How to idenfity Config Change

Hi all,
How can one identify the change in config without knowing transport request. In other terms if someone change system config how to identify who made changes and which transport request is used?
Thanks
Shiva

Thanks for your responses gents,
i got the solution and for the benifit of others posting the solution
Go to Transport organiser using SE03 and click on "Search for Objects in Requests/Tasks.In selection screen you can enter object name or simply select IMG activity e.g:Master data,Transaction,Basic Funtions...etc.It would display Transport requests which were used. Click on transport and you will be able to find what was changed and who.
Thanks
Shiva

Similar Messages

How to add config changes in Transport Request

Hi Experts,
We did some config changes in Logistics - General=>Material Master=>Configuring the Material Master=>Define structure of Data screen for screen sequence / Assign Secondary sequence / Maintain Order of Main and Additional Screens.
But while saving this config of Assign Secondary sequence / Maintain Order of Main and Additional Screens its not asking for Transport Request.
Even i checked in the menu of EDIT-Tranport entries, but the menu's are in disable mode.
Can anyone guide me how to add this two fields config changes in to TR?
Thanks and regards,
Anandhan

Hi,
This is really strage.
However you can try the following.
upon entering the config node, use the first menu option in which option "transport" would be there.
Upon clicking it, the same table opens in display mode.
Select the entries that you have created and use the option "include in transport"
When asked for, provide teh transport number.
Alternatively you can create a transport and them use SE10 to include entries from tables that you can select.
ou may need teh help of an experinced ABAPer or Basis to do it if you are not confortable doing it yourself.
However if the config effects multiple tables, then this is not a viable option as you need to know all the impacted tables.
hope this helps.

How to save config changes on the MICA Modems for a 3640

Hi!
I have a NM-6DM with MICA modems. While fine tunning the modem I changed some values which now I want to save. I have tried the at&w, at&w1 and at&w2 but I keep receiving ERROR.
Any help
thanks,
Mario S.

To configure any modem that is connected to a
Cisco router (whether an internal or external one),
always use a modemcap and "modem autoconfigure".
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a008009491b.shtml#configmodems
Cheers,
Aaron

How do I save changes to about:config?

I change the keyword url in about:config but don't know how to save this change. If just close the tab or the browser, the old settings reappear.
How do I save changes to about:config?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.com/kb/Preferences+are+not+saved

How to migrate the transaction launcher config changes

hi friends
i followed this blog on transaction launcher on WEBUI and its working fine.
/people/vikash.krishna/blog/2008/09/23/crm-2007-how-to--2-a-transaction-launcher
but when i do these config changes in SPRO,it didnt ask me any transport request to save into.
how can i migrate these to QA and Prod?
any idea.?
thx,
Niraja

Thanks for your reply Gerhard,
But when i did the SPRO changes for the Tlauncher, i didnt ask me any Transports, Its just got saved.
I have one question here, when i follow ur steps, will it transport all the data or just my new changes? Meaning new Tlauncher data?
In SPRO, how can i see the versioning, the current version.
for example, when i go to Copy/Delete Tlauncher, in SPRO, how can i see the current Transport for that SPRO path?
Could u pls help me,
thanks,
Niraja

%ONLINE-SP-6-REGN_TIMER: multiple line cards down after config change

Hi,
I was wondering if someone could help.
I recently changed the entire configuration on two 6509 switches, and the fibre modules on slot 7 and 8 have gone down on BOTH switches. It would be easy to say that its a hardware fault but I cannot understand how module 7 and 8 can go down on both switches. Initially I thought it maybe due to IOS bug 22-33.SXI2a.bin" so I upgraded it to s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin but it still down.
These are the actions I have carrried out to try resolve the issue:
- Reverted back to orginal configs but no luck
- Tried to use "power enable" command but the status light on both modules seems to turn red and then go off again.
- I have also tried to put one of the fibre modules into a different slot but no joy
- Upgraded the IOS from 22-33.SXI2a. to 122-18.SXF12a
I am running out of ideas.. can anyone help ? I am sure that hardware fault cannot occur on BOTH modules 7 & 8 on BOTH switches after config change.
The error in the log shows that modules "failed to bring online because of registration timer event". I understand this means that it is unable to download the image within the allocated time.. maybe I could manually copy the image onto the line card if that is possible ?? any ideas ?
Daughterboard         WS-SUP720          SAL135063V2 4.0    Ok
7 Centralized Forwarding Card WS-F6700-CFC       SAL1419HKJK 4.1    PwrDown
8 Centralized Forwarding Card WS-F6700-CFC       SAL1419HAG0 4.1    PwrDown
Mod                                                      Hw    Fw           Sw           Status
7 5475.d016.075c to 5475.d016.075f   3.1   Unknown      Unknown      PwrDown
8 5475.d0bb.7404 to 5475.d0bb.7407   3.1   Unknown      Unknown      PwrDown
System image file is "disk0:s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin"
BOOT variable = disk0:s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin,12;sup-bootdisk,1;
CONFIG_FILE variable =
BOOTLDR variable =
Configuration register is 0x2102
Standby is not present.
May 28 17:25:10.352: %C6KPWR-SP-4-DISABLED: power to module in slot 7 set off (Module Failed SCP dnld)
May 28 17:25:10.452: %ONLINE-SP-6-REGN_TIMER: Module 8, Proc. 0. Failed to bring online because of registration timer event
sm(cygnus_oir_bay slot8), running yes, state wait_til_online
Last transition recorded: (disabled)-> disabled (disabled)-> disabled2 (restart)-> wait_til_disabled (timer)-> may_be_occupied (timer)-> occupied (known)-> can_power_on (yes_power)-> powered_on (real_power_on)-> check_power_on (timer)-> check_power_on (power_on_ok)-> wait_til_online
May 28 17:25:10.452: %C6KPWR-SP-4-DISABLED: power to module in slot 8 set off (Module Failed SCP dnld)
May 29 11:41:16.601: %SYS-5-CONFIG_I: Configured from console by console

Would anyone know if the line cards are maybe failing due to Embedded Event Manager configuration ? The person who configured this lab has left the company so I am not sure what the EEM configurations actually mean.
The reason i am suspecting the EEM configuration is because the error in the log seems to suggest the module failed due to registration timer event.
May 30 14:47:00.366: %ONLINE-SP-6-REGN_TIMER: Module 8, Proc. 0. Failed to bring online because of registration timer event
Just trying to check all the possibilities as I have tried everything else,
event manager directory user policy "disk0:/fcp_eem"
event manager directory user repository tftp://10.11.x.x/xxx/
event manager scheduler script thread class default number 10
no event manager policy Mandatory.go_switchbus.tcl type system
event manager policy rp_test.tcl type user
event manager detector rpc ssh acl 60 event manager directory user policy "disk0:/fcp_eem"
event manager directory user repository tftp://10.11.216.145/FCPD/
event manager scheduler script thread class default number 10
no event manager policy Mandatory.go_switchbus.tcl type system
event manager policy rp_test.tcl type user
event manager detector rpc ssh acl 60

Generate SNMP TRAP when config changes

Hello,
Is there any way to generate a SNMP trap when new config is saved in ASA 5510?
We are running ASA 8.3
Thanks.

I have a clue about how to do it.
I use in the asa the fallowing command:
snmp-server host DMZ 10.153.50.5 community *****snmp-server enable traps entity config-change fru-insert fru-remove
And I setup a snmptrapd on a lin
/etc/snmp/snmptrapd.conf# Example configuration file for snmptrapd## No traps are handled by default, you must edit this file!# authCommunity log,execute,net public# traphandle SNMPv2-MIB::coldStart /usr/bin/bin/my_great_script coldux box.
But it doesn´t works when I do a config change, it doesn´t generate anything on the linux box log.
Any idea?
Thanks.

What SRM config changes will need to take place with a change to Plant

Hi
Please could you tell me What SRM config changes will need to take place with a change to Plant, Co Code, Purchasing Org, Purchasing Group,
Cheers
B

Yes Disha loads more questions,
is it simply a GET_LOCATIONS_ that I need to run once all the new plants have been created in R3 or do i need to create the plants in SRM?
With one Purch org to one co code to one plant how will this effect the workflow start conditions
How will the be differnt to a on Purchasing Org to many co codes to many plants?
Any thing else you think that I might need to do with this change
Thanks
B

Required config changes to move DB to another server

Can someone provide instructions on what config changes need to be done to move the database to another server? I am assuming there is documented instructions to accomplish this task, but I can not find them.
Thanks.

Hi Doug,
I have not tried just moving the DB, but check out this link.
https://service.sap.com/~sapidb/011000358700000307832005E/TemplatesWebAS_640sr1.htm
Click on the link for "Homogeneous and Heterogeneous System Copy". This is the documentation on how to copy Web AS systems. It has info on doing the DB copy. I think you will find what you need there.
John

How can i config WLS7 and iPlanet LDAP

How can i config WLS7 and iPlanet LDAP?
failed during initialization. Exception:java.lang.SecurityException: Authenticat
ion for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>

Yos:
Series of steps to get WLS working with some external LDAP server follows:
I. create a new domain /mydomain
II. start server
III. open WebLogic console in a browser
IV. in left frame, go to
security->realms->myrealm->providers->AuthenticationProviders and click
V. in right frame, click on “Configure a new iPlanet Authenticator”
VI. In the new screen, under General, make sure the Control Flag is set to Required,
select a name for this authenticator, and click Create.
VII. Select iPlanet LDAP tab and fill in values for Host, Port, Principal where
these values reflect the settings for your LDAP server. (Note: the default
principal for an iPlanet LDAP server is uid=admin, ou=Administrators,
ou=TopologyManagement, o=NetscapeRoot). Click Apply.
VIII. Click on Credential: Change. At the new screen, enter the credential
associated with the Principal that you entered in step VII in both boxes. This will
be the password that is used to do a bind to your LDAP server with the principal.
Click Apply.
IX. Select Users tab and make sure these properties accurately reflect the structure
of your LDAP server. Most of the time the only property that needs to be changed is
the User Base DN property, from ou=people,o=example.com to
ou=people,o=myCompany.com. Click Apply.
X. Select Groups tab and make sure these properties accurately reflect the structure
of your LDAP server. Most of the time the only property that needs to be changed is
the Groups Base DN property, from ou=people,o=example.com to
ou=groups,o=myCompany.com. Click Apply.
XI. Now, the boot identity of your server absolutely must be a user that exists on
your LDAP server. You must also have an “Administrators” group on your LDAP server,
and the boot identity must be a user that exists in this “Administrators” group, or
the server will not start. So open your LDAP console (this will be a console that
is specific to the LDAP server you are using) and use the management tools to create
the “Administrators” group and a user that you place in the “Administrators” group
that is the boot identity that you use to start WebLogic.
XII. Make these changes and restart the server.
XIII. You can verify that the LDAP setup is correct by doing a thread dump. You
should see a thread like:
“LDAPConnThread localhost:389" daemon prio=5 tid=0x8d9b308 nid=0x8f8 runnable
[0x9e2f000..0x9e2fdbc]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:186)
at java.io.BufferedInputStream.read(BufferedInputStream.java:204)
- locked <3281d98> (a java.io.BufferedInputStream)
at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:420)
where “localhost:389” is the server name and port of your LDAP
server. This means that your Authenticator has been set up correctly.
XIV. Now you can delete your default authenticator. Open the WebLogic console and
go to security->realms->myrealm->providers->AuthenticationProviders in the left
frame, and click
XV. In the right frame, look for DefaultAuthenticator and click on the trash can to
the far right. Say “Yes” when it asks if you are sure, then click Continue.
XVI. Restart the WebLogic server. If the server boots correctly, you’re done.
Everything is working correctly.
Please note that the "default authenticator" refers to the embedded LDAP server that
ships with WebLogic.
Hope this helps.
Joe Jerry
Yos wrote:
How can i config WLS7 and iPlanet LDAP?
failed during initialization. Exception:java.lang.SecurityException: Authenticat
ion for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>

How to transport Parameter changes in a crystal report

Hi All,
Very Good morning!!!
I have designed a crystal report with static parameters. Earlier i used to have a dropdown kind of input selection for my parameters.
Now i got a new requirement for a direct input in the field....tht means no dropdown ...single date field is to be entered directly.
Accordingly i have removed the dropdown and changed to a single direct date field. I saved these changes to a request and transported to quality. Not sure whether the parameter changes are collected into a request.
Whereas i couldn't found any changes of my parameters in quality. They are as same dropdown manner in the quality whereas i need them to be a direct field date entry which did not affected the quality server after transporting the changes.
Could some one please let me know how to reflect these changes in quality server regarding parameter changes in a crystal report for BW.
Thanks in Advance.
Jitendra

Please re-post if this is still an issue or purchase a case and have a dedicated support
engineer work with your directly

How to prevent PO changes in ME22N after Order acknowledgement?

Hi everyone,
        Can anyone tell me how to prevent PO changes (ANY) in ME22N after Order acknowledgement?
        I would like to make it possible without release strategy process or authorizations.
        Do you know some User Exit or Customazing way?
Regards.
Jaime S.

Dear Jaime S,
You can do this by restricting in authorization SHDO and also by marking "changes not possible after release" in Release strategy procedure.
And also you can navigate the menu to, SPRO------>IMG------>Material Management--->Purchasing(OLME)------->Purchase Order---->Define screen Layouts at Document Level---->And go to ME22n And Select the right parameter and in this you can make it display, optional or required entry for the fields.
Regards,
Manjunath B L

How do I save changes to a PDF with AxAcroPDFLib.AxAcroPDF?

I am using C# and have created a regular Windows form. I have used COM and registered AxAcroPDFLib.AxAcroPDF. Here is my code;
axAcroPDF1.LoadFile("myfile.pdf")
axAcroPDF1.Show();
MessageBox.Show("Showing...");
This works fine. But, just like the browser, I cannot save changes to the PDF. I have the full version of Adobe Acrobat installed, Standard 8.0. I also have the Pro. version 7.1.0 on another PC. When I click save I just get prompted to save it locally, just like I was in the browser.
If I edit these normally, just via Adobe Acrobat Standard, I can save my changes. I cannot do it via the AxAcroPDFLib library.
How do I save changes to my adobe acrobat pdf file in my program? Thank you for any help. please.

I did this after I wrote this. I have looked at the documentation but I can't find what I am looking for. Is there another way to open a file for viewing that has the full capabilities or using the normal program...one that uses something besides AxAcroPDFLib.AxAcroPDF. The sample that did have a view used AxAcroPDFLib.AxAcroPDF so it wasn't helpful. All I need is normal program functionality of adobe standard or profession within the application. The users have a full version installed on their PC.
Thanks again.

How can I find my password for iTunes? Forgot it and can't see how to restore or change

How can I find my password for iTunes? Forgot it and can't see how to restore or change it. It is not the same as the apple id password - or so my iPhone iTunes says - Help

I don't want to reset my apple ID password. I know it's right. It doesn't work on Itunes to restore my phone. All the passwords I know are not working. I want to know why.

I have Iphone 4s, and the phone will activate itself again. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? I would like an answer as soon as possible ... Thank you very much.

I have Iphone 4s, and the phone will activate itself again. This I have verified, but when I shall put this onto my phone, so the phone will not approve the newusername and password. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? Silly to buy a new phone just for this .... The phone is almost three years old. How long can weexpect this to last? I would like an answer as soon as possible ... Thank you very much.

It sounds like your device might be in Activation Lock. Is it asking your to enter in an Apple ID & password, but only showing you the first letter of the email address and then some dots? Example: j•••••@icloud.com?
If so, do you recognize that email? Do you have an Apple ID that fits the same format? If so, then go to www.cloud.com, log in with that Apple ID & password, and see if under Find My iPhone it shows this device. If so, turn off the device, then remove the device from the list.

How to idenfity Config Change

Similar Messages

Maybe you are looking for