How to identify userexits include program which can be modified

hi frndz,
plz don't give me the program which is circulating in forum bcoz i kno tht progm it gives the userexit and BADI but i want to get the include programs for eg:MV45FZZ for VA01 tcode....how to get the include programs like this for other tcodes.
i think this include progm is to validate the fields in VA01....like this how to validate the fields of other tcodes or screens.
Thanks.
Points will be rewarded for rgt ans.
Arunprasad.P

Hello,
as the real world is - there are very different types of 'userexits' inside SAP.
These programs identifing SMOD-Exits and BADI's are quite helpful, but they won't find any old exit's
like the MV45AFZZ.
I don't know a program which could do that - it would have to scan programs for subroutines maned 'userexit'. But this logic is the oldest logic existing from release 3.0 (or older ??). And (i think) only in SD-related programs. In that area you find the exit's via transaction SPRO -> Sales and Distribution -> system modification.
Regards Wolfgang

Similar Messages

Programs which can trigger GLPCA table entries

Hi SAP Community,
I am looking for a complete list of programs which can trigger GLPCA table entries. I am currently in the process of running related transactions manually, but to be on the save side, I would really appreciate the feedback from you guys.
Thanks in advance for your support.
Cheers,
Chris

Hi,
You can find the programs where the table GLPCA is being used. For this use transaction code SE11 and enter the table name GLPCA and click on the icon where used. A pop up window will be displayed and you can click on Programs only. This will display all the Programs where the table GLPCA is used including any Z programs developed in your system.
Thanks
Murali.

Regarding the userexits Include program

hi frndz,
plz don't give me the program which is circulating in forum bcoz i kno tht progm it gives the userexit and BADI but i want to get the include programs for eg:MV45FZZ for VA01 tcode....how to get the include programs like this for other tcodes.
i think this include progm is to validate the fields in VA01....like this how to validate the fields of other tcodes or screens.
Thanks.
Points will be rewarded for rgt ans.
Arunprasad.P

hi frndz,
plz don't give me the program which is circulating in forum bcoz i kno tht progm it gives the userexit and BADI but i want to get the include programs for eg:MV45FZZ for VA01 tcode....how to get the include programs like this for other tcodes.
i think this include progm is to validate the fields in VA01....like this how to validate the fields of other tcodes or screens.
Thanks.
Points will be rewarded for rgt ans.
Arunprasad.P

How to create a Z* table which can maintain through SM30?

How to create a Z* table which can maintain through SM30? Thanks!

This question had been asked millions of times...you just need to search the forums...
Quick hint...goto SE11...the utilities menu and then Table Maintenance Generator.
Greetings,
Blag.

How to identify/Highlight Idoc segment which is in error

Hi All,
We want that when the user looks at the IDoc which is in error, he should be able to find out the segment which is in arror. How to identify/Highlight Idoc segment which is in error.
Prashant

Hi kunyare,
If you are receiving errors when trying to restore your iPad from Recovery Mode, you may find the following article helpful:
Apple Support: Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Regards,
- Brenden

How do I know what programs I can quit in the activity monitor?

I use a macbook 13in and run lion. Last night, I checked out the actiivty monitor and there were programs/files(?) I didn't recognize. I understand that some of these are important and quitting them may cause problems. How do I know what programs I can quit? Thanks for the help!

HellO:
IMHO, you should not quit anything. In fact, looking at the activity monitor if nothing is wrong is, IMHO, a waste of time.
Barry

Any other programs which can run Skype?

Any other programs which can run Skype?
as my skype doesnt work becasue my OlePro32.dll files are corrupted?

TS1717 as noted in the thread title...
Brigancook, is the library database on the external or just the media? iTunes reevaluates smart playlists and rewrites its database after every action on the library. I've found this can make a library half that size, with a lot of smart playlists, quite sluggish. That said I'm aware part of my problem is aging hardware. Having the database on the internal drive may improve performance if it is currently on the external.
I'd expect to see an exponential relationship between size and response time which may explain what you see. Cutting down on the number of smart playlists might help. If we're really lucky the long awaited iTunes 11 might have streamlined some of the background processes as well as cleaning up the front end.
tt2

Find all Z programs which are being modified in last month

hii all,
I want to find all Z programs which are being modified in last months.Is this possible??.is there any standard or z-program which can give me the detail of all Z-program which are modified.
It is possible if i get last month Request but suppose if there are more than 100 request per month then it is not possible to go through each individual Request and find Z-programs.
Waiting for ur reply.
<removed_by_moderator> ... read [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]!
Thaking You.
Edited by: Julius Bussche on Jul 17, 2008 7:16 PM

Hello
REPORT ZCHPROG.
TABLES: D010SINF.
DATA: PROGTXT(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: PROGTXT1(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA:
   BEGIN OF MT OCCURS 0,
PROG LIKE D010SINF-PROG,
EDTX LIKE D010SINF-EDTX,
R3STATE LIKE D010SINF-R3STATE,
UNAM LIKE D010SINF-UNAM,
CNAM LIKE D010SINF-CNAM,
UDAT LIKE D010SINF-UDAT,
UTIME LIKE D010SINF-UTIME,
END OF MT,
N(4),
PROG(20) TYPE C,
MIN(10) TYPE C.
RANGES: UDAT1 FOR D010SINF-UDAT.
RANGES: UTIME1 FOR D010SINF-UTIME.
SELECT-OPTIONS: PROG1 FOR D010SINF-PROG,      "
                UNAM1 FOR D010SINF-UNAM,      "
                CNAM1 FOR D010SINF-CNAM.      "
PARAMETERS DEN(4) TYPE C DEFAULT '1'.
PARAMETERS SEC(5) TYPE C DEFAULT '30'.
PARAMETERS DOP AS CHECKBOX DEFAULT ' '.
START-OF-SELECTION.
IF DOP NE SPACE.
MIN = SEC * 60.
      UTIME1-SIGN = 'I'.
      UTIME1-OPTION = 'BT'.
      UTIME1-LOW = SY-UZEIT - MIN.
      UTIME1-HIGH = SY-UZEIT.
   APPEND UTIME1.
ENDIF.
      UDAT1-SIGN = 'I'.
      UDAT1-OPTION = 'BT'.
      UDAT1-LOW = SY-DATUM - DEN.
      UDAT1-HIGH = SY-DATUM.
   APPEND UDAT1.
SELECT PROG UNAM UDAT UTIME R3STATE EDTX CNAM
INTO (MT-PROG, MT-UNAM, MT-UDAT, MT-UTIME, MT-R3STATE, MT-EDTX,MT-CNAM )
         FROM D010SINF WHERE PROG IN PROG1
                                     AND UDAT IN UDAT1
                                     AND UTIME IN UTIME1
                                     AND CNAM IN CNAM1
                                     AND UNAM IN UNAM1.
APPEND MT.
ENDSELECT.
N = 1.
WRITE: / 'from', UDAT1-LOW, 'to', UDAT1-HIGH.
SORT MT BY UNAM UDAT UTIME.
LOOP AT MT.
WRITE: / MT-CNAM,MT-PROG,MT-UNAM,MT-UDAT, MT-UTIME,
MT-R3STATE, MT-EDTX.
N = N + 1.
ENDLOOP.
WRITE: / N.

How to make a java program, that can be used by c++ application

I'm developing a Java web application (WEBapp), but I have also a c++ program.
C++ program must use WEBapp method to communicate on the web.
How to make a Java public function that accept value, elaborate, then return the resul to c++ application?

jschell wrote:
You have C code.
You have Java code.
The two must communicate.I have a c++ program, and a Java program.
C++ program wants to communicate on the web (send text), and I'm trying to add this functionality to it creating a Java program.
NOW THE PROBLEM? How c++ program can use java-program (in local) to send data on the web?
You can just JNI to communicate either from java to C++ or from C++ to java. That is direct communication in that there is a single process involved. Thus you will no longer have a java application and a C++ application but rather a single application.I don't know JNI, i found http://java.sun.com/docs/books/jni/ and I think is too difficult to implement?
You can use files or sockets to communicate. Using sockets allows for any number of additional protocols including the previously mentioned web services. Those methodologies would allow more than one application to exist.I developed yesterday a java-side-interface using socket (in local host 127.0.0.1). So the c++ program must write or read to/from the socket to comunicate to java (then the java program send data on the web).
Finally it might be the case that you have a C++ application which you cannot modify. In that case then you MUST use whatever input/output mechanism that it supports. There is no choice. And until you have fully determined what those mechanisms are it is pointless to discuss a solution.I can modify the application, but I don't have developed it. The c++ application use a third-part dll (taken from SKYPE) to comunicate on the web: I have to remove the dipendence from this dll, and add the java program: java program must substitute the dll. It must be non-invasive to the c++ program. DLL calls can be "send(data)" or "receive(data)" or similar.
For this do you think that JNI is a must, or I can use soket on local host?

HT2509 Despite what this article states, Apple support told me not to try to remove any fonts as it could cause other possibly serious problems. Is there a program which can be safely installed which will keep at the top of the font list those fonts whic

An article in the New York Times yesterday told how to remove unwanted fonts from the Font Book. I followed its instructions (the same as those on the webpage "support.apple.com/kb/ht2509") and was NOT successful in removing fonts. Despite what the newspaper article and the web page stated, my attempts to remove fonts were unsuccessful. I use perhaps 15-20 of the hundreds and hundreds of fonts, and deleting those I don't use would make choosing a font a lot faster. I called support and was told not to try to remove any fonts which I myself had not added to the list(I have not added any) as doing so could cause significant problems elsewhere. The support tech suggested that there might be independent software programs which would keep at the top of the list those fonts I have used, which sure would speed up the process of selecting a font. Anyone know of such a program, or how to safely alter the font list Thanks.

I just spoke again to tech support and this time an answer was provided that works! Choose the font you want to use, drag it to the left, and a new "unnamed" folder will appear. Continue to drag into that folder fonts you want to use. You can click onto that folder to change its name. Then when using font book merely click on that folder to open it and select the font wanted. This tech rep also confirmed that you should NOT try to delete individual fonts as they are part of the basic operating system; he did confirm that the apple web page in parentheses above says otherwise, and will refer that to higher ups to see about removing or modifying that page.

How to find out in program which all classes have implemented an interface

Hello,
I have created an interface and few classes are implementing the interface.
I want to know in a program which all class have implemented the interface.
Is it possible to find it out and how?
Regards,
Bikash.

Hi Bikash,
Read the Database view VSEOIMPLEM with where condition REFCLSNAME = Interface Name and version = 1.
This would give you all the classes which have implemented the interface and are active...
If you want to look at the values that the field version can have then see Type Group SEOC ans search for version....
Hope this help...
Regards,
Sitakant

How to call a unix program which is IRIX OS from java

Hi,
I have a program on UNIX platform and OS is IRIX. I have a java program on WINDOWS machine. I want to run that program, which is on UNIX paltform from java. I know the path but I am not able to give that path using Runtime.exec() command.I can run any file on the WINDOWS machine using my JAVA program. Can anybody help me ???

I am not really sure if I understood your problem, but it might have something to do with forgetting to set the LD_LIBRARY_PATH.
Set this path according to your needed paths and maybe this already solved your problems.
Greetings,
John

How to create a function/procedure which can take optional parameter?

Hi,
I want to create a function or a procedure which can take optional parameters. For example, I want to create fun1() or fun1(param1) like this. Only one function will act differently when different number of parameters are passed to it. Something like the substr() function in oracle. It can be called with 2 parameters, as well as three parameters.
Thanks in advance,
Kiran

There are two ways of doing this. The regular way would be to add a DEFAULT clause to your function declaration:
-- Function can be called with 1 or 2 parameters
FUNCTION xxxx
    ( param_one NUMBER
    , param_two VARCHAR2 DEFAULT NULL )
RETURN VARCHAR2;Or, if your functions are declared in a package you can do some over-loading:
PACKAGE yyyy
IS
    -- Function with 1 parameter
    FUNCTION xxxx
      ( param_one NUMBER )
    RETURN VARCHAR2;
    -- Function with 2 parameters
    FUNCTION xxxx
      ( param_one NUMBER
      , param_two VARCHAR2 )
    RETURN VARCHAR2;
END;If you are calling server-side functions from client-side tools (like OracleForms) you may need to use this second method.

How to create a program which can be installed as NT service?

I wrote a server program using LW/CVI 5.5. I want to install it on NT/2000
OS and running as NT/2000 services. I know SRVANY.EXE can do this, but I
want to one step do this using INSTSRV.EXE or using install utility to modify
registry keys.
Thanks.

Hi
Thanks for your fast replies.. I have created a new material and was able to create inventory thru MB1C. But I was not able to generate a goods delivery(VL01N) and billing document(VF01) for the sales order.
Error: No schedule lines due for delivery up to the selected date
Message no. VL248
Diagnosis
There are no schedule lines due for the given order item up to the date chosen.
System Response
The system does not create a delivery item for this order item.
Procedure
Check whether the order item to be delivered contains confirmed schedule lines.
If this is the case, set the selection date further into the future if you still want to create a delivery for this item.
Please suggest,
Tanks,
Suma
Edited by: Suma B on Sep 23, 2008 3:55 PM

How to delete song on iPhone which can't be wiped?

Hi there,
after about one full day of fighting with iTunes Match (including full deletion of iCould Library by using an empty iTunes Library), I finally have a working iCloud Library with all my songs and artwork (tested in my iPhone 4S). Unfortunately, there is one single problem left which i can't solve.
In one album, there is one single song (out of 9) which is shown twice on my iPhone. It's only shown once in my iTunes Library on the iMac.
I can't delete the 2nd version of this song on my iPhone. It shows the cloud symbol and when i click it, it shows the download symbol but it actually doesn't download. It returns to the cloud symbol. The wipe function to delete this song is not available for this song. And the song doesn't play.
All the other files in this album are fine. If i delete the whole album in my iTunes Library on my iMac and update iTunes Match, all songs are deleted from my iPhone except the one which I can't delete.
It's obvious a corrupt song but how do i get rid of it?
Thanks,
Tom

I am not familiar with a song being greyed out, but with a song that is appearing normally, you can swipe a finger over it from left to right. The red "Delete" button should appear. Just press it and the song should delete. The process is similar to deleting an email. Hope this works with your greyed out song.

How to identify userexits include program which can be modified

Similar Messages

Maybe you are looking for