How to identify whether a TCode is for SAP query or for a customized TCode

Hi,
We have a list of TCodes starting with Y_*
Some of these TCodes could be related to SAP Queries and some could be real custom transactions. How do I find out which one of those are related to SAP queries and which ones are related to custom SAP transactions?
I have already checked table TSTC for the program names of these Transactions, but the program name field (PGMNA) is blank. Also in TCode SE93 the transaction mentioned is START_REPORT. Also for some, when I go to the transaction (Y_*) and then environment->status to check the program name the values found are something like AQ11FI==========F10A==========.
Please help on how to identify whether a TCode is actually for an SAP query or for a customized transaction.
Thanks in advance.
Mick

Thanks Anil.
In TSTC, the filed for program name is blank. Therefore I would have to go to each and every transaction (I have around 250 Y_* TCodes with me) and then to environment->status to get the program name and then check whether it is A......
Is there any easier way to know whether a TCode refers to an SAP query or a custom developed transactions/program.
Mick

Similar Messages

How to identify whether any data source is created for a table?

hi all,
How to identify whether any extractions is been carried out for a particular table, view or function module(generic extraction)? from r/3.
bcos i need to create an extraction for a table, view and function module. But iam not sure whether any extractions is already been created for those tables, view, function modules??
thanxs
haritha

Hi,
By passing the following values as selection to table ROOSOURCE we can find whether any data source has been created or not .
EXMETHOD = V
EXTRACTOR = Table name
hope it helps..
regards,
raju

How to identify whether a multiline container is empty or not in Workflow?

Hi Experts,
Does any1 know how to identify whether a multiline container
is empty or not in a workflow?
Thanks.
Points wil be rewarded.
Vincent

Dear Vincent,
You can get the report name for the Business Object which contains the multi-line container, from the BO itself. Put a break-point in the report and try executing the workflow. The multiline container is like an internal table in the report. See if the internal table is initial while execution.
Regards,
Michael.

How to identify whether the data extracted is direct, queued, unserialized

hi,
how to identify whether the data extraction from r/3 is direct, queued and unseralized data.
can anyone let me know abt it
regds
hari

hI,
Direct Delta: With this update mode, the extraction data is transferred with each document posting directly into the BW delta queue. In doing so, each document posting with delta extraction is posted for exactly one LUW in the respective BW delta queues.
This update method is recommended for the following general criteria:
a) A maximum of 10,000 document changes (creating, changing or deleting documents) are accrued between two delta extractions for the application in question. A (considerably) larger number of LUWs in the BW delta queue can result in terminations during extraction.
b) With a future delta initialization, you can ensure that no documents are posted from the start of the recompilation run in R/3 until all delta-init requests have been successfully posted. This applies particularly if, for example, you want to include more organizational units such as another plant or sales organization in the extraction. Stopping the posting of documents always applies to the entire client.
Queued Delta: With this update mode, the extraction data is collected for the affected application instead of being collected in an extraction queue, and can be transferred as usual with the V3 update by means of an updating collective run into the BW delta queue. In doing so, up to 10000 delta extractions of documents for an LUW are compressed for each DataSource into the BW delta queue, depending on the application.
new queued delta
This update method is recommended for the following general criteria:
a) More than 10,000 document changes (creating, changing or deleting a documents) are performed each day for the application in question.
b) In future delta initializations, you must reduce the posting-free phase to executing the recompilation run in R/3. The document postings should be included again when the delta Init requests are posted in BW. Of course, the conditions described above for the update collective run must be taken into account.
Non-serialized V3 Update:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
unserialized v3 update
This update method is recommended for the following general criteria:
a) Due to the design of the data targets in BW and for the particular application in question, it is irrelevant whether or not the extraction data is transferred to BW in exactly the same sequence in which the data was generated in R/3.
take a look Roberto's weblog series
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
https://weblogs.sdn.sap.com/pub/wlg/126 [original link is broken] [original link is broken] [original link is broken]
doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
and oss note 505700
Re: delta methods
go throuth the previous thread
Delta types
hope it helps..

How to identify whether my query is been already transported or not?

Hi all,
How to identify whether any transport request are created for my query. And also how to identify whether the query in the production is been transported to the QA.
Thanxs
Haritha

Hi haritha,
Once the request is generated u can write the request number and chk in the other server STMS ...if u find the request thr ur transportation should be sucessful
chk this link...
http://help.sap.com/saphelp_nw04/helpdata/en/b5/1d733b73a8f706e10000000a11402f/content.htm
It is very simple ,
Goto RSA1> Trasport connections> drag & drop ur query to right side panel--> observe the coulmns ( pakage column ) --> If the pakage is $TMP u can sy that that perticular query is not transported ---> If it other than $TMP ( That query has Transported alreay).
Assign points if helpful
Cheers
Raj

How to identify the system generated program for any standrd extraction?

Hi all,
How to identify the standard program generated for any extraction takes place. Is there any tcode to figure out the standard abap prgms for the datasource.
for instance:
for the data source : 2LIS_02_SCL what is the standard extractor program used.
Thanks
Pooja

Hi hemanyt,
i cant find the table RSTRAN active.
Thanks
Pooja

How to Identify whether string contains only numbers

Hi Experts,
How to identify whether a string contains only numbers...
Thanks & Regards,
Neeraj.

Hi Neeraj,
ISNUMERIC(String_Field)
The above function returns '0' for non-numerics and
'1' for numeric
Hope this helps.
Regards,
Bala

How to find whether MIRO is done for a PO

Hi All,
Is there any indicator attached to POs that indicates whether MIRO is done for that PO?
I mean after PO creation in ME21N -> GR in MIGO -> Excise (if applicable) and -> MIRO... how to find whether MIRO is done for a particular PO?
Helpful tips will be gratefully rewarded...
Regards,
Karthik

See if an entry exist in EKBE for the PO Number and its items.
The complete process though is, to find the GR Quantity for each PO Item and see if it matches with the PO Item quantity.
SELECT EBELN
         EBELP
         MENGE
         LOEKZ
    FROM EKPO
    INTO TABLE LT_EKPO
   WHERE EBELN = P_EBELN.
IF NOT LT_EKPO[] IS INITIAL.
    SELECT EBELN
           EBELP
           MENGE
           BEWTP
           GJAHR
           BELNR
           BUZEI
           SHKZG
      FROM EKBE
      INTO TABLE LT_EKBE
      FOR ALL ENTRIES IN LT_EKPO
     WHERE EBELN = LT_EKPO-EBELN
       AND EBELP = LT_EKPO-EBELP
       AND VGABE = '1'.
ENDIF.
LOOP AT LT_EKBE.
* Change the sign of the quantity for debit
    IF LT_EKBE-SHKZG = C_SHKZG_H.
      LT_EKBE-MENGE = -1 * LT_EKBE-MENGE.
    ENDIF.
    MOVE-CORRESPONDING LT_EKBE TO LT_EKBE_SUM.
    COLLECT LT_EKBE_SUM INTO LT_EKBE_SUM.
    CLEAR LT_EKBE_SUM.
    ENDLOOP.
   loop at it_ekpo.
** For each line item, calculate the total GR Quanity
    READ TABLE LT_EKBE_SUM WITH KEY EBELN = LT_EKPO-EBELN
                                    EBELP = LT_AWKEY-EBELP.
    IF SY-SUBRC = 0.
* If the PO Item Quantity is equal to GR Quantity
        IF LT_EKPO-MENGE <= LT_EKBE_SUM-MENGE.
* The PO Item can be considered completed GRed
        ENDIF.
    ENDIF.
ENDLOOP.

How to identify, whether your iphone is permanently unlocked or not?

How to identify, whether your iphone is permanently unlocked or not?

gautam30 wrote:
How to confirm?
Did you not read wjosten's reply?

How to identify whether a page is color page or monochrome page?

Could anyone tell me how to identify whether a page is color page or B/W page. I'm creating a plugin.
I tried using the following code
HDC hdcMem = CreateCompatibleDC(NULL);
if(!hdcMem){
PDPageRelease(objPDPage);
return FALSE;}
char *palette = (char*)malloc(4);
ASFixedMatrix matrixFlipped;
PDPageGetFlippedMatrix(objPDPage,&matrixFlipped);
char *palette = (char*)malloc(4);PDPageDrawContentsToWindow(objPDPage,(void*)NULL,(void*)hdc,false,&matrixFlipped,(ASFixedRect*)NULL,NULL,NULL);
if(PDPageGetPalette(objPDPage,(void*)hdc,palette)){
here the PDPageGetPalette always returns false.
I don't know whats wrong in the code. Please help me.
Any other simpler way to active my task would be appreciable.
Thanks in advance.

HDC hdcMem = CreateCompatibleDC(NULL);
char*palette = (char*)malloc(4);
ASFixedMatrix matrixFlipped;
PDPageGetFlippedMatrix(objPDPage,&matrixFlipped);
PDPageDrawContentsToWindow(objPDPage,(void*)NULL,(void*)hdc,false,&matrixFlipped,(ASFixedRect*)NULL,NULL,NULL);
if(PDPageGetPalette(objPDPage,(void*)hdc,palette))
here the PDPageGetPalette() always returns false. Whats wrong with the code?
I want to check the palette values.
Please help.

How to identify whether Technical Content is been installed or not?

Hi all,
Can anyone let me know how to identify whether technical content in BW 3.5 is been installed or not?
thanxs
haritha

Hi Haritha,
Check this PDF,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
And this link also,
http://help.sap.com/saphelp_nw04/helpdata/en/e5/2d1e3bd129be04e10000000a114084/frameset.htm
Hope this clears your doubt...

How to identify whether that particular process chain is active or not?

Hi all,
How to identify whether that particular process chain is active or not ?
thanxs
haritha

If see the process chain then it will not be greyed out if it is active. Or else check in these tables.
RSPCCHAIN
RSPCCHAINT
to check the logs
RSPCLOGS
RSPCPROCESSLOG
Give the chain name and check in the object version.
Khaja

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

How can we maintain multiple payment terms for a customer

how can we maintain multiple payment terms for a customer?

Hi,
You can leave the Payment terms field in the sales area data tab blank. and you can enter the payment terms at line item level while creating the sales order. By that you will achieve multiple payment terms for the same customer in the same sales order. but the invoice will be split by standard SAP based on the payment terms.
Also difference between the "Payment Terms" field in Company code tab and the sales Area tab is.
Company code tab payment terms are used only for the documents that are posted directly in FI module. for example credit and debit memos posted directly in FI and as a leading practice this should always be "payable Immidiately"
Sales area Tab payment terms are the one which are copied on to the sales order header data which are valid for all the line items unless you specifically mention different payment terms at line item level.
Regards,
Shantanu

How does one define a default style for a custom Flex component?

How does one define a default style for a custom Flex component?
hello
I created a new set of Flex component library slib.swc (Flex 4.5). Would also like to have a default style. defaults.css file, making it the default style of the component library.
Like flex the builder install directory of sdks \ 4.5.0 \ frameworks out \ libs directory has a spark.swc file, open with Winrar will see defaults.css this file. Defaults.css file defines the default style of the flex spark components.
How can it be achieved?
As follows
slib.swc contains a CLabelEx components, and a defaults.css file
defaults.css source file as follows:
@ namespace s "library :/ / ns.adobe.com / flex / spark";
@ namespace mx "library :/ / ns.adobe.com / flex / mx";
@ namespace cn "http://os.slib.cn";
cn | CLabelEx
        styBackgroundAlpha: 1;
        styBackgroundColor: # 569CC0;
        styBorderAlpha: 1;
        styBorderColor: # 569CC0;
        styBorderWeight: 1;
        styCornerRadius: 3;
In slib.swc the application MyLabel.mxml of the source file as follows:
<? xml version = "1.0" encoding = "utf-8"?>
<s: Application, the xmlns: fx = "http://ns.adobe.com/mxml/2009
                           xmlns: s = "library :/ / ns.adobe.com / flex / spark"
                           xmlns: mx = "library :/ / ns.adobe.com / flex / mx"
                           xmlns: cn = "http://os.slib.cn
                           the minWidth = "955" The minHeight = "600">
        <fxeclarations>
        </ fxeclarations>
        <cn:CLabelEx x="67" y="112"/>
</ s: Application>
I hope CLabelEx default use cn | CLabelEx, style to display its appearance.
I refer to above approach, but failed to achieve. Can you please re-Detailed
Thanks!

dj is right. Any Folder can be a picture folder.
Create a root level folder and add it to your Pictures Library in Windows. It will show up with all the scattered pictures from other programs. It can even be a different dirve if you like. You can even specify one to be the default save location for pictures in this dialog.
Navigate to Pictures in your Libraries in Windows Explorer Right Click and select Properties.
Message was edited by: Rikk Flohr forgot the instructions...

How to identify whether a TCode is for SAP query or for a customized TCode

Similar Messages

Maybe you are looking for