How to identify HR administrator in a workflow

Dear Team,
How can we identify HR administrator for an employee.?
I need to develop a workflow in which when a employee requests the workitem has to go to HR administrator. I was not able to get any clue from TS12300104 or Rule 60100010.
Can any one you help me in this regard,
Thanks a lot in advance
Regards,
Sai

Hello,
HR administrator, is maintained in IT 0001
Test the user with FM : HR_GETEMPLOYEEDATA_FROMUSER
PERSONNELLADMIN, will return the HRAdmin
I suggest you make a copy of of the Std workflow : 12300111
And also a copy of standard approval task (12300104)
Assign the rule : 60100010;and Make the task, a general task;
Don't forget to make neccesary changes in SWFVISU.
Cheers,
Remi

Similar Messages

How to identify whether a multiline container is empty or not in Workflow?

Hi Experts,
Does any1 know how to identify whether a multiline container
is empty or not in a workflow?
Thanks.
Points wil be rewarded.
Vincent

Dear Vincent,
You can get the report name for the Business Object which contains the multi-line container, from the BO itself. Put a break-point in the report and try executing the workflow. The multiline container is like an internal table in the report. See if the internal table is initial while execution.
Regards,
Michael.

How to identify which is rootsite/webapplication url and which are site collection url ?

How to identify which is rootsite/webapplication url and which are site collection url underneath of web application using powershell script in following code?
# Get site objects
$webapplication = Get-SPWebApplication $siteUrl
# Walk through each site in the site collection
foreach($site in $webapplication.Sites)
foreach($subWeb in $site.AllWebs)
$_ = AddLevel123($subWeb.Url)

Hi,
Hope you wanted to know which API is Site collection (SPSite) and Sub site(SPWeb)
$webapplication.Sites = Site Collection (SPSite)
and $site.AllWebs = Subsite (SPWeb)
and see these links - to get webApplication URL
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/e223b607-ab35-454a-a050-1db3005687e5/spwebapplication-url?forum=sharepointdevelopmentlegacy
SPSite Url - SPSite.Url (http://msdn.microsoft.com/en-us/library/office/microsoft.sharepoint.spsite.url.aspx)
SPweb URl - SPWeb.URL (http://msdn.microsoft.com/en-us/library/office/microsoft.sharepoint.spweb.url.aspx)
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b4dfb645-69f4-4abd-947c-64ca42af3a26/script-to-get-list-of-sites-and-subsites
Hope this helps!
MCITP: SharePoint 2010 Administrator
MCTS - MOSS 2007 Configuring, .NET 2.0
| SharePoint Architect | Evangelist |
http://www.sharepointdeveloper.in/
http://ramakrishnaraja.blogspot.com/

How to identify which applicarion is using the DVD burner?

How to identify which applicarion is using the DVD burner? Ot is not allow me to burn the DVDs genetrated in the Final Cut 7

I think you'll find that the application is Final Cut Pro... the message is bug. I get a similar message when disconnecting external drives after using them with FCP (even when the project is no longer loaded.)
As I mentioned above, the accepted workflow is to export the sequence to one of your hard drives using the Export>QuickTime Movie path with Settings:Current Settings and Make Movie Self-Contained checked like this:
This gets you a high quality "master copy" which you open in Compressor for transcoding. You should use the DVD: Best Quality setting for the duration of your movie.
this gets you the high quality MPEG-2 and AC-3 files for DVD Studio Pro authoring.
If you've never used DVD Studio Pro before, you can use iDVD instead. For iDVD, you just drag and drop your "master" on iDVD and it takes it from there. Both make a very professional product.
hope this helps.

WFXLoad : Upload Subscription def. : how to identify event by his name ?

Hello,
I want to upload BES definitions (Event and Subscription) with WFXload Tools ...
For Event it's OK.
In the tag <GUID> I use the value #NEW to generate a new GUID in the PL/SQL packages.
But for the subscription, how to identify the Event by his name in the tag <EVENT_FILTER_GUID> ?
I must use 2 XML definitions. One for the event, the other for the subscription. After upload the event, before upload the subscription, I must get manually the GUID of the event in WF_EVENTS table and modify the subscription definition.
Thanks for your help.
~~~
éric
Version: standalone WF-2.6.2.

Eric,
All you need to do is create the events and subscriptions using the screens on one workflow install and download them in to 2 files using the wfxload utility.
The wfxload generates new GUID for the subscriptions but the GUID for the event will remain same (from the system downloaded from)
You should always create events from one system (workflow install) and download events only from that system.
Cheers!
Raja

How to identify Site Owner in Sharepoint 2010 ?

I have a site, but i have a confusion about how to identify Site Owner.
I know Site Collection Administrator, but i dont understand how to identify SIte Owner.

Site Owner is the user who has full control over the site who can perform all the task related to site like Site Permissions, Manage Lists etc. You can check the associated Site Owner group at
http://siteurl/_layouts/permsetup.aspxwhere
siteurl is your Site URL.
Hope this will help.
Sharepoint Sutra
Sharepoint Consultant

How to identify missing records in a single-column table?

How to identify missing records in a single-column table ?
Column consists of numbers in a ordered manner but the some numbers are deleted from the table in random manner and need to identify those rows.

Something like:
WITH t AS (
           SELECT 1 ID FROM DUAL UNION ALL
           SELECT 2 ID FROM DUAL UNION ALL
           SELECT 3 ID FROM DUAL UNION ALL
           SELECT 5 ID FROM DUAL UNION ALL
           SELECT 8 ID FROM DUAL UNION ALL
           SELECT 10 ID FROM DUAL UNION ALL
           SELECT 11 ID FROM DUAL
-- end of on-the-fly data sample
SELECT '[' || (id + 1) || ' - ' || (next_id - 1) || ']' gap
FROM (
         SELECT id,
                 lead(id,1,id + 1) over(order by id) next_id
           FROM t
where id != next_id - 1
GAP
[4 - 4]
[6 - 7]
[9 - 9]
SQL> SY.
P.S. I assume sequence lower and upper limits are always present, otherwise query needs a little adjustment.

How to change your Administration Server password when you're locked out

How to change your Administration Server password when you're locked out
The Netscape server products are all managed by a single administration
server, which gives you a web forms-based interface you can use to
configure them, start/stop them, check their logs, and so forth.

There are three levels of protection that keep the general public from
being able to get into your administration server and mess up the
configuration of any Netscape servers you have installed:

<OL>
<LI> Obscurity: Your administration server can run on any port you'd
like (usually something between 81 and 30,000), so if an attacker
doesn't know what port to find your admin server on, he can't get
into it.
<LI> Host restrictions: You can tell your admin server to only allow
connections from specific hosts, and to reject all other hosts.

<LI> Password protection: Even if a user connects to your admin server
from a valid host, he won't be allowed to get into even the first
page unless he presents a valid username and password.
</OL>

If you, the legitimate administrator of your web server, are unable to
access the administration server (if you forgot your password or the
admin port number or if you accidentally locked your own site out),
then here is how to get past each of these levels of protection:

<OL>
<LI> If you don't remember what port your administration server is
running on, just look in your "ns-admin.conf" file, which is in
the "admserv" directory under your Netscape server directory.
(For 1.x web servers on Windows NT, run "regedt32" and go to the
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration" section).
You will see a "Port" entry there that specifies what port your
admin server is on. You can change this value if you want your
admin server to run on a different port, but make sure you restart
the admin server after you change the value.

<LI> If your admin server is complaining "Unauthorized host" when you
try to connect to it, then you can open it up to all sites by
going into the "ns-admin.conf" file or the "Administration"
section of your NT registry, as described above, and deleting the
lines for "Hosts" and "Addresses" (either one of those might not
be present) then restarting your admin server (on Unix run
"stop-admin" then "start-admin"; on NT go into the Services
control panel and stop/start the "Netscape Administration" or
"Netscape Admin Server" service). You will then be able to get
back into the admin server, where you can then try new settings
for your host and address restrictions if you wish.

<LI> If you have forgotten the password to your admin server and now
you can't log into your admin pages, all is not lost! Go into
your "ns-home" directory, and into the "admserv" directory under
that. You should find an "admpw" text file containing a simgle
line of text, something like this:
admin:lnOVeixulqkmU
The first part of that line is the name of your admin account
(usually just "admin"), and the second part is your admin
password, encrypted. Edit this file to remove the encrypted
password so that your file looks like this:
admin:
Then shut down your admin server, bring it back up again, and log
into your admin server but don't give any password. It should let
you in, at which point you can then go to the appropriate
configuration page to set a new admin password, and then you're
back in business.
</OL>
Note that because it is so easy to change the admin password this
way, it's good to periodically make certain that your admin
password file and your web server's configuration files are not
left world-writable, and that only trusted people have access to
them. (By default they're not world-writable, but it's good to
make sure of this from time to time.)

If you mean that yu forgo the password for yur encrypted backup then you can only:
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
Above from:
http://support.apple.com/kb/HT4946

How to identify a type of consolidation in a system?

Hi,
I need to understand how to identify the type of consolidation we are doingion the system.
Example like Step consolidation, Simultaneous consolidation or other method.
This will be helpfull for me in doing my currest support issues.
Thanks in advance,
Richard..

Not sure to understand your question.
What is the precise context of your issue ? Is it a problem of SEM-BCS configuration or a general problem on how consolidation works ?

How to identify the user who created the variant

Hi All,
Can anyone tell me how to identify the user who created the variant ?

Hi Dear,
For the same go to SE11 and view the table "VARID". This table give the details of the program,user,variant etc.
From this table u can know which user created the variant. Hope this solve your purpose.
Regards

How to make a restart of the workflow in a process controlled workflow?

Hi Experts,
How to make a restart of the workflow in case of process controlled workflow? Scenario is like this:
The user has created a shopping cart with 1000 USD. The process schema has three process level with the first level being approval with completion.
The first level being executed by the responsible purchaser. Here, the purchaser adds the source of supply and changes the price of the shopping cart 2000 USD and approve the shopping cart.
Now, I want the approval task to start from beginning so that the requestor can know the changes and accept/reject the changes.
Thanks and regards,
Ranjan

Hi,
Restarting workflow goes to 1st level approval step. It is not requester.
I think you need to set condition for "Acceptance by Contact Person" in Define Process Level.
Regards,
Masa

How can identify the default currency for a customer?

How can identify the default currency for a customer?
I know that this is being determined when you create a sales order for a particular customer, for example, so I could break this process open and find out what it uses. But I thought it worth asking in this forum first.
Blue

Hi Gary,
As per my understanding of your question I am replying , If you are looking some thing else then I request you to please elaborate your query.
If you see the BP sales area data in transaction BP, In billing tab you maintain the currency for a customer which is default currency when you create a sales order.
Reward points if it helps!!
Best regards,
Vikash

HOW TO CREATE and USE EVENTS IN WORKFLOWS .

HOW TO CREATE and USE EVENTS IN WORKFLOWS with the help of classes.
What i am doing is..
open se24
event tab->event name->parameters
method tab->method name->event handler->copy parameters
interface tab->if_workflow->enter
tell me what else to do step by step
Another important thing is that HOW to use these class events to trigger the workflows.
REPLY ASAP
THXS IN ADVANCE

Hi,
Pl. see this blog...
Raising ABAP OO events for workflow
Regards,
JOy.

How to identify german language in a program

Hi All,
i have one requirement. that is how to identify german language in a program.(suppose text elements, data elements are in german language our program should identify that german language). Anybody have solution for this, pls send me as soon as possible.
Thanks for all in advance.
Thanks & Regards,
Nagarjuna.

Hi Nagarjuna,
2 possible approaches:
1. Source language: Every program is initially created with source language = logon language. Sored in TRDIR-RLOAD.
2. Try to read program texts in specific language (DE).
    READ TEXTPOOL pv_repid INTO lt_textpool LANGUAGE 'D'.
    IF sy-subrc                           = 0.
      MESSAGE s000(R1)
        WITH 'German texts present in' pv_repid '' ''.
    ELSE.
Regards,
Clemens

How to identify fact and dimension tables

Hi ,
We are having the list of parent child relation info for each database tables. Based upon the parent child tables ,needs to identify which table is fact ,which table is dimension .Could you please help me how to identify the fact table and dimensions tables ?
Thanks in advance

Hi,
Refer this link........
http://www.oraclebidwh.com/2007/12/fact-dimension-tables-in-obiee/
Please mark if it helps you.......

How to identify HR administrator in a workflow

Similar Messages

Maybe you are looking for