How to identify which applicarion is using the DVD burner?

How to identify which applicarion is using the DVD burner? Ot is not allow me to burn the DVDs genetrated in the Final Cut 7

I think you'll find that the application is Final Cut Pro... the message is bug. I get a similar message when disconnecting external drives after using them with FCP (even when the project is no longer loaded.)
As I mentioned above, the accepted workflow is to export the sequence to one of your hard drives using the Export>QuickTime Movie path with Settings:Current Settings and Make Movie Self-Contained checked like this:
This gets you a high quality "master copy" which you open in Compressor for transcoding. You should use the DVD: Best Quality setting for the duration of your movie.
this gets you the high quality MPEG-2 and AC-3 files for DVD Studio Pro authoring.
If you've never used DVD Studio Pro before, you can use iDVD instead. For iDVD, you just drag and drop your "master" on iDVD and it takes it from there. Both make a very professional product.
hope this helps.

Similar Messages

How to identify which key figure will the numeric pointer for deltas?

Hi All,
I have created a numeric pointer for generic extraction ? but how to identify which key figure will the numeric pointer will use for deltas ?
how to identify the key figures which is suitable for numeric pointer. And the generic extraction is based upon the copa table?
Can anyone suggest me how the numeric pointer works and how to identify deltas are carried out at numeric pointer?
Thanks
Pooja

Pooja,
If you are using a generic extractor which is based on COPA table, then numeric pointer may not be the suggested delta extraction mechanism.
A time stamp would be the better one to use. In a time stamp, you can give a lower limit value of 300 seconds.. so that it will try to fetch the missed records.
Moreover, a delta would be based on a character, preferably a time char.
In your requirement, try to figure out the character on whichdeltas will be based.
Sasi

How to identify Which ports are using in RAC setup?

Hi,
how to identify Which ports are using in RAC setup?
Thnaks,

[Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

How to install snow leopard without using the dvd drive?

Is it possible to install snowleopard without using the dvd ? i have a macbook and i have unfortunatly broken the cd and dvd player..

Yes you can.
How to use Migration Assistant:
http://support.apple.com/kb/HT4889?viewlocale=en_US
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963

How to find which user is using the index?

Hi All,
I have an index named 'CTXT_ITEM_CODE' . The Index _type is Domain. When i try to drop this index its telling ORA-00054: resource busy and acquire with NOWAIT specified error
now i need to find out which session is using this index, so that i can kill it and drop the index.
Thanks

SELECT c.owner,
       c.object_name,
       c.object_type,
       b.SID,
       b.serial#,
       b.status,
       b.osuser,
       b.machine
FROM v$locked_object a, v$session b, dba_objects c
WHERE b.SID = a.session_id AND a.object_id = c.object_id
AND c.object_name='CTXT_ITEM_CODE';
ALTER SYSTEM KILL SESSION '<sid, serial#>'

How to Preview on TV prior to the DVD burn

I was wondering if is possible to preview the finished iDVD project on a tv monitor prior to the final dvd burn. I'd like to see how all the font looks prior to burning.
Thanks in advance.
John
Mac Pro Mac OS X (10.4.9)

A few additional helpful links:
http://www.videoguys.com/ADVC.html
http://dv411.com/advc100.html
http://www.canopus.com/products/videoconversion.php
http://youtube.com/watch?v=eWRzYMsNEZM
Disclaimer: Canopus does not pay me to endorse their producrt/s. I only recommend these products because I have seen them work in practice. That and I also use Canopus on my own system/s. No one pays me to endorese any of the the above mentioned products.

Connecting a iBook to a dell to use the DVD burner

How do you connect to a Mid-2005 iBook to a Dell running Windows XP Home edition SP2 to burn a DVD with its drive?

I'm sure there are some free apps that would let you burn a disk image in XP. Get one, and then in iDVD under the "File" menu heading, select "Save as Disc Image" or even "Save as VIDEO_TS", then use the app you locate for XP to burn it.
Again, a few quick searches don't turn up any ways to do what you are asking, so it either
a) isn't easy to do
or
b)can't be done.

How do I get permission to use my DVD burner in photoshop elements.?

I get a message telling me I cannot export my slide show to my DVD burner because I do not have permission to create a file at the specified location.
Why not?

Hello Andy,
You may find the
Can I legally use the Office icons in a website? and
can I legally show Microsoft Office and Project icons in my desktop application? forum threads helpful.

How to identify which process is using PSA?

Hi all,
Does anybody know if there is some way to identify all infopackages in my environment that are using PSA?
Thanks in advance,
Silvio Messias.

Hi Guys, just to thanks you...
I have created this ABAP program... Enjoy...
*& Report ZLIST_OF_IP_THAT_USE_PSA
REPORT zlist_of_ip_that_use_psa.
Data declaration
TABLES: rsldpsel, rsldpio.
TYPES: BEGIN OF ty_rsldpsel,
         logdpid       TYPE rslogdpid,
         objvers       TYPE rsobjvers,
         lnr           TYPE rsnrchar,
         ziel          TYPE rsziel,
         ziel_text(40) TYPE c,
         source        TYPE rsisource,
         logsys        TYPE rsslogsys,
         oltpsource    TYPE rsisource,
       END OF ty_rsldpsel,
       BEGIN OF ty_rsldpio,
         logdpid       TYPE rslogdpid,
         objvers       TYPE rsobjvers,
         source        TYPE rsisource,
         logsys        TYPE rsslogsys,
         oltpsource    TYPE rsisource,
       END OF ty_rsldpio.
DATA: l_is_rsldpsel TYPE STANDARD TABLE OF ty_rsldpsel,
      l_ih_rsldpio TYPE HASHED   TABLE OF ty_rsldpio
                    WITH UNIQUE KEY logdpid objvers.
FIELD-SYMBOLS : <ls_rsldpsel> TYPE ty_rsldpsel,
                <ls_rsldpio> TYPE ty_rsldpio.
RANGES: rg_ziel FOR rsldpsel-ziel.
Processing data...
PARAMETERS : psa_used AS CHECKBOX DEFAULT 'X'.
START-OF-SELECTION.
PERFORM collect_data.
END-OF-SELECTION.
PERFORM display.
*&      Form COLLECT_DATA
      Collecting database information
FORM collect_data.
Valid range of ZIEL
CLEAR: rg_ziel, rg_ziel[].
rg_ziel-sign   = 'I'.
rg_ziel-option = 'EQ'.
rg_ziel-high   = space.
rg_ziel-low    = 1. APPEND rg_ziel.
rg_ziel-low    = 2. APPEND rg_ziel.
rg_ziel-low    = 3. APPEND rg_ziel.
IF psa_used IS INITIAL.
    rg_ziel-low = 4. APPEND rg_ziel.
ENDIF.
Selection all INFOPACKAGES that are using PSA tables
SELECT logdpid objvers lnr ziel
    INTO TABLE l_is_rsldpsel
    FROM rsldpsel
    WHERE objvers EQ 'A'
      AND ziel IN rg_ziel.
IF sy-subrc EQ 0 AND l_is_rsldpsel[] IS NOT INITIAL.
    DELETE ADJACENT DUPLICATES FROM l_is_rsldpsel COMPARING logdpid.
Selecting data from RSLDPIO
    SELECT logdpid objvers source logsys oltpsource
       FROM rsldpio INTO TABLE l_ih_rsldpio
       FOR ALL ENTRIES IN l_is_rsldpsel
       WHERE logdpid EQ l_is_rsldpsel-logdpid
         AND objvers EQ l_is_rsldpsel-objvers.
ENDIF.
LOOP AT l_is_rsldpsel ASSIGNING <ls_rsldpsel>.
    CASE <ls_rsldpsel>-ziel.
      WHEN 1.
        <ls_rsldpsel>-ziel_text = 'Only PSA'.
      WHEN 2.
        <ls_rsldpsel>-ziel_text = 'PSA in parallel mode'.
      WHEN 3.
        <ls_rsldpsel>-ziel_text = 'PSA and after that to Infoprovider'.
      WHEN OTHERS.
        <ls_rsldpsel>-ziel_text = 'Directly to Infoprovider'.
    ENDCASE.
    READ TABLE l_ih_rsldpio ASSIGNING <ls_rsldpio>
    WITH TABLE KEY logdpid = <ls_rsldpsel>-logdpid
                   objvers = <ls_rsldpsel>-objvers.
    IF sy-subrc EQ 0 AND <ls_rsldpio> IS ASSIGNED.
      <ls_rsldpsel>-source     = <ls_rsldpio>-source.
      <ls_rsldpsel>-logsys     = <ls_rsldpio>-logsys.
      <ls_rsldpsel>-oltpsource = <ls_rsldpio>-oltpsource.
    ENDIF.
ENDLOOP.
ENDFORM. " collect_data
*&      Form DISPLAY
      Displaying database information
FORM display .
TYPE-POOLS: slis.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
        gs_layout   TYPE slis_layout_alv.
PERFORM fieldcat_init USING gt_fieldcat[].
PERFORM layout_init USING gs_layout.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = 'Z_DB_ENTRIES_COUNTER'
      is_layout          = gs_layout
      it_fieldcat        = gt_fieldcat[]
    TABLES
      t_outtab           = l_is_rsldpsel.
ENDFORM.                    "DISPLAY
*&      Form fieldcat_init
FORM fieldcat_init USING lt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname    = 'LOGDPID'.
ls_fieldcat-datatype     = 'C'.
ls_fieldcat-seltext_l    = 'InfoPackage (ID)'.
ls_fieldcat-seltext_m    = 'InfoPackage (ID)'.
ls_fieldcat-seltext_s    = 'InfoPackage (ID)'.
ls_fieldcat-reptext_ddic = 'InfoPackage (ID)'.
ls_fieldcat-key          = 'X'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname    = 'SOURCE'.
ls_fieldcat-datatype     = 'C'.
ls_fieldcat-seltext_l    = 'InfoSource'.
ls_fieldcat-seltext_m    = 'InfoSource'.
ls_fieldcat-seltext_s    = 'InfoSource'.
ls_fieldcat-reptext_ddic = 'InfoSource'.
ls_fieldcat-key          = ' '.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname    = 'LOGSYS'.
ls_fieldcat-datatype     = 'C'.
ls_fieldcat-seltext_l    = 'Source System'.
ls_fieldcat-seltext_m    = 'Source System'.
ls_fieldcat-seltext_s    = 'Source System'.
ls_fieldcat-reptext_ddic = 'Source System'.
ls_fieldcat-key          = ' '.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname    = 'OLTPSOURCE'.
ls_fieldcat-datatype     = 'C'.
ls_fieldcat-seltext_l    = 'Datasource'.
ls_fieldcat-seltext_m    = 'OLTPSOURCE'.
ls_fieldcat-seltext_s    = 'OLTPSOURCE'.
ls_fieldcat-reptext_ddic = 'OLTPSOURCE'.
ls_fieldcat-key          = ' '.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname    = 'ZIEL_TEXT'.
ls_fieldcat-datatype     = 'C'.
ls_fieldcat-seltext_l    = 'Type of processing'.
ls_fieldcat-seltext_m    = 'Type of processing'.
ls_fieldcat-seltext_s    = 'Type of processing'.
ls_fieldcat-reptext_ddic = 'Type of processing'.
ls_fieldcat-key          = ' '.
APPEND ls_fieldcat TO lt_fieldcat.
ENDFORM.                    "fieldcat_init
*&      Form layout_init
FORM layout_init USING ls_layout TYPE slis_layout_alv.
ls_layout-zebra             = 'X'.
ls_layout-colwidth_optimize = 'X'.
ENDFORM.                    "layout_i

How to identify Which function modules are used in the planning area?

Hi all,
there are couple of function module derviation is used to derive the calendar year, month, fiscal period etc.
But how to identify which function module is used in which planning area?
I cant find out from the where used list from function modules?
Thanks
pooja

Hi Pooja,
Go to characteristic relationship tab,click on detail icon on extreme left of the derivation,there you will get the name and the details of function module used for derivation.
Regards,
Indu

How to identify which record(s) the user hasbeen checked

i have a internal table in which first field is represented as check box in the output .
like bellow
loop at g_it_final into g_wa_final.
        write : 5 sy-tabix ,
               20 g_wa_final-g_v_check as checkbox,
               25 g_wa_final-TRKORR,
               40 g_wa_final-AS4TEXT.
endloop.
now the user will select some records from the output checking the check box
NOW the QUESTION is
how to identify which record(s) the user hasbeen checked(selected) ?
so that i can disply only the selected records in the secondary list.

Hi,
You will have to use the 'READ LINE' command within a loop to retrieve the data back into your program.
You may want to use the HIDE command to ease the retrieval of the checkbox value.
Check out the online help for both of these.
Darren

How to identify which root certificate is used?

How to identify which root certificate(on terminal) is used when a terminal is connecting to a https website?
SecurityInfo.getServerCertificate() only returns the certificate send from the https server.
But how could know the which local root certificate is used to verify the certificate send from the https server?
Is there a method or class in MIDP 2.1?
Thanks

UP�Cthis question is urgent. Hope anyone can answer me!

I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please?

If any one could help me with this. i'd be enternally grateful as i'm getting nowhere on my own!
I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please

The only way to get 10.5 is to purchase it on CD. Such as http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC where is being sold for $179.99.
If your optical drive is broken, you will either need to replace it or get an external. There is no other way.
Why do wish to upgrade? As you can see it is going to be expensive, probably more the Mac is worth.
Allan

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

To see what reports are running, take a look at the execution log views that are available in the database. Which views that are available are dependent on your version of SSRS.
http://technet.microsoft.com/en-us/library/ms159110.aspx
To see which application is using SSRS is a little more difficult. You can turn HTTP logging on, which will give you an idea of where connections are coming from, so you can see IP addresses. You can also look at the execution log view to see
user accounts. So, depending on your environment and use of service accounts, this could be easy, or difficult.
http://technet.microsoft.com/en-us/library/bb630443.aspx
If all else fails you can look for clues in the SSRS logs. Good luck...

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

mr
Are you running the 9.0.1 Update of the program and on what computer operating system is it running?
Is your video card/graphics card driver up to date according to the manufacturer of the card?
Is your computer optimized, including maintenance of pile ups of preview files, conformed audio files, and conformed video files?
Do you have the latest version of QuickTime installed on your computer with Premiere Elements 9.0/9.0.1?
What are your project settings and what are the properties of your source media? When you say that "used to be able to export...." is that on the same computer, same brand/model/settings for the camera recording the video now in use, same Premiere Elements 9.0/9.0.1?
Where player are you using for the playback of these exports?
Please give us more details on the size of the projects (then and now) as well as details of the customized export settings in your Share/Computer/ route. Premiere Elements 9.0/9.0.1 is only a 32 bit application running in 32 bit or 64 bit system. Not sure if computer resources might be taxed more so now than before.
More later.
ATR

How to identify which applicarion is using the DVD burner?

Similar Messages

Maybe you are looking for