How to identify when shd i go for lis nor for lo

hi all,
Can anyone explain me with a scenario to identify when shd we go for LIS extraction and we shd we opt for LO extraction.
thanxs
hari

Hi Hari,
Presently we are not using LIS, maximum we go for LO extraction only... when you no need V3 update , and you want to extract the entire module data ..(i mean not for a specific application wise.. )that time you can go for LIS.. but.. for updating the data definetly maximem we need only V3 update. so, always suggestable is LO extraction.. Previously we dont have Lo extraction.that time we go for LIS..
thansk
@jay

Similar Messages

How to Identify incoming and outgoing IDOC in the system for last one year.

Dear All,
How to Identify incoming and outgoing IDOC in the system for last one year.
Regards
Ashok

Dear Anindya,
I used WE05 the result by giving direction outbound.Then on created field i put the value date.I m getting the output in the no of idoc number.
This is only the way to identify?
Thnx
Ashok
Edited by: ashok singh on Oct 22, 2009 8:40 AM

How to identify which key figure will the numeric pointer for deltas?

Hi All,
I have created a numeric pointer for generic extraction ? but how to identify which key figure will the numeric pointer will use for deltas ?
how to identify the key figures which is suitable for numeric pointer. And the generic extraction is based upon the copa table?
Can anyone suggest me how the numeric pointer works and how to identify deltas are carried out at numeric pointer?
Thanks
Pooja

Pooja,
If you are using a generic extractor which is based on COPA table, then numeric pointer may not be the suggested delta extraction mechanism.
A time stamp would be the better one to use. In a time stamp, you can give a lower limit value of 300 seconds.. so that it will try to fetch the missed records.
Moreover, a delta would be based on a character, preferably a time char.
In your requirement, try to figure out the character on whichdeltas will be based.
Sasi

ALV: OOPS: How to identify when the BACK button is hit?

Hi All,
I have a requirement in which when the BACK button on the ALV output is hit, i have to leave to the Original Selection Screen.
I know that using SET SCREEN 0. this can be done. But i'm unable to find the point at which the Event about the BACK button is triggered.
How can i identify if the button hit was the back button?
Thanks in advance,
Jr.

Hi Jr,
u declare sy-ucomm in data decla.
in code try this out.
Case sy-ucomm.
when 'BACK'.
leave to screen#. " # For the selection screen (i dnt think it is 0).
u obviously have to set the PF status for the same by SE41 and in Aplication, u give name as BACK for the back symbol.
I hope is will help.
Reward if useful
Thanks
Sujay

How to identify when there is a break in continuity of an integer

Hi guys,
Can you give me an idea on how to solve the following issue?
column01 column02 column03 column04
1 001 002 0
2 003 004 0
3 009 010 1
4 015 018 1
5 019 020 0
so basically the fourth column (column04) is what I want to get if I am given the three columns. The flag 0 or 1 will be applied in the forth column if column02 is not a follow up number of the previous row's column03 value.
example, column04 is o for the second row because column03 os the first row is 2 and column02 of the second row is 3...hence 3 is the next number to 2.
thanks in advance
ebro

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI', 'ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We
need to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI', 'ISO Standard SQL. And you need to read and download the PDF for:
https:www.simple-talk.com/books/sql-books/119-sql-code-smells/
>> Can you give me an idea on how to solve the following issue? <<
No, we have to only guess. Why did you fail to post DDL? The silly picture of a table you posted has no name, no keys, no constraints. Yet you expect other people to read your mind.
Why are you using flags in SQL? That was assembly language. SQL is based on logic and predicates; we like to detect the actual state of being in the schema. Your ASCII picture shows leading zeros on some of th4e columns, so they have to be strings; sure
would help if you told us if this guess is right.
Here is my first attempt at doing what you shroud have done if you were polite:
CREATE TABLE Foobars
(foobar_seq INTEGER NOT NULL PRIMARY KEY, -- did I guess right??
col_2 CHAR(3) NOT NULL CHECK(col_2 LIKE '[0-9][0-9][0-9]),
col_3 CHAR(3) NOT NULL CHECK(col_3 LIKE '[0-9][0-9][0-9]),
-- ,stupid_flg INTEGER NOT NULL CHECK(stupid_flg IN (0, 1)) -- drop this column!
INSERT INTO Foobars
VALUES
(1, '001', '002', 0),
(2, '003', '004', 0),
(3, '009', '010', 1),
(4, '015', '018', 1),
(5, '019', '020', 0),
>> so basically the fourth column (stupid_flg) is what I want to get if I am given the three columns. The flag 0 or 1 will be applied in the forth column if col_2 is not a follow up number of the previous row's col_3 value. <<
Does “follow up number” mean that we are supposed to convert the string to a numeric, and look for a successor? Is col_1 actually the key?
Did you know that SQL is based on sets? Sets are mathematical structures which have no ordering. This whole exercise is highly suspect. What does the sequenced pair mean in your data model?
SELECT foobar_seq, col_2, col_3
CASE WHEN CAST(col_2 AS INTEGER) +1 = CAST(col_3 AS INTEGER)
THEN 'TRUE' ELSE 'FALSE' END AS stupid_flg
FROM Foobars;
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Sync does not work for tabs nor for tab groups.

I have sync account. I have a laptop and my main computer added there. Each time I click the "sync now" button on my laptop, only the bookmarks and addons sync! My tabs don't change nor do I get the tab groups that I have on my main computer.

The tabs won't open instantly as you click on sync. To access them, go to History -> Tabs from other Computers. Or in a new tab, type 'about:sync-tabs' in the address bar. (Assuming the [https://support.mozilla.org/en-US/kb/how-do-i-manage-my-firefox-sync-account#w_how-do-i-select-the-data-that-i-want-to-sync_2 sync settings] are correct).

How to identify whether any data source is created for a table?

hi all,
How to identify whether any extractions is been carried out for a particular table, view or function module(generic extraction)? from r/3.
bcos i need to create an extraction for a table, view and function module. But iam not sure whether any extractions is already been created for those tables, view, function modules??
thanxs
haritha

Hi,
By passing the following values as selection to table ROOSOURCE we can find whether any data source has been created or not .
EXMETHOD = V
EXTRACTOR = Table name
hope it helps..
regards,
raju

How to identify what are all the events are created in background jobs?

Hi all,
how to identify what are all the events are created for background jobs. And what events gets triggered for a particular job.
thanxs
haritha

Hi Haritha,
JOB is a program which starts to a determined point of time and executes some standard programs in the system. JOBs can be planed to a determined point of time on the regular basis (every night, for example) or to some discret time moments. So, the JOB can be planed and then will be started automatically without the manual start.
Realtime programs are understood in the most cases as actual program execution which is started by somebody to the actual moment of time.
Typically per JOBs some special processes will be started that should be executed automatically and regularly: for example, IDOC application, some correction reports, statistic updates etc.
Standard jobs are those background jobs that should be run regularly in a production SAP System These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
Use
As of Release 4.6C, the Job Definition transaction ( sm36 ) provides a list of important standard jobs, which you can schedule, monitor, and edit.
Standard jobs are those background jobs that should be run regularly in a production SAP System. These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw70/helpdata/en/24/b884388b81ea55e10000009b38f842/frameset.htm
About Events:
Events have meaning only in the background processing system. You can use events only to start background jobs.
Triggering an event notifies the background processing system that a named condition has been reached. The background processing system reacts by starting any jobs that were waiting for the event.
Types of Events:
There are two types of events:
1.)System events are defined by SAP. These events are triggered automatically when such system changes as the activation of a new operation mode take place.
2.)User events are events that you define yourself. You must trigger these events yourself from ABAP or from external programs. You could, for example, signal the arrival of external data to be read into the SAP system by using an external program to trigger a background processing event.The event scheduler processes an event if the event is defined in the system.
For example, if a system (System 1) receives an event from another system (System 2), the event scheduler of System 1 processes the event only if it is defined in System 1. That event does not need to be defined in System 2 (the sending system).
You define an event by assigning a name (EVENTID) to it. When defining an event, you do not define the event arguments.
for more information you can go thru the following thread:
http://help.sap.com/saphelp_nw04s/helpdata/en/fa/096e2a543b11d1898e0000e8322d00/frameset.htm
When you schedule the process chain or infopackages the jobs associated with it run in the background mode. In case you want to create a job for a specific activity you can do so in SM36. You would be creating jobs that would get executed in any one of the options:
1. Immediate
2. Date & Time
3. After event.
4. After job.
5. At Operation mode.
In case you want to view the job logs go to sm37.
Also Pls check DB02 for database performance and ST03 for workload .
Analyse u will have an idea ,
*pls assign points,if info is useful**
Regards
CSM reddy
null

Identify when a user has change value in USEREXIT_CHECK_VBAP before saving

I originally posted and closed this question, but I am still struggling with the code.
The req is now to also update the value of VBAP-LPRIO, so I now have to use the Exit : USEREXIT_CHECK_VBAP.
The issue is that my solution must take into account when a user manually overwrites a value and not replace it with a value determined in the user exit.
My problem is that the user might do the following
1 - Create a sales order and enter a new item line, press enter
2 - The user exit is triggered, and I check that XVBAP-UPDKZ = I (user add a new line)
3 - The user-exit determines the new value and populates the field
4- the user then click on the item line, and then manually changes the value of VBAP-LPRIO
5- The user-exit is triggered again, and because XVBAP-UPDKZ = I , my code is triggered and updates the field.
What I want is to identify that a user has manually changed the value and not overwritte the value.
1 - I have check YVBAP and it is blank, as the user has not saved the sales order.
2- The values of VBAP and XVBAP are the same..
3 - I cannot re-read the database (KNVV) table as the user could have populate the value with the same value.
What I need is how to identify when a user has made a change to a field before they save the sales item, as YVBAP is never filled.
Previous post----
Hello,
I am writing a bit of code that will overwrite the payment terms in a sales order item based on a number of factors. (ship-to, incoterms, document type, etc)
I am using the following program MV45AFZB at Exit : USEREXIT_CHECK_VBAP. I am using this exit as the users need to see the payment terms after an item has been entered into the sales order and not have the value determined at sales order save.
I am not using USEREXIT_MOVE_FIELD_TO_VBAP as it is only triggered once at the time of creation and not when I change the document. I need it in USEREXIT_CHECK_VBAP as users could change the incoterms in VA02, so the code must be redetermined.
My code is working as expected, however, I have a problem when a user enters a sales order item line and then manually changes the payment terms, as my code then is over writes the users values.
The flow is as follows
As user creates a sales order
They populate the sales order header
They populate material number and qty
User exit USEREXIT_CHECK_VBAP is triggered and correctly determines the payment terms
The user then double clicks on the sales order item and decides to overwrite the payment terms.
My user-exit is retriggered and check to see if XVBAP-UPDKZ = I (insert)
As it is still an insert, my code triggers.
I have tried to check YVBAP, but no entry exist as it stills is seen as in insert? What I really need to know that while it is still an insert, the user has change the field value and my code should not over write the users value.

When do you need to update LPRIO ? When user makes the change at the Payment terms on line item?
Regards,
Naimesh Patel

How to Identify the Same Characters in 2 Different Strings

Hi All,
I am requiring a suggestion on how to identify the same characters in 2 different Strings, for example:
String str1 = "hello";
String str2 = "llheo";
Both Strings contain the same characters, but in a different order, so what would be the best technique to verify t that both Strings indeed contain the same characters?
I was personally thinking along the lines of using the class, java.util.regex.Pattern?
Any thoughts would me much appreciated. Thanks

I would instead sort the characters, and then compare
the sorted data.
I'm fealing generous
    private static boolean anagram(String left, String right)
        if (left.length() != right.length())
            return false;
        char[] leftChars = left.toCharArray();
        char[] rightChars = right.toCharArray();
        Arrays.sort(leftChars);
        Arrays.sort(rightChars);
        return Arrays.equals(leftChars, rightChars);
    }

How to know when a function is running in TRFC mode

Hi,
I have an RFC function and i would like the program to behave differently when called as a TRFC.
The question is how to identify when it is being executed asynchronously rather than synchronously.
Did I miss something obvious?
Any suggestions?

Actually I think this is probably solved by calling FM TRFC_RECEIVER_INFO.

When you look at the datasource name how can you tell it is LO or LIS?

when you look at the datasource name how can you tell it is LO or LIS? for example 2lis_02_itm is it LO or LIS? how can you tell it is LO?
York

Hi Les,
In most of the cases if the data has S in it that it will be LIS data source else it will be LO datasource.
Normally LO datasources will have Header, Line Item and Schedule line datasources, where as LIS will contain onls LIS structure datasource ex: 2LIS_--_S*.
Checkout this Weblogs for more details:
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
To findout the weblogs in search type keyword and in listbox choose weblog and click on go.
example:
2LIS_11_VAHDR (LO)
2LIS_03_BF(LO)
2LIS_03_UM(LO)
2LIS_17_I3OPER(LO)
2LIS_02_S174(LIS)
2LIS_02_S012(LIS) etc...
Let me know if you have any questions.
Assign points if its helpful
Regards
Satish Arra.

How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts if changes on all computers.

How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts it changes on all computers. I would like to change icon and name for each computer.

you would need to setup a VPN and tunnel into your office.
FYI..the default ports are 3283 and 5900.

How can identify the default currency for a customer?

How can identify the default currency for a customer?
I know that this is being determined when you create a sales order for a particular customer, for example, so I could break this process open and find out what it uses. But I thought it worth asking in this forum first.
Blue

Hi Gary,
As per my understanding of your question I am replying , If you are looking some thing else then I request you to please elaborate your query.
If you see the BP sales area data in transaction BP, In billing tab you maintain the currency for a customer which is default currency when you create a sales order.
<b>Reward points if it helps!!</b>
Best regards,
Vikash

HR - How to identify the list of infotype populated for a pernr.

Hi,
When we go to pa30 tcode, and input a pernr and press enter, we can see the list of infotype populated for the particular pernr with a "tick" symbol. I would like to know, how SAP identify the same. Is there any table in which these information is stored.
Please do let me know the detail asap. This is urgent to me.
Regards
Gopalakrishnan S

Hi,
You can run a report named "RPLINFC0" to get list of infoypes which are used for a PERNR.
I think its enough for you.
Regards,
Purnima

How to identify when shd i go for lis nor for lo

Similar Messages

Maybe you are looking for