How to identify home in places

my Mac has started to incorrectly identify my home location when I take photos on any of my IOS devices. I'm having to correct hundreds of photos.
Wat hat gone wrong and is there a quick fix to replace the incorrect details.
thankd

I do but I have all GPS cameras so use the data they collect rather than assigning location with iPhoto so have even less experience with iPhoto locations - I only use it to view location, not add them
One thing I do do when I have photos misplaced due to some latency in updating the GPS I pick a photos at the correct location and copy it - then go to the photos with the wrong location and use the "Paste location" command to update them - that works well and is easy (my kind of thing )
LN

Similar Messages

How can I have a white page as when I click to Home in place to have the Google search page ?

how can I have a white page as when I click to Home in place to have the Google search page ?

See http://www.google.com/support/toolbar/bin/answer.py?answer=115561 Web-browsing tools : Google new tab page and most visited websites - Toolbar Help

How to identify what are all the events are created in background jobs?

Hi all,
how to identify what are all the events are created for background jobs. And what events gets triggered for a particular job.
thanxs
haritha

Hi Haritha,
JOB is a program which starts to a determined point of time and executes some standard programs in the system. JOBs can be planed to a determined point of time on the regular basis (every night, for example) or to some discret time moments. So, the JOB can be planed and then will be started automatically without the manual start.
Realtime programs are understood in the most cases as actual program execution which is started by somebody to the actual moment of time.
Typically per JOBs some special processes will be started that should be executed automatically and regularly: for example, IDOC application, some correction reports, statistic updates etc.
Standard jobs are those background jobs that should be run regularly in a production SAP System These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
Use
As of Release 4.6C, the Job Definition transaction ( sm36 ) provides a list of important standard jobs, which you can schedule, monitor, and edit.
Standard jobs are those background jobs that should be run regularly in a production SAP System. These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw70/helpdata/en/24/b884388b81ea55e10000009b38f842/frameset.htm
About Events:
Events have meaning only in the background processing system. You can use events only to start background jobs.
Triggering an event notifies the background processing system that a named condition has been reached. The background processing system reacts by starting any jobs that were waiting for the event.
Types of Events:
There are two types of events:
1.)System events are defined by SAP. These events are triggered automatically when such system changes as the activation of a new operation mode take place.
2.)User events are events that you define yourself. You must trigger these events yourself from ABAP or from external programs. You could, for example, signal the arrival of external data to be read into the SAP system by using an external program to trigger a background processing event.The event scheduler processes an event if the event is defined in the system.
For example, if a system (System 1) receives an event from another system (System 2), the event scheduler of System 1 processes the event only if it is defined in System 1. That event does not need to be defined in System 2 (the sending system).
You define an event by assigning a name (EVENTID) to it. When defining an event, you do not define the event arguments.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw04s/helpdata/en/fa/096e2a543b11d1898e0000e8322d00/frameset.htm
When you schedule the process chain or infopackages the jobs associated with it run in the background mode. In case you want to create a job for a specific activity you can do so in SM36. You would be creating jobs that would get executed in any one of the options:
1. Immediate
2. Date & Time
3. After event.
4. After job.
5. At Operation mode.
In case you want to view the job logs go to sm37.
Also Pls check DB02 for database performance and ST03 for workload .
Analyse u will have an idea ,
*pls assign points,if info is useful**
Regards
CSM reddy
null

How to identify the program in which an enhanncement spot should be included?

How to identify the program in which an enhanncement spot should be included? For example I want to validate VA02 for USER authorization. So an enhancement spot should be written in program MV45AFZB. How do you identify this program ?

It depends on where you need to place your modification, the enhancement will be assigned to main program,
if you need to place in an include used by several program you need to make sure which main program is used by your transaction.
In the case of MV45AFZB, the main program is SAPMV45A, but it's easy as this include is used only there,
Max

How to identify ASM DiskGroup attached to which Disks ???

Hi Guys,
In 11gR2 RAC, How to identify which ASM Diskgroup is attached to which Disks...( OS is RHEL 5.4).
We could list ASM Diskgroups by,
*#oracleasm listdisks* but this command doesn't show the disks assigned to ASM DiskGroup.
Even for checking location of OCR and Voting Disks only show Diskgroup name and not the actual disks.
$ocrcheck
$crsctl query css votedisk
( like in 10gR2 RAC, We do entry in /etc/rules.d/udev/60-raw-rules file for raw mapping of OCR, Voting Disk and Other ASM Diskgroup)
Plz help me, As one of the client place, I could see so many LUNs assigned to the Server and not getting exact idea which Disks have been used for OCR, Voting Disk and DATA Diskgroup.
Thanks,
Manish

Well for this you can use oracleasm querydisk.Using this you can identify which device as marked for asm or not. for example you can see this below example.
[oracle@localhost init.d]$ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.4.0 - Production on Thu Jun 3 11:52:12 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select path from v$asm_disk;
PATH
/dev/oracleasm/disks/VOL2
/dev/oracleasm/disks/VOL1
SQL> exit;
[oracle@localhost init.d]$ su
Password:
[root@localhost init.d]# /sbin/fdisk -l
Disk /dev/sda: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sda1   *           1        1305    10482381   83 Linux
/dev/sda2            1306        9401    65031120   83 Linux
/dev/sda3            9402        9662     2096482+ 82 Linux swap / Solaris
/dev/sda4            9663        9726      514080    5 Extended
/dev/sda5            9663        9726      514048+ 83 Linux
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdb1               1        4859    39029886   83 Linux
/dev/sdb2            4860        9729    39118275   83 Linux
[root@localhost init.d]# ./oracleasm querydisk /dev/sdb1
Device "/dev/sdb1" is marked an ASM disk with the label "VOL1"
[root@localhost init.d]# ./oracleasm querydisk /dev/sdb2
Device "/dev/sdb2" is marked an ASM disk with the label "VOL2"
[root@localhost init.d]# ./oracleasm querydisk /dev/sda1
Device "/dev/sda1" is not marked as an ASM disk
[root@localhost init.d]#Also in windows :
C:\Documents and Settings\comp>asmtool -list
NTFS                             \Device\Harddisk0\Partition1           140655M
ORCLDISKDATA1                    \Device\Harddisk0\Partition2             4102M
ORCLDISKDATA2                    \Device\Harddisk0\Partition3             4102M
NTFS                             \Device\Harddisk0\Partition4           152617M
C:\Documents and Settings\comp>answered by chinar.
refer:-how to identify which rawdevice Disk Is named as VOL1 IN ASM from os level
Happy New Year.
regards,

How to identify fake macbook air

hi guys,
i have been using macbook pro for quite sometime an very happy with it. now i am looking for second unit. i cam across a second hand unit of 2013 macbook air. how do i make sure this unit is original? are there any fake product in the market? how do i recognise them?
regards

You could check the product serial number against the online identification sites, that of course
could be faked. Also, if the computer has an OS X and is able to tell you in System Profiler or
other listing of internal hardware, a regular PC hardware would appear a bit different than Mac.
With the questionable product in your possession or close proximity for inspection, you may
find more information. If you can start it & read the information inside, much more is learned.
•How to identify your MacBook Air - Apple Support
Specifications could be cross-checked with online accessible databases, http://everymac.com
shows builds of Apple product listed and if you use an identify by serial number database, to
see what the alleged Apple or PC-fake isn't or is, that should be easy... Easier if you have it.
•Apple MacBook Air Specs (All MB/Air Technical specs) - everymac.com:
http://www.everymac.com/systems/apple/macbook-air/index-macbook-air.html
•Identify your Mac - Lookup unit by Serial Number or Model Number:
https://www.powerbookmedic.com/identify-mac-serial.php
http://www.everymac.com/ultimate-mac-lookup/
If you have downloaded the MacTracker database, it can show you more information on each
model across nearly the entire brand. http://mactracker.ca is a source for this application D/L.
How to find your Mac's model and age? - ASC user tip
Some of these sites also offer visual identification of models, where to look for in-device
serial numbers, some may be hidden or inside; others visible if unit is On, in software.
Hopefully this helps somewhat. Also an indicator may be price. If a new Apple computer or
an iDevice relies on the original owner's Apple ID and their information, it may not be worth
owning unless they transfer it. If the unit has a tie-in to an AppleID and they haven't set it
up for a new user, you may have to take the unit to an Apple Authorized service provider to
have them help set up a new owner (appleID) if you don't know how. -- And take along the
original owner whose ID set up the Mac in the first place, so they can transfer ownership.
A fake product should not need an AppleID or it may have an illegal clone on board. A fake
would probably either be a hack- in tosh or a windows pc that looks like MacBook Air. Or a
copy made by some contractor to look like a Mac. You could look into the Apple site and
check to see how to inquire deeper, in Apple Legal site. Or how to report a fake.
Good luck & happy computing!

How to identify the system generated program for any standrd extraction?

Hi all,
How to identify the standard program generated for any extraction takes place. Is there any tcode to figure out the standard abap prgms for the datasource.
for instance:
for the data source : 2LIS_02_SCL what is the standard extractor program used.
Thanks
Pooja

Hi hemanyt,
i cant find the table RSTRAN active.
Thanks
Pooja

Can't figure out how to use home sharing

Since the latest couple iTunes updates, my family and I can not figure out how to use home sharing. Everyone in our household has their own iTunes, and for a long time we would just share our music through home sharing. But with the updates, so much has changed that we can no longer figure out how to use it.
I have a lot of purchased albums on another laptop in the house, that im trying to move it all over to my own iTunes, and I have spent a long time searching the internet, and everything. And I just can't figure out how to do it. So.... how does it work now? I would really like to get these albums from my moms iTunes, onto mine. I would hate to have to buy them all over again.
If anyone is able to help me out here, that would be great! Thanks!

The problem im having is that after I am in another library through home sharing, I can't figure out how to select an album and import it to my library. They used to have it set up so that you just highlight all of the songs you want, and then all you had to do was click import. Now I don't even see an import button, or anything else like it. So im lost... I don't know if it's something im doing wrong, or if our home sharing system just isn't working properly.
Thanks for the help.

How to identify missing records in a single-column table?

How to identify missing records in a single-column table ?
Column consists of numbers in a ordered manner but the some numbers are deleted from the table in random manner and need to identify those rows.

Something like:
WITH t AS (
           SELECT 1 ID FROM DUAL UNION ALL
           SELECT 2 ID FROM DUAL UNION ALL
           SELECT 3 ID FROM DUAL UNION ALL
           SELECT 5 ID FROM DUAL UNION ALL
           SELECT 8 ID FROM DUAL UNION ALL
           SELECT 10 ID FROM DUAL UNION ALL
           SELECT 11 ID FROM DUAL
-- end of on-the-fly data sample
SELECT '[' || (id + 1) || ' - ' || (next_id - 1) || ']' gap
FROM (
         SELECT id,
                 lead(id,1,id + 1) over(order by id) next_id
           FROM t
where id != next_id - 1
GAP
[4 - 4]
[6 - 7]
[9 - 9]
SQL> SY.
P.S. I assume sequence lower and upper limits are always present, otherwise query needs a little adjustment.

How to create a new place in iPhoto 11 without doing any harm?

Yes, I know how to create a new place for a photo -- theoretically:
Select the photo.
Make sure the Info icon in the lower right portion of the iPhoto window is clicked and the too-tiny-for-any-but-the-youngest-eyes map is displaying.
Click in "Assign a Place..." and begin typing a place that iPhoto will search for. It searches in both "your places" (i.e., those that you have already defined) as well as in Google Maps.
When you see a place in the search results list that you think might be close to the one you mean, select it.
A pin appears on the itsy-bitsy map. Move it to the exact place you mean. You can make controls appear on the map by moving the mouse over the bottom of the map. The controls allow you to zoom in and out, and to change views (Terrain, Satellite, Hybrid). When the pin is where you want it, click it. The current name of the location appears. Modify it to the name you want, then click the check mark.
That's "all" there is to it ... except for a couple of "gotchas."
There's a difference between what happens when you select a place that you've defined and when you select a place that Google found in the search results. If it's a place that you've defined, and you then move the pin to a new location and/or change its name, this will affect all photos assigned to the custom place. In effect, you are modifying the place.
All places have a radius associated with them, thereby making them circles. You can adjust the radius only in the Maintain My Places window. In the itsy-bitsy map it doesn't even appear. However, if the newly defined place overlaps existing ones, all the photos assigned to the overlapped places will be assigned to the new one. Their pins will remain where they were.
Now, before anybody suggests sending feedback to Apple, let me emphasize that I have been sending Apple feedback on the wrong-headed implementation of Places since iPhoto 9.0. New versions have come and gone (the current one is 9.1.2), but these "features" have remained. So my purpose in opening this thread is to consolidate work arounds to these "features" in one place. My work around:
Whenever I define a new place, I select only a single photo. I try to name my places so that I can distinguish them from those that Google finds. In order to avoid Gotcha 1 I select a place that Google finds and try to place the pin close enough to where I want it, but far enough from any other places that I've defined. I give it a name that I can easily find it Manage My Place.
I immediately open Manage My Places and select the new place. I first note the pins near it, then decrease its radius, move the pin to the desired location, note the nearby places, and give it its final name.
I then view Places and navigate to the new place to view the photos assigned to it. If I'm lucky, there's only one. Otherwise, I have to reassign the other photos to their correct places.
Richard

So... in the hope it will not confuse folks more, let me be more specific of a procedure that works for me...
Procedure to create a new My Places location.
OK there is more you can do with a non-GPS Coord linked photo.
Click Info and then click Assign a Place in the lower right of screen. (if your photo has a location linked to it already the Assign a Place will NOT show up.)
Choose a location name near the actual location that Google Maps can find.
Click that location in the Google Maps list that appears and your photo will be temporarily assigned to that location.
Now type over that location name in order to make sure to give that location a unique name that will show up in your My Places list and click that name after you have typed it to be sure it is accepted.
Now in iPhoto click Window/Manage My Places and go the that newly named location in the large My Places map. There's no easy search. You have to run down through the alphabetical list.
Drag the flag to the location you want this place to be and click Done.
The location name is now in your My Places list at the location you dragged the flag to!
It is important to note that only your unique named locations show up in your Places list, so if you want to modify the location coordinates you have to establish a unique name for it.
This is much more complicated that previous iPhoto versions!
But Yeah!!!!!!!!!!
It really works!!!!!!!

How to identify a type of consolidation in a system?

Hi,
I need to understand how to identify the type of consolidation we are doingion the system.
Example like Step consolidation, Simultaneous consolidation or other method.
This will be helpfull for me in doing my currest support issues.
Thanks in advance,
Richard..

Not sure to understand your question.
What is the precise context of your issue ? Is it a problem of SEM-BCS configuration or a general problem on how consolidation works ?

How to identify the user who created the variant

Hi All,
Can anyone tell me how to identify the user who created the variant ?

Hi Dear,
For the same go to SE11 and view the table "VARID". This table give the details of the program,user,variant etc.
From this table u can know which user created the variant. Hope this solve your purpose.
Regards

How can identify the default currency for a customer?

How can identify the default currency for a customer?
I know that this is being determined when you create a sales order for a particular customer, for example, so I could break this process open and find out what it uses. But I thought it worth asking in this forum first.
Blue

Hi Gary,
As per my understanding of your question I am replying , If you are looking some thing else then I request you to please elaborate your query.
If you see the BP sales area data in transaction BP, In billing tab you maintain the currency for a customer which is default currency when you create a sales order.
<b>Reward points if it helps!!</b>
Best regards,
Vikash

How to identify german language in a program

Hi All,
i have one requirement. that is how to identify german language in a program.(suppose text elements, data elements are in german language our program should identify that german language). Anybody have solution for this, pls send me as soon as possible.
Thanks for all in advance.
Thanks & Regards,
Nagarjuna.

Hi Nagarjuna,
2 possible approaches:
1. Source language: Every program is initially created with source language = logon language. Sored in TRDIR-RLOAD.
2. Try to read program texts in specific language (DE).
    READ TEXTPOOL pv_repid INTO lt_textpool LANGUAGE 'D'.
    IF sy-subrc                           = 0.
      MESSAGE s000(R1)
        WITH 'German texts present in' pv_repid '' ''.
    ELSE.
Regards,
Clemens

How to identify fact and dimension tables

Hi ,
We are having the list of parent child relation info for each database tables. Based upon the parent child tables ,needs to identify which table is fact ,which table is dimension .Could you please help me how to identify the fact table and dimensions tables ?
Thanks in advance

Hi,
Refer this link........
http://www.oraclebidwh.com/2007/12/fact-dimension-tables-in-obiee/
Please mark if it helps you.......

How to identify home in places

Similar Messages

Maybe you are looking for