How to identify the info package deleted by someone in process chain?

Hi all,
I can see a couple of info packages were deleted in the production system and it was removed from the process chain too!!
how to identify who has deleted the info package in the production system:?
Thanks

Can you is there any transport available with the Infopackage deletion activity?
in SE01 you can check in production system and check if your IPAK is stored in it or not..? IF yes then you can check the user.
Also you can track is there any deletion transport has come from D to P or Q to P? Can you check whether the IPAK is available in D and Q?
Also you can check the process chain recent modified by in RSPC and check if there is any user details were captured?
OR you can also look at in transaction SLG1. Check for the logs..
Hope this helps,
Murali

Similar Messages

How to Schedule the info package groups?

Hi,
To scheudle the info package group is it enough to shcedule at infopackage group level or do I need to schedule each info pcakages?

Hi ,
You can execute at Group level.
Plz find teh steps for creation and sheduling of IP Group,
1. GO to Adminsitrator workbench RSA1 > Infosources
2. Create your infopackage do not select option but select data load
immediately get out of infopackage prior to going to step 3
3. Click on icon show infopackage groups
(icons are update tree, monitor, display node log, search in subtree,
legend, and show infopackage groups)
4. This will create another window. Now you can create your infopackage
groups. Right Click on folder (infopackage group)
enter long description name, go back to your infopackage and pull it
to the infopackage group
(it's a drag and drop to long description name you just created and
remember it will be on the bottom of the list most likely)
5. Click on infopackage group and its time to select which on to run
first and time your going to schedule it.
INFOPACKAGE
a. Execute package should have a check mark without it itwon't run.
b. Start Sequence (depends on which one you want to run
first for my example its) 1
c. Selection exists (is created when you pull youinfopackage to group)
d. Maintain infopackage is a pencil and will take you therefrom hereInfopackage is your name from the infopackage you pulledover
e. Data type (is created when you pull your infopackage togroup)
Check whether contents was updated without errors beforeyou start next request
(I highly recommend you check this because if will stopyour process if a infopackage fails)
f. Delay until the start of the next request (not necessaryto check)
g. Technical name
Schedule
Selection Options: Immediate (now)Date time (preselected time) if youcheck period and period valueshere it can be run eachday or specific dayAfter job
After event At operation mode
Regards
Marasa.

How to determine the source of Events triggered in a process chain

Hi ,
We have almost a 100 process chains, and of these approx 20-30 local process chains are triggered by events raised within other process chains. These events are raised via BP_EVENT_RAISE using the ABAP process type.
However, our problem is to identify the source of these event trigger - i.e. which process chain triggered this event ?
Looking at SM64, the event history does not display the source for these events.
Is there any table or program that we can use to determine the source of these events which are triggered.
Any help is much appreciated and points awarded.
thanks
BK

Hi,
do check in the program /SSA/BWT . or TCODE - ST13 -- enter BW-TOOLS and execute. -- Choose Process chains and execute --- Select the date and time for which you want to see the process chains and execute again.
This will give you the entire list of process chains triggered, status, timings(start, end, overall runtime). Once clicked on the process chains it will show you the steps in theprocess chains, data loaded in the data targets, source system, etc...
hope it helps.

How to find the info packages which have periodic data selections?

Hi,
is there any way we can find the list of infopackages that have data selection enabled only on time? ( say calendar day )
if not, is there anyway to find the list of infopackages which has data selection?
Thanks,
Ravi

Hi Ravi,
what do you mean exactly?
if you are in SE16 or SE11 in the selection screen, you can enable these fields for the selection via menu Setting / fields for selection; then mark FIELDNAME and IOBJNM.
then enter OBJVERS = 'A'
and e.g. IOBJNM = 0CALDAY
or double click in the input box of IOBJNM and select "not equal to" and leave the input box empty in order to see all IPack with a selection on any IObj.
hope this helps otherwise pls let me know
Olivier.

Serious Issue - CRM 2007 issue - How to identify the Log in CRM

Hi Experts,
How to identify the Billing Account Deletion log. Some billing accounts has been deleted from BUT000 table. We have to find out -who has deleted and when ???
Please help us to identify the log. I think in SAP log should be maintained somewhere in CRM.
Thanks & Regards,
Amit Nanda
9999795569

hi, I remeber the there is a function name like CRMXXDocumentXXlock which is be called in standard program to maintain order.
I can't login a crm server, can't offer you the accurate name, you can do a search in system.

How to identify the infosource name for any ods zpxrrm?

hi all,
How to identify the info source name for any ods that have created.
thanxs
haritha

Hi Haritha,
Check the datasources from which the data is coming to the ODS.Take the technical name of the data source.Check in Infosources Tab.There you can find in which infosources the ODS is present.
Hope this solves
Regards
Karthik
Assign points if helpful.

)How can we schedule the info package daily run at 6 AM, with out useing in

Hi
   Can any one explain 1) what is information broadcasting &how can we use this.
2)What are the settings we have to do when we use the charts in WAD's
3)How can we schedule the info package daily run at 6 AM, with out useing in process chains
Thanks
Bharath

Hi,
Information broadcaster :
      you can precalculate and distribute(thru mail) the query, workbook and webtemplate through online link or html file to the receipents (users).
have a look at the below link.
     http://help.sap.com/saphelp_nw04/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm
Infopackage scheduling:
     you can schedule the infopackage daily at your desired time .In the schedule tab ,select the start later in background and in the scheduling option give the date and time and give the period values as daily.
Regards,
Siva.

Data deletion routine in the info package

Hi All,
I am writting an data deletion routine in the info package.
it is working fine...
but when we are transporting the info package, that routine is not getting transported.
we have tried sending ths info package through a transport connection.
but still it is not taking the routine to next system.
please let me know if any one has a solution for this.
Thanks,
Mugdha

Hi Mughda,
Collect the infopackage using transport connection, While collecting the infopackage make sure that Routines are also collected in the same request.
Else most of systems will have authorizations to create infopackages, so try to create one IP and use the routine in IP.
Hope this helps.
Rgs,
I.R.K

Dump error while creating or double click the info package

Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
Steve

Here are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks.

How to identify the Process chain for infopackage in 3.5?

Hi all,
I am currently working on bw 3.5? I can see couple of info packages created in the production scheduled through process chain.
How to identify which process chain is scheduling those infopackages?
for instance :
customer master is loaded through a process chain.
I knew the info package name but i dunno what process chain is scheduling that customer master?
Can anyone help me on this!!
Thanks
Pooja

Hi,
There are two ways:
1. When you open that info-package on the top you'll see an icon for Process Chain Maintenance, just click on that and it will take you to the process chain.
2.Goto table -> RSPCCHAIN and enter the info package name in process variant , then it will show you all the process chains used under the IP
Hope this helps.
thanks,
rahul

How to identify the right extractor

hi all,
i have a custom extractor(ABAP report) to pull the Std cost info into BW from R/3. I would like to remove this custom extractor and go for a generic one. Can anyone provide me the steps on how to identify the appropriate generic extractor.
i know the underlying tables names....eg KEKO, KEPH etc

Hi Vinod,
There will no appropriate generic extractor as such. Generic Extration itself means creating a custom extractor. All you need to do is
1.Goto RSO2, select the type of datasource(i.e transaction or Masterdata)
and click on create
2. Specify the table name, ( if you are pulling data from two tables then you have to create a view at Tcode se11, then you need specify that view here)
3. click on generate
This will generate the datasource
You can refer the following doc for further assistance,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Thanks
Vj

How to identify the installed Weblogic Server and JDK are 32bit or 64bit?

Hi everyone,
I have a question ~
Both Weblogic Server and JAVA JDK are installed on the server already, but I only know the Weblogic Server is 10.3.4.0 and JAVA JDK version is 1.6.0_25.
I know the 64bit Weblogic Server installation file is a wlsXXXX_generic.jar package and 64bit JAVA JDK needed also.
But, since the Weblogic installed already, there are no such installation files on the Linux Server now.
I have tried the "java -version" for java version and check the Weblogic version from Weblogic console.
How to identify the installed Weblogic Server and JDK are 32bit or 64bit with Linux command? Or is there any way to check it?

What you can try to do is use WLST (or an MBean browser, such as JConsole or JRockit Mission Control) and connect to the adminserver.
For example when using WLST:
# set the environment by using setWLSEnv.sh (located in the ${WL_HOME}/server/bin directory).
# start WLST by using: java weblogic.WLST
# connect to the adminserver
connect('adminusername','adminpassword');
# change to the serverruntime environment
serverRuntime();
# show the attributes
ls();
# Here an attribute is shown called WebLogicVersion that shows the version of WebLogic
-r-- WeblogicVersion WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638
# Note that this does not show if is 32 bits or 64 bits to retrieve this information you have obtain the JVM version
# change the directory
cd('JVMRuntime/AdminServer');
# show the attributes
ls();
-r-- Version R28.0.1-21-133393-1.6.0_20-20100512-2126-linux-x86_64
# when you have something like x86 at the you are running a 32 bit version, if you have something like x86_64 you are running a 64 bits versionAs mentioned above you can also retrieve this information by using a MBean browser.

Error while monitoring the Info Package

Hi,
While monitoring the info package, I'm having the following errors:(The data source is of type standard R3 Datasource).
" Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get. "
pls help me in this...
With regards,
Yokesh.

Hi Yokesh,
Try these to solve your issue,
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
OR
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Hope it helps
Regards,
Arun.M.D

How to identify the standard ods / cubes are delta capable or not?

Hi All,
How to identify the standard ods / cubes are capable of handling delta o not ?
Pls advise me on this!!
Thanks
Pooja

Hi Pooja
Delta capable is based on datasource but not on ODS or cube.
You can get this info from ROOSOURCE table,give data source name and check the field "DELTA".
If the field is left blank,it implies that the datasource is not delta capable.
Regards
Jagadish

Dump Error while Creating the Info Package

Hi,
I have created Customized ODS and used Generic data sources.I have loaded full Upload to ODS. Created Info Packages for Init delta and Delta for delta loading. I have ran Full Upload and while I am trying to run Init, I am getting the error.
While I am trying to open the Info Package, I am getting Dump error message.
Dump error Message :
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
While i am trying to Create New Info Package, the systems gives the Dump on the System
Please help on this issue.
Thanks,
Siva.

Hi,
Actually, when we want to have delta loads in future, then we can just have one infopackage with init delta infopackage, so that when it runs for the first time, it pulls all the records and from next time onwards it will pull the delta records only.
But as you have done the full load with infopackage, now just create a delta infopackage, no need of init delta infopackage, this is the reason, its giving dump.
Hope it has given some insight.

How to identify the info package deleted by someone in process chain?

Similar Messages

Maybe you are looking for