How to identify the the cellphone compagny (Fido, AT

How to identify the cellphone compagny (At&t, telus, rogers ...) of an iphone 4 without a sim card?

Call Apple Support and give them the serial number of the phone.

Similar Messages

  • How to identify all the child tables referencing a master table

    Hi,
    How to identify all the child tables referencing a master table.
    Could you please help me...
    Thanks in advance...

    Hi!
    You may use this query:
    SELECT master.table_name, child.table_name
    FROM   user_constraints master, user_constraints child
    WHERE  master.table_name IN ('REGIONS')
      AND  master.constraint_name = child.r_constraint_name
    /yours sincerely
    Florian W.

  • HOW TO IDENTIFY WHILE THE CONNECTION IS DISCONNECTED?

    IN POP3 EMAIL CLIENT USING J2ME
    HOW TO IDENTIFY WHILE THE CONNECTION DISCONNECTED IN RUNNING APPLICATION.
    AND HOW TO EXIT, WHILE THE CONNECTION IS DISCONNECTED.
    THANKS IN ADVANCE
    edward

    WHEN YOU TRY TO USE THE CONNECTION THAT IS CLOSED, YOU'LL GET AN IOEXCEPTION. TO CHECK THIS, YOU'LL HAVE TO DO SOMETHING LIKE POLLING IF THE OTHER SIDE IS STILL LISTENING BY SENDING IT AN ACK MESSAGE AT SPECIFIC INTERVALS. IF YOU GET AN EXCEPTION, THE CONNECTION WAS CLOSED.

  • How to identify whether the data extracted is direct, queued, unserialized

    hi,
    how to identify whether the data extraction from r/3 is direct, queued and unseralized data.
    can anyone let me know abt it
    regds
    hari

    hI,
    Direct Delta: With this update mode, the extraction data is transferred with each document posting directly into the BW delta queue. In doing so, each document posting with delta extraction is posted for exactly one LUW in the respective BW delta queues.
    This update method is recommended for the following general criteria:
    a) A maximum of 10,000 document changes (creating, changing or deleting documents) are accrued between two delta extractions for the application in question. A (considerably) larger number of LUWs in the BW delta queue can result in terminations during extraction.
    b) With a future delta initialization, you can ensure that no documents are posted from the start of the recompilation run in R/3 until all delta-init requests have been successfully posted. This applies particularly if, for example, you want to include more organizational units such as another plant or sales organization in the extraction. Stopping the posting of documents always applies to the entire client.
    Queued Delta: With this update mode, the extraction data is collected for the affected application instead of being collected in an extraction queue, and can be transferred as usual with the V3 update by means of an updating collective run into the BW delta queue. In doing so, up to 10000 delta extractions of documents for an LUW are compressed for each DataSource into the BW delta queue, depending on the application.
    new queued delta
    This update method is recommended for the following general criteria:
    a) More than 10,000 document changes (creating, changing or deleting a documents) are performed each day for the application in question.
    b) In future delta initializations, you must reduce the posting-free phase to executing the recompilation run in R/3. The document postings should be included again when the delta Init requests are posted in BW. Of course, the conditions described above for the update collective run must be taken into account.
    Non-serialized V3 Update:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
    unserialized v3 update
    This update method is recommended for the following general criteria:
    a) Due to the design of the data targets in BW and for the particular application in question, it is irrelevant whether or not the extraction data is transferred to BW in exactly the same sequence in which the data was generated in R/3.
    take a look Roberto's weblog series
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    https://weblogs.sdn.sap.com/pub/wlg/126 [original link is broken] [original link is broken] [original link is broken]
    doc
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    and oss note 505700
    Re: delta methods
    go throuth the previous thread
    Delta types
    hope it helps..

  • How to identify all the information for a given company code?

    Hi,
    Our company provides data migration services for SAP and other ERP applications. Our customers provide us the specifications for extractions and conversions. We use one or more 3rd party tools to extract data from legacy systems into text/Excel files. Customers use LSMW to load generated files.
    We just got an unusual request. This customer wants to get ALL the data from SAP for a given company code and dump into Excel. They would do some manual editing on the data and load it into a new SAP client.
    In the past, customers would be more specific in their requirements. For example, they will mention Materials, Customers, Inventory, etc. In this case, the customer simply wants ALL the data for a given company code.
    Q1. Is everything in SAP related to company code, either directly or indirectly? For example, can materials be filtered by company code?
    Q2. The tools that we use let us extract data from SAP using SQL-like queries. How do I identify ALL the tables that I would need for a given company code?
    My feeling is the customer themselves are not clear on what they really want. Perhaps they are expecting us to guide them.
    I would appreciate any thoughts that you may have.
    If there is a more appropriate forum for this question, please let me know.
    Thank you in advance for your help.
    Regards,
    Peter

    hi
    t001w is the master table for plants, u can see all plants in this table.
    regads:
    rajesh.k

  • How to identify if the data is excel sheet is not on fixed column in SSIS package

    Hi, I am using SSIS 2008 R2 in which my excel file is the source for data. I am using the "Excel Source" transformation. For the normal data feed and all it is working fine.
    There is a requirement the data in the excel sheets are not static. For example think like, data may start from A1 Cell next it may be B1 or B2 and next time E1 or F2 like that. How to identify in which Cell the data is there to load to DB?
    Kindly tell me whatever the possibilites are there ....
    Sridhar

    Hi ,
      The mapping of SSIS packages cannot be modified at run time based on the input. Instead , you may consider to bring all the columns from excel into a staging table and figure out from where the data starts. Then load the destination table. If not
    you need to think of creating the ssis package itself dynamically using .Net code based on the excel metadata.
    Best Regards Sorna

  • ALV: OOPS: How to identify when the BACK button is hit?

    Hi All,
    I have a requirement in which when the BACK button on the ALV output is hit, i have to leave to the Original Selection Screen.
    I know that using SET SCREEN 0. this can be done. But i'm unable to find the point at which the Event about the BACK button is triggered.
    How can i identify if the button hit was the back button?
    Thanks in advance,
    Jr.

    Hi Jr,
    u declare sy-ucomm in data decla.
    in code try this out.
    Case sy-ucomm.
    when 'BACK'.
    leave to screen#. " # For the selection screen (i dnt think it is 0).
    u obviously have to set the PF status for the same by SE41 and in Aplication, u give name as BACK for the back symbol.
    I hope is will help.
    Reward if useful
    Thanks
    Sujay

  • How to identify that the call to a BAdI is coming from SAPGUI

    Hi All,
    In the current project involving SAPCRM 5.0 (both GUI and PCUI), we need to display a pop-up asking the user whether he would like to go ahead with the changes in both GUI and PCUI.
    The function module 'Popup-to-confirm'  was used in a BAdI implementation and it worked fine in GUI but caused problems in PCUI. So this code was commented out as of now.
    Could you let me know as to how should we differentiate the call being placed to a BAdI is from GUI or from PCUI so that we could ensure that the pop-up gets displaced in GUI atleast as of now and does not get populated/cause errors in PCUI as of now?
    Else please let me know what is the correct way of displaying a pop-up in both GUI and PCUI in CRM 5.0?
    Thanks,
    Ravi Kiran

    Hello All,
    I am moving this to another forum as I accidentally put it in this category.
    Thanks,
    Ravi Kiran

  • How to identify if the COBOL ran successfully from app engine?

    I have scheduled a COBOL process from App Engine. Once it ran successfully, i need to start another process. How to accomplish this in App engine peoplecode? Is there any flag updated on the successfull run of the cobol process? How to handle when the cobol did not run successfully?

    Refer to PeopleBooks
    http://peoplebooks.cognizant.com/PSOL/PT848/eng/psbooks/tpcl/chapter.htm?File=tpcl/htm/tpcl02.htm%23H4529
    Sample code from PBooks Pasted below
    Rem Set the return code so we are sure it is sent back.
    &Returncode = -1;
    Rem Set the parameters that will be sent across.
    &param1 = "John";
    &param2 = "Smith";
    Rem Set the standard parameters that indicate program name and run-control.
    &RemoteCobolPgm = "CBLPROG1";
    /* call the remote function */
    RemoteCall ("PSRCCBL",
    "PSCOBOLPROG", &RemoteCobolPgm,
    "PSRUNCTL", workrec.runctl,
    "FirstName", &param1,
    "LastName", &param2,
    "Returncode", &Returncode,
    "MessageSet", &msgset,
    "MessageID", &msgid,
    "MessageText1", &msgtext1,
    "MessageText2", &msgtext2);
    if &Returncode <> 0
    WinMessage(MsgGet(&msgset, &msgid, "default message", &msgtext1, &msgtext2));
    end-if;

  • How to identify the iphone compagny (Fido, Telus, AT

    How to identify the iphone 4 compagny (fido, telus, rogers, AT&T ....) without sim card inside

    Call AppleCare and give them the model and serial number.

  • I have activated the standard datasource in r/3? how to identify active?

    Hi All,
    i have activated the standard datasource in r/3 ? and i have replicated the same in the bw system and in the source system of r/3 i have replicated it and i can find the data source there ? but how to identify whether the datasource is active in the bw system or not ?
    i cant see a tick mark on the data source does it determine it is active?
    Pls guide me on this?
    thanks
    Pooja

    Hi all,
    I am working on 3.5
    And where can i find the datasource is green or not? it is not assigned to the source system i can identify it?
    i am not able to rightclik on the datasource and see the active version.
    When i right click on the data source i can see this option:
    1. assign infosource
    2. maintain datasource in the source system etc?
    Thanks
    Pooja

  • Identify if the installation is Enterprise or Standard

    How to identify if the installation is of Enterprise or Standard in Oracle 9i?
    SQL> SElect * from product_component_version ;
    PRODUCT VERSION
    STATUS
    NLSRTL 9.2.0.3.0
    Production
    Oracle9i 9.2.0.3.0
    Production
    PL/SQL 9.2.0.3.0
    Production
    TNS for 32-bit Windows: 9.2.0.3.0
    Production
    SQL> SElect * from v$version ;
    BANNER
    Oracle9i Release 9.2.0.3.0 - Production
    PL/SQL Release 9.2.0.3.0 - Production
    CORE 9.2.0.3.0 Production
    TNS for 32-bit Windows: Version 9.2.0.3.0 - Production
    NLSRTL Version 9.2.0.3.0 - Production

    SQL> select * from v$version;
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE    11.2.0.1.0      Production
    TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    SQL>
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Release 10.2.0.1.0 - Production
    PL/SQL Release 10.2.0.1.0 - Production
    CORE    10.2.0.1.0      Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    SQL>

  • Need query to identify all the alert mail programs

    Hello all,
    How to identify all the alert mail programs which sends only attachment.
    Please help me in this regard.
    Regards,
    Kiran

    Hi,
    Did you try eTRM website? Search for ALR, and you should get the Alert link, and browse the ALR tables.
    Regards,
    Hussein

  • How to identify a rehire candidate?

    Hi,
    Please let us know if you have worked on the following:
    1) How can we identify in e-recruiting that an external candidate was a previous employee of the company at some point in time? OR how to identify that the candidate had a record in SAP PA in the company?
    2) what exactly is the difference between the "deleting external candidate" and " delete external candidate registration" ? is it only that the "delete external cand registration" first closes all the open applications/assignments to requisition and then deletes the details? or some more differerences are there?
    Also can you provide more information on "Store Legal Periods"? Can we define these periods based on some other criteria apart from Country/city criteria? if so how?
    Thanks,

    1) How can we identify in e-recruiting that an external candidate was a previous employee of the company at some point in time? OR how to identify that the candidate had a record in SAP PA in the company?
    You can identify in R/3 in INFOTYPE 0001 go to over view you will find all information of employee history
    2) what exactly is the difference between the "deleting external candidate" and " delete external candidate registration" ? is it only that the "delete external cand registration" first closes all the open applications/assignments to requisition and then deletes the details? or some more differerences are there?
    I belive both are one and same please what expert will say
    Best Regards

  • How to Identify an whether an Sales order is created through EDI Idoc

    Hi all,
    By seeing an Sales Order, How to identify whether the sales order is created through EDI Idoc or by other source.
    Thanks in advance
    Regards
    Chakri

    Hello Chakri,
    As far as I know, for EDI orders a separate order type is created. So, they use to that create the order with an Idoc.
    But, remember you can use other order types as well.
    Thanks,
    Babu Kilari

Maybe you are looking for