How to i get past the settings screen when trying to view my photostream? I just get stuck on the iCloudPhotos Settings page and can to any further. Really annoying and i guess there is a simple answer to it? Can anyone tell me?

I can't view my photos on my TV using AppleTV. This is because when I get to the iCloud Photo Settings page and turn on My Photo Stream,there seems nowhere else to go to look at my photos. I guess there is a simple answer! Can anyone help.....please

artschic:
Welcome to Apple Discussions.
Congratulations on your new MacBook Pro. You'll love it.
In terms of your PowerBook G4, apparently your Hard Disk Drive has failed completely and I am not sure what else it wrong.
First, try this:
• Shut down the computer.
• Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
• Turn on the computer.
• Press and hold the Command + Option + P + R keys immediately after the startup chime.
• Hold keys down until you hear the startup chime for the third time.
• Release the keys and immediately hold down Shift key to start up in Safe Mode.
• Log in and empty Trash.
• Restart normally and log in.
If that does not work try Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
If still no dice, try the procedure outlined in the article Resolve startup issues and perform disk maintenance with Disk Utility and fsck.
cornelius

Similar Messages

I want to back up my 4S but I don't get the correct screen when I plug it into my Mac - Just iPhotos and iTunes (songs) pop up. How do I get to the screen where I can back up and restore?

I want to back up my 4S but I don't get the correct screen when I plug it into my Mac - Just iPhotos and iTunes (songs) pop up. How do I get to the screen where I can back up and restore?

Hi Spookola,
I don't know how that could have happened. Go through the folders for the rolls and separate the 2005 rolls from the 2006 rolls, then import the 2006 rolls.

HT201210 please let me know how to get past error msg 11 when trying to restore an ipod touch 4th gen

please let me know how to get past error msg 11 when trying to restore an ipod touch 4th gen

Is the iPod jailbroken? Googling shows that error 11 appears if it has been jailbroken.

I have Windows 8 and get a green screen when trying to view videos

I have Windows 8 and get a totally green screen when trying to watch videos. Any ideas?

go here with your problematic browser and see if you have flash player installed: http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
if you don't see confirmation that you have the flash player installed, go here and get it: http://get2.adobe.com/flashplayer/
p.s. untick mcafee unless you're certain you want it.

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
H.264 video should be supported by your basic Snow Leopard operating system. The DVCPRO HD family of codecs is part of the Apple "Pro" codecs package which is normally installed as part of a "Pro" video editing suite installer or contemporaneously installed separately as part of one of the newer pro editing apps like FCPX. if you already have one of these pro suites or apps installed or available, then re-install the correct codec package that is missing. If not, you will need to purchase a Pro suite or app to be able to install the required codec package.

I am using MTS files. They load in PE fine. The problem is when I try to play them, I just get audio and no video. I have installed the latest updates. Is there a CODEX that I need.

I have windows 8.1. I have downloaded the mts files from my video camera onto my hard drive. I have loaded a subset of these mts files into premier elements and they show up fine. I can bring them to the time line without a problem. The issue is that when I click on them, I only get the audio and no video. Normally when you click a thumbnail, the picture shows in the large screen. That screen remains blank.

John - thanks for your response
1. Graphics Adapter: Nvidia GeForce GTX 650
2. My driver before you response was 3/4/14   9.18.13.3523. I went to Nvidia and downloaded and installed latest driver 7/2/14 9.18.13.4052
3. Rebooted and checked APE and no change in the problem. Still doesn't show video when I double click an thumbnail or if I single click it does not show a video image in the large screen.
4. Some things I have done to try to resolve the problem.
     a. Searched this forum for a similar problem. I didn't see one.
     b. Did a web search to see if I could find a solution outside this forum
     c Went into "edit" and tried some changes in project preferences and setting to see if that would make a difference
     d. Tried to contact Adobe support to speak to a person but that seemed difficult and could never figure out how to do it.
5. I have always loaded AVI clips into this program and this is the first time I have tried MTS files. When I opened the new project, the program notified that I had to change something??? to load an MTS file and asked me if I wanted the program to do this for me. I said yes and here I am.   I seem so close to making it work.   Thanks

Getting a White Screen when trying to view ITune Purchases

Hi. I am using HDMI cables and when I go to watch anything I purchased on ITunes I get a solid white screen. I can view anything on YouTube just fine and could just look at movie trailers. Now I am getting a message telling me that the ITunes store is unavailable. But it is working just fine on my computer. I switched cables and am still having the same problem.
I'm at a loss. Any suggestions?

Hi,
While not an explanation of what is happening, I have had success restarting the device when this happens to me.

Why do I get black screen when trying to view a pdf in Safari?

I've re-installed the Adobe plug-in. I know a pdf is downloaded since I can save the black screen then open and actually view the pdf with Preview. So it's there but I can't view it.

The plugin is incompatible. Delete it and relaunch Safari.

Black Screen when trying to view videos that use Flash Player

Hi all,
Sometimes when I'm trying to view videos on Youtube or BBC iPlayer, which use Flash Player, I'll click play and after around 2-3seconds of the video playing, my screen will go black/dark blue and the audio will stop. I'm then forced to hard reset my computer as no keyboard shortcuts work. This is starting to annoy me. Any help would be appreciated.
I have the latest Catalyst, 12.1, the latest Chipset and BIOS. I have even tried re-installing Windows to no avail. I have also tried uninstalling Adobe Flash Player using your official uninstaller and then re-installing and yet I still get this problem.
System Specs;
AMD-FX 4100 Quad Core Processor @ 3.6GHz
8GB Corsair 1333MHz RAM
320GB Samsung SpinPoint HDD
Powercolour Radeon HD 6870 1GB
ASUS M5A97 PRO Motherboard
OCZ Fatal1ty 750W PSU

Your video card should be fine for GPU acceleration, but to rule this out can you try disabling hardware acceleration to see if that helps?
How do I disable or enable hardware acceleration?
If this works, please open up a new bug report so we can take a further look. Here's a page that describes what we'll need.
How do I troubleshoot and report problems with Flash Player Video?
Thanks,
Chris

Urgent!!Error in the front end when trying to view a report

Hi All,
I am getting this error when I am trying to view a report in the front-end.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
Please let me know if you have any ideas.
Thanks.
Vinay Sai Konduru

Have a look at your login crenditals in the Connection Pool.
Regards
John
http://obiee101.blogspot.com/

How do I close an app so that when I restart it, it doesn't just come back with the last screen, i.e. I want to be able to restart the app from new, not a follow-on

How do I close an app/session, such that when I restart it, it doesn't come backat where I left off, e.g. Safari, I want to restart with a new screen, not the one I previously closed from
Thanks

Depending on how the app is programmed, generally to force close an app, double tap the home button. You'll see the app icons and previews on the screen. Scroll sideways if needed to bring up the app in question. Flick the preview for that app up and off the screen. then single tap the home button or the home page preview to exit the mode
The app should then reboot from closed instead of just reopening

I'm getting an untrusted error screen when trying to visit google reader or blogger or even LOG OUT of my google account. this just started after a restart. very annoying. all sites work fine in safari.

don't know what else you need to know. running firefox 7.0.1 OS 10.6.8
worked fine earlier this morning.
just started happening. no work around.

I would recommend doing a full uninstall and upgrade to the latest version. I know it doesn't help you at all- but this does work on my machine with the same browser/OS configuration. Steps:
* Get the latest version: http://www.mozilla.org/en-US/firefox/new/
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
* Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
* Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
* Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

TS4006 I have find my iPad installed on my iPhone and iPad, I can find both devices from my iPhone, but get a set up screen when trying to locate from iPad.

Using my iPad, I cannot get find my phone/iPad to work. Works fine from my phone

Welcome to the Apple Community.
For the avoidance of doubt, you are looking in the find my phone app and not via the web browser.

Getting "No content was found" when trying to view .Mac movies

I can see my photos in my .Mac account on the Apple TV 2.0, but when I select a movie, I get a yellow warning triangle and the message "No content was found". The movies play just fine when I access the web gallery from a browser. Any ideas? -- Brad

I just answered my own question. My movie description fields were blank in iMovie. I added a description and shared to .mac again, and they can now be accessed via Apple TV. Seems like an Apple TV bug to me (or at least a poor error message). -- Brad

I get a black screen when trying to watch a movie on itunes

I have a laptop that I take to work. I am a teacher at a school. When using my school internet, I am able to see my movies in itunes. But, when I take my laptop home and use my internet, I get a black screen when trying to view a movie.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images, the permissions.default.images pref should be 1.
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

How to i get past the settings screen when trying to view my photostream? I just get stuck on the iCloudPhotos Settings page and can to any further. Really annoying and i guess there is a simple answer to it? Can anyone tell me?

Similar Messages

Maybe you are looking for