How to identify what apps are on disc

I already closed my other thread about G5 discs and unidentified Tiger disc.
I have discs 1 and 2 belonging to 2Z603-5439 set.
Disc 1 is a 2Z691-5025-A Ver. 1 for a Power Mac G5...nothing on grey label denotes what is in software bundle.
Does this disc work on any PPC G5? and does software bundle include iMovie, GarageBand, etc????
Need help asap

Thanks BDAqua
As Klaus wrote in replies to my other post I definitely got stabbed on this one.
"Lost" my Tiger retail disc so went looking for replacement...very hard to find
Found this supposedly full set on ebay, then found out it was for G5, but ad appeared to refer to ANY G5.
Of course not all the same, but Black retail disc will install on ANY PPC. I knew this and thought this came with one. Picture showed that disc, but what I ended up with is probably a seller labeled 10.4.6 upgrade disc in the set. This is only disc that looks likeit would install that version of Tiger. I tried it up to options page, indicating it would install the OS. Upgrade wouldn't act like that, so therefore this disc is definitely a copy of Tiger retail disc, but with "homemade" label
Thanks for the help......If I intended to buy a G5 someday I probably would get a 1.6 or 1.8 Mhz Single Processor one.Of course that isn't full blown but alot better than what I now have.

Similar Messages

Does anyone know how to see what apps are still open on lion? On snow leopard you just had to slide three fingers side ways I believe thanks

Anyone know how to see what apps are still open on lion?

If you do not have the light in dock active, activate it, or slide three finger up to open Mission Control or in Force qQuit all open programs are listed (even the hidden ones).
Hope that helps..

How to identify what queries are embeded in workbook in bi 7?

Hi all,
How to identify what are all the queries are used in the workbook in Bi 7?
can anyone help me on this!!
Thanks
pooja

Hi,
Please check the table RSRWORKBOOK. Enter the name of the work book, it will give you the GENUID of the query. Pass these values to table RSRREPDIR. You will get the names of the queries.
- Jaimin

I couldn't update os in ipad1,how to know what apps are supported in os5

HOw to know what apps supported by iPad 1

Try this link to find apps whose current version is compatible with iOS 5.1.1 and below : https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices#5.1.1
Some developers allow you to download older compatible versions of their apps, so if it's an app is free you could try downloading the current version on your computer's iTunes and see if you can then download a previous compatible version via the Purchased tab in the App Store app on your iPad : Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support . If the app is paid-for then contact the developer first and see if that will work, don't buy it and then find that it doesn't

How to tell what apps are "running" in multitasking pane?

My understanding of how the ipad works is that when one presses the home button, the open app closes. However, when multitasking using the bar, how does one determine which apps are actively running versus which apps are simply displayed as part of the recently used apps list? I often have multiple safari windows plus a few apps open at one time. (I know I can view the safari windows by hitting the "windows" icon on the menu bar.
I'd like to be able to conserve battery life by killing background apps when necessary. But there is no "task pane" to see what's open at any given time.
Any help appreciated,
Message was edited by: keyboardoperator

JimHdk wrote:
No, when one presses the home button the open app does not necessarily close if it is capable of multitasking (for example Pandors radio).
The recent apps bar is really for selecting among recent apps. That is to say it is a way to switch between apps without having to go to the app screens to find the app.
Note only a subset of apps are actually capable of multitasking and these are rather obvious when they are running. There is an indicator to the left of the battery level indicator which indicates this (>).
Let me give an example. I just opened an app called My First Puzzle Toys. From the app home screen there is no close or exit option. With the app open, if I touch the home button on the bottom of the bezel, does this close it? Or is it still running? Similarly, if I double click the home button and choose Safari from the list, are both then running? Another example: I just double clicked the home button and launched Labryinth. The game's home screen has no exit choice. If I double click the home button and choose Safari, is Labrynith still running?
Maybe I just don't understand how this os works. Do apps not use memory if they are not actively shown on the screen?
Message was edited by: JimHdk
JimHdk wrote:
No, when one presses the home button the open app does not necessarily close if it is capable of multitasking (for example Pandors radio).
The recent apps bar is really for selecting among recent apps. That is to say it is a way to switch between apps without having to go to the app screens to find the app.
Note only a subset of apps are actually capable of multitasking and these are rather obvious when they are running. There is an indicator to the left of the battery level indicator which indicates this (>).
Message was edited by: JimHdk

How to identify what columns are being suppressed

Hi,
I have a database that may be masking some columns via a VPD. I'd like to identify the policies and the columns that are masking it. I have checked ALL_POLICIES (and DBA_POLICIES) but (I think) it doesnt show the columns that are being masked. What system tables should I be looking at for this detail. I couldn't locate this information in the Oracle documentation. Thanks.
Harold.

Hi,
Query DBA_SEC_RELEVANT_COLS
Salman

How to identify which server are connected in a switch?

Hi,
Many servers are connected to a switch?
How to identify what server are connected to which port remotely?
Thanks!
Samuel

Hi Sam,
just issue the command show ip arp , it will display some thing like this for know the MAC address & the VLAN number.
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.2.1.18 9 0800.6913.710e ARPA Vlan2
to know on which port it is connected, just issue the command as mentioned below
sh mac-address-table address 0800.6913.710e
Mac Address Table
Vlan Mac Address Type Ports
2 0800.6913.710e DYNAMIC Po1
hpe this will help you to identify your servers.
rate this post.

TS2529 how to fix the error message itunes can't sync apps because it can't determine what apps are installed

how to fix the error message itunes can't sync apps because it can't determine what apps are installed

Hi,
This may be Helpful
AMDS for Windows
http://support.apple.com/kb/TS1567

How can I find out what apps are on my step daughters phone without the phone?

How can I find out what apps are on my step daughters phone without the phone? She is on my phone plan but does not live with me and I am concerned about the apps she may be using.

baniville108,
Thank you for reaching out to us. We certainly know the importance of being able to know what options are available with your device. With apps on devices, thoses are specific to the phone itself, so there is no open forum to view what apps are downloaded. The only option would be to physically review from the phone, or if you have the same Apple ID you can log into it and view from there. Please let us know if you need anymore assistance.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport

How to identify what are all the events are created in background jobs?

Hi all,
how to identify what are all the events are created for background jobs. And what events gets triggered for a particular job.
thanxs
haritha

Hi Haritha,
JOB is a program which starts to a determined point of time and executes some standard programs in the system. JOBs can be planed to a determined point of time on the regular basis (every night, for example) or to some discret time moments. So, the JOB can be planed and then will be started automatically without the manual start.
Realtime programs are understood in the most cases as actual program execution which is started by somebody to the actual moment of time.
Typically per JOBs some special processes will be started that should be executed automatically and regularly: for example, IDOC application, some correction reports, statistic updates etc.
Standard jobs are those background jobs that should be run regularly in a production SAP System These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
Use
As of Release 4.6C, the Job Definition transaction ( sm36 ) provides a list of important standard jobs, which you can schedule, monitor, and edit.
Standard jobs are those background jobs that should be run regularly in a production SAP System. These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw70/helpdata/en/24/b884388b81ea55e10000009b38f842/frameset.htm
About Events:
Events have meaning only in the background processing system. You can use events only to start background jobs.
Triggering an event notifies the background processing system that a named condition has been reached. The background processing system reacts by starting any jobs that were waiting for the event.
Types of Events:
There are two types of events:
1.)System events are defined by SAP. These events are triggered automatically when such system changes as the activation of a new operation mode take place.
2.)User events are events that you define yourself. You must trigger these events yourself from ABAP or from external programs. You could, for example, signal the arrival of external data to be read into the SAP system by using an external program to trigger a background processing event.The event scheduler processes an event if the event is defined in the system.
For example, if a system (System 1) receives an event from another system (System 2), the event scheduler of System 1 processes the event only if it is defined in System 1. That event does not need to be defined in System 2 (the sending system).
You define an event by assigning a name (EVENTID) to it. When defining an event, you do not define the event arguments.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw04s/helpdata/en/fa/096e2a543b11d1898e0000e8322d00/frameset.htm
When you schedule the process chain or infopackages the jobs associated with it run in the background mode. In case you want to create a job for a specific activity you can do so in SM36. You would be creating jobs that would get executed in any one of the options:
1. Immediate
2. Date & Time
3. After event.
4. After job.
5. At Operation mode.
In case you want to view the job logs go to sm37.
Also Pls check DB02 for database performance and ST03 for workload .
Analyse u will have an idea ,
*pls assign points,if info is useful**
Regards
CSM reddy
null

How do i identify what devices are connected to 101, 102, etc on my air port extreme?

How do i identify what devices are connected to 101, 102, etc on my air port extreme?

Depending on whether a device is connecting using Ethernet or wireless, you need to know the Ethernet ID or AirPort ID of the device. That is the number that is associated with the IP address that is displayed in AirPort Utility.
For example, if you have a Mac....
Open System Preferences (gear icon on the dock) and open Network
Click on AirPort , then click Advanced at the lower right
The AirPort ID of the Mac is displayed at the bottom of the window
For the Ethernet ID, click on Ethernet, then click Advanced, then click the Ethernet tab
The Ethernet ID is displayed at the top of the window
On an iPhone.....
Tap the Settings icon, tap General, tap About, then scan down to locate Wi-Fi Address, also known as the AirPort ID.

Parental Controls - How do I find what apps are starting for an account?

I turned on Parental Controls for my kids and when they log into their accounts they get a series of dialogs saying "You don't have permission to run <APP>, with Done, Always Allow and Allow Once buttons. Things like GoogleUpdater. None of these apps are in their startup list in System Preferences. How can I find what apps are set to startup for each account?
- Thanks

Here's a tip from another user that may help you:
"I was running into the same problem trying to find apps for my daughters Iphone 3g running 4.2.1. What I did was go to the Itunes store through Itunes on my PC, and then went to the bottom of the main page and clicked "Browse." On the browse page I selected, App Store, Games (category), Kids (subcategory), and then a list of apps appears below.
I sorted by date (oldest to newest) by right-clicking next to "price" and choosing "release date" on the menu that pops up. The date created field will then be showing, which you can click on to sort newest to oldest or oldest to newest. I downloaded a bunch of free apps starting from the oldest (by name - you don't have much else to go on). Of the 30 or so I added to my Itunes, about 27 of them were compatible with 4.2.1.
This is defintely not a perfect way of finding apps, but after spending a lot of time searching for a better way this was the best I could come up with."
You can also check out these web sites:
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices
http://findoldapps.com
Other posts or users here may provide other tips on how to look for compatible apps.
Regards.

What apps are assigned to a given Desktop

How can I find out what apps are assigned to a specific Desktop in Mission Control?

It's kind of a pain, but you can do it from the Terminal. Do "defaults read com.apple.spaces". This will get you a list of what apps are bound to what desktop UUIDs. It will also give you a list of UUIDs. It's up to you to match them.
Here's an example. I have six desktops set up. Each desktop other than Desktop 1 has an entry in the "spaces" array showing its UUID. Desktop 1 doesn't an entry, or a UUID. Now look at the "app-bindings". AdiumX is on all spaces. The values for Mail and Thunderbird are blank; they're both assigned to Desktop 1. For the others you need to match UUIDs, keeping in mind that the first element of the array is Desktop 2. Firefox's UUID matches the first space's UUID, so it's assigned to Desktop 2. iCal's UUID matches the last space's UUID, so it's assigned to Desktop 6.
Aren't you glad that OSX makes everything so easy?
macduff:~$ defaults read com.apple.spaces
    "app-bindings" =     {
        "com.adiumx.adiumx" = AllSpaces;
        "com.apple.ical" = "FEC779CF-A27B-4A63-8E24-D2C94846C41A";
        "com.apple.mail" = "";
        "org.mozilla.firefox" = "BEC5A855-AD96-4DF0-8A99-4FE5CF52AD3D";
        "org.mozilla.thunderbird" = "";
    spaces =     (
            type = 0;
            uuid = "BEC5A855-AD96-4DF0-8A99-4FE5CF52AD3D";
            type = 0;
            uuid = "6455C908-2F43-4350-AB16-116A14850C08";
            type = 0;
            uuid = "A755E52F-E099-4B41-B6D1-42CF9B97308D";
            type = 0;
            uuid = "5FD11E4A-A357-4FCF-A0ED-62C49A62238A";
            type = 0;
            uuid = "FEC779CF-A27B-4A63-8E24-D2C94846C41A";

What apps are available for ipod touch 1st generation

what apps are available for 1st generation ipod touch

Here's a list of Apps/games I've been able to download & play for 1st gen ipod touch:
1. Dragon Story
2. Dragon Village
3. World War
4. Rollercoaster Buggy
5. GTA: Chinatown Lite
6. iBrowser Free
7. Castle Magic Lite
8. Tappily Ever After
9. TextFree
10. Unblock Me
11. Emer. Radio Free
12. Need For Speed: Hot Pursuit
13. Touch Chords
14. Word Search
15. Ghost Stories
16. Search Bing
17. HTML Viewer
18. Multi-App
19. Namco Portal
20. Fantasy Background
21. Shanghai Lite (Mahjongg)
22. Solitaire
23. Bling
24. Freecell
25. Fairy*
26. City Story
27. *City*
28. Nightclub
29. Hidden Object Free
30. Party In My Dorm
31. Crossworlds: The Flying City
32. Fast-Connect (WiFi)
33. Taptown 2
34. The Hunt
35. Daily Jigsaw
36. Hidden Mysteries: Civil War
37. Slingo Supreme Lite
38. Pocket Bingo
39. Keno Keno Free
40. Live Bingo
41. Scrabble Free
42. Boggle Free
43. Fruited
44. Free Browser
45. Monster City
46. City Zombies
47. Jewel Farm
48. iSpaceship Landing
49. Land Of The Lost: Crystal Adventure
50. Exotic Positions
51. Sex Postions Game
52. iFun Sex
53. Yukon (Solitaire)
54. Canfield (Solitaire)
55. Sex Positions
56. Pickup Lines
57. Yo Momma Ultimate Lite
58. Jokes
There are more.

How to identify Which ports are using in RAC setup?

Hi,
how to identify Which ports are using in RAC setup?
Thnaks,

[Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

How to identify what apps are on disc

Similar Messages

Maybe you are looking for