How to identify the meta chain in which the Process Chain is used

Hi,
   I had a Process Chain which is designed to Load Transaction Data.
   This process chain is scheduled to start as a part of Meta Chain...
   How can i locate that META chain in which this Process Chain is used
Thanks

Hi
There is no where used list for Process chain, but you can check it in table RSPCCHAIN.
Give details as below:
Version is 'A'.
Process Type is 'CHAIN'.
Process Variants = 'enter technical name of the local chain'.
now hit execute button.
You can see the list of process chains under Chain ID column.
Ravi

Similar Messages

I managed to transfer the music from 1 pc to 1 other pc (to be played by iTunes). Bit didn't fixe the transfer of the meta data (for example the rating). Does anyone know how to use your old playlists, etc..(= meta data) on the other PC? So, please help!

I managed to transfer the music from 1 pc to 1 other pc (it is played perfectly on the other PC (Windows 7- pc) by the newly downloaded and installed iTunes, version 10.6.1.7). But I didn’t fix the transfer of the meta data (for example the rating). Does anyone know how to use (or import) your old playlists, etc..(= meta data) on the other PC? So, short: how to migrate the meta data from one pc to an other pc?
It's a pity that it seems not to be possible to import on the new pc e.g. the ratings!!!
I don't want to start again with rating my (beautiful classical) music!
Thanks, from Amsterdam, NL

Did you do the move via Home Sharing, astro?
If so, perhaps try the instructions from the following post:
Re: i transfered itunes to my pc playlists did not go

TS1811 Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows

Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above "
iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
"....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 same

Archived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
Products Affected
iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
This article has been archived and is no longer updated by Apple.
Symptoms
After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
Resolution
The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
Important: You must be logged in as an Administrator.
Click the Finder icon in the Dock.
Choose Go to Folder from the Go menu.
Type /Library/Preferences/SystemConfiguration
Click Go.
In the Finder window, locate the file named NetworkInterfaces.plist.
Drag this file to the Trash.
Restart the computer.
Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
To refresh your network settings, from the Location pop-up menu, choose New Location.
Type a name for your location and click OK.
Click the Apply Now at the bottom right to accept the changes.
If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases.

How to Identify incoming and outgoing IDOC in the system for last one year.

Dear All,
How to Identify incoming and outgoing IDOC in the system for last one year.
Regards
Ashok

Dear Anindya,
I used WE05 the result by giving direction outbound.Then on created field i put the value date.I m getting the output in the no of idoc number.
This is only the way to identify?
Thnx
Ashok
Edited by: ashok singh on Oct 22, 2009 8:40 AM

How to get rid of a window which says: CalendarAgent wants to use the "login" keychain

How to get rid of a window which says: CalendarAgent wants to use the "login" keychain

I would get free EasyFind (Spotlight will be a total waste of time), and search for caremefile and caremefile.info. If it comes up with anything, right-click and select move to trash, or just destroy. Since you didn't install anything, shouldn't be necessary to authenticate with the admin password before it will move to trash. Could also click on reveal in finder, which will allow you to see the actual location. Set it up as per the screenshot below.

How can we track the entire event in which the form mode gets changed?

If the form is in OK Mode and if the user edits any field(Including UDF Window Fields). form mode changes to Update...So at that time, how can we track the entire event in which the form mode gets changed?
Thanks
Hari

Dear hari angamaly,
You could get the form mode by FormMode Property in ItemEvent Object in UI API.
Best Regards
Jane Jing
SAP Business One Forums team

The user account in which the Oracle VSS Writer Service is running does not have the DBA privileges to log in to the Oracle instance.

VSS-00011: Connection to database instance <instance_name> failed.
Cause : The user account in which the Oracle VSS Writer Service is running does not have the DBA privileges to log in to the Oracle instance.
Action : Run the Oracle VSS Writer Service in a user account that can connect to the Oracle instance with DBA privileges.
I have assigned ora_dba group to the user that runs the Oracle VSS Writer Service which is the only Oracle solution but still getting
the above error. Was advised to raise the issue here that it is an OS issue. Pls help

The user account cannot access Oracle Database instance. And also how do you temporarily disable security software on the server.
Have you checked what I already asked for? "Try using the user account and access the Database Instance.
That will let you see if the problem is with the user account permissions or not."
If this does not help then you can contact Oracle as suggested by Dave.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Changing the Background server information of mulitple process chains

Hello Friends,
I am looking for a program or any other way by which I can modify the Background server information of mulitple process chains at once.
I am not really sure whether we have any such programs. Any help would be highly appreciated.
Thanks,
Vinoth V

Hi Vinoth,
RSPCCHAINATTR table can give information regarding process chain list with server names. you can create custom program to modify it. Input parameters can be process chain name and server name.
But you need to take care of authorizations for this table.
Hope this helps.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

: Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
The FP-1000/1001 seri
al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
Regards,
Aaron

Need the the underlying table names which the Material Plan Detail Search p

Our supply planning users would like to obtain the demand and supply plan for a bunch of given parts by running a query against some tables. The data they need via a PS Query output in Excel format is the same data that is provided by the Material Plan Detail page in PeopleSoft Supply Planning (Menu Path: Supply Planning >>>Solve Plan>>>> Material >>>>>>Material Plan Detail). The main underlying table behind this page is PS_PL_MRP_DTL.
The problem is that this table contains data for only one Part Number (INV_ITEM_ID). The data is populated when Item ID is selected on the Material Plan Detail Search page.
What are the underlying table names which the Material Plan Detail Search page brings together to present the information for the selected part number on the target page (The Material Plan Detail page)?
If you could tell us the underlying table names (which the Material Plan Detail Search page brings together) we can write a query to present the data to the users for multiple part numbers at a time and not just one part number at a time.
Any help would be greatly appreciated.
We are on FSCM 8.9 Bundle 13
Thanks in advance.

The ERD's for FSCM 8.9 are available from following link
PeopleSoft Enterprise Financial Management 8.9 Entity Relationship Diagrams [ID 979359.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=979359.1
Hope it contains the info you are looking for.
Hakan

[CS6]Get the app version in which the document was first created

Hi All,
Is there a way to get the application version in which the document was first created?
Eg: I have a CS6 plugin in which I want to know wether the current document was originally created in CS3 or CS5 or so on.
Any help will be highly appreciated.

I hope that's what you're looking for
        const char* szFileName = "path_to_indd_file";
        FILE* pFile = fopen(szFileName, "rb");
        fseek(pFile, 0x1D, SEEK_CUR);
        int32 ver_maj, ver_min;
        fread(&ver_maj, sizeof(int32), 1, pFile);
        fread(&ver_min, sizeof(int32), 1, pFile);
        switch (ver_maj)
            case 5:
                CAlert::InformationAlert("CS3");
                break;
            case 6:
                CAlert::InformationAlert("CS4");
            case 7:
                ver_min == 5? CAlert::InformationAlert("CS5.5"): CAlert::InformationAlert("CS5") ;
                break;
            case 8:
                CAlert::InformationAlert("CS6");
                break;
            case 9:
                CAlert::InformationAlert("CC");
                break;
            default:
                CAlert::InformationAlert("Unknown version");
                break;
        fclose(pFile);
Regards
Bartek

What are the practical differences betweens infopackages and process chains

Hi,
what are the practical differences betweens infopackages and process chains.
Thanks,
cheta.

Hello BW,
Hope the following links will give u a clear idea about process chains
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
regards,
Muralidhar Prasad.C

Can we get the porlet name of which the JSP file is resided ?

Hi all,
Can we get the portlet name of which the JSP file is resided?
Sincerely,
Alan.

you could try the following code
<%@ page import="com.bea.portal.model.Portlet"%>
<%@ page import="com.bea.portal.model.PortletState"%>
<%@ page import="com.bea.portal.render.servlets.jsp.PortletRenderHelper"%>
PortletState portletState = PortletRenderHelper.getPortletState( request);
String portletName = portletState.getDisplayName();
"Alan Liu" <[email protected]> wrote:
Hi all,
Can we get the portlet name of which the JSP file is resided?
Sincerely,
Alan.

Getting the current path from which the form is runnig in 9i OAS

Hi,
We are using the built in Get_Application_property to get the
current path in which the form is running. However this does not
work in 9ioas and it only returns the form name and not the full
path. Does anyone have any solutions to this problem?
Thanks in Advance
Jeet

Place it in the classpath, then you can use ClassLoader#getResource().

How can we recognize the time taking for executing any process chain

Hi,
I have one metachain which consists of several local process chain. It was executed successfully. So how can I find out total time for executing this meta chain.Is there any way to find out that this process execution time is lile some hours and some mins.

ST13 trans description is Analysis & Service Tools Launch pad and is part of the ST-A/PI plugin. See Note 69455 - Servicetools for Applications ST-A/PI (ST14, RTCCTOOL, ST12) aand talk to your Basis folks to find out if they can install it since it sounds like it is not installed at your site.
Here's a list of functions the tool provides - only some are BW specific, so if you can not get ST13 authorization, see if you can at least run the pgm
Analysis/Service Tools
Name                     Title
RTCCTOOL              SAP Servicetools Update
ST12                        Single transaction analysis
SDCCVIEWER          SDCC: View data from ST-A/PI subroutines
SOS_CUSTOMER_DATA                Customer Checks for Security Optimitation
BATCH_JOB_ANALYSIS               Batch job analysis
CMO_SYSTEM_MONITORING            CMO - System Monitoring
ITSTRACEVIEW                     ITS trace viewer (SAPjulep) for EBP/CRM
STAD_DATA_GET                    Select STAD data and put to download
BPSTOOLS                         BW-BPS Performance Toolset
BIIPTOOLS                        BI-IP Performance Toolset
BW_QUERY_ACCESSES                BW: aggregate/InfoCube accesses of queries
BW_QUERY_USAGE                   BW: query usage statistics
BW-TOOLS                         BW Tools
SEM_BCS_STATISTIC_ANALYSIS       SEM-BCS: Statistic Analysis
BWQUAC_CUST                      BW Query Alert Collector Customizing
TABLE_ANALYSIS                   Table Analysis Tools
UPGRADE_TOOLS                    Tools for Upgrade
MASS_MAN_MONITORING              Monitoring for Mass Data
CUST_DMA_TAANA                   DVM: Settings for ST14 CA
PROJBROWSER                      Service Software: Local project browser
ANALYSISBROWSER                  Service Software: Analysis browser
SDCC_DOWNLOAD_SIMULATION         SDCC download simulation for ST-A/PI collectors
TEXTBROWSER                      Service Software: Short&Longtext browser
SET_SDCC_PRODUCTIVE_CLIENT       Manually set analysis client for SDCC datacollection
There were a few OSS Notes relating to ST03N dumping you might want to review to see if they need to be applied
Nothing is ever as easy as it ought to be.

How to identify the meta chain in which the Process Chain is used

Similar Messages

Maybe you are looking for