How to i set up my outbox (for Send Later messages) so that I control when the messages are sent?

When i compose a message but do not want to send it right away, i click on Send Later and it goes into my Outbox. It remained there until i signed on to my email the next time. Then a message would come up asking me whether i wanted to send unsent messages. This gave me control over when the messages went out.
Something has changed (computer gremlins at it again) and now the messages go automatically the next time i log on.
I want my outbox set up as it was before, where i am asked whether i want the messages to go, so that i have that control.
I have tried to figure out how to do this using this help resource, and going via Tools, Account Settings etc., but haven't been able to find anything indicating how to set my outbox back to asking my permission to send unsent messages.
Hope someone can help.
Thank you.

check these settings:
Tools > Options > Advanced > Network & Disc Space
click on 'Offline' button
When starting up:
Select: 'always startup online'
Send unsent messages when going online
select: 'Ask me'
Download messages for offline use when going offline?
suggest 'Ask me'
click on 'OK' to save offline settings
click on 'OK' to save changes to Options.
Create an email addressed to yourself and use the Send Later option to put it in the Outbox.
Close and reopen Thunderbird.
You should get the prompt asking to send email.
If you choose yes then the email in the Outbox will be sent.

Similar Messages

How do I set up Mail only for sending? (Don't want to receive messages)

Maybe answer is somewhere on the board but I can't seem to find it...
I think in the past, on older version of Mail, I was able to set up a personal account on my work computer so that I could send from the personal account in Mail. Thing is, I don't want to see or store incoming personal messages (too much distraction at the office!).
Can Mail be set up this way?
If I uncheck "enable account," then I don't see option to send from that account. But if I check it, it shows me incoming mail from the account.
Thanks in advance.

How about Mail -> Preferences -> General: Check for New Messages and select "Manually" from the drop down.
Now Mail won't look for incoming mail unless you tell it to.
Regards
TD

How do I set up a ringmaster on my fax 2140 so that I can use the same line for phone

I have the HP 2140 Fax Machine and have always had a separate line for the fax. Now, I have only one line which is
to be used for both the telepone and my fax machine. This will save me approx. $200 per year.

cannot get my fax machine to except the drpd distintive ring. went to change the print cartg. and screwed something up? Can you help?

How do I set a defauly orientation for printing?

How do I set a default orientation for printing?

"Aperture has no such feature. The Apple web site has lot of downloads, some i'm sure should do what you want, in conjunction with Aperture. Allan"
Allan where on the Apple website would such downloads be? This is news to me! LOL!
Message was edited by: DVX100Shooter

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How can I set up my Mac for two users to share photos, music etc

How can I set up my Mac for two users to share photos, music etc?

On the Mac with the libraries you want to share:
iTunes Preferences click on the Sharing tab and put a tick in 'Share by library on local network'.
iPhoto Preferences click on Sharing and put a tick against 'Share my photos'.
When launching the same apps on other Macs on the network the libraries should be available, listed on the left.

Apple ID for my 9 year old - How can I set up an ID for my 9 years old. We have bought him an ITouch for his birthday, he also has a $30 iTunes card. To load up the iTunes card he needs an ID. When I try to set him up it says he is below the min age.

How can I set up anApple ID for my 9 years old. Every time I try it tells me he is bolew the min age. If this is the case how can he download free games and how can he redeem his birthday $30 iTunes card? I dont want him to use my ID as it has my credit card details.
I'm very fustrated with this as it seems the Apple kit is for 13 years and older only.
Cheers
Brad

That's great your 9-yr-old is responsible enough to handle an iTouch!
There's no way around the age limit. I suggest a family account that you, an adult, control.

How can I set a point size for staticTexts

Hi everyone
How can I set a point size for staticTexts?
    staticTexts.add({staticLabel:"Please select a tedious job"});
thanks
Teetan

Thank you Vandy
Thank you pixxxel schubser
And thank you Peter Kahrel
But Ho can call function for this script?
//======================================================================
Thank you Vandy
Thank you pixxxel schubser
And thank you Peter Kahrel
But Ho can call function for this script?
//======================================================================
var stringList = [
"01. digit at end: superscript",
"02. digit at beginning: superscript",
"03. notes applied to italic (table only)",
"04. Initial Cap+ markup",
"05. Small Cap + markup",
"06. del [ ] + markup",
"07. add an EM at beginning",
var win = new Window("dialog","Tedious Jobs_(\"TDJs\")");
this.windowRef = win;
win.grp = win.add ("group", undefined);
win.grp.alignChildren = "top";
win.grp.margins = 5;
win.grp2 = win.grp.add ("group", undefined);
win.grp2.orientation = "Column";
win.grp2.alignChildren = "left";
win.grp3 = win.grp.add ("group", undefined);
win.grp3.orientation = "Column";
win.grp3.alignChildren = "fill";
win.grp2.Txt1 = win.grp2.add ("statictext", undefined, "Please select a tedious job");
win.grp2.Txt1.indent = 0;
win.grp2.Ddl1 = win.grp2.add ("dropdownlist", undefined, stringList);
win.grp2.Ddl1.selection = 0;
win.grp2.sTxt1 = win.grp2.add ("statictext", undefined, "________________________________________");
win.grp2.sTxt3 = win.grp2.add ("statictext", undefined, "Be careful and pay attention in what you selected.");
win.grp2.sTxt3.graphics.font = ScriptUI.newFont ("Arial", "Regular", 10);
win.quitBtn = win.grp3.add("button", undefined, "Ok");
win.cancelBtn = win.grp3.add("button", undefined, "Cancel");
win.defaultElement = win.quitBtn;
win.cancelElement = win.cancelBtn;
win.quitBtn.onClick = function() {
win.close();
if (w.show() == 1) {
                var mRes = mStringList.selection.text;
                mSelection = mStringList.selection.index;
                app.insertLabel( "mDialog", mSelection.join() );    // to store dropDownList positions (as a string "," delimited)
                return mRes;
        } else { exit(); }
app.doScript('main()', ScriptLanguage.JAVASCRIPT, undefined, UndoModes.FAST_ENTIRE_SCRIPT, "TDJs");
function main(){
var myObject;
var myCheckSelection = false;
if(app.documents.length > 0){
if(app.selection.length > 0){
   switch(app.selection[0].constructor.name){
    case "InsertionPoint":
    case "Character":
    case "Word":
    case "TextStyleRange":
    case "Line":
    case "Paragraph":
    case "TextColumn":
    case "Text":
    case "Cell":
    case "Column":
    case "Row":
    case "Table":
mySelected = app.insertLabel( "mDialog", String(mySelection.selectedIndex) );     //     to remember selection’s set
if(app.selection && app.selection[0].hasOwnProperty ("tedious_works") );
      tedious_works();
else{
alert("Wrong selection. Please try again.");
function tedious_works() {
app.findGrepPreferences = app.changeGrepPreferences = null;
switch (mySelection.selectedIndex){
       case 1: {
   app.findGrepPreferences.findWhat = "^\\d";
   app.changeGrepPreferences.position = 1936749411;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
            break;
       case 2:{
   app.findGrepPreferences.findWhat = "(?i)\$note.+\$$";
   app.changeGrepPreferences.appliedCharacterStyle = "Italic";
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "（附[註注].+）$";
   app.changeGrepPreferences.appliedCharacterStyle = "Italic";
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
       break;
       case 3:{
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<a";
   app.changeGrepPreferences.changeTo = "A";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<b";
   app.changeGrepPreferences.changeTo = "B";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<c";
   app.changeGrepPreferences.changeTo = "C";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<d";
   app.changeGrepPreferences.changeTo = "D";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<e";
   app.changeGrepPreferences.changeTo = "E";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<f";
   app.changeGrepPreferences.changeTo = "F";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<g";
   app.changeGrepPreferences.changeTo = "G";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<h";
   app.changeGrepPreferences.changeTo = "H";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<i";
   app.changeGrepPreferences.changeTo = "I";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<j";
   app.changeGrepPreferences.changeTo = "J";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<k";
   app.changeGrepPreferences.changeTo = "K";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<l";
   app.changeGrepPreferences.changeTo = "L";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<m";
   app.changeGrepPreferences.changeTo = "M";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<n";
   app.changeGrepPreferences.changeTo = "N";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<o";
   app.changeGrepPreferences.changeTo = "O";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<p";
   app.changeGrepPreferences.changeTo = "P";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<q";
   app.changeGrepPreferences.changeTo = "Q";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<r";
   app.changeGrepPreferences.changeTo = "R";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<(?<!’)s";
   app.changeGrepPreferences.changeTo = "S";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<t";
   app.changeGrepPreferences.changeTo = "T";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<u";
   app.changeGrepPreferences.changeTo = "U";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<v";
   app.changeGrepPreferences.changeTo = "V";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<w";
   app.changeGrepPreferences.changeTo = "W";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<x";
   app.changeGrepPreferences.changeTo = "X";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<y";
   app.changeGrepPreferences.changeTo = "Y";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<z";
   app.changeGrepPreferences.changeTo = "Z";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
       break;
       case 4:{
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<A";
   app.changeGrepPreferences.changeTo = "a";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<B";
   app.changeGrepPreferences.changeTo = "b";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<C";
   app.changeGrepPreferences.changeTo = "c";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<D";
   app.changeGrepPreferences.changeTo = "d";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<E";
   app.changeGrepPreferences.changeTo = "e";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<F";
   app.changeGrepPreferences.changeTo = "f";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<G";
   app.changeGrepPreferences.changeTo = "g";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<H";
   app.changeGrepPreferences.changeTo = "h";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<I";
   app.changeGrepPreferences.changeTo = "i";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<J";
   app.changeGrepPreferences.changeTo = "j";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<K";
   app.changeGrepPreferences.changeTo = "k";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<L";
   app.changeGrepPreferences.changeTo = "l";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<M";
   app.changeGrepPreferences.changeTo = "m";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<N";
   app.changeGrepPreferences.changeTo = "n";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<O";
   app.changeGrepPreferences.changeTo = "o";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;

HOW DO I SET UP MY FAX for a HP PHOTOSMART PLUS B210 ?

HOW DO I SET UP MY FAX FOR A HP PHOTOSMART PLUS B210 EPRINTER ?

Hi shea31,
Unfortunately, this printer doesn't have a fax function. You can also check the printer's product specifications.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Cheers!
* If this post has helped you, the White Kudos star on the left is a great way to say thanks!
* Please mark Accept As Solution if it solves your problem so other users can benefit as well.

How can I set up auto respond for email

How can I set up auto respond for email?

Hey there jimmac169,
It sounds like you want to have the Mail app automatically reply to emails that come in. You can do this in the app itself, but in order for the function to work, Mail needs to be open. Take a look at this info from the following article:
Mail (Yosemite): Reply to, forward, or redirect messages
Automatically reply to or forward messages
Mail must be open before it can automatically forward or reply to messages. If you want to send automatic replies when Mail isn’t open—like when you’re on vacation—check with the provider of your email account.
Choose Mail > Preferences, then click Rules.
Click Add Rule, then type a name for the rule.
Indicate whether any or all of the conditions must be true for the rule to be applied.
Set the conditions that determine which messages to automatically reply to or forward.
Choose options from the “Perform the following actions” pop-up menu.
Forward messages: Choose Forward Message from the first pop-up menu, then enter the email addresses where you want to receive the forwarded messages. Click Message, then enter any text you want to include with the forwarded message. For example, you could explain that you’re automatically forwarding messages.
Reply to messages: Choose “Reply to Message” from the first pop-up menu, click “Reply message text,” then enter your reply. Mail includes the full text of the original message in your reply.
Click OK.
Carefully consider the rules you create. If they’re too broad, messages can be sent inadvertently or create loops (replies to replies you sent). If possible, test the rules.
Thank you for using Apple Support Communities.
All the very best,
Sterling

How do I set up e print for my laserjet P1102 for Mac

how do I set up e print for my laserjet P1102 for Mac? I have downloaded soft ware & ejected disc as directed & don't know next step. Thanks

Hi,
As you have setup the printer now you should be having the printers IP address.
If not please connect your printer to wifi network with a valid internet network and get the IP address by printing the config page.
Make sure you connect Mac Book to the same wifi network.
Now type the IP address on a browser in your Mac Book and hit enter.
You should be able to see the Embedded Web Server page of your printer.
Now navigate to Web Services Tab.
Click on Enable to enable eprint on your printer.
This will enable the web services on your printer and print the information sheet.
The information sheet will contain the claim code for your printer.
The <Claimcode>@hpeprint.com will be your email ID for the printer.
Kind Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

How do you set up nested rules for iTunes smart playlist

How do you set up nested rules for a iTune smart playlist

Hello \"alice\",
It sounds like you want to add additional criteria to your Smart Playlists. I found an article with steps you can use to refine your Smart Playlist. Step 2 specifically has what I think you are looking for:
2. To have iTunes add songs that match specific criteria, make sure to select "Match the following rule," then make your selections from the pop-up menus.
For example, you might want iTunes to only add songs that are by a particular artist, or songs with at least a four-star rating.
To add additional matching criteria, click the Add button.
You can find the full article here:
iTunes: How to create a Smart Playlist
http://support.apple.com/kb/ht1801
The article says it is archived. In the current version of iTunes, in step 1 you will select File>New>Smart Playlist. Also, if you need to edit an existing Smart Playlist, you can right click (or hold command while you click) on it and select Edit Smart Playlist.
Thank you for using Apple Support Communities.
Best,
Sheila M.

How do you set up repeating alerts for a new voicemail

how do you set up repeating alerts for a new voicemail

makblv wrote:
Please, Apple, offer this convenience to your loyal customers. Thank you.
If you want Apple to know how you feel, Submit your feedback directly using the appropriate link on the Feedback page:
http://www.apple.com/feedback

How do I set individual sound alerts for multiple email accounts?

How do I set individual sound alerts for multiple email accounts?

Here: http://www.guidingtech.com/15275/get-different-notifications-per-mail-account-io s-6/
Long and short of it, the settings can be individually changed under Notifications. Select Mail and then the account you want to change the sound to.

HT201320 how do i set up read receipts for emails from the iphone?

how do i set up read receipts for emails from the iphone?

That is not a feature of the Mail app. Check with your email provider to see if it's a service they offer.

How to i set up my outbox (for Send Later messages) so that I control when the messages are sent?

Similar Messages

Maybe you are looking for