How to identify and look at the sid generated for ods?

hi all,
Can anyone let me know how to identify the sid id generated for ods and look at the sid id generated for any ods.
thanxs
haritha

Hi,
NO SIDs are created for ODS,
When Creating an ODS if we select BEx Reporting Check Box then the SIDs for the Master Data will be created.
Actually SIDs are created when Activate Master data and Dimension Ids are created when we Activate Transactiona Data.
Hope This Helps,
Regards,
rik

Similar Messages

Mac Died and only have the upgrade discs for FCE

I had FCE version 2 loaded on a Mac Pro. I upgraded to 4 and all was happy. Now my Mac Pro died and I am "forced" to use my Mac Mini. The problem is, I cannot find the FCE 2 disks so I can upgrade to 4. I had registered my version 2 so is there a way to get so I can get this running? If I need to contact Apple, who and how??
Scott

Do you have the serial number? You don't need to install the previous version if you have the original serial. Go to the Apple web site and look in the support pages for contact information.

I subscribed for itunes imatch - it works perfectly on my i-pad and iPhone - however on my macbook - my iTunes can no longer find my songs - i don't know how to make it look to the cloud to play my music

i subscribed for itunes imatch - it works perfectly on my i-pad and iPhone - however on my macbook - my iTunes can no longer find my songs - i don't know how to make it look to the cloud to play my music - i think it keeps trying to find on the external harddrive where i used to keep my music

Of course iTunes is looking for the music on the external HDD. Enabling iTunes Match does not magically change the location of the iTunes library to the cloud.
To play the music either plug the external HDD back into your computer or create a new, empty library to use for streaming the iTM content. The latter can be accomplished by holding down the Option key when launching iTunes, choosing "create library" then enabling iTunes Match on the new library. DO NOT have iTunes scan your HDD for music.

My 12" powerbook logics card crashed. I have a 17". How do i retrieve my internet bookmarks from the 12" by putting it into Target mode on the 12" and looking into the hard drive on the 12"?

My 12" powerbook logics card crashed. I have a 17". How do I retrieve my internet bookmarks from the 12" by putting it into Target mode on the 12" and looking into the hard drive on the 12"? Where on the 12" hard drive do I go to search for them?

If the 12's logic board is trashed, I don't think you can get into FireWire Target Disk Mode. The computer has to start to get to FWTDM. Will it starte and run at all?
If it won;t start, you will have to go inside and extract the hard drive. Then get this gadget:
Newer Technology Universal Drive Adapter USB 3.0/2.0 - connects any 2.5", 3.5" or 5.25" drive
It allows you to connect a bare drive to another computer that has USB. It will act just like an external disk drive. Assuming the 12's drive is not damaged due to the LB failure, you can retrieve files quickly.

When I look up the creation date for files on my Macbook I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar.

I go to start the "Apple Mobile Device" and it says the side-by-side configuration is incorrect. (Error 14001) How do I fix this?

I go to start the "Apple Mobile Device" and it says the side-by-side configuration is incorrect. (Error 14001) How do I fix this?

Delete them and then download them from the desired Apple ID. This may require repurchasing paid applications.
(95675)

How to identify and remove duplicate plugin effects from AE cs5 please?

hello,
i installed some trial plug in effects for AE and PPRO cs5
cycore, boris, trapcode
the PPRo went great
however, with the AE i get notices that multiple instances of 'such and such' effect
is installed more than one time...there's about 15 that give me a warning each time i start AE...
i tried my best to locate any duplicates but no luck
How do you identify and remove duplicate plug in effects for AE CS5?
thanks,
j

hello,
it is nice when you can answer your own question...
looked in 'common...media core...' and found the new blue trial plugins
also had the duplicates of the new blue plugins in the AE plugins 'effects' folder
deleted the plugins from the 'media core' folder
no more warning signs...
cool deal
back to work,
j

How to Zoom and Pan in the program window.

Hi,
I have been using scale to adjust larger than 4K image sequences so they fit 1080 and 4K output. I want to be able to zoom in and pan/tilt the program window so I can see the edges of the program window close up, so I can see to make a fine adjustment of scale. I want to be able to adjust scale precisely so I don't lose a single pixel, or include any black around the edges of the images. Of course I can't see the edges close up enough while looking at the entire image, to really see if I have scaled too much or too little. I know how to zoom in the program window, but how do I pan over to the side and bottom edges ? Without being able to pan I instantly lose the edges of the frame when I zoom in the program window.

Perhaps this will help it make sense to you.
I am taking tme lapse sequences shot on a DSLR and putting them onto Blu Ray disks for viewing. I also outputted a 4K file to try to play at Best Buy on a 4K television. The images are 4928 X 3280 pixels, which is larger than 4K, and much larger than 1080. One of the advantages of using these large images directly and not reducing them in Photoshop first is that I can have a time lapse zoom, which is very difficult to achieve otherwise. I can also pan and tilt. Another advantage is not having to reduce thousands of images three times, once for 1080, once for 4K, and once for stills..
I usually work with 1080 video, and animated 1080 still sequences from Maya, or standard definition video. This is the my first opportunity to work with higher resolutions.
Generally, for my first evaluation of these DSLR stills, i wanted to show some of them fully without cutting any off. This means there is a black border onthe sides because the DSLR stills are 2:3 instead of 9:16. For this I have used a scale of 32.6% for 1080, and 66% for 4K. For some sequences i wanted to just completely fill the frame. For this I used 38.9% for 1080, and 77.9% for 4K.
My assumption is that Premier should do scaling as well as Photoshop does, and so I have let Premier do the work, saving me a lot of extra work. First i take all the original images and process them from raw to tiff, for the day exposures. Then i process them again for the night exposures. Then i bring them into either my 1080 project, or my 4K project. I put the night pictures above the day pictures on a separate video track. I use opacity to dissolve from the day to night processed images as night falls inthe scene.
Two sequences I shot are of the night sky during the recent meteor shower. After watchign the video I see i caught three instances of persistent meteor trails distorting in the sky. I was able to zoom in quite a bit, and track the position, because the sequence is of greater resolution than the native 1080 format. It gives me a second change at composition, or the ability to zoom in on something interesting that happens in the scene.
It seems to me that the only reason i would want to first process the images down to 1080 in Photoshp, would be if the quality of the scaling was higher in Photoshop.
When i adjust the scale, I am adjusting the scale of an image that is 4928 X 3280, in the program monitor which is probably only well less than 1000 pixels on my screen. It would be nice if I could not only zoom, but pan in the program window, so I could more accurately adjust scale by looking at the edges. So if there is no other way to do this visually, I am suggesting adding the ability to pan and tilt in the program monitor to accomplish this. Sure I could figure out the scale mathematically. I could still end up adding a row of black pixels, or cutting off a row of image pixels, due to some error such as rounding errors, or starting with 1 instead of zero, or vice versa.

IPhoto - My iPhoto is not responding. When I click on iPhoto I get a never ending spinning beachball. I almost think it is looking in the wrong place for the pictures. How do I redirect it back to the Mac hard drive?

My iPhoto is not responding. Whenever I click on the iPhoto icon I get a twirling beachball. It is as if the machine is looking in the wrong place for the photos. How can I see where the machine is looking to find out if this is really the problem. How can I see the path?

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it doesn't then the problem lies with your current library.
If that's the case Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

How can I erase burnfolders in the side-bar?

How can I erase burnfolders in the side-bar?
W.W.

You can also try this.
Go to your home folder>Library>Preferences - delete/trash the files labeled "com.apple.finder.plist" and "com.apple.sidebarlists.plist" and then restart your computer. Empty the trash once you reach the desktop. The untitled dvd folder & burn icon should now be gone from the Finder sidebar.
In addition to removing preference files, if you don't want to use the sidebar for managing CDs and DVDs you can go to the Finder preferences and uncheck the option to show CDs, DVDs, and iPods in the sidebar to prevent them from appearing there in the first place.

I bought the Tiger woods 12 game for my ipad and also paid the 19.99 for the $2M. It has crashed my ipad a few times and when it restarted last time, it had no history of my progress or the $2M. How do I get my history back

I bought the Tiger woods 12 game for my ipad and also paid the 19.99 for the $2M. It has crashed my ipad a few times and when it restarted last time, it had no history of my progress or the $2M. How do I get my history back or my money back for the game and the in-game expenses?

The only one that can issue a PUK code is a carrier, which you've already made clear you don't have.
If itunes does not recognise your ipad that may be another issue. What version OS is on your computer and what steps did you follow to uninstall itunes and then reiinstall itunes on your computer?
And, do you at least see the sidebar on the left hand side of itunes?
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
Do you have another computer you can try?

How to identify what are all the events are created in background jobs?

Hi all,
how to identify what are all the events are created for background jobs. And what events gets triggered for a particular job.
thanxs
haritha

Hi Haritha,
JOB is a program which starts to a determined point of time and executes some standard programs in the system. JOBs can be planed to a determined point of time on the regular basis (every night, for example) or to some discret time moments. So, the JOB can be planed and then will be started automatically without the manual start.
Realtime programs are understood in the most cases as actual program execution which is started by somebody to the actual moment of time.
Typically per JOBs some special processes will be started that should be executed automatically and regularly: for example, IDOC application, some correction reports, statistic updates etc.
Standard jobs are those background jobs that should be run regularly in a production SAP System These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
Use
As of Release 4.6C, the Job Definition transaction ( sm36 ) provides a list of important standard jobs, which you can schedule, monitor, and edit.
Standard jobs are those background jobs that should be run regularly in a production SAP System. These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw70/helpdata/en/24/b884388b81ea55e10000009b38f842/frameset.htm
About Events:
Events have meaning only in the background processing system. You can use events only to start background jobs.
Triggering an event notifies the background processing system that a named condition has been reached. The background processing system reacts by starting any jobs that were waiting for the event.
Types of Events:
There are two types of events:
1.)System events are defined by SAP. These events are triggered automatically when such system changes as the activation of a new operation mode take place.
2.)User events are events that you define yourself. You must trigger these events yourself from ABAP or from external programs. You could, for example, signal the arrival of external data to be read into the SAP system by using an external program to trigger a background processing event.The event scheduler processes an event if the event is defined in the system.
For example, if a system (System 1) receives an event from another system (System 2), the event scheduler of System 1 processes the event only if it is defined in System 1. That event does not need to be defined in System 2 (the sending system).
You define an event by assigning a name (EVENTID) to it. When defining an event, you do not define the event arguments.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw04s/helpdata/en/fa/096e2a543b11d1898e0000e8322d00/frameset.htm
When you schedule the process chain or infopackages the jobs associated with it run in the background mode. In case you want to create a job for a specific activity you can do so in SM36. You would be creating jobs that would get executed in any one of the options:
1. Immediate
2. Date & Time
3. After event.
4. After job.
5. At Operation mode.
In case you want to view the job logs go to sm37.
Also Pls check DB02 for database performance and ST03 for workload .
Analyse u will have an idea ,
*pls assign points,if info is useful**
Regards
CSM reddy
null

How do I identify and install latest RAW plug in for elements 10 for Sony A 7 mark 2

How do I identify and install latest RAW plug in for elements 10 for Sony A 7 mark 2

Elements 10 is too old for this new camera. It can't be updated to the ACR 8.5 version, you would need PSE12 or 13.
Camera Raw plug-in | Supported cameras
You can download the free Adobe Dngconverter which can batch convert whole folders of your Sony raw files to the DNG raw format that your PSE10 can handle.
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?

I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

How to Identify larger Infocubes where the dimension entry count is large

Hi SDN,
I need some help on Indexes dropping and Recreation.
Please can any body help me on How to Identify larger Infocubes where the dimension entry count is as large as the Fact Table count.
Need to suggest on a solution to implement the Indexes creation for optimizing the load performance of Larger Infocubes... Its urgenTT!!!!!!!
Please help!!
Thanks,
MH

Hi,
I have ran the Report in SE38, also I have downloaded it to local Excel file.
It is showing density, rows etc.Please can you elaborate on how to easily Identify
the Larger cubes. As I have seen that the rows of both E and F fact table are displayed. How can I use this reports information in order to suggest for the Indexes?
Help in this regard is much appreciated!
MH

How to identify and look at the sid generated for ods?

Similar Messages

Maybe you are looking for