How to I get data in Canada

I called and got signed up for international data and can't actually get connected and get my email and data.  Phone is working ok and I have been in the "settings, cellular data, and have everything enabled.....but it still doesn't work.  I have also tried to connect to different carriers and reboot....no luck.  Any suggestions would be great as I need to get connected for work email. 

Mark48long you will need to update your roaming status by dialing *228 from your device anytime you are out of the service area.. also go into your settings and make sure it is set to accept roam.. let us know if this clears up the issues with the roaming..
the following has also been located in the coverage area under My Verizon ..and explains better on the settings on your phone.
The MORE Everything Plan8480; - Features | Verizon Wireless
Although CDMA coverage is available in many areas in Canada and Mexico, for best performance and coverage we recommend a 4G Quad Band UMTS Global Ready device.
4G Global Ready devices will automatically select GSMA digital wireless technology included in Verizon Wireless Global Ready mobile devices to use for placing calls and transmitting data while traveling abroad in certain areas. The Verizon Wireless network primarily uses CDMA technology for voice services, but GSM is used widely in Europe and other parts of the world. While traveling in countries that use GSM technology, you’ll need a Global Ready device to communicate on their network. Devices that only use CDMA technology aren’t compatible with GSM networks. See also CDMA and Global Phone.
A digital wireless technology included in Verizon Wireless Global Ready mobile devices to use for placing calls and transmitting data while traveling abroad in certain areas. The Verizon Wireless network primarily uses CDMA technology for voice services, but GSM is used widely in Europe and other parts of the world. While traveling in countries that use GSM technology, you’ll need a Global Ready device to communicate on their network. Devices that only use CDMA technology aren’t compatible with GSM networks. See also CDMA and Global Phone.
while in Canada and Mexico.
For 3G Global Ready devices, you will need to manually select GSM through the settings on your device.
Non Global Ready (CDMA only) devices may have limited coverage and slower speeds
PLEASE advise this post if this helps clear the roaming issue on your phone...

Similar Messages

  • How can I get Data from the Sound cart in Labview? Does a VI exist?

    How can I get Data from the Sound cart in Labview? Does a VI exist?

    Yes, there are VIs for acquiring data from Sound cards. And examples too. If you don't have LabVIEW yet, do a search on NI's site for example VIs.
    Khalid

  • How can i get data from another database SQL Server use database link from

    I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?

    hi,
    u should see following documentation:
    Oracle9i Heterogeneous Connectivity Administrator's Guide
    Release 1 (9.0.1)
    Part Number A88789_01
    in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
    regards
    umar

  • How do i get data from a structure using join?

    hi,
    what is the actual use of a structure.?
    my problem is :
    KUAGV is an existing STRUCTURE. it has got one fields each which links to MARA, AND VBKD tables. i want to fetch all related information from KUAGV, mara, vbkd . which is the better way : using joins or views or anything else? how do i
    get data from a structure using join?

    structure temporarily holds  any data passed to it dynamically throughout the runtime but doesnot store it permanently. so
    a structure cannot be included in a join.so instead of incuding structure KUAGV's field in a join 
    search the transparent table in which same field are present and  use it in join.
    A structure if created in DDIC(Data Dictionary) is a global DATA STRUCTURE which is used to group related information, for example you would group all the details of your bank account into a structure BANK_ACCOUNT that contains fields like account_Id, account_holder_name etc.
    If you create a structure in your program then it is local to your program. So you use this structure to create data holders of this DATA TYPE to hold data in your program.
    Edited by: suja thomas on Feb 11, 2008 6:24 AM
    Edited by: suja thomas on Feb 11, 2008 6:31 AM

  • How can i get data from a maintance view?

    Hi all.
        Can you give me some suggestion about 'How can i get data from a maintance view?'?
         Thanks
         Best regard

    hi
    good
    go through this link
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ecdf446011d189700000e8322d00/content.htm
    thanks
    mrutyun^

  • How do I get data back on my Numbers created inventory that was supposedly removed by spotlight?

    How do I get data back on my Numbers created inventory that was removed by Spotlight recently?  It seems to have happened after upgrading.

    Thanks for your reply.  Unfortunately when I click on "revert to" it shows no document.  It's very strange that the rest of my old inventories on numbers remain.  It is only my 2014 entries that went into a black hole somewhere.  When I click on my inventory pages it says: "OS X spotlight search information was removed."  It seems to have occurred after I recently updated Numbers.  I never did anything to have it removed and never got any kind of warning to my knowledge that it was about to be removed.  Very frustrating!
    Linda

  • APEX CSS - How do I get data in report columns to wrap?

    I found information here http://www.orafaq.com/wiki/APEX_FAQ
    About How do I get data in report columns to wrap?
    This works and another way to do it is by adding the CSS directly into the
    Home>Application Builder>Application 137>Page 1>Report Attributes>Column Attributes page
    in the Column Formatting area. I added 'white-space:normal' and this works in FF but in
    IE it has a different behavior.
    In FireFox
    testasdgadhad
    gadfadgadgadg
    adgafhsrgjsgnsfg
    nsdfbadfafhafha
    dfhadfh
    In Internet Explorer
    testasdgadhad gadfadgadgadg adgafhsrgjsgnsfg nsdfbadfafhafha dfhadfh
    Is there a way to force it so it display in IE the same way that it displays in FF?
    The correct display format is FF.
    Thanks,
    Nestor :)

    I have try this because I found it during a search and it makes no difference in IE.
    This is what I am using now 'display: block; width: 100px;max-width:100px;white-space:normal'
    I also tried 'display:block; width:500px'
    If I use the values 'normal' or 'pre' for white-space' it works in FireFox but not in IE, The display block
    does not seem to make a difference. It seems that all I need is 'white-space:normal' but again
    it does not works on IE.
    Thanks,
    Nestor :-)

  • How do I get data off  my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP!

    how do I get data off  my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP! I got married last week on holidays and have not had a chance to save photos yet.

    Hello there stidhambr15,
    I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't quite get the device going again, I recommend restoring the device.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
    iPhone and iPad: How to remove the SIM card
    http://support.apple.com/kb/ht5163
    iPhone 4 (GSM model)
    iPhone 4S
    Cheers,
    Sterling

  • TS1368 When I try to make a purchase at the App Store or iBook Store or iTunes an error message tells me my account is not valid at the UK store. I live in Canada so how did I get to be connected to the UK and how can I get back to Canada?

    When I try to make a purchase at the App Store or iBook store or at iTunes an error message tells me my account is not valid for the UK store. I've no idea how I got connected there and I'd like help getting back to Canada where I live. Any suggestions?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you are located.
    8. Tap "Done".

  • How can i  get data from anather database system  ????????

    Hi every body..
    I 've a problem .....
    I've an old program work on "DOS" and it's content database which content all Data that i need for that program
    The data file extension with ".FD" , ".VW" , ".LSS" & "SLP"
    I want to kow:-
    1) what is that database system
    2)What program could open or can get data from that database tables.
    3)can i do that with oracle...
    please describe every thing in details...
    ... Please replay quickly... urgently
    ...waiting your answer....

    You're probably better off consulting the documentation for the DOS program you're trying to deal with than hoping someone here will be able to guess what program you're using, identify the structure of the files, and tell you how to extract the data into something Oracle can import.
    Justin

  • How do I get data from a pc external hard drive to my mac

    I am about to purchase an Air. I have an external hard drive I have used for years with my PC.  It has countless pictures and music.  How can I get that data from my PC external drive to my new Air and also to the Time Machine?

    Thank you for your reply.  It is a Western Digital external USB 3.0 formatted for PC.  It includes pics, videos, music, documents, power point, etc.  would it still just be a drag and drop?
    Thanks!

  • Iphone sync is making me crazy how can I get data to and from my iphone without syncing?

    I'm a pc user and i'm sick of the iphone sync process jacking up my life when I decide to reinstall windows and the old itunes data is no longer there. how can I etup my iphone to not have to sync but transfer data to and from it like an android?

    The only way to get data onto the phone is by syncing.  To get some photos off the phone you can connect the phone to the computer with USB cable and use windows explorer to view and copy the photos from the phone to the computer.  You could use a program like ibackupbot or something similar on your computer and get data off the phone to your computer using that

  • How can i get data from standard report 'PP_ORDER_PROGRESS'?

    When I have a sales order,i want get Production Orders & Plan Order related to this SO.
    The same as result of standard report 'PP_ORDER_PROGRESS'~~
    How can I get the same data like report 'PP_ORDER_PROGRESS'~~
    TKS very very much~~

    Lorry,
    I hope you are looking for an option similar to CO46 transaction.
    You can use transaction COOIS, activate "Production orders" and "Planned orders" check box and in header level selection input your Sales order number to get a report you wanted.
    Regards,
    Prasobh

  • HT4623 How do I get data to work on my AT&T gophone

    How to get data to work on AT&T gophone iPhone I bought data plan but can't get it to work.

    T-Mobile in the U.S.?
    If so, with an iPhone purchased as officially unlocked in another country, or with an iPhone purchased in the U.S. that has been hacked to be unlocked?

  • How can we get date period in out put screen as a header (PLS Urgent)

    Hi frdz,
    In ad hoc reports client want to get date field in out put screen as per selection screen date priod.
    Kindly let me know how can we get the same.
    EX: My report selection peiod is 01.01.2006 to 31.12.2006
    The same above date I want to get in out field screen header.
    Thanks,
    $ Lakshmi
    Message was edited by:
            Lakshmi

    see if this link helps http://support.apple.com/kb/ht1212
    you will probably have to restore the iphone as new.

Maybe you are looking for

  • Text Input app

    tried any text input app from ovi? by the way ovi is giving out free apps as gifts.

  • Duplicate dock items since upgrading to Mountain Lion

    My upgrade to Mountain Lion has worked well, except for one minor irritating thing: a couple of applications are now duplicated in the dock at every log-in. • I have only one copy of each application (specifically they are TextExpander and Vitamin-R)

  • Stock Item Release Date not populated in Webtools

    I am looking to alert Online purchases of products that are shown in webtools ( i.e. Active = 'Y') that are not immediately available at a date in the future. It is not possible to use the Valid From Date because this controls the initial visibility

  • Firefox application error when closing 0xc0000005

    Hi I've been getting errors every so often when closing firefox. This is what I'm seeing http://i.imgur.com/VO3sA.jpg?1 I've been looking for a way to solve this error and figure out what is causing it. My search has brought me here. Some details. Th

  • Notified quantity exceeded by 10 KG

    Dear friends, I am facing the following error while taking GR for subcontracting P.O. Error is : Notified quantity exceeded by 10 KG Message no. M7248 Please do the needful... With kind regards jakku