How to identify whether  jail break was not installed on iphone 5s with ios 8.1.2?

Hi everyone!
I've bought unlocked iphone 5s from official reseller in my country (major mobile operator) and have a question:
Is there an authentic way to identify that the phone was not jailbreaked?

First ,what makes you think it could be hacked
There may be telltale "apps" showing or the iPhone will react strangely
Purchased from Whom and Where

Similar Messages

  • How do I recover Apps Data from the iCloud on iPhone 4S with IOS 6.1?

    How do I recover Apps Data from the iCloud on iPhone 4S with IOS 6.1?

    You would have to restore to your entire iCloud backup, if you have one.  (The backup includes app data.)  Restoring to an iCloud backup has to be done in the initial setup process.  If you have any data on your phone now that is not in the backup that you want to save you'll need to do that first.  Then go to Settings>General>Reset and tap Erase All Content and Settings.  You will then go through the setup screens as you did when the phone was new. When given the option, choose Restore from iCloud Backup.  Be sure you are connected to wifi and your charger as this will take some time to finish.

  • How to identify whether Technical Content is been installed or not?

    Hi all,
    Can anyone let me know how to identify whether technical content in BW 3.5 is been installed or not?
    thanxs
    haritha

    Hi Haritha,
    Check this PDF,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
    And this link also,
    http://help.sap.com/saphelp_nw04/helpdata/en/e5/2d1e3bd129be04e10000000a114084/frameset.htm
    Hope this clears your doubt...

  • How can I sort Notes, alphabetically, on iPhone 4s with IOS 8?

    How can I sort Notes, alphabetically, on Phone 4s with IOS 8?
    I just got iCloud setup and am synching between icloud and iphone.  I have loaded some notes to convert over from blackberry.
    So how can I sort Notes alphabetically on iPhone??
    Was easy to do on blackberry and but I can't figure out how to do that on iPHone
    What am I missing?

    Notes are sorted by the time on the iPhone. There is no way to re-sort them.
    Cheers,
    GB

  • Wifi sync not working on iPhone 5s with iOS 8.0.2

    I have an iPhone 5s with iOS 8.0.2, and iTunes 12.0.1.26. Sync via wifi doesn't work (with one partial exception[1]). USB sync works fine, but when the phone isn't physically connected via a USB cable, iTunes doesn't know it exists. On the phone, in Settings/iTunes Wi-Fi Sync, "Sync Now" is disabled and it says "Sync will resume when '[my computer name]' is available". It's got the correct computer name.
    In the online help, I find the following claim:
    When the computer and the iOS device are on the same network, the iOS device will appear in iTunes.
    In my case, the computer and the iOS device are on the same network, and the iOS device does not appear in iTunes. I had a previous iPhone 5S which was able to sync via wifi to the same desktop computer on the same network. That one may have been iOS 7 (I can't check because it tried to learn to swim).
    The checkbox in "Summary" is checked:
    I tried unchecking it, applying, checking again, and applying again. I then restarted both iTunes and the phone.
    [1] Partial Exception: I found an "answer" on here where you turn off three different random features on the iPhone, turn them back on, reboot the iPhone and the computer, and then WiFi sync does actually works -- exactly once. Now it's disabled again. All that fussing around was enormously more hassle than just finding a USB cable; if I wanted to spend half an hour performing 10-second tasks I'd have bought another Motorola product.
    Is there a solution that works permanently, or do we just wait for a fix in a future OS revision?

    On your iPhone 4S go to Settings > Wi-Fi. Click on Wi-Fi to both disable and enable it. If you are still unable to enable this setting it may be possible that the iOS7 update did not take properly.

  • Location based reminders option not available on iPhone 6plus with iOS 8.1

    Location based reminders option  (within Reminders app) is not available. I can open the app and create a reminder based off time, but there is no option present to specify location. I have location services enabled. The Reminders app is not listed in my apps eligible to use Location services, but it's never asked... because it's not an option in the app to select.
    iPhone 6plus with iOS 8.1

    Try using Siri to set the reminder, something like "remind me to call mom when I leave home". It should either know or ask what "home" is and that may initiate the location services. I did confirm that location services are available on the latest OS for the iPhone plus (just checked mine).

  • Screen not rotating on iPhone 6 with iOS 8

    The screen is not rotating even though rotation is enabled and it is in standard view. This happens with all apps both Apple and third party.

    I have the same issue too. It's intermittent and can sometimes be fixed by turning the iPhone off then on again. Some of my photos are up the wrong way because the camera app didn't rotate to landscape mode when taking the photo. My wife has a 6 too with nil issues.
    I rang Apple who said to restore the iPhone to see how that goes but I haven't had the time yet.
    Would like to hear from anyone who had this issue and fixed it.

  • Spotlight does not work on iphone 6 with ios 8.1.2

    Since a few weeks the spotlight search does not work anymore on my iphone. I tried removing all subjects in the setiings menu and adding them again.

    No, it should work with the iPad. It's not a matter of what version of iOS is on the device.
    The card reader has never been compatible with any iPhone. It is compatible with iPads.
    ~Lyssa

  • How to identify whether a multiline container is empty or not in Workflow?

    Hi Experts,
    Does any1 know how to identify whether a multiline container
    is empty or not in a workflow?
    Thanks.
    Points wil be rewarded.
    Vincent

    Dear Vincent,
    You can get the report name for the Business Object which contains the multi-line container, from the BO itself. Put a break-point in the report and try executing the workflow. The multiline container is like an internal table in the report. See if the internal table is initial while execution.
    Regards,
    Michael.

  • How to identify, whether your iphone is permanently unlocked or not?

    How to identify, whether your iphone is permanently unlocked or not?

    gautam30 wrote:
    How to confirm?
    Did you not read wjosten's reply?

  • How to identify whether my query is been already transported or not?

    Hi all,
    How to identify whether any transport request are created for my query. And also how to identify whether the query in the production is been transported to the QA.
    Thanxs
    Haritha

    Hi haritha,
    Once the request is generated u can write the request number and chk in the other server STMS ...if u find the request thr ur transportation should be sucessful
    chk this link...
    http://help.sap.com/saphelp_nw04/helpdata/en/b5/1d733b73a8f706e10000000a11402f/content.htm
    It is very simple ,
    Goto RSA1> Trasport connections> drag & drop ur query to right side panel--> observe the coulmns ( pakage column ) --> If the pakage is $TMP u can sy that that perticular query is not transported ---> If it other than $TMP ( That query has Transported alreay).
    Assign points if helpful
    Cheers
    Raj

  • How to identify whether that particular process chain is active or not?

    Hi all,
    How to identify whether that particular process chain is active or not ?
    thanxs
    haritha

    If see the process chain then it will not be greyed out if it is active. Or else check in these tables.
    RSPCCHAIN
    RSPCCHAINT
    to check the logs
    RSPCLOGS               
    RSPCPROCESSLOG
    Give the chain name and check in the object version.
    Khaja

  • How to identify whether the data extracted is direct, queued, unserialized

    hi,
    how to identify whether the data extraction from r/3 is direct, queued and unseralized data.
    can anyone let me know abt it
    regds
    hari

    hI,
    Direct Delta: With this update mode, the extraction data is transferred with each document posting directly into the BW delta queue. In doing so, each document posting with delta extraction is posted for exactly one LUW in the respective BW delta queues.
    This update method is recommended for the following general criteria:
    a) A maximum of 10,000 document changes (creating, changing or deleting documents) are accrued between two delta extractions for the application in question. A (considerably) larger number of LUWs in the BW delta queue can result in terminations during extraction.
    b) With a future delta initialization, you can ensure that no documents are posted from the start of the recompilation run in R/3 until all delta-init requests have been successfully posted. This applies particularly if, for example, you want to include more organizational units such as another plant or sales organization in the extraction. Stopping the posting of documents always applies to the entire client.
    Queued Delta: With this update mode, the extraction data is collected for the affected application instead of being collected in an extraction queue, and can be transferred as usual with the V3 update by means of an updating collective run into the BW delta queue. In doing so, up to 10000 delta extractions of documents for an LUW are compressed for each DataSource into the BW delta queue, depending on the application.
    new queued delta
    This update method is recommended for the following general criteria:
    a) More than 10,000 document changes (creating, changing or deleting a documents) are performed each day for the application in question.
    b) In future delta initializations, you must reduce the posting-free phase to executing the recompilation run in R/3. The document postings should be included again when the delta Init requests are posted in BW. Of course, the conditions described above for the update collective run must be taken into account.
    Non-serialized V3 Update:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
    unserialized v3 update
    This update method is recommended for the following general criteria:
    a) Due to the design of the data targets in BW and for the particular application in question, it is irrelevant whether or not the extraction data is transferred to BW in exactly the same sequence in which the data was generated in R/3.
    take a look Roberto's weblog series
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    https://weblogs.sdn.sap.com/pub/wlg/126 [original link is broken] [original link is broken] [original link is broken]
    doc
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    and oss note 505700
    Re: delta methods
    go throuth the previous thread
    Delta types
    hope it helps..

  • How to identify whether any data source is created for a table?

    hi all,
    How to identify whether any extractions is been carried out for a particular table, view or function module(generic extraction)? from r/3.
    bcos i need to create an extraction for a table, view and function module. But  iam not sure whether any extractions is already been created for those tables, view, function modules??
    thanxs
    haritha

    Hi,
    By passing the following values as selection to table  ROOSOURCE we can find whether any data source has been created or not .
    EXMETHOD = V
    EXTRACTOR = Table name
    hope it helps..
    regards,
    raju

  • I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?

    I'm using a mid 2014 13" rmbp. I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?

    It's something to do with the main user account (not iTunes account) on my Mac because I logged in with another account and it downloaded fine, I installed it on the HDD and even though the date in App Store was 16th October 2014, it is the full installer of 10.10.2.
    To try to resolve this problem, I have copied the installer app elsewhere and deleted it but App Store still will not allow me to download it with my main user account yet just allowed me to update iTunes.
    I had a brainwave last night that it might have been related to me changing the default downloads folder to one not on my boot drive (to save disk space on my main boot drive) but having changed it back, tried again, rebooted and tried yet again, deleted my App Store preferences. nothing has worked.

Maybe you are looking for

  • How do I select just one audio channel in Final Cut Pro X?

    I know this has been asked and answered somewehre... and I'm pretty sure the answer is simple. But I don't have hour's to search the net. And the FCPX "Help" feature just ****** me off.... I recorded voice on channel 2 and shotgun nat.sound on channe

  • "The windows installer service could not be accessed" on windows 7 64x

    Hello, I'm trying to install an application and i get the following error" "The windows installer service counld not be accessed. This can occur if the Windows installer in not correctly installed. Contact your support personnel for assistance". When

  • FM to get TOP_WI_ID( workitem ID)

    hello, i need a FM to get the top wi_id s. By wi_id, i mean the workitem id that you see in transaction BBP_PD for a purchase order.I've used FM SAP_WAPI_CREATE_WORKLIST and there are cases where i get a subsequent workitem id. You can find the top_w

  • Regarding VF03 - pricing condition

    in transaction VF03 , small change needs to be done. When necessary the invoices we make to Public Administration must show  an accurate amount.  In some cases net amount plus taxes amount do not suit  the total invoice and makes it  no legal so the

  • Connecting To Internet On A Mac Laptop

    Hello, I have a BEFW11S4 Ver. 4 Router, On a Windows XP desktop. I am trying to get internet connection on my MAC laptop. Ive put the network and WEP password into my laptop but it doesnt connect. No matter what. I called linkseys and they told me th