How to identify what queries are embeded in workbook in bi 7?

Hi all,
How to identify what are all the queries are used in the workbook in Bi 7?
can anyone help me on this!!
Thanks
pooja

Hi,
Please check the table RSRWORKBOOK. Enter the name of the work book, it will give you the GENUID of the query. Pass these values to table RSRREPDIR. You will get the names of the queries.
- Jaimin

Similar Messages

  • How to determine which queries are in which workbooks?

    HI Folks.
    I am attempting to determine if there is a method by which I can determine which queries are utilized in which workbooks in SAP BW system. 
    I found table RSRWBINDEXT which gives me the workbookid and name.  However I am not able to locate the table that gives me workbook id and query id. 
    Please let me know if you this table?
    Thanks
    Uday

    Hi,
    In BEx... copy workbook technical name.
    After wards goto RSA1 metadata repository click-workbook---find your workbook.
    If you click that workbook It gives receives information from all Queries list
    Thanks,
    Mirza

  • How to identify what columns are being suppressed

    Hi,
    I have a database that may be masking some columns via a VPD. I'd like to identify the policies and the columns that are masking it. I have checked ALL_POLICIES (and DBA_POLICIES) but (I think) it doesnt show the columns that are being masked. What system tables should I be looking at for this detail. I couldn't locate this information in the Oracle documentation. Thanks.
    Harold.

    Hi,
    Query DBA_SEC_RELEVANT_COLS
    Salman

  • How to identify what apps are on disc

    I already closed my other thread about G5 discs and unidentified Tiger disc.
    I have discs 1 and 2 belonging to 2Z603-5439 set.
    Disc 1 is a 2Z691-5025-A Ver. 1 for a Power Mac G5...nothing on grey label denotes what is in software bundle.
    Does this disc work on any PPC G5? and does software bundle include iMovie, GarageBand, etc????
    Need help asap

    Thanks BDAqua
    As Klaus wrote in replies to my other post I definitely got stabbed on this one.
    "Lost" my Tiger retail disc so went looking for replacement...very hard to find
    Found this supposedly full set on ebay, then found out it was for G5, but ad appeared to refer to ANY G5.
    Of course not all the same, but Black retail disc will install on ANY PPC. I knew this and thought this came with one. Picture showed that disc, but what I ended up with is probably a seller labeled 10.4.6 upgrade disc in the set. This is only disc that looks likeit would install that version of Tiger. I tried it up to options page, indicating it would install the OS. Upgrade wouldn't act like that, so therefore this disc is definitely a copy of Tiger retail disc, but with "homemade" label
    Thanks for the help......If I intended to buy a G5 someday I probably would get a 1.6 or 1.8 Mhz Single Processor one.Of course that isn't full blown but alot better than what I now have.

  • How to identify which server are connected in a switch?

    Hi,
    Many servers are connected to a switch?
    How to identify what server are connected to which port remotely?
    Thanks!
    Samuel

    Hi Sam,
    just issue the command show ip arp , it will display some thing like this for know the MAC address & the VLAN number.
    Protocol Address Age (min) Hardware Addr Type Interface
    Internet 10.2.1.18 9 0800.6913.710e ARPA Vlan2
    to know on which port it is connected, just issue the command as mentioned below
    sh mac-address-table address 0800.6913.710e
    Mac Address Table
    Vlan Mac Address Type Ports
    2 0800.6913.710e DYNAMIC Po1
    hpe this will help you to identify your servers.
    rate this post.

  • How to identify what are all the events are created in background jobs?

    Hi all,
    how to identify what are all the events are created for  background jobs. And what events gets triggered for a particular job.
    thanxs
    haritha

    Hi Haritha,
    JOB is a program which starts to a determined point of time and executes some standard programs in the system. JOBs can be planed to a determined point of time on the regular basis (every night, for example) or to some discret time moments. So, the JOB can be planed and then will be started automatically without the manual start.
    Realtime programs are understood in the most cases as actual program execution which is started by somebody to the actual moment of time.
    Typically per JOBs some special processes will be started that should be executed automatically and regularly: for example, IDOC application, some correction reports, statistic updates etc.
    Standard jobs are those background jobs that should be run regularly in a production SAP System These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
    Use
    As of Release 4.6C, the Job Definition transaction ( sm36 ) provides a list of important standard jobs, which you can schedule, monitor, and edit.
    Standard jobs are those background jobs that should be run regularly in a production SAP System. These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
    for more information you can go thru the following thread:
    http://help.sap.com/saphelp_nw70/helpdata/en/24/b884388b81ea55e10000009b38f842/frameset.htm
    About Events:
    Events have meaning only in the background processing system. You can use events only to start background jobs.
    Triggering an event notifies the background processing system that a named condition has been reached. The background processing system reacts by starting any jobs that were waiting for the event.
    Types of Events:
    There are two types of events:
    1.)System events are defined by SAP. These events are triggered automatically when such system changes as the activation of a new operation mode take place.
    2.)User events are events that you define yourself. You must trigger these events yourself from ABAP or from external programs. You could, for example, signal the arrival of external data to be read into the SAP system by using an external program to trigger a background processing event.The event scheduler processes an event if the event is defined in the system.
    For example, if a system (System 1) receives an event from another system (System 2), the event scheduler of System 1 processes the event only if it is defined in System 1. That event does not need to be defined in System 2 (the sending system).
    You define an event by assigning a name (EVENTID) to it. When defining an event, you do not define the event arguments.
    for more information you can go thru the following thread:
    http://help.sap.com/saphelp_nw04s/helpdata/en/fa/096e2a543b11d1898e0000e8322d00/frameset.htm
    When you schedule the process chain or infopackages the jobs associated with it run in the background mode. In case you want to create a job for a specific activity you can do so in SM36. You would be creating jobs that would get executed in any one of the options:
    1. Immediate
    2. Date & Time
    3. After event.
    4. After job.
    5. At Operation mode.
    In case you want to view the job logs go to sm37.
    Also Pls check DB02 for database performance and ST03 for workload .
    Analyse u will have an idea ,
    *pls assign points,if info is useful**
    Regards
    CSM reddy
    null

  • How do i identify what devices are connected to 101, 102, etc on my air port extreme?

    How do i identify what devices are connected to 101, 102, etc on my air port extreme?

    Depending on whether a device is connecting using Ethernet or wireless, you need to know the Ethernet ID or AirPort ID of the device. That is the number that is associated with the IP address that is displayed in AirPort Utility.
    For example, if you have a Mac....
    Open System Preferences (gear icon on the dock) and open Network
    Click on AirPort , then click Advanced at the lower right
    The AirPort ID of the Mac is displayed at the bottom of the window
    For the Ethernet ID, click on Ethernet, then click Advanced, then click the Ethernet tab
    The Ethernet ID is displayed at the top of the window
    On an iPhone.....
    Tap the Settings icon, tap General, tap About, then scan down to locate Wi-Fi Address, also known as the AirPort ID.

  • How to identify Which ports are using in RAC setup?

    Hi,
    how to identify Which ports are using in RAC setup?
    Thnaks,

    [Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

  • How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

    How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

    To see what reports are running, take a look at the execution log views that are available in the database.  Which views that are available are dependent on your version of SSRS.
    http://technet.microsoft.com/en-us/library/ms159110.aspx
    To see which application is using SSRS is a little more difficult.  You can turn HTTP logging on, which will give you an idea of where connections are coming from, so you can see IP addresses.  You can also look at the execution log view to see
    user accounts.  So, depending on your environment and use of service accounts, this could be easy, or difficult.
    http://technet.microsoft.com/en-us/library/bb630443.aspx
    If all else fails you can look for clues in the SSRS logs.  Good luck...

  • How to know what applications are currently running !!

    how to know what applications are currently running !!

    if it is in linux use "ps(Process Status)" command to know what is running currently.... for more see this link
    http://www.computerhope.com/unix/ups.htm

  • Does anyone know how to see what apps are still open on lion? On snow leopard you just had to slide three fingers side ways I believe thanks

    Anyone know how to see what apps are still open on lion?

    If you do not have the light in dock active, activate it, or slide three finger up to open Mission Control or in Force qQuit all  open programs are listed (even the hidden ones).
    Hope that helps..

  • How to insert  two queries in the same workbook in new BI 7.0 Bex web analy

    Hi
    Can you please advise how to insert multiple queries in the same workbook in BI 7.0 web analyser.
    Sarah

    Hi,
    You need to switch to design mode (BEx Analyser Menu - Design Toolbar - Design Mode). For each query that you want to embed, insert an analysis grid item in the workbook. Link each analysis grid to its corresponding data provider (query).
    Hope this helps.
    Regards,
    Rajkandula

  • How to tell what fonts are missing in a Photosohp CS5 document?

    Hello!  I have received some work from a graphic designer.  I need to modify some of the text in the document.  When I open the document I get an error message:
    Some text layers might need to be updated before they can be used for vector based output.  Do you want to update these layers now?  [Update] [No]
    If I click [Update] it replaces the font with Myriad Pro.  If I click [No] the text looks the way the designer intended, but I have the exclamation mark-triangle symbol over the layer with the text.  If I try to edit the text I get another warning:
    Editing or rendering the text layer "Text Layer" will cause its layout to change.  Continue?  [Cancel]  [OK]
    The same behavior described above occurs.  If I click [Cancel] I obviously can't edit the text.  If I click [OK] it changes the font to Myriad Pro.
    I would like to determine what font the layer is using.  I could swear that previous versions of Photoshop would tell me what fonts were missing when I opened a document.  I can't use the text tool to select the text without it changing the font.  Other posts have mentioned using the text tool to look at the text drop-down to find a greyed-out font which indicates the missing font.  I do not have that.  I only have perhaps 200 fonts installed.  Can anyone tell me how to determine what fonts a .PSD document is using?  I would prefer not to bug the graphic designer if possible.  Thanks much!
    ~ Dan

    Not sure why you are getting ""Font is present on the system but requires a layout change.", usually you do not get that instead the name of the font shows.
    We use extensis Universal Type Client, so the fonts load automatically upon opening files, and never really get missing fonts in Photoshop.
    Actually fontbook has auto font loading if you want to give that a try. Fontbook >> Preferences

  • How to identify what to change with a BADI

    I have to implement a BADI for the first time. I have no big problem with the general concept, but I am having a major problem with knowing what data structures can be modified.
    I am implementing the BADI PARTNER_UPDATE in CRM. I have a break point in my implementation, but I cannot explicitly see what structures are available for me to modify.
    The documentation for the BADI (which SAP expressly state must be comprehensively maintained) is non-existent in english. There are no structures passed in with the method, and when I look at the implementing object in the debugger I cannot see any of the atributes, public, statis or private.
    So how can I find out what are the structures that can/should be updated in the BADI? This is irritating; at least function modules are self-documenting with respect to structures that can be used (provided that they are passed into the FM). Methods too, if they have parameters, but this BADI is not very helpful at all.
    Kind regards,
    Tony.

    Hi,
    even  i' am not able to find any thing.
    it doesn't need any thing to pass..
    but there is a sample implementation check it.
    <b>CL_EX_PARTNER_UPDATE</b> in SE24.
    two methods are implemented.
    you can see the code also.
    regards
    vijay
    Message was edited by: Vijay Babu Dudla

  • How to check what fields are output from ABAP to smartform

    Hi All,
    I am working on a Zcopy of RLB_INVOICE smart form and need to check what fields are being output to the vendor_address window in the smartform.
    I have examined the NACE setup and found "Medium -> printoutput", "Program -> ZRLB_INVOICE", "Form Routine -> "ENTRY_INS", "Form -> ZRLB_INVOICE", "PDF/SmartForm -> ZRLB_INVOICE".
    Where would I find the code that shows the direct correlation between the driver program and a specific element of the smart form.
    All I need to check is that all elements of the venfore address are being sent to the form as I am hearing reports that we are missing house number on the printed output.
    Many thanks

    Hi Meenakshi,
    First you find out your driver program. Here in your case it is ZRLB_INVOICE. Then within that check where address of the vendor is found and is assigned to which import parameter of the smartform.
    Check your smartform also. Find which all fields are being printed in that. If vendor_address window is an address window, then there will be uniques identifier passed to that window from the driver program.
    Regards,
    Abijith

Maybe you are looking for