How to identify the right Install Disc Version for a specific mac model???

Hello
i hope someone here can help me here...
I have 12 mac mini's and about 20 Packs of the original OSX 10.4.x CD'/DVD's (the grey ones).
How can i find out witch CD (and AHT) is the right one for witch mac mini model? They all have the line 'mac mini' but the are different Versions of OS and AHT and every time when i try this i get the wrong one for a specific model.
I have been looking for more detailed informations but can't find anything!?
Any Idea?
Why Apple does not provide a table with all Model Numbers and e.g. the fitting AHT Versions?
Heeeelp pleeeeease - i am going crazy here...
Thank's !

Hello iKing
Apple keeps that info close to its chest, because the whole idea of the grey disks is to limit their currency as potential upgrade disks in the secondhand market.
So rather than post here in this user's forum, instead contact Apple and explain your problem and provide the serial numbers of your Mac minis and Apple should be able to tell you the corresponding version numbers of the relevant disks.
And after, I'd suggest use a texta/soft marker pen on the CD/DVD's to pair them with their hardware.
A spelling error was edited.

Similar Messages

How to identify the bill-to-site location for a customer

Hi All,
How to identify the bill-to-site location for a customer.
I want to determine the language output of the AR invoice report based on the bill-to site address.
If the bill-to site is located in Sweden, the document should be in Swedish. If the bill-to site is located outside of Sweden, the document should be in English.
I have defined a query but not able to identify from which column I can identify the bill-site-location.
select --a_bill.org_id,party_name,account_number,a_bill.CUST_ACCT_SITE_ID
from
apps.hz_parties party
,apps.hz_party_sites party_site
,apps.hz_cust_accounts b
,apps.hz_cust_acct_sites_All a_bill,
apps.hz_locations loc,
apps.hz_cust_site_uses_all u_bill,
apps.ra_customer_trx_all trx
where party.party_id=party_site.party_id
AND a_bill.party_site_id = party_site.party_site_id
AND b.party_id = party.party_id
AND loc.location_id = party_site.location_id
AND u_bill.cust_acct_site_id = a_bill.cust_acct_site_id
AND trx.bill_to_customer_id = b.cust_account_id
AND trx.bill_to_site_use_id = u_bill.site_use_id
Thanks,
Joohi

Hi ,
Check this apps.hz_cust_site_uses_all here site_use_code will be there , you can find Bill_To Ship_to , from there you can find the site_use_id and location Id
Thanks
Shagul

How to identify the Stanadard Extractor will support for Real time Data

How to identify the Stanadard Extractor will support for Real time Data Acquisation . Enabled

Hi
In the ROOSOURCE table you can find the extract structures, go through all the fields of the extractor and if you find all of your equired fields exist ok else try to enhance for teh needed fields and go with user exit to populate the data for that fields'

How to identify the solman7.1 netweaver version

HI
Can any one guided how to identify the solman7.1 netweaver vesion, bit confusing, i want install some support packs for netweaver in my solman system.
confusing , i want to know my solman 7.1 netweaver version?
regards
vreddy

Hi Vreddy,
Check the version for components like SAP_BASIS , SAP_ABA which are netweaver components.
That will be version of Netweaver for solution manager.
Regards,
Archana

How to identify the right extractor

hi all,
i have a custom extractor(ABAP report) to pull the Std cost info into BW from R/3. I would like to remove this custom extractor and go for a generic one. Can anyone provide me the steps on how to identify the appropriate generic extractor.
i know the underlying tables names....eg KEKO, KEPH etc

Hi Vinod,
There will no appropriate generic extractor as such. Generic Extration itself means creating a custom extractor. All you need to do is
1.Goto RSO2, select the type of datasource(i.e transaction or Masterdata)
and click on create
2. Specify the table name, ( if you are pulling data from two tables then you have to create a view at Tcode se11, then you need specify that view here)
3. click on generate
This will generate the datasource
You can refer the following doc for further assistance,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Thanks
Vj

HR - How to identify the list of infotype populated for a pernr.

Hi,
When we go to pa30 tcode, and input a pernr and press enter, we can see the list of infotype populated for the particular pernr with a "tick" symbol. I would like to know, how SAP identify the same. Is there any table in which these information is stored.
Please do let me know the detail asap. This is urgent to me.
Regards
Gopalakrishnan S

Hi,
You can run a report named "RPLINFC0" to get list of infoypes which are used for a PERNR.
I think its enough for you.
Regards,
Purnima

Install Snow Leopard for a specific mac

Using the retail Snow Leopard disc, is there a way to force it to install all the needed parts for a specific mac? My example is: I have a Mac Mini I want to use to set up what will be a replacement hard drive for a MacBook Pro. I want to make sure the OSX that gets installed for the MacBook Pro has all it needs to function as if it came directly from Apple or in other words, it's own specific default install.

My MacBook (2008) has all the same components listed in System/Library/Core Services and System/Library/Core Services/Menu Extras as my Mac Pro (2007). Even though the MacBook doesn't have a need for things like the Expansion Slot Utility and Memory Slot Utility and my Mac Pro doesn't use the IrDA.menu or ExpressCard.menu.
I don't believe there is a specific model install unless your computer came out after the retail disk was made but then all you would have to do is install all the updates and it should work. I believe I've even booted my laptop off of my desktop hard drive in target disk mode for troubleshooting/repair and don't recall seeing anything odd as far as menu items go (but its been a while). I could do it again if you really want but it's a bit of a hassle.

How to find the right customizing adapter object for a R3 table?

I customized a document type ZCRM in the R/3. Now i want to do the synch load for document types using R3AS to see if it goes to the CRM system.
When i check TR VOV8 in R/3 customizing, i see that table TVAK is used in R/3 to store my document type ZCRM
Then i try to find out, to which customizing adapter object table TVAK belongs. It is described in course TCRM20 Unit 9: I check table SMOFTABLES in the CRM system using TR SE16 and search in the column R3TABNAME for tablename TVAK. But it isn´t there...
What am i doing wrong? How can i transfer my document type?
Thank you

Thanks - you are right - document types/transaction types and item categories cannot be transfered at all
I just transfered customizing adapter object DNL_CUST_PRICE because R/3 table T052 (payment terms) is included in this adapter object. I customized payment term ZCRM in R/3. A check shows a green light. Now i want to check in which table in CRM my payment terms landed?
Table T052 does not seem to exist in CRM.
A detail insight in adapter object DNL_CUST_PRICE by transaction R3AC3 to check the target table in CRM shows an empty column 'Mapping structure target site'. Where could i look?
Thank you

Installed the latest flash player version for safari on mac but not working

I have installed the latest version of flash player as prompted by facebook. when i go to use it, facebook keeps telling me to install the new update. Please help. I am running Safari version 6.0.5. I have run the install a couple of times, it says installation is complete. But Facebook keeps prompting me to upgrade. I have installed, shutdown the computer and restarted but yet I still get this message.

Tested with FF6 beta. MouseCursors do show again

How to identify the project in CMOD used for a particular data source

Hi
I had a Business Content Data source which is enhanced with ZZ fields and user exit is written in CMOD.
How can i find in which project used to write the code for that particular data source.....
When i check CMOD i can find nearly 10 to 20 different projects
Thanks

Hi,
One simple way is goto CMOD and give project names with Z* or Y*. First findout the naming convensions following in your project and see.
Then gibe projects one by one and select COMPONENTS option and click on Display, if you find the following Function Exits means it is our DataSource project
EXIT_SAPLRSAP_001
EXIT_SAPLRSAP_002
EXIT_SAPLRSAP_003
EXIT_SAPLRSAP_004
Thanks
Reddy

How to Identify the Network Topology being used for a running ForeFront TMG Stand Alone array?

Hello Experts,
My client has decided to move their datacenter from one location to other including the ForeFront TMG servers which are being used as Reverse Proxy and TMG Gateway in DMZ environment.
I need to know the network topology used for this configuration so that I could chose the same topology when creating new TMG environment at new datacenter. Here are some details :
1. There are 2 TMG servers configured in a DMZ Workgroup in Stand Alone array.
2. Both servers have 3 NIC attached to them. (one has all public IPs configured, another one has internal IP address and the third one has Management IP which is used to connect the server via RDP).
3. There are more than 50 websites published via this standalone array.
I am very new to Forefront TMG technology and need to know the Topology used to create such environment.
Thanks
Lalit

Hi,
According to your description, you can use the 3-leg perimeter network template and choose which network adapter connects to the LAN, which network adapter connects to the external network and which network adapter connects to the DMZ.
Did you set up TCP/IP settings for the three NICs? If not, please refer to the link below:
Recommended Network Adapter Configuration for Forefront TMG Enterprise Edition Servers
More information:
Microsoft Forefront TMG – How to use TMG network templates (Note:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.)
Best regards,
Susie

How to identify the maximum data loads done for a particular day?

Hi all,
There is huge volume of data been loaded on a last monday, and then data was deleted from the cubes on the same day. And hence i needs to see which are all the cubes which was loaded wtih lot of records for a particular day,
i happened to look at rsmo, i am unable to see the ods nor the cube data loads,
were do i seet it?
Thanks

See if the table RSSELDONE helps. This will give you the recent data load details. Based on those loads , you can search the targets.
And also check table TBTCO which will give the latest job details. You will have to analyze the same jobs to know what loads were done . Give a selection for date.

How to identify the installed Weblogic Server and JDK are 32bit or 64bit?

Hi everyone,
I have a question ~
Both Weblogic Server and JAVA JDK are installed on the server already, but I only know the Weblogic Server is 10.3.4.0 and JAVA JDK version is 1.6.0_25.
I know the 64bit Weblogic Server installation file is a wlsXXXX_generic.jar package and 64bit JAVA JDK needed also.
But, since the Weblogic installed already, there are no such installation files on the Linux Server now.
I have tried the "java -version" for java version and check the Weblogic version from Weblogic console.
How to identify the installed Weblogic Server and JDK are 32bit or 64bit with Linux command? Or is there any way to check it?

What you can try to do is use WLST (or an MBean browser, such as JConsole or JRockit Mission Control) and connect to the adminserver.
For example when using WLST:
# set the environment by using setWLSEnv.sh (located in the ${WL_HOME}/server/bin directory).
# start WLST by using: java weblogic.WLST
# connect to the adminserver
connect('adminusername','adminpassword');
# change to the serverruntime environment
serverRuntime();
# show the attributes
ls();
# Here an attribute is shown called WebLogicVersion that shows the version of WebLogic
-r-- WeblogicVersion WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638
# Note that this does not show if is 32 bits or 64 bits to retrieve this information you have obtain the JVM version
# change the directory
cd('JVMRuntime/AdminServer');
# show the attributes
ls();
-r-- Version R28.0.1-21-133393-1.6.0_20-20100512-2126-linux-x86_64
# when you have something like x86 at the you are running a 32 bit version, if you have something like x86_64 you are running a 64 bits versionAs mentioned above you can also retrieve this information by using a MBean browser.

How can I erase my HD when I don't have the OSX Install Disc?

Hi --
I have an old eMac (yes, it's 20011 and I have an eMac) that I'm shipping away to be recycled. I want to erase the hard drive but don't have any of the original install discs. I've tried the disk utility option, but it greys out the selection menus so I can't select a drive to erase, and it also greys out the erase button, so it appears I'm unable to do it that way.
Any ideas?
Thanks!

Hi,
You may want to try a web search for a program called DBAN. Look for an earlier version for PowerPC. The download (an iso file) will allow you to burn a bootable disc.
Jan

How does the "Please Install Disc 2" message work?

I've been puttering around with an old Titanium PB G4 with a busted screen, using an external monitor to bring it up to 10.4 from 10.3.9.
I inadvertently started the install with a 10.4 CD instead of my 10.4 DVD. Problem is, I don't have the second 10.4 CD, so I had to abort the install (using a hard power reset) and reinstall with the DVD.
The DVD install went OK, but now on reboot I still get the "Please install Disc 2" message, and can't proceed. I can boot into OS9 and mess with the installed OSX files, but I can't seem to find out where that message originates from.
This is more from curiosity than just trying to fix it (I could always reformat and reinstall). My question is:
What file or mechanism causes the "Please Install Disc 2" to come up on the screen? Where is it located? Or is it something in PRAM? Just curious...
Thanks

One way would have been to be certain the first partial installation
had been wiped from the computer's hard disk drive. Even though
you seem to have gotten a second installation, whatever was hung
up in the first one is probably still on the computer's hard disk drive.
Disk Utility, on the installer disc's initial menu options, can be used
to reformat; it also can be used to secure overwrite zeros beforehand
so the hard disk drive has nothing other than the formatting. This is
as good as it gets for a blank-slate before a new installation.
There may be a way to see if a second full installation exists on the
hard disk drive, by holding down the Option key on boot and see if
you get the icon representation of more than one boot OSX system.
If so, try one of them and restart. Since you have two 10.4 systems
there, telling them apart may be by trial & error. If you can find the
correct one, it may be possible to remove the other one. It may be
that the last install by DVD won't work because its on the same drive
partition as the earlier failed OS installation.
If you tried an upgrade & install or an archive & install, the old 10.3.9
system may have the problem contained within it. Some of the OS X
system parts can be totally damaged by accessing (moving location)
of its bits; some of those are invisible while booted in OS X, not in 9.
That makes it possible to remove OS X, in a way, (and any older files)
while leaving OS 9.x intact. Any erasure of the HDD, and you will
have to install OS9 Drivers in the process of first new OS install if 9
is expected to boot the computer again. Tiger may provide drivers,
if not, a reinstall of OS9.2 should. Otherwise OS9 becomes a non-boot
version called Classic, accessed under OS X. If you have the original
software installation disc set, that is where OS9/Classic would probably
be installed from. Not all OS9 system discs work in Macs that shipped
with a vintage dual-boot hardware. A copy of that OS9 could be re-used.
If OS9 is desired; otherwise it may not exist in the computer later on.
Good luck & happy computing!
{ edited }

How to identify the right Install Disc Version for a specific mac model???

Similar Messages

Maybe you are looking for