How to identify whether your IPhone 4 is a factory Unlock phone?

I got my phone as a present and i want to find out whether its a factory unlock or not..is there any way to determine or a code or something to indicate that its a factory unlock phone????
thank you..

You can try calling Apple technical support and giving them the serial number of the iPhone. They may be able to tell you, but it's not guaranteed.
Regards.

Similar Messages

  • How to identify, whether your iphone is permanently unlocked or not?

    How to identify, whether your iphone is permanently unlocked or not?

    gautam30 wrote:
    How to confirm?
    Did you not read wjosten's reply?

  • How to know whether my IPHONE 3G S is factory unlocked ?

    Hi,
    I have recently bought iphone 3G S but i dont know whether it is factory unlocked or not. Is there any other way i can confirm whether my iphone is factory unlocked or not ? Please help
    Thanks
    imran

    There is no such thing as a "factory unlocked iphone". Whether an iphone is available as unlocked or not is determined by the carriers that Apple has contracts with or if required by law where the iphone is sold. The unlock is, however, through the carriers, not Apple. Most of the time when someone posts as you do, they have a hacked phone, not an officially unlocked phone. If you restore or update your software, through itunes, the phone will be locked to the carrier it was originally locked to if not officially unlocked.

  • My iphone 3gs factory unlocked phone frequently goes into recovery mode. can anyone help me out from this?

    my iphone 3gs is an factory unlocked phone running on ios 6.1.3 which frequently goes into recovery mode. mostly atleast once in a week...how can i fi this problem???

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • How to identify whether Technical Content is been installed or not?

    Hi all,
    Can anyone let me know how to identify whether technical content in BW 3.5 is been installed or not?
    thanxs
    haritha

    Hi Haritha,
    Check this PDF,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
    And this link also,
    http://help.sap.com/saphelp_nw04/helpdata/en/e5/2d1e3bd129be04e10000000a114084/frameset.htm
    Hope this clears your doubt...

  • How to check whether my iphone is factory unlocked?, how to check whether my iphone is factory unlocked?

    how to check whether my iphone is factory unlocked?

    There is an easy way to confirm if an iPhone is factory unlocked or not, by using its IMEI.
    Just check your IMEI number at this website : http://www.imei.info/
    You will get all details including warranty and sim lock.
    Thank you.

  • How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app?  When I leave the car and return to continue hearing a book, it has switched to iTunes.

    How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app?  When I leave the car and return to continue hearing a book, it has switched to iTunes.

    The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
    The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
    This is designed to be done right away with a new iPhone.
    If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

  • How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time

    How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time

    How are you dialing these calls?

  • How can you get your iPhone videos to compress to one video instead of 5 different frames?

    How can you get your iPhone videos to compree to one video instead of different frames

    It sounds like you to 5 separate videos. If you start recording, then stop it, then start it again, you will have 2 videos. Not 1. As for splicing them together, you will need a video editing package for your PC. I don't know if Windows Movie Maker (or whatever they're calling it now) can handle this or not. On a Mac, I'd say just use iMovie.

  • How do you add your Iphone to another computer once you have already added it to a different computer.

    My home computer is no longer working. How do you addf your Iphone 4 to a different computer for updates and sync?

    Plug it in and sync it.
    It will erase the current content and replace with content from the new computer, as is the design of the iphone.
    Use your backup copy of your home computer to put everything on the new computer.

  • How do you get your iphone out of the connect to itunes screen?

    How do you get your iphone out of the connect to itunes screen?

    What error message is it displaying? Check this Apple support document for information on specific error messages when restoring the iPhone. http://support.apple.com/kb/ts1275

  • HT4993 How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time

    How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time

    How are you dialing these calls?

  • How to identify whether a multiline container is empty or not in Workflow?

    Hi Experts,
    Does any1 know how to identify whether a multiline container
    is empty or not in a workflow?
    Thanks.
    Points wil be rewarded.
    Vincent

    Dear Vincent,
    You can get the report name for the Business Object which contains the multi-line container, from the BO itself. Put a break-point in the report and try executing the workflow. The multiline container is like an internal table in the report. See if the internal table is initial while execution.
    Regards,
    Michael.

  • How to identify whether any data source is created for a table?

    hi all,
    How to identify whether any extractions is been carried out for a particular table, view or function module(generic extraction)? from r/3.
    bcos i need to create an extraction for a table, view and function module. But  iam not sure whether any extractions is already been created for those tables, view, function modules??
    thanxs
    haritha

    Hi,
    By passing the following values as selection to table  ROOSOURCE we can find whether any data source has been created or not .
    EXMETHOD = V
    EXTRACTOR = Table name
    hope it helps..
    regards,
    raju

  • How to identify whether a TCode is for SAP query or for a customized TCode

    Hi,
    We have a list of TCodes starting with Y_*
    Some of these TCodes could be related to SAP Queries and some could be real custom transactions. How do I find out which one of those are related to SAP queries and which ones are related to custom SAP transactions?
    I have already checked table TSTC for the program names of these Transactions, but the program name field (PGMNA) is blank. Also in TCode SE93 the transaction mentioned is START_REPORT. Also for some, when I go to the transaction (Y_*) and then environment->status to check the program name the values found are something like AQ11FI==========F10A==========.
    Please help on how to identify whether a TCode is actually for an SAP query or for a customized transaction.
    Thanks in advance.
    Mick

    Thanks Anil.
    In TSTC, the filed for program name is blank. Therefore I would have to go to each and every transaction (I  have around 250 Y_* TCodes with me) and then to environment->status to get the program name and then check whether it is A......
    Is there any easier way to know whether a TCode refers to an SAP query or a custom developed transactions/program.
    Mick

Maybe you are looking for

  • Can't transfer items bought on iphone to itunes

    I'm getting a notice there's a new version of my iphone OS. But when I click on update, it tells me I have items I purchased on my iphone that haven't been transferred to my itunes library and I should do that before updating. So I go to the tabs for

  • Open file in imovie

    I am making a presentation of pictures timed with music on iMovie. I then finalized/published it and moved it to iDVD. The iMovie file was accidently moved to the trash, but i still have the iDVD file. i recovered the iMovie file from the trash but I

  • Playing iPod Video through the TV

    I recently purchased the AV Connection Kit. I set it up and successfully played videos and sound from my iPod through the TV. However, when I try to play regular music I do not get any sound. Since the sound from my videos plays, why not normal music

  • XML as DataSource for JSF app

    I am using xml files as the data for a JSF app. I know how to use dataproviders attached to databases in order to display and update data to and from the jsf page. Is there a simple way to do this with XML as the data source?

  • Looking for the Mac OS 9 iDisk Public Folder icon

    I was wondering if anyone could help me out. I'm creating an icon set of Mac OS 9 icons for OS X. I've been able to locate the regular iDisk icon, as it's stored in the Mac OS 9 "System" file. But, what I can't seem to locate is the iDisk Public fold