How to identify extension sets?

How to check the version of a system ?ie how do you find out if its
SAP470 ext 200 or SAP470 ext 110.
doest it show up in system status ?.
Thanks,
dev

Hi,
Yes it does !
System --> Status
Then click on the magnifying glass button near "Component version"
Here you will get a second popup screen with the components releases.
Component names beginning with "EA-" are the extension set components.
Regards,
Olivier

Similar Messages

How to find out the extension set version in R/3 Enteprise.

Hi all
I have an SAP system with kernel 640 and Basis and abap and other SPs at version 620.
I am trying to install Auto id infrastructure. I have the following questions.
1. With kernel level 640 should i take my system as R/3 4.7 or ECC5.0?
2. How do i find the extension set version (2.00 or 1.10) of my R/3 4.7 system?
Thanks in advance:)
Regards,
Hari

Hi hari,
Ofcourse your system is a R/3 4.7 System and as it is running on 620 stack hence the extension set is 1.10.
for extension set 2.00 the stack level will be 630.
The same can be confirmed at
http://help.sap.com/content/documentation/r3/docu_sbs_r3_470.htm
Please note the following:-
a) SAP R/3 Enterprise Release 4.70 SR1
SAP Technology Components Release 6.20
<b>Extension Set 1.10</b>
b) SAP R/3 and R/3 Enterprise 4.70 SR1
SAP Web Application Server 6.30
<b>Extension Set 2.0</b>
Please update the thread status and reward the useful posts!
Regards,
Prem

What's the difference between R/3 Enterprise extension set 1.10 and 2.00 ?

Hi there,
Anyone know how to find the difference between 47x110 and 47x200. I want to install the new IDES R3 which is 47x200 (I found some program/source that I need in this version). But our PRD system is 47x110.
thanks in advance,
Doris

Hi Doris
SAP R/3 Enterprise Core has been assigned the release number
4.70. This signifies its similarity to SAP R/3 4.6C and indicates
that the core can be independently upgraded and maintained.
SAP R/3 Enterprise Extensions are selectively deployable and
have their own release cycles. The name of each SAP R/3 Enterprise Extension reflects its relevant application area.
e.g.
SAP R/3 Enterprise Extension Set 1.10 includes HR,SCM and Fin modules
SAP R/3 Enterprise Extension Set 2.00 includes all above and additionaly PLM module.
Award points if Helpful
Regards
Umesh

Financial extension sets and flb1 post processing items are not there

"Forum moderators, if you reject this post please tell me exactly what is incorrect about it in your rejection message".
Hello experts,
We are currently in 4.7 and have activated financial extension set EA-FIN. I tested electronic lockbox programs but when I try to find the unprocessed items they are not in FLB1 or FEBA. I have searched forums but have not been able to identify the problem. I have also research to see if additional config is needed with the activation of the extension sets but have been unsuccessful there also. Electronic lockbox posting and the ability to apply unprocessed payments in FLB1 was working correctly before the activation.
Your help is greatly appreciated.
Carrol

I was able to deactive the NEW_FEBA using trans SM31 table V_T100C using message 002 transaction FEBAN not required. FLB1 started.
This solved my problem
Carrol

Fiancial extension sets and flb1 post processing items are not there

Hello experts,
We are currently in 4.7 and have activated financial extension set EA-FIN. I tested electronic lockbox programs but when I try to find the unprocessed items they are not in FLB1 or FEBA. I have searched forums but have not been able to identify the problem. I have also research to see if additional config is needed with the activation of the extension sets but have been unsuccessful there also. Electronic lockbox posting and the ability to apply unprocessed payments in FLB1 was working correctly before the activation.
Your help is greatly appreciated.
Carrol

I was able to deactive the NEW_FEBA using trans SM31 table V_T100C using message 002 transaction FEBAN not required. FLB1 started.
This solved my problem
Carrol

How to identify migrated rows on a table

Hi, folks,
I'm wondering how to identify migrated rows on a table.
I understand that ANALYZE generates data into CHAINED_ROWS. The Oracle document implies that this table has both CHAINED ROWS and MIGRATED ROWS. FYI:
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14231/general.htm#sthref1881
But how can I tell migrated rows from chained rows.
Thanks!
Alex

im also not looking to ExporttoExcel feature on ADF just copy all the records displayed on a table
im also not looking to ExporttoExcel feature on ADF just copy all the records displayed on a table ,
Hi you can set the property( exportedRows) of exportListener
you can limit the number of rows to download
chekout documentaion
ADF RichClient API - af:exportCollectionActionListener

How to get extension version number to update in exchange panel.

I was able to upload my Illustrator extension, set it to private and share it. Brialliant functionality. Now I have released a point update, and although it shows the correct version in the extension details on the Adobe Exchange website, the version number will not update in the panel itself, although my description modifications update just fine. The extension as shown in the "Not Published" list of the sight has the old version number. When I click on it to get to the main extension page, it shows the correct version number in title and in also correct in the details on the right. It does say "(Preview)" after the name. I don't intend to ever sell it, but want to keep sharing it privately. How do I get it to recognize version updates?
Thanks

Hi there,
It sounds to me like the reason your new patch (with the updated product version) is not showing in the panel is that it has not been "published". If it's showing up in the "Not Published" screen, this means that it's only available for you personally to make changes to in the producer portal - once you're finished making your changes (uploading a new ZXP etc.) you need to click Submit (with Auto-Publish) to make the new version go live to the people it's shared with (and show up in the panel). As long as the product is set to Private, clicking Submit (with Auto-Publish) will not make the product available publicly - it will continue to be private, visible only to the groups you specify.
Fraser

How to identify the name of my smtp-mail host dynamically?

Hi,
I want to send an email from my system which has an internet connection.
I don't know how to identify and mention the name of my smtp server ie; the smtp-host name that should be mentioned in my propetries object 'props' as props("mail.smtp.host","smtphostname");
I want this program to work on other systems also,ie; It should dynamically find out what is the smtp-email host for the computer on which the program is running and set the smtp-host name in the 'properties' object dynamically.
I will be thankful if anybody sends me code to solve this problem.
Thank u in advance,
Ravi.

Write a mail scan to look for typical settings
such as domain, mail.domain, smtp.domain, smtp.mail.domain
where domain is after @ in an email address
Have a SocketSearch class that uses non blocking via java.nio.channels.*
so it can be interruptable and scan for these typical mail settings on default port 25 - The code using these interruptable socket can each be threaded to find the host/port and should find it in seconds
Once found, store the settings in a configuration so you don't have to scan again unless it doesn't work anymore...
If can't find the socket host/port via typical settings, next use a Java class that does a nslookup based on MX records - For example if you type "nslookup -type=mx javasoft.com" and you get mail exchanger = mail.java.sun.com and if you "telnet mail.java.sun.com 25" - you can see the port is open for sending emails.
No expert in MX records for a domain to find the exact one and someone else can share some light on this...

How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.

How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.
for this responsibility i need to have teh sets enabled. how to do teh same.
similar to OM ADMIN as shown below:
Kindly advice on teh steps. i believe its some menu /function inclusion can you pl share teh pointer.
regards,
bala

AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

How to identify/remove kexts labeled as kernel_task that consume too much resources

Hi all,
I am using Mac Os X 10.6, on a 2010 macbook pro 17" with latest updates as of 09 05 2011
I am using memory intensive applications for scientific purposes, and I am quite unhappy with one kernel extension that consumes more than 600 mb of real memory.
It is most probably a driver,
but I do not know how to identify which driver it is, and how to remove it.
does Mac Os provide anything like modprobe modtools etc? Or even anything that resembles windows device driver managment in XP is welcome.
Best,
OBM

Sorry, the activity monitor and top are bit too vague for the problem at hand.
This kernel_task, is a container for all the kernel extensions, right?
It is strange, the amount of memory reported by kextstat does not match with this value,
only if all 147 of them was using 4 mb of memory (as I've told, those are the only 2 6 digit numbers, most of them
are 4 digit numbers, so it is impossible) I would have a figure close to it.
So do you mean there is something I can not see that consumes this memory?
These are the internal kexts which are "internal" and size information is not available, can it be a virus or something?
    1   86 0          0          0          com.apple.kpi.bsd (10.7.0)
    2    4 0          0          0          com.apple.kpi.dsep (10.7.0)
    3 112 0          0          0          com.apple.kpi.iokit (10.7.0)
    4 118 0          0          0          com.apple.kpi.libkern (10.7.0)
    5 101 0          0          0          com.apple.kpi.mach (10.7.0)
    6   33 0          0          0          com.apple.kpi.private (10.7.0)
    7   55 0          0          0          com.apple.kpi.unsupported (10.7.0)
    8    0 0          0          0          com.apple.kernel.6.0 (7.9.9)
    9    0 0          0          0          com.apple.kernel.bsd (7.9.9)
   10    0 0          0          0          com.apple.kernel.iokit (7.9.9)
   11    0 0          0          0          com.apple.kernel.libkern (7.9.9)
   12    0 0          0          0          com.apple.kernel.mach (7.9.9)
For the sake of completeness, this is the output from top:
0-     kernel_task 2.7 05:00:25 77/4 0    2    1667+ 38M+   0B     586M+ 97M+   3113M+ 0     0     running 0    1788588    344    2004230579+ 1935476674+ 0          0           1062169040+

Activation Extension Set FI-CAX for Error

Hello to all.
In my Development System ECC, the functional consult activate the extension set FI-CAX for "error".
How can disabled the extension set for FI-CAX ????
I run a copy client with profile SAP_CUST since production system to development in the client of customizing, for disabled the extension set ????
Thanks a lot.
Desiree

I dont think you can deactivate the enterprise extensions. Check txn. SFW5 and check the logs and see what erros you got ?
Thanks
Prince Jose

How to Identify Delta Field in DS

Hi Gurus,
1. My understanding is if a field in datasource(DS) is
set as Delta, whenever that field value changes in DS
then the delta process will initialize. (please correct
me if i am wrong) Do we need to replicate everytime
the field value is changed so that the value is updated
in the data target, if so is there a process to
automate it...
2. Can someone tell me how to identify Delta Field in a
DS for example in 0FI_AP_4. i tried to search for it in
help.sap.com but all i could find is that 0FI_AP_4 is
delta capable but couldn't find which field is set to
delta...
Thanks,
SM

Sri Mal,
   1. Yes, there should be one field enabled enabled for delta.
   2. no need to replicate every time when ever data changes. we need to replicate when DS changed. i mean not business data, if meta data changes we need to replicate the DS. let us assume you made one field for selection and one field as hide. then you need to replicate this.
3. OFI_AP_4 is standard DS. you can't enable delta for this one if SAP didn't provide that. we need to active data for this. in the SAP Documentation you can see whether it is delta capable or not.
comming to 0FI_AP_4, IT IS DELTA CAPLABLE.
Hope this helps.
All the best.
Regards,
Nagesh Ganisetti.

How to identify the environment (database) Apex is running on?

Hi
We are going to have 3 environments here: Development, Test and Production (separate databases/servers for each one). As usual, the development process will move applications from Dev -> Test -> Prod.
On my Apex 3 applications, I would like to visually identify, in some way, to which environment I am currently connected. For instance, displaying the name of the environment on the page header.
My problem is how to identify what environment Apex is running on. Is there any Apex instance-level property where I can set a string and display it in my applications? Or something like that?
What is the best way to achieve this? Any suggestions welcome.
Thanks,
Luis

Luis,
another option is to check the http environment to get this information.
This is what we use in one of our applications:
   FUNCTION get_environment
      RETURN VARCHAR2
   IS
   BEGIN
      IF LOWER (OWA_UTIL.get_cgi_env ('SERVER_NAME')) IN
                      ('development.opal-consulting.de')
      THEN
         RETURN c_development;
      ELSIF LOWER (OWA_UTIL.get_cgi_env ('SERVER_NAME')) =
                                                   'test.opal-consulting.de'
      THEN
         RETURN c_test;
      ELSE
         RETURN c_production;
      END IF;
   END;Unfortunately, this doesn't work with Oracle XE, thus you might be better off checking the value of: OWA_UTIL.get_cgi_env ('HTTP_HOST')
Anyway, I would also rather suggest using the table based approach, I use it in most applications now. This way you are more flexible. You can simulate all different settings in the same schema. Also, you can install development and test in the same database.
Regards,
~Dietmar.

How to identify the missing reecords once load was performed

hi experts
if load was performed and we found some missing records are there how to identify them and how to populate them again. if the records are only few we can manually find them and selecting and info package level in data selection we can send them but if they are millions of records how to identify them and how to solve this kind of issue.
is there any solution for this apart from data reconsillation
thanks in advance

Hi,
Generally who is accessing the reports(End users) , those only can findout that if any data is missing in the data load and showing any wrong data.
They will know and compare the data in R/3 inform to BW team , what they got wrong data insted of Original data.
According to that we need to Analyse the data flow BW >>> R/3 -( Top to bottom we need to check all the data targets by giving the missing values)
To see the contents we use the T.code is : LISTCUBE ( Here you can see the content and request IDs and source) , according to the we need to analys and find , whether problem is occured
LIST CUBE : To see the contents of data targets in BW side
In the below cases data will show wrong in the reports
1. If the data was not loaded into BW side.
2. Even if the data is loaded into BW side, Some times Due to the incorrect rotines/update rules the data might be showing wrong in the reports.
3. If any issue with varibles/ C.KF's/ R.K.Fs used in the reports, the data will show wrong due wrong calculation.
4. if any wrong selection in the varibles also will show Wrong data.
So, we need to analys all these things and compare with R/3 data,
First we need to check the data in BW Intial load data target by comparing the R/3 data source with extract checker (RSA3)
RSA3 : Extract checker in R/3 side
in some cases, you need to check the data base tables if the datasource is Generic
RSO2 (T.code) - To display Generic data source and findout the tables.
After Analysis, if you find out that if any data is missing from the source system , you need to run Repair Full request, which is not effect previous delta
Repair full request :
Go to info package :>> setting as Full insted of delta
change the setting in menu >> Check mark for repaire full request
Selection : Give the selection for missing record in the infopackage in selection Tab
After this you will get the as per your selections, without distrubing your delta load >> next you can run your delta load as usal
I hope it may help you to analys the issue.
Regards.
Rambabu
Edited by: Rambabu velanati on Mar 24, 2011 12:32 PM

How to identify the locks in oracle db objects? i dont have access to check

How to identify the locks in oracle db objects? i dont have access to check the v$lock or v$ objects. i dont have dba access. what are the symptoms for table, row or objects lock? how v guess it would be lock?
Thanks in advance friends..

I believe you will have to call your DBA on the phone in that case.
You can query something with a select ... for update nowait.
If it raises an exception you can handle it within a when section.
-- Running in one session
SQL> create table t1 as select 1 col1 from dual;
Table created
SQL> select * from t1 for update nowait;
      COL1
         1
SQL>
-- now running in a different session
SQL> select * from t1 for update nowait;
select * from t1 for update nowait
ORA-00054: resource busy and acquire with NOWAIT specified
SQL> set serveroutput on
SQL>
SQL> DECLARE
2    CURSOR cur1 IS
3      SELECT col1 FROM t1 FOR UPDATE NOWAIT;
4    v_col1 NUMBER;
5    locking_error EXCEPTION;
6    PRAGMA EXCEPTION_INIT(locking_error, -00054);
7 BEGIN
8    OPEN cur1;
9 EXCEPTION
10    WHEN locking_error THEN
11      dbms_output.put_line('Busted locking my rows!');
12 END;
13 /
Busted locking my rows!
PL/SQL procedure successfully completed
SQL> Now, surely you won't be able to tell anything else other than there was something locked there.
But none of the details you would find in the views.

How to identify extension sets?

Similar Messages

Maybe you are looking for