How to I connect to a custom CMS from FrameMaker Connenction Manager?

Hello,
I am using the Adobe Technical Communication Suite 5 and was wondering how
I can connect to a custom CMS, using the Connection Manager in FrameMaker 12.
Is there a write-up on making custom connections anywhere?
Thanks,
Jim

See:
http://blogs.adobe.com/techcomm/2012/09/open-source-sample-connector-between-framemaker-11 -and-adobe-cq-now-available.html
How to build a connector between your CMS and FrameMaker 11? New CMS API documentation now available! « Technical Commun…
Framemaker Developer Center | Adobe Developer Connection [See third section down (CMS Connector)]

Similar Messages

How can I connect to a windows server from a mac book pro

How can I connect to a windows server from a mac book pre?

I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
Any help is greatly appeciated.

How to call & pass values to custom page from seeded page table region

Hi All,
can anyone tell me how to call & pass values to custom page from seeded page table region(Attribute is not available in seeded page VO)
it is urgent. plssss
Regards,
purna

Hi,
Yes, we do this by extending controller, but you can also try this without extending controller.
1. Create Submit Button on TableRN using personalization.
2. Set "Destination URI" property to like below
OA.jsp?page=/<yourname>/oracle/apps/ak/employee/webui/EmpDetailsPG&employeeNumber={@EmployeeId}&employeeName={@EmployeeName}&retainAM=Y&addBreadCrumb=Y
Give your custom page path instead of EmpDetailsPG.
EmployeeId and EmployeeName are VO attributes(Table Region)
If you dont have desired attribute in VO, then write logic in your custom page controller to get required value using parameters passed from URL path.
In this case, only personalization will do our job. Hope it helps.
Thanks,
Venkat Y.

How do i connect to sql server 2012 from cmd .

Hi ,
I Installed sql server 2008 R2 and 2012 Express and sql server2014 . I can conect to sql server 2008 R2 using
SQLCMD -L command .
How do i connect to sql server 2012 express edition from cmd .
Any Hep appreciated
Thanks in advance,
Shravan

I HAVE ANOTHER INSTANCE NAMED TEST WHEN I USE THE COMMAND IT GIVES ME THIS ERROR
HOW TO RECTIFY
C:\Users\HP>SQLCMD -S HP-HP/TEST
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Named Pipes Provider: C
ould not open a connection to SQL Server [67]. .
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Login timeout expired.
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : A network-related or in
stance-specific error has occurred while establishing a connection to SQL Server
. Server is not found or not accessible. Check if instance name is correct and i
f SQL Server is configured to allow remote connections. For more information see
SQL Server Books Online..
PLZ HELP

How do I connect to a DB2 database from Oracle 10G on linux?

Hi
I have tryed to connect to a DB2 database from oracle 10 G on linux.
I have installed unixODBC and a db2 odbc driver. I can connect to the db2 using isql, but oracle comes with this error:
select * from testtable@acc_spc_gr2
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: DB_ODBC_INTERFACE (718): ; [C077]
Could not find symbol 'SQLAllocConnect' in dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library
'/opt/ibm/iSeriesAccess/lib/libcwbodbc.so'
ORA-02063: preceding 3 lines from ACC_SPC_GR2
What am I doing wrong? Any one have a guide to do this?
- Jesper

this is my complete configuration
Database_
-bash-3.2$ export ORACLE_SID=XE
-bash-3.2$ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Mié Jul 7 10:04:43 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Conectado a:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Platform_
Linux srvpdf 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux
*/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/hs/admin/initDB2DATABASE.init*
#This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
#HS_FDS_CONNECT_INFO = ODBC_DSN
HS_FDS_CONNECT_INFO = prueba
HS_FDS_TRACE_FILE_NAME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/hs/admin/DB2DATABASE.log
HS_FDS_CONNECT_INFO = DB2DATABASE
#HS_FDS_TRACE_LEVEL = debug
HS_FDS_TRACE_LEVEL = 0
HS_FDS_SHAREABLE_NAME = /opt/ibm/iSeriesAccess/lib/libcwbodbc.so
# ODBC specific environment variables
set ODBCINI=/etc/odbc.ini
# Environment variables required for the non-Oracle system
set DB2INSTANCE=is400
listener.ora_
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = DB2DATABASE)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM =hsodbc)
(ENVS = LD_LIBRARY_PATH = /opt/ibm/iSeriesAccess/lib:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.18.3.32)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.18.3.31)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
tnsnames.ora_
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = srvpdf)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
DB2DATABASE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost )(PORT=1521))
(CONNECT_DATA =
(SERVICE_NAME = DB2DATABASE)
(HS=OK)
odbc.ini_
[prueba]
Description = iSeries Access ODBC Driver
Driver = iSeries Access ODBC Driver
System = xxx.xx.3.2
UserID = xxxxxx
Password = xxxxxx
Naming = 0
DefaultLibraries = QGPL
Database = CHERRYWEB
ConnectionType = 0
CommitMode = 2
ExtendedDynamic = 0
DefaultPkgLibrary = QGPL
DefaultPackage = A/DEFAULT(IBM),2,0,1,0,512
AllowDataCompression = 0
MaxFieldLength = 32
BlockFetch = 1
BlockSizeKB = 128
ExtendedColInfo = 0
LibraryView = 0
AllowUnsupportedChar = 0
ForceTranslation = 0
Trace = 0
odbcinst.ini_
[PostgreSQL]
Description = ODBC for PostgreSQL
Driver = /usr/lib/libodbcpsql.so
Setup = /usr/lib/libodbcpsqlS.so
FileUsage = 1
[iSeries Access ODBC Driver]
Description = iSeries Access for Linux ODBC Driver
Driver = /opt/ibm/iSeriesAccess/lib/libcwbodbc.so
Driver64 = /opt/ibm/iSeriesAccess/lib64/libcwbodbc.so
Setup = /opt/ibm/iSeriesAccess/lib/libcwbodbcs.so
Setup64 = /opt/ibm/iSeriesAccess/lib64/libcwbodbcs.so
UsageCount = 1
CPTimeout =
CPReuse =
System = 172.18.3.2
User = inf5mito
Password = lonco3pue
NOTE1 = If using unixODBC 2.2.11 or later and you want the 32 and 64-bit ODBC drivers to share DSN's,
NOTE2 = the following Driver64/Setup64 keywords will provide that support.
Threading = 2
DontDLClose = 1
ODBC Driver_
-bash-3.2$ cd /opt/ibm/iSeriesAccess/lib
-bash-3.2$ ls -ltr
total 2260
-r-xr-xr-x 1 root root 443939 Apr 5 2008 libcwbxda.so
-r-xr-xr-x 1 root root 94504 Apr 5 2008 libcwbrc.so
-r-xr-xr-x 1 root root 16636 Apr 5 2008 libcwbodbcs.so
-r-xr-xr-x 1 root root 729572 Apr 5 2008 libcwbodbc.so
-r-xr-xr-x 1 root root 998060 Apr 5 2008 libcwbcore.so
and this is my error.
SQL> /
select from display@db2database*
ERROR en línea 1:
ORA-28500: la conexión de ORACLE a un sistema no Oracle ha devuelto este
mensaje:
*[Generic Connectivity Using ODBC][C077] Could not find symbol 'SQLAllocConnect'*
in dynamic library
*[C079] Failed to load dynamic library*
*'/opt/ibm/iSeriesAccess/lib/libcwbodbc.so'*
ORA-02063: 3 lines precediendo a DB2DATABASE
Edited by: user6669081 on 07-jul-2010 6:31

How to get connection of the db lite from java stored procedure?

Hello! All.,
I have a written java stored procedures to assign sequence keys, and update some tables. The procedure is working as per our need by using the following connection information.
try {
int rowFetched = 0;
Class.forName("oracle.lite.poljdbc.POLJDBCDriver");
// connect to the database
Connection conn = DriverManager.getConnection("jdbc:polite:polite",
"system", "manager");
My question is, It is possible in db lite to get a default connections like we use in the enterprise database
conn = new OracleDriver().defaultConnection();
Could anybody please shed some light on this.
Thanks in advance.
Kathir

Hello Upi! out of curiosity if you happen to know the answer for the following, I do appreciate it.
Hello! We are using BC/ADF JClient to select and for any DML operation against Oracle Lite database. We may have more than one user(s) log on to our application, so we requires to authenticate oracle lite user credential using JDBC dynamically.
I am utilizing the features of JCLoginDialog.java and manipulation bc4j.xcfg file. This work real good for accepting username/password credentials dynamically, since we have multiple database in one computer I have to accept DSN name and if possible built my own configuration file.

How to call force render on custom effect from AEGP?

Hi All,
I want to call a force render on my custom effect from AEGP. I tried setting PF_OutFlag_Force_Rerender flag in PF_CMD_COMPLETELY_GENERAL (Called from AEGP via AEGP_EffectGeneric()). But it did not work. Is there any other way to force a rerender on the custom effect?
Thanks,
Dheeraj.

Thanks a lot Shachar for the reply. But if I use AEGP_SetStreamValue AE
will add the action to Undo/Redo stack. Please correct me if I'm wrong.
I don't want AE to add it to undo/redo stack. So is there any way to
tell AE not to add AEGP_SetStreamValue() action to undo/redo stack? Or is there a call to force render from AEGP?

How to store Connection object and call it from other programs.

Hi,
I am trying to connect to the database, store the connection object and use this connection object from other standalone java programs.
Can any one tell me how to do this? I've tried in the following way:
In the following program I am connecting to the database and saving the connection object in a variable.
public class GetKT2Connection {
   public static void main(String[] args) {
      String url = "jdbc:odbc:SQLDsn;
      String dbUser = "sa";
      String dbPwd = "sa";
      Connection kt2conn = Connection connection = java.sql.DriverManager.getConnection(url, dbUser, dbPwd);
      if(kt2conn == null) {
         System.out.println("Database Connection Failure!");
      else {
         System.out.println("Connected to Database...");
     GetKTConnectionObj.storeKT2ConnectionObj(kt2conn);
} Here is the program to save connection object in a variable.
public class GetKTConnectionObj {
   static Connection kt2Connection = null;
   public static void storeKT2ConnectionObj(Connection conn) {
   kt2Connection = conn;
   public static Connection getKT2ConnectionObj() {
   try {
      return kt2Connection;
   catch(Exception e){
      System.out.println(e);
return null;
}Now from the following code I am trying to get the connection object that is stored. But this is throwing NullPointerException.
public class Metrics_Migration {
public static void main(String args[]) {
     try {
    java.sql.Connection connection_1 =   GetKTConnectionObj.getKT6ConnectionObj();
     catch(Exception e){
}

kt2Connection is null. You need to store it first, to make it not null. Otherwise it will stay null forever. And why on earth are you trying to do this THIS way?
If you are running the two applications separately, it wont work either.

How do I connect to a Sybase database from Crystal?

I have never tried to connect to Sybase data before and I am having difficulty figuring out how. I am using CR XIR2 from my desktop and trying to connect to what I am told is a Sybase database (voicemail system). I believe Sybase vers 12.5, but not entirely sure yet. Postings on the forum and other sites appear to be directed toward sdk developers or other development and were not helpful. Most of what I am reading points toward an Adaptive Server® Enterprise (ASE) ODBC Driver by Sybase. However, I was told that was not true but the person promising to forward the information never came through. Are there additional drivers I need to install or can someone point me in the right direction? Thanks!

Hi Wendy,
32-bit NATIVE DRIVERS
CRDB_P2SSYB10.DLL is the native driver for Sybase ASE. It is used with Sybase ASE 12.5
NOTE: The native driver for Sybase ASE cannot be used to connect to Sybase ASA (Adaptive Server Anywhere) or Sybase ASIQ (Adaptive Server IQ). Sybase ASA and Sybase ASIQ include their own ODBC drivers as part of their installation package. These drivers provide the only means of connecting to Sybase ASA and Sybase ASIQ databases.
I hope this helps you.
Regards,
Prashant
Edited by: Prashant Saduwale on Oct 10, 2008 4:19 PM

How can I connect to my database ORACLE from JavafX?

Hi! ¿Anybody have a example to learn how could connect my ORACLE database from my javafx application?

Just use JDBC like you do in a regular Java program.
Either you translate the code to JavaFX (creating Java objects, etc.) or you do a Java layer to simplify access.

How to access "Alternative Realm" or "Custom Realm" from components like Servlet ?

Hello,
Says if I have alternative realm or my custom realm which implement
"ManageableRealm" interface. How can I access the realm from other
component, like Servlet or EJB in same WLS ? I tried using code like this
BasicRealm realm =
Realm.getRealm("XmlRealm","weblogic","myclass.DebugRealm");
if (realm != null) {
Class realmClass = realm.getClass();
out.println("Realm is " + realmClass.getName());
Which "myclass.DebugRealm" is classname of my own realm. This realm works
fine when using for authentication and authorization. But when I run this
code on servlet, it seems that it doesn't return the realm it created when
starting WLS, I mean the one that served authentication and authorization.
But it create a new instance of this class (I knew it 'cos I put debug
message in its constructor). So how can I get reference to the realm
instance which is created when starting WLS ?
Thank you in an advance,
Siros

Hello again,
Sorry to say that now I've got the way. I post here again for someone who
may face that same problem.
So strange that, I just changed the realm name in below code to "custom" and
then it works !! My realm is extended from "AbstractListableRealm" class and
I think I named my realm as "XmlRealm" in it constructor by call
super("XmlRealm");
But seems like its "getName()" method always return "custom", so in servlet
code, it' rather be.
BasicRealm realm = Realm.getRealm("custom");
if (realm != null) {
Class realmClass = realm.getClass();
out.println("Realm is " + realmClass.getName());
This works fine and no instance of realm is created. Anyway I saw that
constructor of "AbstractListableRealm" take String argument for "name" of
the realm. So why it's always "custom" ???
Comments are welcome,
Siros
"Siros Supavita" <[email protected]> wrote in message
news:[email protected]..
Hello,
Says if I have alternative realm or my custom realm which implement
"ManageableRealm" interface. How can I access the realm from other
component, like Servlet or EJB in same WLS ? I tried using code like this
BasicRealm realm =
Realm.getRealm("XmlRealm","weblogic","myclass.DebugRealm");
if (realm != null) {
Class realmClass = realm.getClass();
out.println("Realm is " + realmClass.getName());
Which "myclass.DebugRealm" is classname of my own realm. This realm works
fine when using for authentication and authorization. But when I run this
code on servlet, it seems that it doesn't return the realm it created when
starting WLS, I mean the one that served authentication and authorization.
But it create a new instance of this class (I knew it 'cos I put debug
message in its constructor). So how can I get reference to the realm
instance which is created when starting WLS ?
Thank you in an advance,
Siros

How do i connect manually to Exchange 2013 from Outlook 2007/2010 in another forest?

Hello All,
I have a source organization: Windows 2003 domain + Exchange 2010 SP3 + smtp domain acme.com
Target organization: Winows 2012 R2 domain + Exchange 2013 CU3 + smtp domain acme.com
We are migrating to target organization.
I want to connect Outlook 2007/2010 to their target mailbox (Exchange 2013) from a machine which is joined to Source DOmain.
I couldn't use autodiscover, because as the machine is joined to source domain, autodiscover it's mapping to Exchange 2010.
It only works when I machine is joined to target domain.
Any idea how to connect manually to eXCHANGE 2013 mailbox from a machine which is joined to source domain?
Regards
José Osorio

Hi,
Firstly, I’d like to explain, Autodiscover service can be used cross forest:
1. the two forests must be trusted.
2. configure a mail contact in the original forest.
For more information, please refer to the partition named how to configure the Autodiscover service for cross-forest moves in the following article:
http://technet.microsoft.com/en-us/library/jj591328(v=exchg.141).aspx#BKMK_ConfigureForCrossForestMoves
Thanks,
Angela Shi
TechNet Community Support

How to use connection pooling in 6.5 from standalone application?

Hi,
Is it possible to standalone application get connection from connection pool Sun ONE App Server 6.5?
If can means how pls tell me the steps?
I am trying standalone application to get connection from pool it will throw StackOverflowError.
thanks
with regds
parthi

Hi,
Is it possible to standalone application get connection from connection pool Sun ONE App Server 6.5?
If can means how pls tell me the steps?
I am trying standalone application to get connection from pool it will throw StackOverflowError.
thanks
with regds
parthi

How do we connect to a remote database from a Java Stored Procedure?

We have a situation where we are not able to use a PSP (PL/SQL server page) to update a remote database using database link in an Oracle8i database. This is a known bug on 8i and is fixed in 9i. Can this be done using PSP calling a Java stored procedure, which in turn connects to the remote database and performs the update. If so, how we do remote connectivity to another database from the current java stored procedure.

We have a situation where we are not able to use a PSP (PL/SQL server page) to update a remote database using database link in an Oracle8i database. This is a known bug on 8i and is fixed in 9i. Can this be done using PSP calling a Java stored procedure, which in turn connects to the remote database and performs the update. If so, how we do remote connectivity to another database from the current java stored procedure.

How can I connect to multiple WLS instances from a single Apache virtual host

Configuration : WebLogic 5.1 SP8 & Apache
I need to be able to have a configuration that looks something like this.
www.company.com/x -> WL cluster01
www.company.com/y -> WL cluster02
In all the examples that I have been able to find they alway defines the the WL
connection for the entire virtual host, but I need to be able to do it on a location
basis is that possible?
Thanks
Jens Schutt

httpd.conf:
<VirtualHost 172.17.9.24:443>
DocumentRoot "/www/X"
ServerName qawebivesta.qa.livecapital.com
ErrorLog /usr/local/apache/logs/qaweb1.error_log
TransferLog /usr/local/apache/logs/qaweb1.access_log
SSLEngine on
SSLCipherSuite
ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
SSLCertificateFile /usr/local/apache/conf/ssl.crt/server.crt
SSLCertificateKeyFile /usr/local/apache/conf/ssl.key/server.key
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
SSLOptions +StdEnvVars
</Files>
<Directory "/usr/local/apache/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
Debug ON
DebugConfigInfo ON
<Location /ivesta/>
SetHandler weblogic-handler
WebLogicHost qawlgc1
WebLogicPort 7001
</Location>
<Location /TMPPhase2>
SetHandler weblogic-handler
WebLogicHost qawlgc1
WebLogicPort 11001
</Location>
</VirtualHost>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/TMPPhase2 works fine, but when I try to access /ivesta I get a 404 from WebLogic
"https://qawebtmp.qa.livecapital.com/ivesta/index.jsp?__WebLogicBridgeConfig
Weblogic Apache Bridge Configuration parameters:
     WebLogic Cluster List:
          General Server List:
               Host: 'qawlgc1' Port: 11001
          DefaultFileName: ''
          PathTrim: ''
          PathPrepend: ''
          ConnectTimeoutSecs: '10'
          ConnectRetrySecs: '2'
          HungServerRecoverSecs: '300'
          MaxPostSize: '-1'
          DynamicServerList: ON
          StatPath: false
          CookieName: WebLogicSession
          Idempotent: ON
          FileCaching: ON
          DisableCookie2Server: OFF
          QueryFromRequest: OFF
          Build date/time: Jun 25 2001 15:09:34
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This should have been connecting to my 7001 instance not the 11001.
Thanks
Jens
"Eric Gross" <[email protected]> wrote:
What do you mean the wrong port? Post the complete output from
WebLogicBridgeConfig as well as the URL you used.
Also, paste the weblogic relative portions from your httpd.conf
Thanks,
Eric
"jens" <[email protected]> wrote in message
news:[email protected]...
I also used ?__WebLogicBridgeConfig to verify that it did pick up thewrong port.
Here is my build date for mod_wl.so in SP10
Build date/time: Jun 25 2001 15:09:34
Thanks
Jens
"Eric Gross" <[email protected]> wrote:
Make sure you are using the latest plugin. As well, add parameter:
DebugConfigInfo=ON and make a request with a query paramater of
?__WebLogicBridgeConfig and you should then see the build date/time.
We can
then see if you are indeed using the latest plugin.
It is not a possibility to get the source.
Regards,
Eric
"jens" <[email protected]> wrote in message
news:[email protected]...
And the solution where you put the WebLogic parm under location
the
last
location
over rule the previous.
I have also tried to upgrade my plug-in from SP8 to SP10 but that
didn't
make
any difference either.
Is it possible to get the source code for the plug-in, I'm afraid
that
it
don't
follow put's all it's parm's a the vhost level no matter where in
the
conf
file
they are placed.
HELP
Jens
"Eric Gross" <[email protected]> wrote:
Yu is correct.
Here is another way to do it as well:
MatchExpression /x
WebLogicCluster=server1:port,server2:port|PathTrim=/x
MatchExpression /yWebLogicCluster=server3:port,server4:port|PathTrim=/y
The general syntax for this would be:
MatchExpression exp name=value|name=value
Where exp=Mime type(*.jsp) or exp=/x(path)
The next argument in the list is a pipe(|) delimited list ofname=value
pairs (ie: WebLogicHost, WebLogicPort, WebLogicCluster, PathTrim,
PathPrepend, etc..).
Hope this helps.
Regards,
Eric
"Yu Tian" <[email protected]> wrote in message
news:[email protected]...
Hi Jens,
I think you can proxy by ppath.
<Location /x>
SetHandler weblogic-handler
WebLogicCluster cluster1
</Location>
<Location /y>
SetHandler weblogic-handler
WebLogicCluster cluster2
</Location>
thanks
Yu
"Jens" <[email protected]> wrote in message
news:[email protected]...
Configuration : WebLogic 5.1 SP8 & Apache
I need to be able to have a configuration that looks something
like
this.
www.company.com/x -> WL cluster01
www.company.com/y -> WL cluster02
In all the examples that I have been able to find they alway
defines
the
the WL
connection for the entire virtual host, but I need to be able
to
do it
on
a location
basis is that possible?
Thanks
Jens Schutt

How to I connect to a custom CMS from FrameMaker Connenction Manager?

Similar Messages

Maybe you are looking for