How to identify WBS elements with AuC status

Hello Experts,
We had earlier developed a report which determines whether the entered project id can be set to CLSD status or not. The problem arises with few WBS elements which have AuC statuses. The report is displaying them as closeable but we fail to close them through CJ20N. The problem is that the program captures the status of some projects as TECO but these projects have WBS elements which have statuses like "TECO BUDG AUC  SETCu201D because of which the system doesnu2019t allow CJ20N to close it. So can any one help me suggest any means by which we can detect whether any of a projects WBS elements are in the AUC status?
Regards,
Uday

Hi Virendra,
Thanks a lot for your inputs. I was trying to go through the tables in detail before I again get back to you about anything. From TJ02 I got to know that I0163 is the status code for Asset in construction costs. So I obtained the OBJNR values of all my WBS elements and I went through all the 3 tables TJ02, JCDS & JSTO that you had suggested. The data in JEST for 1 of the OBJNR values contained this I0163 value in 1 row. I wasn't however sure as to which particular status we could consider for the WBS from among the list. Is it something like the last row of the table would be the current status of the element & that all the other statuses just point to the various history of changes that it went through? (Am mailing you a copy of the same thread so that you would get the data displayed in a proper tabular format.)
Regards,
Uday
MANDT   OBJNR              STAT    INACT    CHGNR
  400         PR00304257       I0001      X           002  
  400         PR00304257       I0002      X           004  
  400         PR00304257       I0005      X           001  
  400         PR00304257       I0028                   001  
  400         PR00304257       I0045                   003  
  400         PR00304257       I0064      X           002  
  400         PR00304257       I0067                   001  
  400         PR00304257       I0163                   001

Similar Messages

  • RA for WBS element showing RESA Status

    Hi PS experts!
    I am new to SAP and have a doubt.
    I want to know whether Result analysis (KKA2 or KKAJ) can be successfully done for a WBS element having RESA status.
    We use WBS elements to book and post Time (as per project requirement). And so, if I book and post Time on a WBS element which already has RESA status, and then try to do RA (KKA2 or KKAJ), will the RA be successful?
    Please help.
    Thanks,
    Vinitha.

    Thanks for that info.
    I had this doubt because I was booking and posting Time on a WBS element (with RESA status) and yet, when I do KKA2, it shows no data; i.e. no WIP or COS. Do you know why this could happen? Why is that the WBS element shows no WIP or COS?
    Please help.
    Vinitha.

  • How to activate WBS Element in Sales Order

    Dear All,
    How to activate WBS element in sales order?
    Thanks & Regards,
    PM

    Basically in case of Repair and overhaul material is taking inside for repair purpose..for that we create service order in which we r creating component, operation(time. labor, machine) besides we create notification to allow overhead activity for this special activity..
    once this service order r created and notification is set.. we r estimating cost for this process and updating sales price(DP82) which further send to customer for approval.. once v receive approval v issue a goods along with parental serviceable material to Plant for Plant maintenance estimation..
    so all this procedure obey just like project , in this case we have to assign WBS element into sales order level..
    WBS elemet is nothing simply its hierarchy which shows what r the steps followed in project(CJ20N)..
    Correct me if i m wrong..
    thanks
    Mk

  • How to lock wbs element

    Hi all,
    I would like to seek your help on how to lock wbs element in a report program. Is there any bapi or function module for that? The requirement is to lock the wbs element when the user process/run that particular WBS. If the user exit to the report program, then that is the time that the other user can be able to process the WBS.
    Please help. Thanks in advance.

    There is no BAPI or function module to lock on unlock a WBS element.Goto Tansaction CJ02,put in the WBS element and repsetive project.
    in CJ02, go to EDIT->STATUS->LOCK/UNLOCK.
    Hope this clarifies your query.
    Regards,
    teja

  • How to find WBS element total asset value

    hello all,
    i have a requirement like this..
    i have displayed profit center wise PM orders  with total actual cost.....
    similarly i have another report where i need to display profit center wise WBS elements with total asset value....
    from which table do i need to take this total asset value ,how do i link this table with PRPS table...
    thanks in advance....

    hello all,
    i have a requirement like this..
    i have displayed profit center wise PM orders  with total actual cost.....
    similarly i have another report where i need to display profit center wise WBS elements with total asset value....
    from which table do i need to take this total asset value ,how do i link this table with PRPS table...
    thanks in advance....

  • Had Photoshop Elements 12 on my other Mac that recently got smashed, new one has no CD drive. How do I install Elements with my product key? Purchasing an external CD drive is not an option at this time after forking over the 2500 for the new Mac...

    Had Photoshop Elements 12 on my other Mac that recently got smashed, new one has no CD drive. How do I install Elements with my product key? Purchasing an external CD drive is not an option at this time after forking over the 2500 for the new Mac...

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How to show catalog items with Approval Status:Pending in a Content Search Webpart

    How to show catalog items with Approval Status:Pending in a Content Search Webpart using cross site publishing. Thanks in advance.

    I don't think you're going to be able to. Usually Approval Status is used in conjunction with Major/Minor versioning and while Approval Status is pending the item is usually a draft.
    As a result the search crawler should not be able to see the draft items as it would not have the necessary rights to do so. (Good practice ensures that the Search Crawler has only read access and is not an elevated account for this reason)
    Paul.
    Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

  • Project setup, WBS element mgmt, user status, settlement

    What is Project setup, WBS element mgmt, user status and settlement

    If you are after the definitions, the simplest way would be to go to SAP Help.
    If you're after the transaction code, it's CJ20N which is the Project Builder screen.

  • WBS settlement with AUC

    Hello,
    Can anybody help to do the configuration for wbs settlement with AUC other than below mentioned configuration.
    1. New Asset class creation with line iteme settlement.
    2. Allocaiton structure added settlement with FXA.
    3. New settlement profile created with default object type FXA,document type AA and amount settlement check box activated.
    but based on above mentioned configuration i am not moving forward, kindly suggest any more configuration need for this requirement.
    Thanks for your advance help.
    Regards,
    Lakshmi.

    Hi Lakshmi,
    There are quite a few settings to be maintained. I do not remember exact sequence of steps but here are a few pointers.
    1. Investment profile needs to be created with 'line item settlement'
    2. AUC asset class to be created and assigned to this investment profile
    3. Investment profile to be linked to project profile.
    4. Source structure to be assigned to investment profile
    There may be other steps I am missing but I hope these help.
    Also, if you mention any error that you are facing or at which point you are getting stuck, it would be helpful.
    Regards

  • How to make WBS element field in Notification a mandatory.

    How to make WBS element field in Notification a mandatory.
    Should I use USer Exit.
    In cutomization I didnt find ant standard customization

    Hi,
         If it is about WBS element field in Maintenance Order then check up user exit ;- IWO10009 PM Order: Customer Check for 'Save' Event
    For Notification i am not sure whether this field is ther , but anything u can perform checkings via 
    QQMA0014 QM/PM/SM: Checks before saving a notification
    Alternatively u can also explore via Transaction variant SHD0 ..
    regards
    pushpa

  • Projects/WBS elements with the editing mask A still exist.

    Hi All,
    I am trying to create a New Coding Mask with Project ID "A" in Dev client 100. ( Ex: A.0000.XX)
    But System is giving an error says that"There are still projects or WBS elements with edit mask A in the system. Therefore you cannot change them".
    But there is no WBS or PD's with this coding mask existing in development client 100.What to do?Is there anyone faced this problam earlier?Any refresh activity required for this?
    Thanks in Advance!
    Thanks
    Suresh Kumar.

    Hello,
    You need to check whether there are any projects in the system starting with "A" using CNS41.  If at all there are any project existing in the system which starts with "A" then the system wont allow to create coding mask which starts with "A"
    You can try to delete these project if possible and then try out if the system allows you to create the coding mask.
    Thanks and Regards,
    Anish

  • How to Change WBS Element Status Profile

    Dear PS Experts,
    Once Status profile is set for WBS element, system is not allowing to change the same.
    What should I do to change the status profile?
    Moreover I will like to know the Table details in which Status profile details are kept for a WBS Element.
    Thanking you all.

    Hi,
    You can change the status profile on 'Control' tab of Project Definition. But this change will be effective for new WBS elements. I dont think you can change status profile for existing WBS. You will have to delete and re-create them.
    Status proflie for WBS is stored in JSTO table. Get OBJNR for WBS from PRPS table and insert in JSTO table to get status profile.
    Regards
    Shrikant

  • WBS Elements - Cannot change status

    Hi Guys,
    When we are trying to change the status of a WBS element to " CLSD " , it is giving us the following error message
    " There are still open down payments for WBS XXXXXX ".
    Please advise as to how these down payments for the WBS be tracked and cleared.
    Our intention is to change the status of the WBS to " CLSD ".
    Thanks..
    Kris...

    Please check below reports
    S_ALR_87100191 - Receipts/Expenditures in Fiscal Year
    S_ALR_87013575 - Receipts
    S_ALR_87013574 - Expenses
    S_ALR_87013573 - Receipts/Expenditures for all Fiscal Years
    With Regards
    Nitin P.

  • How to keep wbs element  field in display mode in me22n?

    Hi all,
    Can somebody please guide me how i can keep wbs element field available at account assignment Tab at item level in transaction me22n as display mode?

    Hi Dhruv,
    You can implement BADI ME_PROCESS_PO_CUST  and implement the method FIELDSELECTION_ITEM.
    I have pasted the SAP documentation available below. Please try this.
    Field selection (FIELDSELECTION_HEADER_REFKEYS, FIELDSELECTION_ITEM_REFKEYS, FIELDSELECTION_HEADER, FIELDSELECTION_ITEM methods)
    In the following methods, you can change the display properties of fields by supplementing or switching the field selection reference keys:
    At header level FIELDSELECTION_HEADER_REFKEYS
    Documentation for BAdI method FIELDSELECTION_HEADER_REFKEYS
    At item level FIELDSELECTION_ITEM_REFKEYS
    Documentation for BAdI method FIELDSELECTION_ITEM_REFKEYS
    You can implement special rules using the methods FIELDSELECTION_HEADER (at header level) and FIELDSELECTION_ITEM (at item level).
    Documentation for BAdI method FIELDSELECTION_HEADER
    Documentation for BAdI method FIELDSELECTION_ITEM
    Special Field Selection Item
    Functionality
    The FIELDSELECTION_ITEM method enables you to influence the field selection properties for a field.
    Parameters
    The following parameters are available:
    IM_HEADER - Document header
    The interface reference is of the type IF_PURCHASE_ORDER_MM.
    IM_ITEM - Document item
    The interface reference is of the type IF_PURCHASE_ORDER_ITEM_MM.
    CH_FIELDSELECTION - Fiele selection table
    By making changes to this table, you can influence the display properties of a field.
    This table consists of value pairs <METAFIELD|FIELDSTATUS>.
    The Metafield represents a business content (e.g. the PO quantity). Thus, for example, the database field EKPO-MENGE is linked to a certain metafield value just like the field MEPO1211-MENGE on the item overview screen in the purchase order.
    Through this abstraction, reference can be made to business contents on a uniform basis.
    Standard metafields are defined in the type group MMMFD.
    The field selection status has four possible instances:
    '-' Field is suppressed
    '*' Field is purely a display field
    '.' Input field
    '+' Mandatory field
    Notes
    Under no circumstances make any changes to the database within this method. On no account use Commits.
    For WBS element the meta filed no is 512.
    mmmfd_wbs_element     TYPE mmpur_metafield VALUE 512.
    In IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM method you can write the code as follows:
    field-SYMBOLS : <FIELDSEL> like line of ch_fieldselection.
    DATA: l_persistent TYPE mmpur_bool.
    l_persistent = im_ITEM->is_persistent( ).
    READ TABLE ch_fieldselection ASSIGNING <FIELDSEL> WITH TABLE KEY metafield = '512'.
    IF sy-subrc IS INITIAL.
      <FIELDSEL>-fieldstatus = '*'. " Field is purely a display field
    ENDIF.
    Try this, it should work.
    Regards,
    Savitha
    Edited by: Savitha Madhavagiri on Jan 8, 2010 4:20 AM

  • How to populate WBS element and Project definition in Additional Tab

    Hi,
    I have a 2 requirements
    1) we need to populate WBS element and Project definition of an order in PM
    IW 32 trasnaction (Additional data tab).
    2)Also i need to program settlement rules in CJ02 for WBS elements .
    How do i approach ?  when i do manually it is taking the values in IW 32 when the status is released.
    So i think first we need to chnage the Status from Created to released and then start working on step 1 and Step 2
    Kindly suggest.
    Thanks,
    Pradeep.

    Problem one solved ......
    Basically we need to put the status of WBS elememnts and then write a BDC for additional data tab.
    Looking into issue 2......

Maybe you are looking for