How to identify EBS Source tables for SC and OM modules?

Hi,
I need to identify EBS source tables for Supply Chain and Order Management module.
What prefix I should check in EBS tables?
Is there any document on this?
Regards
Sudipta

Check etrm.oracle.com
For order Management you should check with OE
Purchasing PO and inventory INV and I guess for ASCP MSC
Mahendra

Similar Messages

How to find R/3 table for FI and PS Datasources

Hi,
Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
Thanks
Shanthi

Hi,
To find DS assigned to a table.
How to find the Datasources for the given table names ?
How to find the Datasources for the given table names ?
To find Tables assigned to a DS.
USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Note: Set the break point in the Extractor Function module.
View the ST05 Extended Trace list. The Object name shows the Tables accessed.
Thanks,
JituK

Source tables for forms and tabular forms must have a primary key.

Why does HTML DB 2.0 return the message
"Source tables for forms and tabular forms must have a primary key."
when trying to generate a "Report and Form" page based on a view defined like "create view <applicationschema>.a as select * from <sourceschema>.b" ?
It should be possible for HTML DB to "see" that the table "<sourceschema>.b" already has a primary key.
bw - Christian

Christian,
In the create application wizard, when creating form or tabular form pages, you can only use tables with primary keys, and not views, because that wizard is automatically deriving the primary key from the table definition. If you want to build forms on views or tables without a primary key, you need to use one of the create form wizards while working on an existing application. Those wizards allow you to pick your own column as a primary key column.
Regards,
Marc

COPA: how to identify which cost element for sender and receiver in IMG

Hi Guru,
I know my cost element for sender and receiver from the settlement document, but where in IMG, i can identify how it settup to use which cost element for my sender - order , which cost element should be used for my reciever profit segment.
Thanks,
Kick

Hi,
Go to KEI1
Select your transfer structure
double click on assignment lines
check the source and value fields to get the mapping.
Regards,
Sridevi
Pls. assign points, if useful

SOURCE TABLE FOR GRN IN MM

Hi,
Please let me know how to find the source table for GRN in MM .
Thanks in Advance,
Manu

Hi,
You can also use ST05..
Switch on the SQL Trace..
Execute the transaction..
Switch off the SQL Trace..
You can see the tables that were used in the transaction.
Reward points if found helpful..
Cheers,
Chandra Sekhar.

How to identify the source column and source table for a measure

Does anyone have a query that I can use to positively identify the source column and source table for a cube measure in an SSAS cube? Visual Studio shows ID, Name, and Source, but it is nearly worthless in a large cube and database.
Also - the same for a dimension would be great.
If no query exists for this, can someone please explain how to find the source column/table for a measure and for a dimension?
Thanks.

DMVs don’t expose the DataSourceView content. AMO is much better suited for object model operations like
this than the DMVs. PowerShell is also sometimes an option, but in this case C# code would be much easier because analyzing the contents of the DataSourceView is much easier using the .Net DataSet class.
Hope this helps.
Reeves
Denver, CO

EBS Columns/Tables for DWH Columns/tables.

Hi Friends,
We are working on OBIA HR- Analytics. I want to trace out EBS Columns/Tables to some of our DWH columns. Pl find the below examples in my little investigation.
Headcount (DWH Column) : DWH Table: W_WRKFC_BAL_A
EMPLOYEE_NUMBER ( EBS column) : EBS Source Table: PER_ALL_PEOPLE_F
Mapping: SDE_ORA_EmployeeDimension
Mapplet: mplt_BC_ORA_EmployeeDimension
Now, i m trying to trace out the same stuff for the below DWH table/columns:
W_WRKFC_EVT_A --> W_WRKFC_EVT_F
TERMINATION_CNT --> TERM_EVENT_IND
Pl. let me what are the EBS tables/columns for W_WRKFC_EVT_F (table) / TERM_EVENT_IND (column)
But, i m thinking that, TERMINATION_CNT / TERM_EVENT_IND is not a direct column from EBS. SOme logic is going on this column using diff. columns. But, not sure.. :)
Pl guide me how to resolve this issue..
Thanks in Advance.
Raghu Nagadasari

Hi,
I got some EBS Queries from below links and i think, i m near to my requirement :) I will let u guys know once i get the complete query..
https://www.google.co.in/search?q=ebs+query+to+find+out+Employee+Termination+Count&newwindow=1&ei=yZOsUdf6EYW3rAfu1YGwBg&start=10&sa=N&biw=1024&bih=595
http://appsquery.blogspot.in/2010/08/query-to-get-active-employees-and.html
http://appsquery.blogspot.in/2010/08/query-find-employee-count.html
Raghu Nagadasari

Multiple source tables for Measures dimension.

Hi,
We have two different SQL source tables for the Measure dimension in our project. Both the tables have the same structure but the Measures they contain are different. Based on certain condition Essbase will have to pick up Measures from one of the two tables. So basically the source table changes based on the condition. Is it possible to design rule files to achieve this? Please help me with this.
Thanks,
Krishna

as I am sure many will say essbase and load rules are not really an ETL tools.^^^ :)
Glenn is going to counter with a "I know how to do this in three steps using create column as text, join, and a oft-overlooked but awesome command that everyone but Tom Tortolani (I think I have the spelling on that right -- he was the Arbor employee that wrote Load Rules) forgot.
I 100% agree with John -- why not do it in SQL?
Regards,
Cameron Lackpour
Edited by: CL on Jan 23, 2013 6:33 AM
Misspelt Tom's name

How to identify the psa table names in bi 7?

Hi all,
How to identify the psa table names in bi 7? i need to know the psa table name in bi 7?
as well as i need to check whether any historical data loads is there for psa for a particular period?
How to filter for a particular data in the psa in bi 7?
Thanks
Pooja

Hi Pooja,
A)How to identify the psa table names in bi 7? i need to know the psa table name in bi 7?
Double click on the PSA and CTRLSHIFTF5 --->in PSA properties -->PSA table ..u can find the name here ....
B)as well as i need to check whether any historical data loads is there for psa for a particular period?
usually as SAP best practise we will not keep data in PSA for not more than 30 days or at the amx 60 days..you may not find historical data here..however to find the oldest data -->Right Click >Manage>Give some old date ,say 01.01.2005 in the Request newer than ...and Refresh.....
Other way is to find out in the Data provider i.e in the Cube or DSO ...
How to filter for a particular data in the psa in bi 7?
a)Do not map it
b)in the DTP...Filter it ....i.e from PSA -->CUBE/DSO....
c)Or write a routine also in start routine ...
Rgds
SVU123

How to fill up set up tables for 2lis_03_UM and BF?

Hi,
I am working on Material movements, and i have a How to do document. According to that, its showing me to fill up set up table for 2Lis_03_bf by using TCode OLI1BW, and in the very next step its again telling me to fill up set up table for UM, by using the same TCODE ( OLI1BW ) .
Now, if i do that, how would the system know that it has to fill up set up table for BF and then UM ? , no where in the screen its asking to fill up the Data source.
OR i just have to fill up set up table ONCE, and it will fill up for both the DS ?
please help.
thanks

Hi,
I think you can follow the same procedure. After completion of setup table filling you can check the result in RSA3.
In case of UM, you will have the provision to load data based on specific Company codes, but if you don't have any such requirement then you can simply fill setup tables.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Aug 30, 2011 10:29 AM

HT3354 how can i use one table for reference to another

how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
Here is an example of something you can do with two tables:
The table on the right is title "Data" and stores a list of names with age and favorite color.
The table on the left uses the value in the first column to lookup up information in the table Data
in the table on the left:
B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
I know this look complicated. so I'll break it up into smalled pieces:
first the "&" is called the concatenate operator and joins two strings. like this:
a string is a set of characters between double quotes.
so "string 1" & "string 2" becomes "string 1string2" or "Sam " & "Jones" becomes "Sam Jones"
you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
so if cell A1 contains "Hi " and the cell A2 contains "There" then A1 & A2 will result in "Hi There"
so you could add the formula
A3=A1 & A2
this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
OK. So the formula I provided concatenates several items together:
it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data". If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
You will find the Numbers users guide and function reference helpful. You can download then from Apple here:
http://support.apple.com/manuals/#productivitysoftware

URGENT: How to find out the Tables for Routines in BW.

Hi BW Gurus,
How to find out the Tables for Routines in BW.
I have this routine id 45XFAEI7LKIFIRDUKQG127YWW and it is in inactive state and i want to activate it.
thanks in advance,
points will be rewarded.
Regards,
Maruthi.

Hi Maruthi,
Check table RSUPDROUT using the routine id as input for the field CODEID. You will get the technical name of the update rule.
Cheers,
Praveen.

How can identify the default currency for a customer?

How can identify the default currency for a customer?
I know that this is being determined when you create a sales order for a particular customer, for example, so I could break this process open and find out what it uses. But I thought it worth asking in this forum first.
Blue

Hi Gary,
As per my understanding of your question I am replying , If you are looking some thing else then I request you to please elaborate your query.
If you see the BP sales area data in transaction BP, In billing tab you maintain the currency for a customer which is default currency when you create a sales order.
Reward points if it helps!!
Best regards,
Vikash

How to view the source code for Native Method

hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nik

Buy/acquire a C/C++/assembly code disassembler and run the shared library through it.

How to find the Source Table in one corresponding schema?

Hi All,
How to find the Source Table in one corresponding schema?
regards,
DB

DB wrote:
Hi All,
How to find the Source Table in one corresponding schema?
regards,
DBHUH?
I do not understand your question
How do I ask a question on the forums?
SQL and PL/SQL FAQ

How to identify EBS Source tables for SC and OM modules?

Similar Messages

Maybe you are looking for