How to I remove the prepending on printed Word document titles?

I want to print out Robohelp projects to Word. In so doing I have chosen Individual Documents so that every corresponding HTML topic (which I've added in the Print Document Content) produces a separate .docx file. While this works well enough, the titles of the documents are prepended with "Chapter_##_". I just want topic ABC to produce an ABC.docx file, not Chapter_01_ABC.docx.
How do I remove the Chapter_## prepending?  
Thank you.

After generating, use F2 to rename the output.
Sorry but I don't think you can avoid it.
Please follow this link and submit a feature request.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

  • How do you remove the password from a pages document?

    Hello, for the first time, I created a password for a pages document, and I blocked the document too.
    I've tried to unblock and I can't, and I've tried to delete the password but I can't neither.
    Every time I try, when I close the document tells me, oh sorry pages couldn't save the changes.
    And it says, create a copy o cancel.
    I've removed the copies but now I can't delete the password or even delete it, because it says I'm not allow to.
    Please, help!!
    I don't know what else can I do.
    Thanks.

    Thanks for the information.
    On your Mac....open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the picture of the Time Capsule
    Click Edit in the smaller window that appears
    Click the Wireless tab at the top of the next window
    Change the setting for Wireless Security to None
    Click the Update button at the lower right of the window and allow a full minute for the Time Capsule to restart
    We are not responsible for any security issues that you have may have
    Reverse the process to select WPA2 Personal security when you want to enable security again.

  • Having deleted music from iPad, how do I remove the 'ghost image'?of song titles

    Having deleted music from iPad - how do I remove 'ghost image' that remains?

    In settings, go to Music and turn off "Show All Music"

  • How can I add the text from a Word document to an existing PDF that is my letterhead?

    I have a business letterhead created to a PDF file.  I'd like to add text from letters to this letterhead but do not know how.  Please help.

    Hi tatestar1,
    You would either need to use Acrobat to edit your letterhead PDF, or add the text in whatever application you used to create the letterhead in the first place, and then re-create the PDF. If you have the source file, then the latter may be easier.
    Best,
    Sara

  • How do I set the conversion settings for Word to ignore outline autonumbering for headings?

    I have a user manual in Word that uses outline autonumbering for Heading 1, Heading 2, etc. For example, "1.0 Introduction," "1.1 System Settings" and so on).
    I know when setting the conversion settings for FrameMaker, you can select the Ignore Autonumber option in the Conversion Settings dialog to keep only the paragraph content. I don't see anything like this for the Word Conversion Settings. Does this capability exist?

    To clarify:
    I have my paragraphs in Word set up with the required numbering properties using Word's Style settings. In Word, I want the headings to be numbered 1.0, 1.1, 1.1.1, etc. because the intent is for the reader to read through the manual like a book - from start to finish.
    I'm single-sourcing my manual from Word into RoboHelp to generate an online help package. However, I do not want my RoboHelp headings to be numbered because the user may or may not read each topic in order (in other words, they may only need to read what's in section 3.2, but won't get there by reading sections 1.0 through 3.1 first). I might also clarify that each heading is its own topic - so Section 3.2 would be a separate topic from 3.0 and 3.1.
    So for example, in Word, it reads like this:
         "1.0 Introduction
         [content goes here]
         1.1 System Requirements
         [content goes here]
         1.2 References
         [content goes here]"
    And in RoboHelp, I want it like this
         "Introduction
         [content goes here]"
         ---[end of topic]---
         "System Requirements
         [content goes here]"
         ---[end of topic]---
         "References
         [content goes here]"
         ---[end of topic]---
    Does that make sense?
    So how do I keep the numbering in my Word document, but set up the Conversion Settings in RoboHelp to ignore those numbers and only include the text following the autonumber? I have been able to do this when single-sourcing a FrameMaker book into RoboHelp.

  • I have purchased a new printer.  It is the same make as my old printer.  How do I remove the old printer from my Mac?

    I have purchased a new printer.  It is the same make as my old printer.  How do I remove the old printer from my Mac?

    you could see if that make of printer has an uninstaller (may come with the installer)
    or go to preferences, print and fax, and press the minus key   (  -   ) which should maybe remove it. Or ,do a a find, then type in the make of printer, and anything that looks like a printer driver for that make, well, maybe it's gotta go
    just an idea
    John B

  • How do you remove the extra space from the top margin when printing from a website? Already reset Firefox and checked my settings. Using Firefox 18 & Windows 8

    I have a 2" space at the top of pages that I print from websites. How do I remove the extra space? My margin settings are at .5"

    laderamacguy took a look at it and added a black shape over the tab. he suggested i use a different template next time, such as the black template.

  • Photosmart 8230. How do you Remove the print heads for cleaning?

    Hi guys, I have a Photosmart 8230. After a few lines of printing the black ink fades to almost nothing, all the colours are perfect. There are no error messages. I have done the self cleaning and alignment procedures and wasted a lot of expensive ink. The test page comes out with streaks on the black only. It has been suggested that I take the print head out and immerse it in hot water as a last resort. The question is, how do I remove the printhead? or should I use it as a sea anchor!!
    This question was solved.
    View Solution.

    I just did this to a HP Photosmart 8250 which is in the 8000 series range. I assume they are similar. I was an appliance repair man and have done a lot of other tings in my life, so I decided to take a shot at repairing my 8250 rather than junk it. For 3 Years it was great, only one paper jam, and fast great photos, so I didn't want to give up on it. HP will not repair printers for us, I think because it is too labor intensive, and they can sell a new one for what it would cost.
    I actually fixed my HP Photostat 8250. Its working but the color printing is not as good as it was, yet, but I am hoping that will improve as all of the colored inks work their way through the system.
    Taking one of these apart and putting it back together is like a Chinese puzzle, so its appropriate that they are made in China. Most of the parts inside can be easily damaged if you are not careful. The covers have very clever ideas to their design and how they snap in place. Take your time with the covers and use small tools.
    Getting it back in working condition is another matter. There is a 6 circuit pump and more than a few feet of tubing. I had the side covers off while I tested it and this pump seems to work in both directions. This pump is inside the left side cover. There is another motor with a timing wheel of some kind that stops and starts in both directions at the same time the printhead carriage is whipping back and forth printing. There are other motors also. These things are ingenious. It is surprising that I bought it for less than $100 on sale. It looks like a $1000 piece of equipment inside.
     It would probably be a good idea to not remove the left side cover, but if you do, be very careful around the clear timing wheel. it looks delicate. Below is from an email I sent to a friend and I am revising it to make sense. Remember this is something that really requires training to do this, but I see people today that have the guts to tackle all sorts of projects, so for what its worth, and you asked.
    Under the right side cover is a motherboard, with a bunch of cables plugged into it, small, larger and even ribbon cables. I found it necessary to remove the motherboard. I had a bit of experience working on Canon printers and I would also suggest you take digital pictures as you go so you can view them on your PC. I am also going through this because I don't like being told we can get anything repaired correctly today, its ridiculous that these printers have become just more throwaways. If you want to do this, as a guide, I must have spent 8 to 10 hours doing this, but now I could do it again in 2, that is the learning process.
    Once you get the top off the printer, you will see the printhead carriage. The carriage will be to the right side. The printhead is retained by two screws at the front, (take pictures) a spring clip at the rear and two screws that hold a plastic cover over the six ink hoses that plug into the printhead, its a manifold strip affair. You have to unplug the manifold to remove the printhead, but now I am not 100% sure its necessary to remove the printhead? The ink gunk you will see after you move the printhead to the left is no doubt most of the problem.
     Probably after the hot water treatment as described below, the built in printhead cleaner will be able to resume cleaning the printhead, after the hot water cleans the gunk from IT.
     I removed the printhead like I say below, but first do this. Under the printhead there is a little carriage with a patch of foam rubber that cleans the print head nozzles.This little device works back and forth while cleaning, but while it is parked, with the printer off, it is forward and you won't be able to move the printhead. Use a flashlight to be sure and you will see how to push the cleaner carriage  to the rear and then move the printhead carriage to the left. THEN, you will see the gunky ink mess that has accumulated. This gunky mess I think is the main problem. There are also some felt pads below the cleaning device to absorb some of the ink gunk. I don't know how the HP techs do this, but I used the hot water method below, I had nothing to lose. I would move the printhead first and then you can decide about removing it. I would make sure not to get any of the electronics wet and why I removed the motherboard and why I say take photos. Its hard enough to remember where the different screws alone go, when you are doing this. It can be done, mine is working, even if not perfectly, YET.  You need to be very careful with your fingers, because it is hard to find space to hold onto the printer and whay it might be a good idea to not remove the left side.
    They are so complicated, its just a matter of time before they get gunked up with ink and the printhead begins floating in the mess. I had nothing to lose so I removed the printhead, carefully, taped up all the hoses so they didn't dry out, Then I removed the motherboard to keep it from getting wet, THEN I held the messy ink end under the HOT water in the laundry tub and flushed out enough ink to dye a bathtub full of water. The hot water worked well. Then I let it all dry out. There are some delicate procedures to all of this and it takes time. I think that is why its very hard to find anyone to fix them. Its labor intensive and probably why HP won't repair them.  The print section is the problem, and why I won't buy an All in One printer, Fax, and Scanner. I do buy the extended warranty's now. If you tackle this, take your time, take photos, and good luck. By the way, the 8250 uses O2 print cartridges, is that the type of printer you have, but a lot of this applies to other printers and other brands, and I bet I am not the only one to do this. Before I started this the diagonstics showed no problems, so I assumed it was the the ink aspect of the printer, and not an electronic of mechanical problem. I hope this helps.
    ----- Original Message -----

  • How do I remove the print head in a PIXMA MX922 printer so I can clean or replace it?

    How do I remove the print head in a PIXMA MX922 printer so I can clean or replace it? The printer clean and deep clean features will not provide print quality corrections.

    Hi Happy,
    To remove the ink tanks and print head from the printer, please follow the steps located here.  Please note that we do not recommend cleaning the print head using any other methods other than the ones built into the printer, as it may do damage to the printer.  If performing at least one cleaning and two deep cleanings on the printer do not resolve the issue, the printer may require servicing; please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How does one remove the paper tray so the printer can be re-boxed for moving?

    Officejet 6600. How does one remove paper tray so printer can be re-boxed for moving

    Hi,
    The following video shows UN-BOXNG, hope they will help you to do a reverse:
       http://www.youtube.com/watch?v=jiwGnsjFTtw
    Please ignore he adv
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • In Preview, how do I remove the web address header and foot?

    In Preview, how do I remove the web address header and foot?
    Thank you
    Peter

    If you are referring to the preview of a webpage that you printed then in Safari in the Print dialog box is a tick box labelled 'Print headers and footers', if you untick this then they will not be included in the printout and also not included in the PDF version viewed in Preview.
    PS. You have to have 'show details' enabled in the Print Dialog to see the above option.

  • How do I remove the location line in a calendar appointment

    How do I remove the location line in a calendar appointment

    Hi Happy,
    To remove the ink tanks and print head from the printer, please follow the steps located here.  Please note that we do not recommend cleaning the print head using any other methods other than the ones built into the printer, as it may do damage to the printer.  If performing at least one cleaning and two deep cleanings on the printer do not resolve the issue, the printer may require servicing; please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How do I remove the white space from the bottom and side of my document?

    How do I remove the white space from the bottom and side of my document? (I'm not talking about printing, just viewing it on the screen.) There are about 6 inches of white space at the bottom and at the right hand side. I don't like this. On a blank new spreadsheet it's triple that amount of white space.

    The infinite canvas convention doesn't make a lot of sense for Numbers. When I'm viewing a spreadsheet and mistakenly scroll into white, empty space I think, "this is ridiculous - all of my content is fits on one screen. there's nothing over there."
    A (relatively) infinite canvas is logical for Microsft Excel because it's one big table. There are 256(?) columns by default and hundreds of rows on a sheet - there are cells outside what a user is looking at to see. However, when viewing a Numbers spreadsheet with a single 10 column 10 row table that fits on the screen, there's nothing else on it to scroll to.
    Numbers should distinguish between viewing a spreadsheet and editing one. When I'm just viewing, when there's no content outside the window it shouldn't scroll there. This window behavior is beyond annoying for Numbers on my iPad and iPhone.
    (Adding user-defined canvas size setting to my view mode / edit mode thinking would probably be the most complete solution to this now that I think about it.)
    Until now the way scrolling worked in Numbers has defied logic. Actually it still does lol. That said, thank you Yellowbox for providing a clear explanation. Much appreciated.

  • How do I remove the Skype Translator preview!?

    Hi.  
    So hard to even find where to submit a question!
    Please help.  I just want to uninstall!  No entries found in add remove programs.  How do I remove the translator preview!?
    I'm now using skype for my new postion and I can't affort to be a part of the translator preview.  It's affecting my system stability.  System is acting wonky and I'm getting many entries in my system log:
    Log Name: Application
    Source: Microsoft-Windows-Immersive-Shell
    Date: 5/22/2015 4:09:33 PM
    Event ID: 5973
    Task Category: (5973)
    Level: Error
    Keywords:
    User: HPENVY\Dwaine
    Computer: HPEnvy
    Description:
    Activation of app Microsoft.SkypeTranslatorPreview_kzf8qxf38zg5c!App failed with error: The app didn't start in the required time. See the Microsoft-Windows-TWinUI/Operational log for additional information.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" />
    <EventID>5973</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>5973</Task>
    <Opcode>0</Opcode>
    <Keywords>0x2000000000000000</Keywords>
    <TimeCreated SystemTime="2015-05-22T23:09:33.219596200Z" />
    <EventRecordID>167617</EventRecordID>
    <Correlation />
    <Execution ProcessID="5600" ThreadID="26552" />
    <Channel>Application</Channel>
    <Computer>HPEnvy</Computer>
    <Security UserID="S-1-5-21-4075998385-1554398878-[removed for privacy]-1001" />
    </System>
    <EventData>
    <Data Name="AppId">Microsoft.SkypeTranslatorPreview_kzf8qxf38zg5c!App</Data>
    <Data Name="ErrorCode">-2144927142</Data>
    </EventData>
    </Event>
    Subject/title text switched with another of the author's sentences in order to reflect post content.

    Hi,
    Are you trying to remove Skype entirely, or just get rid of the tool tray icon?
    IIRC, you get that icon as long as Skype is running in the background.  There's a checkbox in Skype options that will keep it from running on startup.  That will eliminate the icon but you won't get notified for incoming calls.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I can't make a? with out an E popping up??? How do I remove the E?

    I can't make a? with out an E popping up??? How do I remove the E?

    This does not sound like a Thunderbird problem. It sounds like a keyboard problem.
    Are you saying that you can use that same keyboard in '''any program''' eg: Word etc and you press 'a' key and get an 'a' printed but when you use Thunderbird to compose an email suddenly the 'a' key prints and 'E' ?
    I would have expected that this keyboard issue would apply to any program , Notepad, Word, etc.
    Check you have the correct language selected for the keyboard.
    'Control Panel' > 'Regional & Language Options' > 'Keyboards & Languages' tab

Maybe you are looking for