, use the AirPort Utility for Windows to edit all of the AirPort's settings. I have followed the instructions in this YouTube video to forward the port 7777 using the AirPort Utility: http://www.youtube.com/watch?v=OFad6NvddRk but changes I make to Advanced/Port Mapping apparently do not work because www.whatsmyip.org and www.canyouseeme.org report that a test of port 7777 is either timing out or unavailable, respectively.
    I am concerned that the IP address automatically provided for me when I create a new port mapping is not the correct IP address since it is 10.x.x.x, which I can't find anywhere in any settings on the computer or online. But, when I type in the IP address I get from www.whatsmyip.org (97.x.x.x) and then go back to edit the setting I created, it has apparently reverted to 10.x.x.x without saving the address I entered.
    So, what am I doing wrong? Do I need to change some settings in the Zhone router before it will work, and if so, how can I access it? What is the 10.x.x.x address that the AirPort Utility assigns to new port mappings by default? Since I intend to use Hamachi to host the game server, do I need to use the IP address given to me by that program (5.x.x.x) instead? As far as I can determine, all my drivers are up to date. Any assistance would be much appreciated. Other system specs given below:
    CPU: AMD Phenom II X4 945 3.00 GHz
    MB: MSI 790FX-GD70 AM3 AMD
    RAM: Corsair Dominator 4GB (2 x 2GB) 240-Pin DDR3 SDRAM 1600 (PC3 12800)
    Mushkin Enhanced Blackline 4GB (2 x 2GB) 240-Pin DDR3 SDRAM 1333 (PC3 10666)
    GPU:  Sapphire 100258-1GHDMI Radeon HD 4850 1GB 256-bit GDDR3 PCI Express 2.0 x16
    Wireless: AZiO AWD102N PCI Wireless Adapter
    OS: Windows 7 64-bit
    -R

    Thanks for your response. I attempted to do that, but I couldn't find any way to access the configuration for the Zhone router. Typing the IP address into my web browser's address bar only resulted in "page could not be found" or "page timed out", etc. I called tech support at Northstate, who likewise suggested that the Zhone router should be set to bridge mode and the AEBS set to router mode since it would be easier for me to configure the AirPort. After wrangling a bit with them over my inability to change any settings for the Zhone, they sent a technician over. He messed around with the Zhone, apparently putting it in bridge mode, and we managed to get the AirPort to work without any double NAT errors. I reset the AirPort and created a new configuration file. Unfortunately, when I went to the Advanced/Port Mapping menu and repeated the original steps to forward port 7777, tests at www.whatsmyip.org still returned "timed out". The technician said he wasn't knowledgable enough about Apple products to assist me any further and suggested I call their tech support or visit the nearest Genius Bar. So that's about it. Any other ideas?

  • How do I open ports on my airport extreme and assign a fixed IP Address for a device connected to my network?

    I recently had a security system installed in my house.  One of the features is an EPAD which enables me to have a virtual keypad on my iphone, and computer to operate the alarm system.  The technician was not familiar with Mac's and Airports.  How do I open port 80 to 80 in my airport and assign a fixed IP address for the EPAD?  Apparently this is what is needed to make this work.

    There are three ranges of "strictly local" IP addresses reserved for local Network use:
    192.168.xxx.yyy
    172.16.xxx.yyy
    10.xxx.yyy.zzz
    What your Router does for you is to act as your agent on the Internet.Your requests are packaged up and forwarded on your behalf, and only when a response is expected is the response returned to your local IP address.
    Directing Network Traffic to a Specific Computer on Your
    Network (Port Mapping)
    AirPort Extreme uses Network Address Translation (NAT) to share a single IP address with the computers that join the AirPort Extreme network. To provide Internet access to several computers with one IP address, NAT assigns private IP addresses to each computer on the AirPort Extreme network, and then matches these addresses with port numbers. The wireless device creates a port-to-private IP address table entry when a computer on your AirPort (private) network sends a request for information to the Internet.
    If you’re using a web, AppleShare, or FTP server on your AirPort Extreme network, other computers initiate communication with your server. Because the Apple wireless device has no table entries for these requests, it has no way of directing the information to the appropriate computer on your AirPort network.
    To ensure that requests are properly routed to your web, AppleShare, or FTP server, you need to establish a permanent IP address for your server and provide inbound port mapping information to your Apple wireless device.
    To set up inbound port mapping:
    1) Open AirPort Utility, select your wireless device, and then choose Base Station > Manual Setup, or double-click the device icon to open its configuration in a separate window. Enter the password if necessary.
    2) Click the Advanced button, and then click Port Mapping.
    3) Click the Add button and choose a service, such as Personal File Sharing, from the Service pop-up menu.

  • How to disable Ethernet Port on 2003 Airport Extreme Base Station

    I have a roommate who does not help with the cable bill. He is always plugging his computer into the ethernet port of the Airport base station (no wireless card in his computer). The Base Station sit on top of the cable box in the living where its plugged directly into the cable box for internet access. Unfortunately moving the cable box or base station is not an option. How do I disable the ethernet port or prevent him from having access to the base staion?

    +How do I disable the ethernet port or prevent him from having access to the base staion?+
    You could prevent him from connecting using wireless, but not ethernet.
    On second thought, you could hide his ethernet cable. For a permanent solution, you could always fill the ports with glue, but would probably regret it at some point.

  • How to set up port mapping in airport extreme?

    I just buy a Ip cam (d link) which need to set up port forwarding for outside access.
    What can I do?  My ISP is netvigator.
    How to set up and input which address to the airport utility?
    Please help.
    Thanks!

    Mmm, generally you don't need to do much port mapping in an extreme. Not sure I understand you.  What does the d-link do?

  • How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

    As the title suggests...
    I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer.  (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding  only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time. 
    How do I do that on an AEBS?
    In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines? 
    TL,DR version:  How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.  

    You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

  • How do I forward a port on my Airport Extreme? I have a Belkin @TV (it's like a sling box), and to watch it over cellular on my iPhone I need to forward the port 49177 in the router settings.

    How do I forward a port on my Airport Extreme? I have a Belkin @TV (it's like a sling box), and to watch it over cellular on my iPhone I need to forward the port 49177 in the router settings. A simple set of instructions would be greatly appreciated.

    How to Port Forward on AEBS

  • How to connect a hard drive on Airport Extreme (second edition)

    how to connect a hard drive on Airport Extreme (second edition)? Does it need a special format? It is now fromat on FAT32, but i don't see it ??

    The USB port your Mac is high powered. The port on the AirPort Extreme is not.
    So, it tends to be borderline as far as its ability to supply sufficient power to a hard drive...even if the hard drive has its own power supply.
    Often, users...including me....need to use a powered USB hub when they attach any drive to the USB port on the AirPort Extreme.
    You might want to give that a try. Double check to make sure that the drive is formatted in FAT32 as well, since Windows NTFS or exFAT will not work with the AirPort Extreme.
    Powering down and restarting the entire network.....modem first, then router, etc.....is something that you would always want to do after any change or addition to a network.

  • What's the most recent opinion about Time Machine backups to Hard Drives connected to the USB port on the Airport Extreme Base Station (5th generation)?

    I have been searching the Apple communities and Internet for a final answer.  I just bought an Airport Extreme Base Station (5th generation) and LaCie d2 quadra 1TB external drive as a replacement for TWO failed Time Capsules, neither of which Apple would replace due to failed power supplies.  I formatted the 1TB drive using Disk Utility (Mac OS extended (journaled)) from my MacBook Pro, and then plugged into the Airport Extreme Base Station USB port.  The Airport Extreme Base Station see the Hard Drive, and my MacBook Pro sees the Hard Drive in my finder under shared resources.  Time Machine, however, does not see the drive.  Is there a solution for this problem?  If Time Machine will not work, is there another software product out there that will work, like Carbon Copy.  Having to plug the backup drive into the USB port of your laptop every evening kind of defeats the purpose of having a laptop.  Any suggestions would be appreciated.

    Keeping in mind that this is not supported by Apple, I have been successful at doing the following:
    1) Format the entire drive (1 Partition) as Mac Extended (Journaled). You must click in Options and set it as a GUID Partition Table (first option)
    2) Plug drive via USB to AEBS
    3) Using Airport Utility, use Manual Setup, then under Disks, select the new Disk and click File Sharing, then Enable File Sharing and Secured Shared Disks (recommended, of course). Other settings are up to you.
    4) IMPORTANT: you will NOT see this Disk in Time Machine until you open Finder and double-click on it. You will not need to do this again (hopefully).
    5) Now it should appear in Time Machine. Remember to exclude any large files like Virtual Machines, since they will be re-backed-up (is that a word?) every time it changes in any way.
    6) Remember that the first backup (over WiFi) is the longest. Leave the computer alone during this period.
    Good luck, and let us all know how it went for you!

  • How do I Setup USB HDD on Airport EXTREME TIME CAPSULE? USB HDD Not showing up

    How can I get the HDD to work with my airport extreme?  Does it need formatted a specific way for mac?  Are there certain hdd types that work best with the I have a WD usb hard drive which doesn't show up when connected to airport extreme.  I'm trying to setup time capsule, but Having no luck.  I'm new to the Imac. 
    Message was edited by: clower80

    A couple of pointers.
    The hard drive must be specifically formatted in Mac OS Extended (Journaled) to work with the AirPort Extreme's USB port. Check the documentation that came with the drive to find out how it is formatted at the present time.....it is likely formatted to work with Windows, which is not compatible with the AirPort Extreme.
    Unfortunately, even if the drive is formatted correctly, Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme, so that will be the next hurdle to deal with.
    Some users actually do seem to be able to make this work, but overall, it is not a reliable method to backup your data if it is important to you.

  • How to setup guest net work in airport extreme

    Hi,
    i have how to setup guest net work in airport extreme?
    i have the airport extreme and the airport base station as a range extantion.
    all is workig good :-)/
    i the init setup (od the extreme) i setup the router to support also guest network with password.
    when i scan the network i canor see the guest network.
    also i canot set it up from the air play (win7 sp1)
    THX :-)

    Mmm, generally you don't need to do much port mapping in an extreme. Not sure I understand you.  What does the d-link do?

  • Opening a port issue: I Need to open a port in an airport extreme.

    I Need to open a port in an airport extreme, but I'm connected through an airport express in bridge mode.  I need to access a specific computer inside my network through that port to be able to use it as a server.  I can't seem to find the correct way to set everything up.  I've tried opening the port and everytime I check it through telnet or any open check tool on the net it keeps saying the port is closed.  I'm stumped.

    After digging around it looks like Snow Leopard doesn't use ipfw for opening ports.
    Does anyone know how to open ports in Snow Leopard? Apple don't seem to have any info on this - besides the allow incoming connections for certain applications.
    Will try WaterRoof and see what happens.
    Cheers
    Ben
    Message was edited by: Ben Sciascia

Maybe you are looking for