How to identify a job in sm37

Hi gurus,
am new to BW. could any one please denote some processes that are run in sm 37 and denote wat it stands for? for example ODS activation it is BI_ODSA* etc
Thanks,
anil

Hi Anil,
you can copy the tech name or generated name in some cases and use it in SM37 to find out the status of the job.
Today - Indian Republic Day.

Similar Messages

How to kill a job in SM37

hi All,
can someone wxplain me how to kill a job in SM37 which is delaed by 10,000 secs.
cheers

Hi Rase,
goto SM37 and click on the active selection and enter the jobname and then click excute the particulr job should appear highlight the jobname then click on the stop iconthat appears on the taskbar( 3 rd from left)
or goto SM50 Click on the process and select process->stop without core
or
set a running infopack of the chain (in RSMO) to red, thats will stop the chain (if there are no parallels, else set all parallels to red).
****Assign Points If Helpful****
Regards,
Ravikanth

How to identify all jobs that were running at a particular point in time?

TES 6.1.0.391
From time to time, we have a need to identify all jobs that were running at a particular moment in time on a particular agent (we have about 800 agents)...eg "what was running ("Active") at 09:03:42 a.m. two days ago on agent XYZ?"
I've used other job schedulers, and have written queries to extract that info, but I thought before I work on one for Tidal that I would ask the community....how are you getting this info?
Any help is greatly appreciated, thanks.

I had some time over the weekend and was able to come up with something of use.
Please note that our repository is MSSQL
select jobmst_prntname as ParentJobName,
a.jobmst_prntid as ParentJobId,
a.jobmst_id as JobId,
a.jobdtl_id as JobDetailID,
jobmst_name as JobName,
b.owner_name as JobOwnerName,
c.jobdtl_cmd as JobCommand,
c.jobdtl_params as JobParameters,
jobmst_lstchgtm as LastUpdateDate,
d.nodlstmst_name as AgentListName
,[jobrun_status]
,[jobrun_duration]
,[jobrun_time] as starttime
,DATEADD(ss,jobrun_duration, jobrun_time) as endtime
,f.nodmst_name as AgentName
,[jobrun_owner]
,[jobrun_cmd]
,[jobrun_rundt]
,[jobrun_batch]
,[jobrun_params]
,[jobrun_launchtm]
,[jobrun_fullpath]
from Admiral..jobmst a,
Admiral.dbo.[owner] b,
Admiral.dbo.jobdtl c,
Admiral.dbo.nodlstms d,
Admiral.dbo.jobrun e,
[Admiral].[dbo].[nodmst] f
where a.jobmst_owner=b.owner_id
and a.jobdtl_id=c.jobdtl_id
and c.nodlstmst_id=d.nodlstmst_id
and e.jobmst_id=a.jobmst_id
and e.nodmst_id=f.nodmst_id
and jobmst_active='Y' --This condition shows only the active jobs
and jobrun_rundt ='2014-01-26' --This is the job run date. If the job finishes the next day, that is what is going to be used.
and f.nodmst_name = 'abc' --This is where you input your agent name
Hope this helps!

How to CANCEL ACTIVE JOB in SM37??

Hi Experts,
Pls. let me clarify one simple doubt that, am trying to CANCEL a ACTIVE jon in SM37, bcoz its taking too much time, like 60 hrs, so am suspecting that, some thing is wrong in report prog./SELECT!!!
So, I tried, SM37>MENU>JOB-->CANCEL ACTIVE JOB,
but, its not getting canceeled or DELETED??
So, How Cal I CANCEL/DELETE a ACTIVE job in SM37??
thanq

thanq,
its worked out.
but, i dont know that Wht happened to my browser/SDN/system, I am unable to see the Rewarding points option!!!!!!!!!!
So, as soon as i see this option, will post the reward points.

How to find the job and job status from RSPCM

hi all,
suppose we got an error and in rspcm the process was failed.i want to know the status of that particular job.and if any i want to stop that job in SM37.
plz tell me how to find the job and job ststus from RSPCM...and how to stop that job in SM37
thanks,
jack

Hi Jack,
RSPCM: T.Code
This transaction is used to monitor the process chains
First:
here you need to add the process chains into the sheet
Second:
Then you can monitor the process chains in this transaction code
Like you can see the : status ,proces chain ,Last run date ,Last run time ,Log ID
Status : Green when sucessful,Yellow when running & Red when you get errors
Now when yoy click on any of the process chain in RSPCM you will go to the LOG VIEW as you see in RSPC transaction
SM37:T.code
This transaction is used for Job Overview
you can see many options in SM37
like Released,active,cancelled,finished,etc
Just select the ACTIVE jobs and also pass STAR in JOB ID & USER ID
here you can only see the active jobs
Goto Step in toolbar
select the program displayed
then chose option GOTO - Variant in main menu bar
in the variant you can see the job belong to which Process chain
if you want to cancel this job come back to SM37 Display screen
Select the Job and select the JOB DETAILS tab in Tool Bar
Collect the WIP ( Work Permit ID)
Go to SM50 T.code and find the WIP
in Main Menu Bar you find the option Cancel with Core choose this it will cancel the Job
Regards
Hari

How to identify what are all the events are created in background jobs?

Hi all,
how to identify what are all the events are created for background jobs. And what events gets triggered for a particular job.
thanxs
haritha

Hi Haritha,
JOB is a program which starts to a determined point of time and executes some standard programs in the system. JOBs can be planed to a determined point of time on the regular basis (every night, for example) or to some discret time moments. So, the JOB can be planed and then will be started automatically without the manual start.
Realtime programs are understood in the most cases as actual program execution which is started by somebody to the actual moment of time.
Typically per JOBs some special processes will be started that should be executed automatically and regularly: for example, IDOC application, some correction reports, statistic updates etc.
Standard jobs are those background jobs that should be run regularly in a production SAP System These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
Use
As of Release 4.6C, the Job Definition transaction ( sm36 ) provides a list of important standard jobs, which you can schedule, monitor, and edit.
Standard jobs are those background jobs that should be run regularly in a production SAP System. These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw70/helpdata/en/24/b884388b81ea55e10000009b38f842/frameset.htm
About Events:
Events have meaning only in the background processing system. You can use events only to start background jobs.
Triggering an event notifies the background processing system that a named condition has been reached. The background processing system reacts by starting any jobs that were waiting for the event.
Types of Events:
There are two types of events:
1.)System events are defined by SAP. These events are triggered automatically when such system changes as the activation of a new operation mode take place.
2.)User events are events that you define yourself. You must trigger these events yourself from ABAP or from external programs. You could, for example, signal the arrival of external data to be read into the SAP system by using an external program to trigger a background processing event.The event scheduler processes an event if the event is defined in the system.
For example, if a system (System 1) receives an event from another system (System 2), the event scheduler of System 1 processes the event only if it is defined in System 1. That event does not need to be defined in System 2 (the sending system).
You define an event by assigning a name (EVENTID) to it. When defining an event, you do not define the event arguments.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw04s/helpdata/en/fa/096e2a543b11d1898e0000e8322d00/frameset.htm
When you schedule the process chain or infopackages the jobs associated with it run in the background mode. In case you want to create a job for a specific activity you can do so in SM36. You would be creating jobs that would get executed in any one of the options:
1. Immediate
2. Date & Time
3. After event.
4. After job.
5. At Operation mode.
In case you want to view the job logs go to sm37.
Also Pls check DB02 for database performance and ST03 for workload .
Analyse u will have an idea ,
*pls assign points,if info is useful**
Regards
CSM reddy
null

How to identify the related job, after sheduling a infopackage?

Hi,
Anybody explain that how to identify the related job after scheduling a infopackage in the BW system?

Hi Aditya,
Goto SM37->Search Job BI_BTCH*
Job Prefix.
http://help.sap.com/saphelp_nw70ehp1core/helpdata/en/da/0318025d64a84b94542641ed77ee74/content.htm
Hope it helps.
Thanks and Regards,
MuraliManohar.
Edited by: Muralimano on Jun 5, 2011 9:38 AM

How to find process chain using background job in sm37

How to find process chain using background job in sm37

Better is to select the job.
Select (Define) Step (s) or F6.
Select the line and Menu Goto>Variant.
The variant contains the name of the CHAIN and its VARIANT.
Success
We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
We could not find the scheduled job via SM37.
Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
We delete these entries via function BP_JOB_DELETE....
Edited by: Jack Otten on Jul 9, 2010 2:50 PM

How to edit the job name in SM37

Hi All,
I have job in SM37 with the mane ZBI_PROCESSING and the Job in Release status. Now I want to change the Job Name to Z_PROCESSING_SS. Please let me know how to edit the Job Name.
Regards,
Ravi

Hi Ravi,
In SM37 when you have the list of all jobs, right-clic on the job you want to rename, copy, enter the new name.
Then you can delete the first job. The copied one will then be executed.
Regards,
Fred

How to check who has cancel jobs in SM37

Hello every one.
Can any one explain how to check who has cancel jobs in SM37(job overview).
Is it possible to know such logs.
In sm37 its only gives details about jobs what ever.
Thanks & Regards.

hi.
Use SM 36 for creating the job...and SM 37 for displayin the job...here
u can see some details such as job name,job modifier name,modified date from which date to which date....but u must know the job name den only u can find the modifier name there...
it is possible to know such logs.....
select the job..in that screen job log button is there..select the button,can get the job log ..ie start time and end time and some other informations..
hope this helps u..
assign sum points if applicable...
regards,
ramanan

How to create a JOb

Hi Experts,
Previously i waw using bdc and was creating session.
Now in place of BDC i am using BAPI .
Now i cannot create a session so i am creating a job.
Problem is that when i use bapi the record is created at same time.
So before execting Job using transaction SM37
the records gets created.
Can any body please explain me how to solve this issue.
Thanks & regards,
Chetan

Hi chetan,
To create a new batch job you can go to transaction Sm36,wherein you can define the job name,job class and target server..then you can go to start condition and select whether it is a periodic job,or immediate job and accordingly you can schedule the job..Also the very important thing is in the Step funtion you should have valid ABAP program or any external program which should be used at the background...
If you know the program then you can go to SE38 and create a variant for that program which can be later used in the newly created job.You can also copy an existing job and modify it according to the requirement by checking the job details in SM37.
Just to summarise the Key transactions are : SM36 and SE38.
JOB_OPEN: Create a Background Processing Job
Use JOB_OPEN to create a background job. The function module returns the unique ID number which, together with the job name, is required for identifying the job.
Once you have "opened" a job, you can add job steps to it with JOB_SUBMIT and submit the job for processing with JOB_CLOSE.
For more information, please see the online documentation in the function module facility (transaction SE37)
Sample Program: Creating a Job with JOB_OPEN
Create your job with JOB_OPEN. The module returns a unique job
number. Together with the jobname, this number identifies the
job. Other parameters are available, but are not required.
JOBNAME = 'Freely selectable name for the job(s) you create'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = JOBNAME
IMPORTING
JOBCOUNT = JOBNUMBER
EXCEPTIONS
CANT_CREATE_JOB = 01
INVALID_JOB_DATA = 02
JOBNAME_MISSING = 03
OTHERS = 99.
IF SY-SUBRC > 0.
<Error processing>
ENDIF.
thanks
katrhik

HOW TO SEE THE JOB NUMBER IN DISPLAY MODE?

Hi all,
I am new to apo and how to see the job number in display mode?
i can see a couple of trns for create, delete and change and not to display it?
Can anyone tell me abt it?
Thanks
pooja

Hi Pooja,
I assume your query is on identifying job ID in display mode
To find out that, goto sm37, execute it and double click on
the job, and then click on job details, you will get the
job id (job number) in display mode
Regards
R. Senthil Mareeswaran.

Can't find my job in SM37

Hi All,
Iam facing an unique problem:
I've started reconstructing a request in an infocube.
The 1st data packet was running and I was also able to see the job in active status in SM37.
And the remaining data packets were in red status and were no messages in them, while for 1st data packet I could see the message 'start of processing update rules'
When Iam not in the shift, our team saw that 1st packet turned green and other packets are red, they thought reconstruction failed and for 2nd packet they selected manual update without my knowledge.
Now, when I checked my job in SM37, I could find no jobs in my id.
But I could see that 1st packet is green and the 2nd packet also turned green as Iam typing this message. Now without my involvement I can see for 3rd data packet the processing has started from which I assumed that my job is still running ( or did I assumed wrong).
Now, where can I check if my job is running. As I can see in the monitor that 3rd data packet has started, I want to confirm that it is surely running.
Ah, Iam working on Production.
Please tell me how can I go about it.
Thanks & regards
AP

Hi,
goto SM37 without any date and active job (all users).
Your job could be running under ALE/ALEREMOTE or your communication user, or any other user.
The packets are turning red after the timeout setting of your IPack and depending on the setting "treatment of warning"; this doesn't mean that your job stopped...
In your particular situation if the job is running should you see it as BI_NEW* (as far as I remember...).
If you have identified your job, double click it and press F7 to obtain detailed info and see in which server / process it is running and it ia doing....
hope this helps...
Olivier.
Message was edited by:
Olivier Cora

How to stop print job in SAP?

Can some help in explaining how to stop print job in SAP .???
i

HI Swati,
Thanks for the additional info. as per previously mentioned use SM37 - however be sure to check the box ''Sched' when performing the search for the job in question (and untick the others so the resulting list will be clearer to read etc.)
You can then choose to delete the job and reschedule it to different periods via SM36
Best of luck,
Rgds, Derrick

How to setup background job for QI06

Dear all,
We have massive QIR to create and the volumn is extremely big to run in foreground in QI06.
Can you show me the steps to setup QI06 to run in background, and how to view if the background job is complete, etc.
Appreciate millions.
Tuffy

Hello,
Just enter all the details in QI06. like:
Complete list of Materials in Material field +plant+ vendor. ( if you have one plant then its ok and if you have same material with different plant and vendor combination then better to set variants plant wise)
ENter rlease until, model inspection type ( if you have any )
Now. goto Program and there is an option for EXECUTE in BCKGRND. clcik on it .
Provide background job name and time for its job start and period ( If you want periodic job like monthly, weekly or daily etc.)
then execute it.
and monitor the job via SM37.
Regards

How to identify a job in sm37

Similar Messages

Maybe you are looking for