How to i restore my ipod touch without updating cuase i cant my connection is to slow and will give out, how to i restore my ipod touch without updating cuase i cant my connection is to slow and will give out
how to restore ipod touch without updating my conection suks
That is not supported by Apple. If you are getting a network timeout error, disabling the computer's security software usuallys resolves that error.
Similar Messages
-
I connected an older iPod to my new iTunes account to download my new library to it. Now my new account is not recognizing my password and I can not download anything to my library and iPod touch, can you tell me how to fix this?
Is your device recognized by your computer? If yes, copy the pictures and videos as shown in this article:
Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer
If it is not recognized, try this first: iOS: Device not recognized in iTunes for Windows
Disable autosync in iTunes, right click on it in the device list and choose "transfer purchases" to copy apps and other media bought in iTunes to your new library.
Do the same again and choose "backup", to create a manual backup without syncing.
Since your device will be erased due to the new iTunes library during the first sync, you can use this backup afterwards to restore your settings and data.
Set up at least one contact and event on your computer before you start, to be able to merge calendars and contacts. -
I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.
I don't see an issue, but if you mean why didn't you get most of your memory back you need to see what else is using storage. Go to Settings/General/Usage. Wait a bit for it to calculate storage allocation, then when it finishes you can see how much storage each app uses.
-
Okay, My iPod needed an update so I tried to update it and all it is showing is an white apple logo. Its been like that for a day now. I don't know what to do. Ive asked some people and they told told me to take it to apple, at&t or go on iTunes onto the computer. So I tried to restore it and I don't know how. Ive tried alot of things and I still cant get anything done with my iPod all it shows is an Apple
Hello, kyleedement11.
Thank you for visiting Apple Support Communities.
I would first recommend going through all of the steps in the articles below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If the issue persists or your device displays a connect to iTunes graphic, process the steps in article below.
Use recovery mode
Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
Plug the device's USB cable into your computer only.
Hold down the device's Home button as you connect the USB cable to it.
When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
Use iTunes to restore your device.
If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Jason H. -
my iphone 4 is disabled and asking to connect to itunes..... but i resently restored my laptop by which i deleted itune.. so i dont have any back up. so now how can i unlock my phone without restoring it to factory settings... because i eant all my stuff
there should ba a way to undisable it without loosing all of your data
-
i bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?
Hey jtom234412,
Thanks for the question. Based on the information you have provided, it sounds like your device is not detected in iTunes for Windows. The following resource may help resolve this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Furthermore, if your device is in recovery mode (displaying an iTunes symbol, with a plug), see the relevant information under Step 5.
Thanks,
Matt M. -
Got a replacement Ipod Touch 3rd Generation and backed up to store version on computer and now it will not work. Goes into restore mode but cant restore. Any suggestions
What happens when you try to restore? Error message?
-
what will i do next if i reset my ipod touch manually and all i can see is logo of itunes and usb connection?i cant use my ipod now :c
its to slow to connect..so i decided to run for diagnostic to know y if i cant connect to itunes eventhough i have account..heres the result:
Connection attempt to Apple web site was unsuccessful.
Basic connection to the store failed.
Connection attempt to Gracenote server was successful.
iTunes has never successfully accessed the iTunes Store. -
When i tried to download iOS8 on my iPad Mini it told me that I needed to connect my iPad to iTunes, I have done that and now it says I need to restore my iPad. How can I get my iPad working without losing everything on my iPad? I don't want to lose my apps and photos!
Help would be much appreciated!If you are getting the connect to iTunes screen then it's too late to take a new backup and/or copy anything off it. Prior to starting the update did you take a backup, either to the cloud and/or to your computer's iTunes ? If not then have you recently taken a backup that might have your photos and apps content/settings in it ?
As long as the apps are still in your country's store then you should be able to redownload them via the Purchased tab in the App Store app (and the Purchased link under Quick Links on the right-hand side of the iTunes store homepage on your computer's iTunes), and if the apps store their content on a server/cloud service then you might be able to get their content back from that - if they store their content on the device then you will need to have a backup.
For our photos you could try doing a search for programs that claim to be able to recover content from a device - I haven't used any so I can't suggest one. -
My son can't remember his passcode for his iPod touch and for some reason every time I try to restore it, the software gets updated and it starts processing it then it says there was an error and to try again later. Later, it still does and says the same thing. Is there any other way to unlock it without the passcode?
The only way to clear off the passcode is to restore the device. You could always try the restore process on another computer that has iTunes just to get the iPod working again, then you could plug it back into your comptuer to sync all of his content back on the iPod.
-
ok, so ios7 recently came out, but apparently its not available on ipod 4th gen? thats fine, but i really need to connect to the internet and i dont know why it wont work? someone please help! thank you ive reset my network settings, left it off over night, restarted and wiped the whole ipod, still nothing! anything is aprreciated, thanks x
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. (Is this wiping) See:
iOS: How to back up
- Restore to factory settings/new iOS device. (you mayhave done this by wiping)
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.
Likely this:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
Plzzzzz help
Does the iPod connect to other networks?
Do other devices now connect?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I got family guy: its a trap! with a digital copy to put on my ipod 4th gen, I tryed to move it from my library to my ipod and when it finally looks like it is going to work it says that it cant be moved to my ipod because it will not play on my ipod. Help please !!!!!!!
If you go to Settings do you see an entry for the Nike app? There is no way to delete or hide that app?
Have you tired using the Spotlight search? Maybe you just can't find it.
Next would be to restore a gain. First from backup then next to factory settings/new iPod.
The Nike app you can download/install
Nike+ Running for iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod touch (3rd generation), iPod touch (4th generation), iPod touch (5th generation) and iPad on the iTunes App Store
Does work on the iPOd. You just do not get all the information that GPS/cellular connection can get. You will still be able to get distance/footstrikes like the installed app an you do not need the shoe sensor.. It uses the built-in sensors on the iPod -
How do i delete my back up? I am trying to sync my ipod and it won't work. It says something about the back up being corrupt and that i must delete it and try again. If I do this will it delete my music on my computer/ipod?
Hello mig04,
While looking into the issue you are experiencing I came across some helpful information. In an article called iCloud: Troubleshooting creating backups found here: http://support.apple.com/kb/TS3992 there are a number of steps to help get your issue resolved.
General troubleshooting
General information
iCloud Backup requires a Wi-Fi connection to the Internet.
Automatic backups occur when you've plugged in your iOS device, locked the screen, and have connected it to Wi-Fi.
You can manually start a backup by tapping Back Up Now in Settings > iCloud > Storage & Backup (requires a Wi-Fi connection to the Internet).
iCloud Backup will provide helpful information and status messages related to backups at the bottom ofSettings > iCloud > Storage & Backup.
If automatic backups don't work as expected, test to see what happens when you start a manual backup by tapping Back Up Now at the bottom of the Storage & Backup screen.
Backups and restores both take time, especially if you have a lot of data or a slow connection. Depending on the size of your data and the speed of your network, you may need to give more time than you expected to a backup or restore.
Make sure you have at least 50 MB of free space available on your iOS device before you back up. If you have no space available on your device, iCloud Backup can fail in some cases. You can verify how much free space you have available on your iOS device in Settings > General > About.
Cheers,
Sterling -
i want to transfer my music from my ipod onto a windows computer. how do i do that without restoring my ipod and losing all of my music?
sstdanc wrote:
I haven't used my ipod in a very long time,
You can Only Sync to one iTunes Library at a time.
sstdanc wrote:
Hi, I no longer have the computer that I had used with my ipod.... I wanted to figure out how I can get both our ipods and itunes to work on the computer and not earse my music that is on my ipod??
Try > https://discussions.apple.com/docs/DOC-3991
Or > https://discussions.apple.com/docs/DOC-3141
Maybe you are looking for
-
OVMS - Local display cuts out after boot DMS 59 Video Card
Hey All - We use OVM/OVS on what you might call 'desktop servers'. We have several setup. We recently purchased some more machines that I am installing OVS onto and will add them to the cluster. However, these machines only video connection is DMS 59
-
Dear All, Since, i was not able to find a forum for basis, i'm using this forum for my query. I want to update SPAM inmy system.The current version is 9 and i want to update it. I have downloaded the current version sof SPAM, BUT UN
-
Transport Parameters in target system-Transport Path
Hi All, I have a BI system called BID(which is having refernce as CRD1 ) I have a BI system called BD(which is having source systesm as CD1) So when i am sending some BI related transport from BD3 system to BID system all CD1 related transports are f
-
Need help with a remove method..
Hello. I'm getting started on a project here to implement a recursive remove method that will remove any number from a list. I was given a test that the method must pass, but I'm having some trouble getting started. This is my second interaction with
-
Transferring Photos in iPhoto!
Hello there, I have questions about transfering my photos in Iphoto version 09 (in my old Mac OSX 10.5.8) to my new Mac OSX 10.9.1, is it compatible to do it?